Delete BOTH an event and To Do at the same time?

Just getting a handle on the To Do feature - which I've never really used. I looked into some of the other GTD apps but I don't really need anything that in-depth right now, and I can use iCal to easily sync with my Treo. Anyway ...
I read another post with the tip of dragging an event from the calendar into the To Do list - that way it adds a header above the item (ie. Yesterday, Today).
But when I delete either the To Do or the event, the other one is still there. I'm guessing ical just copied the event, and doesn't actually link it somehow. Just a bit of a PITA as I have to delete both.
Has anyone found a soluton for this? TIA.

Ok let me clarify this, I got a internet connection, I got a router, Im having a problem with windows Vista when I boot up the computer its starting both the local area connection and the wireless connection at the same time, and when that happens it conflicts and cancels my internet connection, all the above suggestions I already have, done.
Im just wondering how do I setup the network so it won't conflict with the internet wireless connection and still keep the local connection alive on my home computers, or if I have to how do I shut off my local connection so that won't start up when I re-boot the computer or boot it from a cold start. Its not letting me shut down the Local Area connection when I boot with Vista, and giving me network errors!! GRRR!!
Message Edited by jughead4158 on 10-08-2008 07:28 AM

Similar Messages

Getting Logic master to send to both 1-2 and 3-4 at the same time

I have an native Instruments Audio Kontrol 1 'sound card' that I'm running 2 different sets of M-Audio monitors off of. My question i, can I run the master output to both 1-2 and 3-4 at the same time so I can easily check mixes on both sets of speakers without changing every single tracks output?
Also, is this possible to do in iTunes also? I can find nothing in Logic (or anywhere) that will allow this and I initially thought my device was broken until I simply choose 3-4instead of 1-2.
thanks so much!

Pancenter wrote:
Sampleconstruct wrote:
In Logic you could just setup additional sends of your Audio tracks using the send knobs and send the signal to a Bus. Set the outputs of that Bus to 3-4 and you'll have your signal played through 1-2 as well as 3-4.
Also, if any of the audio tracks used sends (reverb on a bus..etc) those would also have to be sent to the same bus as the audio tracks.
panleft-
How about routing all the outputs that are currently on Output 1-2 to a bus first then:
Option 1: Switching that bus's output between outputs 1-2 and 3-4 (for A/B comparisons)
or
Option 2: Use the Send on that bus's output to another bus, route that second bus's output to 3-4 (so both busses are sending audio to both sets of speakers simultaneously).
As an alternative, the Mackie Big Knob is a great hardware solution for routing a signal to 3 sets of speakers, allowing you to switch among them with simple button presses.
-droo

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

How to delete photos from iPhoto and hard drive at the same time.

I need to remove some files from my iMac G5 in order to free up some space. I have some photos on my machine that I would like to delete. Is there a setting I can change so that I completely remove a photo from my machine when I delete the iPhoto thumbnail? If not, what is the best way to remove photos from my machine, and not leave thumbnails in iPhoto to photos that no longer exist on my machine etc. I'm using iLife 08 and the most recent version of Leopard on a third generation iMac G5.

To remove file from iPhoto and the HD simply put the files in the iPhoto trash and then go iPhoto Menu -> Empty trash.
This works if you're using iPhoto in the default setting, where the files are copied to the Library on import. If, however, you have a referenced library, you'll need to trash the files in your own folder structure yourself.
Regards
TD

How to delete songs on itunes and hard drive at the same time?

hi guys. i have been looking around the forum and simply couldnt find and answer to my problem. when i delete a song from my itunes library it only deletes the song on itunes, and not from my harddrive. all my songs is allready in the itunes media folder. when deleting a song itunes gives me the option of Keeping the File or Deleting it From the Hard Disk, i always choose to delete from the hard disk as well but it is still in the itunes media folder.

To remove file from iPhoto and the HD simply put the files in the iPhoto trash and then go iPhoto Menu -> Empty trash.
This works if you're using iPhoto in the default setting, where the files are copied to the Library on import. If, however, you have a referenced library, you'll need to trash the files in your own folder structure yourself.
Regards
TD

Quite sometime ago, I attempted to download 2 episodes of Criminal Minds tv show. It downloaded for 2 days before I realized it. I stopped it and tried to delete both downloads after several more efforts with the same result. Every time I purchase AN

Some time ago, I attempted to download 2 episodes of Criminal Minds tv show. It downloaded for 2 days before I realized it. I stopped and tried to delete both episodes after several more efforts with the same result. Every time I ANYTHING now, those same two episodes show up again and start to download again! I can't make them go away! I have successfully deleted songs and audiobooks over the last year, but these tv shows won't stop downloading and delete. Any suggestions. Thanks - danafromcripplecreek.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split i have a new laptop and now it keeps asking for the old ID or it'll erase my apps bought on theold account.

Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help

See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2

IPAD3/IPAD2 :PDF files/ attachments sent in an email displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend's

IPAD3/IPAD2 :PDF files/ attachments sent in an email displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend’s PC. How do i get both my IPAD devices to display the PDF icons/attachments? Bearing in mind if i open the same email over the internet the PDF Icons/attachments display OK!
Has anyone come across this? Your advice/help would be most appreciated

This happens to me all the time.
If is a one page PDF it seems as though it comes over already open and inline in the body of the email. Multiple page PDF files show as the PDF icon.
I can't find any official documentation of this - other than based on my own experience with PDF attachments in my various email accounts.
Message was edited by: Demo

HT201338 adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

I have my Apple cinema display connected to my MacBook Air via the Thunderbolt port, but I also want to connect an ethernet cable.
Is there an adaptor that accepts both VGA and ethernet cables at the same time that can be plugged into the Thunderbolt port

Can I install lightroom on both a MacBook and a Windows with the same license??

Can I install lightroom on both a MacBook and a Windows with the same license??

Yes...the license is cross platform and allows 2 licenses installed (cross platform), not to be used at the same time.

How can i use both Windows and Mac os at the same time on my iMac

How can i use both Windows and Mac os at the same time on my iMac

You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

Bash script: Rotate your wallpaper and SLiM theme at the same time

EDIT;
I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
After writing:
#!/usr/bin
echo "Hello World!"
I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox. (It just looks so much cooler when both have matching backgrounds). By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing. But, on the off chance anybody finds use for it, here it is:
(this should be obvious, but: don't run this script without at least reading the comments)
#!/bin/bash
#this is a script to rotate a number of backgrounds
#to be shared by the fluxbox desktop and SLiM login manager.
#it is the first meaningful script I've written. It may be
#freely distributed and used with the understanding that you are
#using it at your own risk.
#Before running this script you need to check that your SLiM
#themes are installed to the path /usr/share/slim/themes, which
#is the defulat path for installation in Arch. Here are some
#other things you need to set up:
#1. create (if you don't have it) the directory /usr/share/wallpapers
#2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
#you current wallpaper to that filename
#3. set your window manager to display the wallpaper 'dummy', this works fine
#using a style overlay in fluxbox, I haven't tested it with any other window
#manager, but I don't see why this would cause a problem.
#4. create a directory /usr/share/slim/themes/current, you can copy one of
#your slim themes into that directory if you want. (this will prevent you
#from seeing some error messages the first time you run the script)
#5. define the names of the themes you want to rotate, in order for this
#script to work, you must name them "themeNUMBER", where NUMBER is replaced
#by an integer. Your themes must be numbered consecutively, start with 1
# that is:
#theme1 , theme2, theme3, etc. , theme305
#If you don't number consecutively, this script will not run properly. You
#must also define the total number of themes as "rotate_number"
#6. Check if the script runs, if it does, you should change /etc/slim.conf to
#use the theme "current"
#7. This theme will now rotate your SLiM theme and wallpaper in such a way as
#to make them match each other. Note that SLiM will not let you change themes
#"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
#restart SLiM. I run the script before I run slim in my etc/rc.local local
#script, so each time I reboot I get different wallpaper / login background.
#Fred Drueck 2008
#Define here all themes to be rotated and the total number of
#themes to rotate:
rotate_number=9
theme1=/usr/share/slim/themes/default
theme2=/usr/share/slim/themes/lake
theme3=/usr/share/slim/themes/lunar
theme4=/usr/share/slim/themes/flower2
theme5=/usr/share/slim/themes/the-light
theme6=/usr/share/slim/themes/mindlock
theme7=/usr/share/slim/themes/parallel-dimensions
theme8=/usr/share/slim/themes/wave
theme9=/usr/share/slim/themes/fingerprint
#check you are running this script as super-user:
if [ $(id -u) != "0" ]; then
echo "You must be the superuser to run this script" >&2
exit 1
fi
echo "rotating themes"
#figure out which theme is currently set, then name it as the variable
#"last theme number", otherwise set last theme number as 0
if [ -f /usr/share/slim/themes/current/current_theme_number ]
then
echo "checking current theme"
cd /usr/share/slim/themes/current/
eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
echo $last_theme_number
else
echo "no theme is currently set, using theme 1"
last_theme_number=0
echo $1 > /usr/share/slim/themes/current/current_theme_number
fi
#set the new theme number
eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
#select the new theme
placeholder=theme
eval new_theme=\$$placeholder$new_theme_number
echo $new_theme
#now clean out the "current" theme where I keep the current
#theme for slim
rm /usr/share/slim/themes/current/background*
rm /usr/share/slim/themes/current/panel*
rm /usr/share/slim/themes/current/slim.theme
#the wildcards are there since the themes use jpg and png files
cp $new_theme/background* /usr/share/slim/themes/current
cp $new_theme/panel* /usr/share/slim/themes/current
cp $new_theme/slim.theme /usr/share/slim/themes/current
#increase the theme number, but first clear the old file
rm /usr/share/slim/themes/current/current_theme_number
echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
#copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
#background file
cp $new_theme/background* /usr/share/wallpapers/dummy
exit 0
Last edited by pseudonomous (2008-07-07 21:59:42)

oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

Problem connecting Firewire device and external HD at the same time

Hi. I'm attempting to record digital audio through a Presonus Firepod A/D interface via a Firewire 400 to 800 cable connected to one of the Firewire 800 ports on a mid-2010 Mac Pro running Snow Leopard.
The problem is that if I have an external HD connected to one of the other Firewire 800 ports on the computer and powered on at the same time, the connection to the Presonus Firewire device is not recognized by the Mac Pro. Not only that, performance of the Mac Pro is affected adversely and System Profiler is unable to list any Firewire devices. If I turn the external HD off, the Presonus device is recognized and listed in System Profiler and the machine runs fine. I'm able to connect two external hard drives via separate Firewire 800 ports on the Mac Pro and both drives mount w/ no problem. It's only when I try to connect one of the external HDs and the Presonus audio device at the same time that the problem occurs.
I used this same arrangement on a PowerMac G5 running Tiger w/ no problems whatsoever. If the 400 to 800 cable is bad, I would think it wouldn't work at all, but it does when only the Presonus Firepod is connected and powered on. Any ideas?

Have done more research and apparently this is not an uncommon problem: overloading the Firewire bus when connecting an audio device along with an additional device like an external hard drive. As I understand it now, audio signal is a bandwidth hog and the solution is to get a Firewire PCIe card which will have its own independent Firewire bus and which I'll use exclusively for my audio device.

How can I connect to Oracle and SQL server at the same time?

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]

I have been trying to find a way to connect to Oracle Database through the developer 2000 and SQL server at the same time. I need to return some data from Oracle Database and some from the Sql Server Database. And update both through SQL. I find there is such a thing as the Oracle Transparent Gateway for SQL server. I can't find it on any of my CD's or through OTN downloadable files. If anyone can point me where to get this. Or tell of another way this can be accomplished I would appreciate it. TIA.
[email protected]
As far as I know you have 3 options depending on your specifications. I don't think option #3 will work if you need to actually join a
SQL Server table to an Oracle table.
1. Oracle Transparent Gateway. I haven't used the Oracle Transparent Gateway but my understanding is that Oracle gateways are
separate purchased products from Oracle. I've never seen any free/development versions of it anywhere. You'll need to contact
your Oracle sales rep about it.
2. Heterogeneous Connectivity. There's something called Heterogeneous Connectivity that could work for you - depends on what
version of Oracle you're on and what OS. You basically set up an ODBC data source on the Oracle server and modify the listener.ora
and tnsnames.ora files. You can then create a database link to SQL Server just like you would to any other Oracle database. You can
check your Oracle documentation for how this works. There's also some very good documents on Metalink that tell you how to do this
as well as a Heterogeneous Connectivity forum on this site.
3. Use the exec_sql package available in Developer 2000. This allows you to open and execute cursors to remote databases within
Developer. We have an account validation process that uses this - when a person enters an account number in a form while logged
into Oracle it validates the account is valid in our main accounting DB2 database. We also pull HR information from DB2 into Oracle
this way. If you're using Forms 6i exec_sql is a built-in command, in Forms 5.0 and 5.5 you have to add it as an attached library to
the form. I think you also need the OCA options installed from the Developer software to have access to the library in Forms 5.0 and
5.5. The library will be in the $ORACLE_HOME\oca20\plsqllib directory for these versions. The Developer documentation should have
additional information.
HTH

Unable to activate internal and external urls at the same time

Hi,
We have Configured EBS R12 in DMZ setup as described in Figure F-9 of metalink note 380490.1 ,Option 2.4: Using Reverse Proxy with no External Web Tier.
refering to 726953.1 Case History: Implementing a Reverse Proxy Alone in the DMZ Configuration - R12.
but Not able to activate internal and external urls at the same time in this configuration. Only the node where last autoconfig was run getting activated as web node.
When trying to accees the url of the other node it gets redirected to the url (where autoconfig is last run).and for this error observed is Error Code:502 Proxy Error.The specified Secure Sockets Layer (SSL) port is not allowed.(12204).
For both external and internal services are UP.opmn status is live no error.
Using Apache as reverse proxy.
EXTERNAL Reverse proxy settings:
s_login_page http://LONWEB01.process.com:81/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">NO</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">NO</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">NO</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
INTERNAL Middle Tier settings:
s_login_page http://stprojapp01.test.com:8005/OA_HTML/AppsLogin
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>
Are we missing anything....
Thanks & Regards

Hi,
Finally it's resolved...Following is the solution thought to share in the forum:
The configuration of the E-Business Suite environment for DMZ requires profile options hierarchy type to be set
to SERVRESP.
To change the profile options hierarchy type values to SERVRESP, execute the following SQL script as
shown below:
sqlplus / @/patch/115/sql/txkChangeProfH.sql SERVRESP
After successfully completing the above sql script, run Autoconfig in all nodes to complete the profile options configuration.
It's resolved after doing this..

Delete BOTH an event and To Do at the same time?

Similar Messages

Maybe you are looking for