Delete audio after saving presentation "with" audio

After saving a presention with the option to save audio "with" the presentation, I can no longer delete audio from any slide. Is there a way to delete audio in this scenario?

Hello and welcome to the forum,
Seth answered about the choice when importing the PPT. You can add a click box to each slide, it will pause the slide at the end of the click box timeline, so be sure to adapt that timeline.
Do you want to add audio in Captivate? You have to know that every PPT-slide will be converted to sort of a video slide in Captivate, which makes synchronizing with audio not that easy.
Adobe Presenter would be easier to use (and be sure, I am a Captivate freak myself, but will rarely use PPT, but directly Captivate)
Lilybiri

Similar Messages

  • Import PowerPoint presentation with audio

    Hello,
    I received a PowerPoint presentation with audio which I'm trying to import into Captivate. I can import the presentation just fine but the audio is not included.
    Did I miss something?
    Kind regards,
    Patrik

    Hi there,
    Thank you for reaching Adobe Community.
    Which version of Captivate you are using?
    Is the powerpoint presentation a .ppt or .pptx?
    Thanks!

  • How can i stream my powerpoint presentation with audio video content to the display devices

    i wanted to stream my Power point presentation with audio/video content inserted in between the slides how can i achieve this requirements
    is there any harware or software available for this
    Please let me know
    Thanks

    This is not a straightforward procedure. I normally take the exported PPt file onto a windows machine and import the video files into PPt before sending to a client
    Once the folder is copied to windows, the video files have to be imported  again manually to relink the files as they loose the link in the export
    Check that the video files are copied into the same folder as the Powerpoint file
    The only file types playable from Powerpoint in widows are:   mpeg   wmv   avi
    Use wmv for  best quality and compatibility

  • Saving a powerpoint presentation with audio as a movie

    Hi there
    I'm stumped. have a powerpoint presentation with embedded audio and would like to save it as a movie for upload.
    any recommendations on how to do this?
    I tried the powerpoint 'save as movie' command but it didn't preserve the timings or audio.
    Thanks!

    Hi,
    If the PowerPoint presentation is self-running (you've set the presentation to use the timings you rehearsed), the only way I know of is to use video capture software. PowerPoint's export movie command seems more or less useless. One recommended by MacWorld is Snapz Pro X2 w/video capture. I've used it successfully to capture a 30 minute presentation complete with 44.1 hz/16 bit CD quality audio narration/score at 1200 x 900 resolution. This is on a Unibody MacBook Pro, which is rather impressive, given the computer is both playing the presentation and capturing both video and audio and saving to disk. However, there are other video capture apps that might also work, such as iShowU HD. I've only used Snapz Pro so far.

  • How do I play Powerpoint presentations with audio with Keynote?

    Can someone please point me in the right direction? Like a lot of people, I have several powerpoint presentations that I obtained while I was a Windows user. While Keynote can open them and play some of the transitions, many of the effects will not play, including the audio.
    Is there a way I can reformat the presentation so I can view/play it properly in Keynote? I am wanting to resolve this issue so I can remove MS office for Mac from my machine.
    I would be most grateful for any help that anyone could provide with this enquiry.

    Keynote isn't at all good at dealing with audio, so whether it's worth trying largely depends on the content of your powerpoints and how many you need to transfer.
    If it were me, I think I'd look at using OpenOffice - it may make a better job of things for you.

  • Need to play Power Point Presentation with Audio in Keynote

    My wife and I have lots of Power Point slide shows with audio from the days when we were windows users. We have downloaded a trial version of iWork 09 and would like to know how we can play these .pps files that contain audio in Keynote.
    We appreciate any help that anyone could provide as we would much prefer to use Keynote/iWork than MS Office.

    That's interesting about NeoOffice. I keep a copy of it up to date but don't use it too often.
    This may be too involved for the OP but I would play the file in NeoOffice and record the audio with WIreTap or similar, export it as an MP3 file and then import it into Keynote.
    WIreTap can have its input source set to Mac Audio so that it will record from any application that is capable of producing sound.
    http://www.ambrosiasw.com/utilities/wiretap/

  • Won't Change Back to Regular Audio After Setting "Encoded Digital Audio"

    I have a first generation Mac Pro, and I've just recently upgraded to Lion. I used to play a fair bit of DVDs on the computer, but recently I've slacked off doing that. Today I popped in a DVD to play and then opened DVD Player up. Everything worked fine as it was supposed to. I've got the DVD player set to send digital audio out so I can get surround sound through my receiver. When I quit DVD player I don't get sound anymore through the optical out unless it's encoded digital audio. I've had that problem before, and to solve it I'd go to Audio Midi Setup and change the format to what it was prior to being set to "Encoded Digital Audio" by DVD Player. However, now with the upgrade to Lion it will not switch back. The option to do it is there, and I can click on 16, 20, or 24bit audio all day long and I won't get audio output from that port unless I restart the computer.
    This is obviously a system bug that needs to be reported to Apple if they aren't aware of it already, but what I'm wanting to know is how can I avoid restarting to get audio back? Restarting Core Audio doesn't do the trick as I've already tried that.

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Cannot delete pages after saving a PDF in X Pro

    I am on Windows 7 and Adobe Acrobat XPro.  Every time I try to delete pages in any PDF after saving I get the error message "one or more pages are in use and could not be deleted".  the work around is to close the file and then reopen.  Then you can delete the pages.  It is annoying to have to shut and reopen the file everytime after making a change.  Is there a fix to this?

    Have you tried Help > Check for updates (in Acrobat)?
    That very annoying problem is fixed in XI. I seem to recall it could be fixed by updating X, but I could be mistaken. Please report back.

  • A weird character becomes another one after saving it with RSKC!

    When we load a master data from R3 to BW, get an invalid character error which shows the weird character is kind of like two vertical parallel bars (sorry I am unable to give it here since whenever I submit this question, it will become other characters which could confuse you guys), we run RSKC to input this weird character, when inputting it, it shows as it is, but after saving it, find it becomes ##.  And the data load still fails.
    Any solution?
    Thanks
    Message was edited by: Kevin Smith

    hi Kevin,
    check if helps
    RSKC and # sign in the middle of a word
    Permitted characters during BW data load
    Load problem.......Special Chars..Urgent..

  • Deleting chunk of video along with audio

    Hi,
    I recorded audio separately from video. I've dropped the audio into the project and synced it with the video (wasn't easy!). Now I want to delete a chunk of video and the corresponding chunk of audio, but when I select and delete the frames, the audio track stays unchanged.
    What's the solutio to this problem?
    Thanks,
    ib@fb

    You need to select both the clip and the audio track (in fact all clips covered by the audio track will be highlighted), position the playhead at the start of the part you want to delete then right-click Split Clip.  Both video and audio will split at the same place.
    Now move to the end of the part you want to delete and do the exactly the same (you will need to select the second part of the audio track plus the second part of the video clip).
    Finally delete the middle bit of the clip (the audio track attached to it will go too).
    Geoff.

  • Powerpoint converter hangs with converting PP presentation with audio

    Hi all,
    I've been using Captivate v5 before. Now I've starting Captivate 6 and now I've got an issue:
    When I import a Powerpoint presentation (2003) with a  voice over, made in powerpoint, the powerpoint converter hangs. No response on any click. The taskmanager gives a CPU load of a continues 15%.
    This procedure did work in v5.
    When I delete the voiceover in Powerpoint and import this presentation, it gives no problem. All the settings are default. Do I have to configure something??
    regards,
    Bert

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    Please try the below steps and then try to reimport the PowerPoint Presentation.
    Windows XP:
    Close Captivate.
    Go to C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 6
    Rename the Captivate 6 folder to anything.
    Try to reimport the project.
    Windows Vista/7:
    Close captivate.
    Go to C:\Users\[user name]\AppData\Local\Adobe\Adobe Captivate 6
    Rename the Captivate 6 folder.
    Hope this helps!
    Thanks!

  • Clips turn black after I synching with audio

    When I import my synched footage from Pluraleyes to FCPX the audio works but not the video and it's black. The same thing happens if I just try the nattive synch tool in FCPX.
    All my footage is off a 5D Mark3 and recoreded to WAV on a ZOOM h4N.
    Steps already taken:
    - Check Video Inspector
    - Checked boxes in ROLES
    - Clossed all apps and removed prefrences with manager

    I tried your example and have good news for you :-)
    You are *assuming* the clip is black, but it isn't.
    The problem with your example is that the audio clip is 6:24 long and the video is only 00:41 long.
    Furthermore, the actual video only begins around the 5:30 mark.
    Nevertheless, they sync PERFECTLY!
    Here is how the synchronized clip looks in its own timeline. Note how the audio starts at the beginning but the video only starts at about 5:30.
    You can add this synchronized clip to your project timeline and trim it there, or mark the in and out points in the event browser.

  • Creating a presentation with audio, video, narrative, and slides

    What is the best solution to create a presentation that shows a slide show with background music but also allows for a speaker to show some keynote slides in between. I'm giving a report of a recent mission trip abroad and would like to show pictures of the different regions we visited but also make comments and show slides along the way possibly including some video clips. I heard iDVD is good for the slide show. Any comments??

    Actually it's the other way round. iDVD is primarily for making DVD's. You can make a keynote presentation and export it for iDVD for display on a dvd player.
    Keynote has a range of transitions that determine how you move from one slide to the next. You should download the free trial if you haven't done so already. If you are putting together a presentation you should use keynote as it is primarily designed for presentaions
    M.

  • Premiere Pro dropped audio after export, AME no audio

    Similar problem in both premiere & AME - clips are exporting with video but no audio.
    When queueing up jobs in AME, they'll finish with no Audio & now even exporting directly from the timeline in Premiere Pro CC 2014.2 (just updated 2014-12-14) our clips still have no audio.
    All clips have conformed on the timeline before beginning export.
    This is happening despite trying these various solutions... re-installing Premiere, starting a new project, choosing a new Scratch Disk with 3 TB of available hard drive space... also our operating system is a 2014 3.5 GHz i7 32GB RAM iMac, running Mavericks with a 256 GB Flash Hard Drive, so RAM or HD speed should not be an issue?
    Any advice or a solution would be greatly appreciated.  We export dozens of jobs a day and cannot find a reason why this Adobe Premiere Pro & AME Software is not working correctly & giving us dropped audio upon export - very frustrating, thanks for the help...

    I have 2 macs, screenshot with identical export setting was from 2nd mac. if you can repro now here is a 2014.2 screenshot & same export settings on the 2014.2 mac; issue occurs on both computers thanks - also this timeline, before export I had audio on all tracks.  Here is a screenshot of the timeline post export; all of the audio is gone?  It was there at time of export

  • Adobe reader not open the file immediately after saving it  with Microsoft Office

    I have an older version Adobe Reader 9, and worked fine until today. I did the upgrade to Adobe Reader XI (11.0.06).
    I have Window´s Office 2010 on my computer. When I save a document on *pdf file, Adobe starts automatically and open the document (Open file after publishing.) After the upgrade, documents are not open automatically and shows the next message:  "There was an error  during initialization. An internal error ocurrred." and  "There was an error opening this document. Access denied.". But if I try manually, files are open. How do I fix this problem.

    I'm having a similar issue.  The .pdf files open fine locally, but when I put them up online, they will not open and I get the same error message.  If I download and save the files, they show a 1KB file size instead of 168KB.
    Drive space is not an issue (looking at over 225GB of free space on the main drive).
    In searching on-line, the main cause I am finding is receiving the file via e-mail and a decoding issue.  This is not the case with these files as they were created on my machine and uploaded using Filezilla to the server.  I'm using Acrobat Pro 7.0 on a windows box running Vista Ultimate.
    Any ideas on what would be causing this issue?

Maybe you are looking for