Delete BP problem - CRM_ORDER_MISC106

Hi
while deleting BPs through bupa_pre_da I get an error CRM_ORDER_MISC106 "At least one entry could not be found in object buffer".
I deleted earlier all documents on system, but now I can not delete some of BPs.
Can you suggest anything?
Regards
Radek

Hi Gerhard,
we checked ibase, and we don't have it in system.
they are not used.
any ideas? this is strange that the message is connected to orders (crm_order....).
Regards
Radek

Similar Messages

How to delete the problem-solution in Solution Database

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Dear Sir,
I need to delete the problem-solution in Solution Database which is already created in CRM ( IS01). However, I don't know how to delete.
Please advise.
Thank you and best regards,

Deleted records problem w/ 2LIS_02_ITM

hi,
i had always thought that the queued delta method would record changes in sequence of their entry in the system. i discovered that it might not be the case, as in the problem i have below:
i have a PO ODS wherein i don't like to retain entries that have been deleted. my approach was to manage the correction via the recordmode/rocancel fields. however, i just found out that it doesn't hold true for all PO document types - in my scenario, i have a sequence of entries like so:
1- create po
2- flag po item as delivery completed
3- delete po
but, when i load it into BW it comes in as:
1- create po
3- delete po
2- flag as delivery completed
what happens now is that my ODS retains the last entry, since it comes in after the deletion. how do i work around this scenario?
btw, i don't have the deletion indicator in my extractor anymore - took it out as i wanted to rely on the queued delta management for the end result i wanted to achieve.
hoping for some quick responses! =)
ryan.

hi! many thanks for the quick reply...
i didn't tamper with the way the extractor is giving me the records in any way - they are stored there as they are given to me. so for the most part it's standard, except for the fact that i already took fields out of the standard extractor (retained only what i thought i'd need). i also checked the note you mentioned, and unfortunately, we're way beyond that patch level already...
of course the end-all i'm thinking of to solve my problem is to just include the deletion flag, and after everything is loaded and activated, postprocess the ODS to remove all entries that have a non-empty deletion flag.
hoping for more answers from everyone around, before i give up and just serve my head in a platter for my superiors to mangle (what with the requests and all)... :-O
ryan.

StarOffice 8 calc - select/delete range problem

I use calc for long time till now works fine.
Lately I encountered a problem when I want to select a range that I defined before, I'm using Data->Select Range.
but no range name appears at the list for selection.
I defined few ranges, but none appears.
The defined ranges show when I use Data->Consolidate but then it is not what I need to do.
The problem repeats when I want to delete a range (I couldn't find a way to edit it) using Data->Define range.
Is there a fix for that problem?
I'm using version 8 (update 9) on a windows Xp Home
Thanks for your kind help,

You can specify dynamic WHERE clause in the DELETE statement. Check this SAP online documentation for the same: [http://help.sap.com/abapdocu_70/en/ABAPDELETE_ITAB_LINES.htm#!ABAP_ADDITION_4@4@].
Try this:
DATA: V_COND TYPE STRING.
V_COND = 'FIELD NOT IN LR_RANGE'.
DELETE <FS_C> WHERE ( V_COND ).

Correlations in Workflow - wait for Delete event problem

Hi All,
I am working on version ECC5.
I have a workflow that needs to wait for any changes to i0008, i0007, i0509 and i2001 for the person who is the subject of the workflow. I have used correlations to do this and it is all working fine except for the Delete event.
For each infotype I wait for each event ie. Approved, Changed, Created, ApprovedCancelled and Delete. When the events are published the wait event is triggered and the workflow goes to the next steps where it does a recalculation, fires off a new workflow and ends the current one. This is working for all of the events except Delete. The Delete event is set up exactly the same as the rest, but somehow the workflow wait event is not triggered. It is happening with the Delete event for all the Infotypes I am waiting for.
Does anybody have any suggestions as to what may be the problem.
Thanks
Sandra

Arghadip/Martin thanks for your replies.
Yes, the delete event is being published. I am using the same object e.g BasicPay for the delete event that I am using for the other events - Approved, Created etc. that are working. The correlation and the wait for event steps are set up exactly the same way as they are for the events that are working. I find it curious that the delete event doesn't work for any of the infotypes. Why? Could it be that when a record is deleted the object no longer exists?
Any suggestions?
Thanks
Sandra

Retaining deleted messages - problem with preference settings (?)

I have set up my Mailbox Behaviours to
1) automatically "move deleted message to the Trash mailbox" (this option is selected)
and
2) Store deleted messages on the server (IMAP)
and
3) Permenantly erase deleted messages when "One month old"
BUT... for some reason Mail keeps deleting my messages after approx on week. I have tried changing the settings various ways, but can't seem to overcome this problem. There do not appear
to be any restrictions or rules on my IMAP server side that would be over-riding the MAIL prefs.
ANYONE have a suggestion or know what my problem is?

I believe it’s the server, not Mail, who is permanently deleting those messages. Try turning OFF Store deleted messages on the server, so that deleted messages are stored locally instead, or create a new mailbox on the server and do Mailbox > Use This Mailbox For > Trash on it. Manually move messages to the mailbox that was previously being used to store deleted messages on the server (which should appear now with a generic folder icon in the mailbox list) and see whether the messages are still being deleted from there after one week like before, even though as far as Mail goes it’s now a mailbox like any other.

FK DELETE RULE problem when importing 8i SCHEMA on 10g

Hi everyone,
I´m having the following problem:
When importing a SCHEMA dump from an 8i database to a 10g one, some foreign key´s delete rule are changed from 'no action' to 'set null' automatically, even though the whole SCHEMA was imported.
Has anyone ever had the same problem?
Thanks a lot,
Bruno

I did some more research and I think I was completely misunderstanding Oracle's implementation of delete rules. Now I believe that Oracle implements the "RESTRICT" option in SQL Developer Data Modeler as "No Action", which is the default option, hence why no DDL option is generated. However, it would still be nice if Data Modeler could detect this fact when comparing two models. What I mean it, if comparing an Oracle DB to a model, treat Restrict and No Action as the same, and thus don't attempt to re-generate the DDL for this "difference". For now, I'll just change the action on my models to No Action, and this should resolve the issue.

IMAP client, delete mail problems

Hello all,
I am on GW2012 and for a while now I have been having this problem.
Anyone, whether using Apple, Android or any other device/client, that connects to the 2012 GWIA to check mail, if they delete a piece of mail, it is simply striked through and not deleted. It will look deleted on the IMAP client/device, but when one looks at the full client or web client, the email that should have been deleted only has a strike all the way through it. It never deleted until it gets deleted in the full or web client.
Is there a setting somewhere in GroupWise that is causing this to happen?
Tom

cafetom,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Can't delete/stop problem execution??

All, I have a job (RMANScript) to backup my database that is being reported as a "Problem" execution. When I click to view the details, it shows the Initialize piece worked, but the actual script running for 5 days now. I've tried to suspend the run and I get a success on the suspend, but it still shows a status of 'Running'. How can I get this ONE execution (recurring job) deleted from the repository without having to delete/recreate the whole job?

REFERENCE: METALINK DOCUMENT ID :285513.1
FOLLOWING Job 'OEMR2_GRID_REPOSITORY_BACKUP ' IS running FROM LAST 24 hours AND you can STOP/DELETE it
ARLE4_STANDBY_HERC_KWAK_ARCHIVELOG_CLEAR 1 Scheduled 16-DEC-2006 10:00:05 EACH target's timezone 3 Database Instance SYSMAN RMAN Script
ARLE4_STANDBY_HERC_KWAK_ARCHIVELOG_CLEAR 2 Scheduled 16-DEC-2006 10:00:03 EACH target's timezone 3 Database Instance SYSMAN RMAN Script
ARKLE3_HERC9_KWAK9_HERC8 BACKUP 2 Scheduled 16-DEC-2006 10:00:03 EACH target's timezone 3 Database Instance SYSMAN RMAN Script
ARKLE3_HERC9_KWAK9_HERC8 BACKUP 1 Running 14-DEC-2006 10:00:00 EACH target's timezone 3 Database Instance SYSMAN RMAN Script
OEMR2_GRID_REPOSITORY_BACKUP 1 Running 13-DEC-2006 23:00:00 EACH target's timezone oemr2 Database Instance SYSMAN RMAN Script
OEMR2_STANDBY_ARCHIVELOG_CLEAR 1 Running 13-DEC-2006 15:30:00 EACH target's timezone oemr2sb Database Instance SYSMAN RMAN Script
TO Solve this problem OMS-JOB ID BY either OF THE FOLLOWING sqls (logged IN AS sysman)
SELECT execution_id
FROM MGMT_JOB_EXEC_SUMMARY js
WHERE status IN (12,13)
AND execution_id IN
(SELECT execution_id
FROM MGMT_JOB_EXT_TARGETS jt, MGMT_TARGETS t
WHERE js.job_id = jt.job_id
AND jt.target_guid = t.target_guid
AND UPPER(t.target_name) = 'OEMR2')
Output= 246B54AB1C262CB6E0440003BA9B2D4D
SELECT execution_id
FROM MGMT_JOB_EXEC_SUMMARY js
WHERE status IN (12,13)
AND job_id IN
(SELECT job_id
FROM MGMT_JOB j
WHERE j.job_name = 'OEMR2_GRID_REPOSITORY_BACKUP')
Output= 246B54AB1C262CB6E0440003BA9B2D4D
DECLARE
CURSOR c1 IS
SELECT step_id
FROM MGMT_JOB_EXECUTION
WHERE execution_id = '246B54AB1C262CB6E0440003BA9B2D4D';
BEGIN
FOR r1 IN c1 LOOP
Mgmt_Job_Engine.update_step_status(r1.step_id,5,0);
END LOOP;
END;
COMMIT
Job IS stopped AND moved TO job history

"Delete obsolete" problem

Dear Friend,
In our production server , we use IBM - Tivoli Storage Manager - Software for our RMAN backup purpose . The backup data backup piece are stored on a Storage Library . It works fine but the problem is when I am going to delete "obsolete backup" then it shows the following error :
RMAN> Delete pbsolete;
Backup Set 870 06-OCT-08
Backup Piece 870 06-OCT-08 c-1077970889-20081006-00
Backup Set 871 07-OCT-08
Backup Piece 871 07-OCT-08 rfjsj6d8_1_1
Backup Set 872 07-OCT-08
Backup Piece 872 07-OCT-08 rgjsj6n1_1_1
Backup Set 873 07-OCT-08
Backup Piece 873 07-OCT-08 c-1077970889-20081007-00
Backup Set 875 08-OCT-08
Backup Piece 875 08-OCT-08 rjjslh0e_1_1
Backup Set 876 08-OCT-08
Backup Piece 876 08-OCT-08 c-1077970889-20081008-00
Backup Set 878 11-OCT-08
Backup Piece 878 11-OCT-08 rmjsstps_1_1
Backup Set 879 11-OCT-08
Backup Piece 879 11-OCT-08 c-1077970889-20081011-00
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/14/2008 19:14:20
RMAN-06091: no channel allocated for maintenance (of an appropriate type)
Anybody has idea about the above error ?
Plz inform .. ..

Hi,
Always you need to check the Issue of RMAN from last
Check link
Re: RMAN clean-up
Channel allocation is required..
- Pavan Kumar N

ADF row header and delete all problem

Hi,
I am using JDeveloper 11.1.14 and ADF-Bc in my project.
In one of my page I display a simple table and a button which deletes the selected records.
I dragged and dropped the 'Delete' operation from the Data Control view object onto the bindings.
The below method iterates through selected rows and calls the 'Delete' operation which removes the current row.
The Code for delete is as below
public void deleteSelectedRows(ActionEvent actionEvent) {
RowKeySet selectedRows = richTable.getSelectedRowKeys();
Iterator selRowIter = selectedRows.iterator();
RowSetIterator empRSIter = voIter.getRowSetIterator();
while (selRowIter.hasNext()) {
Key key = (Key)((List)selRowIter.next()).get(0);
Row currentRow = empRSIter.getRow(key);
if (currentRow != null) {
voIter.getViewObject().setCurrentRow(currentRow);
OperationBinding operation =
getBindingContainer().getOperationBinding("Delete");
if (operation != null) {
operation.execute();
I have added row header as column in my jsp page inside af:table. ex: <af:column rowHeader="true" width="12" id="c16"/>
The problem is that if I manually select all rows[using control key] and click on 'Delete' button, the method is working fine[all records are being deleted].
But If select all records either thorugh ctrl+A or on click of top of row header, all records are being selected in U.i,but the delete operation is not deleting
all the records.It deletes only part of the records.[Ex: say 7 out of 10 records being displayed].
Please let me know where I am doing wrong. or if it has something to do with range size.
Regards,
Praveen
Note: I have multi selection enabled on the table

Hi Frank,
I have few more observations to add.
In the below code, if the row removal is commented out, then the selected row count(i.e size ex: 9)
and the index counter printed are correct.[i.e for example index counter printed will be 1,2,3,4,5,6,7,8,9]
RowKeySet rowKeySet = (RowKeySet)richTable.getSelectedRowKeys();
System.out.println("\nSIZZE"+rowKeySet.size());
CollectionModel cm = (CollectionModel)richTable.getValue();
int index = 1;
for (Object facesTreeRowKey : rowKeySet)
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)cm.getRowData();
System.out.println("index"+index);
index++;
// rowData.getRow().remove();
But when row removal is present then the index counter displayed is also wrong.. [ex: 1,2,3,4,5,6]
Same behavior is observed with 'Delete' operation also.
Regards,
Praveen

Add/Delete Rows problem

I'm having a problem with the add row and delete row for my table. I have a table set up with the add row button in the header, and the delete row button in the first cell of the row beneath the header. I have it set so that the initial count of the row is 2. My problem is if the user adds several rows with data, and save the form. When that user goes back into the same form later, it keeps the several rows that the user entered, which is fine, but then it automatically adds 3 more blank rows to the table, which I don't want. I don't understand why it is doing this. Does anyone have a clue to why this is happening?
Thanks
Connie

Hi Connie,
Just make sure that you have checked the below thing.\
File > Form Properties > Run tIme > Scripting > Automatically is checked.
Thanks,
Bibhu.

How do I delete a problem email?

I have isolated an email that is causing my email system problems. It cannot delete it. Every time I do, it disappears and appears back, and to make things worse recreates it many times, and mulitple copies appear in the mail box. How to stop this?

I actually used this solution :
First, you need to show folders and files which are normally invisible. To do this, open Terminal in Utilities and copy/paste
defaults write com.apple.finder AppleShowAllFiles -bool true
Hit return, then copy/paste
killall Finder
and hit return again.
Next hit Cmd-Shift-G and enter ~/Library/Mail and hit return
Open the triangle next to Mail and look for a file named
.OfflineCache file
and move it to the Trash. If this file exists, doing this will probably fix the problem.
You will need to reverse the show hidden command by just adding false to it, instead of true and them killall Finder again.

JTable & AbstractTableModel(Delete row problem)

Hi!!
I have used AbstractTableModel in my JTable.In case of multiple rows, i want to delete rows from interface as well as from database. As removeRow method is absent in AbstractTableModel.so DefaultTableModel has been used by casting but CastClassException throws. Here is Partial code(tried in many ways).Plz help me to solve the problem.
void jButtonCancel_actionPerformed(ActionEvent e) {
try{
jTable1.setModel(myModel); //jtable is object of JTable and myModel is of Abstract TableModel
DefaultTableModel model=((DefaultTableModel)jTable1.getModel());
int row=jTable1.getSelectedRow();
if(row>=0){
model.removeRow();
jTable1.revalidate();
model.fireTableDataChanged();
System.out.println("Rows Delete");
catch(Exception sq){
sq.printStackTrace();
sq.getMessage();

Hmm...
A bit of studying java awaits you.
Anyway.
Your class:
public class MyModel extends AbstractTableModel
// Do various sorts of coding here
}Is not an instance of DefaultTableModel, so, if you try to cast your model to a DefaultTableModel it will throw an exception since the conversion is impossible.
Recomended solution:
Add a remove method for your class MyModel that does the following:
public void removeRow(int row)
// data removed
// fire removed data event
}Then instead of casting to DefaultTableModel, cast it to 'MyModel' and call the method 'removeRow'.
When it comes to inheritance and casting you can always cast an object to any of it's superclasses or any of the interfaces it supplies or it's superclasses suppplies. You can not cast an object to a instance of which it has no relation with.
In you example, your table model class extends the abstract table model but it does not extend the DefaultTableModel. An instance of your class can be casted to AbstractTableModel and so can an DefaultTableModel because they are both subclasses from AbstractTableModel. They can also be casted to TableModel since all of these implement the interface needed to fullfill TableModel's specification.
If you cast a DefaultTableModel instance to TableModel you can not try to cast it upwards to something the instance wasn't from the beginning.
Example:
DefaultTableModel dtm = new DefaultTableModel();
// When you do casting uppwards, there is no need for paranthesis
TableModel tm = dtm;
// You can easily later on cast this back to what is what or to any step
// in between
DefaultTableModel stillSameModel = (DefaultTableModel)tm;
// You can not however cast to something the instance never was
// Row below will cause an compile error:
JComboBox jb = (JComboBox)dtm;
// This since JComboBox can never be an superclass to the DefaultModel
// More dangerous errors that can't be catched until runtime is the
// one you made. Ie: I do what could be an valid cast
MyModel mm = (MyModel)tm;
// Since MyModel is an TableModel and tm refers to an TableModel,
// this casting is approved by the compiler.
// It will on the other hand throw an ClassCastException when run since
// the variable tm contains an instance of DefaultTableModel which
// is not an MyModel instance.Recomended that you read up on inheritance and basic OO.
Regards,
Peter Norell

Delete key problem

Hi All,
I am new to MacBook, I recently bought a 15" MacBook Pro. Lately, my girlfriend found that if press delete for more than 3 seconds then release it. The shutdown menu pops up, it is annoying since we use delete key frequently to delete the texts. We tried to look for keybinding at keyboard settings. There is no such option. I know that for the shutdown menu, you need to press Control+Eject, not delete. Is my MacBook Pro faulty? Thanks.
Jacky

Yes, it sounds like you have a hardware problem.

Delete BP problem - CRM_ORDER_MISC106

Similar Messages

Maybe you are looking for