Delete broken database?

Hi i have a test bbox which has become a bit "broken" and wont mount. I'm not really bithered about it, but need to delete it, but dbca wont allow it because its not mounted, is it possible any other way?? I am on RHEL3, ora 10.2.0.1
regards
Mark

i did try that but dbca kept throwing errors about the db not being mounted....
anyway, I have ditched all db ctl redo files and edited oratab and tnsnames and listener files, now dbca dosnt know about it.....
thanks

Similar Messages

Delete a database in Essbase application

I am getting the error as" Object locked by a user' when I try to delete a database in essbase application. Please advice how to delete it.

Hello,
You're in the wrong forum. This is the BDB JE forum. The Essbase forum is here:
Essbase
Please post your question there.
--mark

"Delete on Database" in /SAPAPO/SDORDER_DEL

Dear All,
Can somebody help explain what happens when we execute "Delete on Database" in /SAPAPO/SDORDER_DEL? and how would the program acts for each selection parameters, if;
- we have not put anything in the selective deletion portion of the screen for "Location", "Product", and "Last Changed Before" fields, don't tick the check box for "Without check" option; but tick the check boxes for "Adjust ATP tables with /SAPAPO/POSMAPN table" and "Delete Obsolete Records in the /SAPAPO/POSMAPN table" in the additional function, what will happen? Will it delete anything? Or will it only do as what the additional function says?
- how about in the product allocation data portion, considering that we have specified a location, what is being deleted when the check box for "Delete Product Allocations" is ticked? and what is being done if the check box for "Check Product Allocation Assignment" is ticked?
Thanks in advance for any response.
Regards,
Philip

Dear Philip,
Find below few points about this transaction.
1. check is normally carried out before an order is deleted to see if this order still exists in liveCache. If this is the case, the order is not deleted.
2. You can also print out a list of the orders that cannot be deleted if you have set the relevant indicator.
3. In exceptional cases, you can deactivate this check and nevertheless still delete the selected orders.
4. If you have set the Delete all orders indicator, the order data from the database is completely deleted without any check. You should take great care when using this function.
5. A location product or a location can only be deleted if SD sales documents for this location product no longer exist in the database (that is, if, for example, no more entries exist in the tables /SAPAPO/ORDADM_I or /SAPAPO/ORDPART).
Regards,
Siva.

How to delete a database record by using EJB entity beans

Hi, All,
Does anyone know how to use entity bean to delete a database record? I have all the EJB entity beans created, including access beans to each. I can successfully create records, find and update records, however, I haven't find a way to delete records yet.
Your response is appreciated.
Cathy

Please see EJB Forums for continue discussion on this subject.
Reference titile: "how to delete database record by using CMP entity beans "

ADF delete from database.

Hi,
I am trying to design a page which will delete a particular row from one or more database tables. The jdeveloper version is 11.5 and the database is oracle 10.2 version.
How can I do it?
Thanks

Hi all, Thanks for the reply..
Actually I am trying to delete one record at a time, from the same table, from which m populating it on the jspx..
That means the list source and the base source are same..which is not possible..
What can be the solution for it ??
I tried to create a separate view object for population on jspx and kept it in list source.. And I am using different view object in base source.. Both view objects refer to the same table..
But it is not working out..the problems are..
The record is getting deleted only for the first time when i run it.. Even after getting deleted from database, the record shows up in the list..
And when i do the same operation one more time in the same session, 1st record in the table is getting updated with the value which i tried to delete..
And I am not using managed bean..
regards

DELETE FROM DATABASE + restored again?

there is a statement
DELETE FROM DATABASE <dbtab> (<ar>) [CLIENT <cli>]
ID <key> .
Suppose I have mistakenly deleted from the database
can it be

Hi,
there is a syntax like DELETE FROM DATABASE as you mentioned.
But never ever use that to delete a record in DATABASE TABLE as you cannot recover that data.
hope this helps.

Delete a database from a server in Business Process Architect

Hi Friends,
Does anybody know how to delete a database from a server in Business Process Architect? I don't see any option to perform delete. I am using version 10.1.3.4.
Thanks
Tridib

Thanks for reply
Actually i want to delete the jobs from the Url below
http://xyz:7778/reports/rwservlet/showjobs?server=testreport which gives all the jobs when u click on anyone job it open the pdf file which is stored in cache i want this job to be deleted including the file.
I think there is a target.xml file which show the job in IAS OEM for a report server if the report server is added in target.xml from oem we can delete the jobid and file.
where should i go to see the report server in oem?
Regards

How to delete a Database view?

HI Everyone,
Created a Database in ECC to get the bank details from two tables BNKA and BKPF,
but now I wanted to delete this View. Can someone tell me how to delete the Database view?
Thanks
Vandana

Goto SE11 > select radio button for view > type view name > press delete icon in top menu (where you have icons for activate, check etc).
Regards,
Gaurav

Manually delete a database

Hi everybody,
on this forum i cannot find a procedure to manually delete a DB.
I've got 2 database installed on a Linux server and i'd like to get rid of one..
What can I do to completely delete a database?
I haven't got any utilities (like dbca)..
Hope somebody can help me, thanks in advance!

You have not said why you need to manually delete it. Also you did not state your Oracle release.
You can use DROP DATABASE command. This will drop the database, deletes all control files and all datafiles. If you are using spfile, it will delete it. Archivelogs and Backups are not deleted with this command, but you can then use RMAN or your Operating System command to delete all archivelogs and backups where required.
e.g
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> DROP DATABASE;

Enabling "Delete a Database" option in DBCA

Hi,
I want to delete my database using DBCA, i know i can directly drop the database , since i have tried all options to enable the option of
"+Delete a Database+" but guess need right process...i have also tried by stopping all oracle services ..but still the option is DISABLED
need experts experience..why this is happening and how i can overcome by this...
I am uisng oracle 10g, OS: Windows...
thanks
SG

I uninstalled Oracle 10g completly and then installed again, adding the database seprately using DBCA and checking DBCA again, the delete the database was activated.
Resolved the problem same day..thought would close the unanswered Q.
Thanks..

Delete a database option is not available in DBCA

Hello,
I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
The databases are up and running.
I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
What is the problem? What should I do to get option to delte both databases from DBCA?
Regards,
Lovro

pavli wrote:
Hello,
I have HP-UX 11v3. I have installed Oracle Standard Edition 10.2.0.1 and after that I installed 10.2.0.4 Patch Set.
I configured two databases using DBCA. At the end I save scripts (not create database) and run script from shell.
The databases are up and running.
I tried to delete one database through DBCA, but option Delete a database (and also "Configure Databse Option") is not available, they are grey.
What is the problem? What should I do to get option to delte both databases from DBCA?
Regards,
LovroDBCA reads the ORATAB file on Unix to determine what databases exist to be dropped (and DBUA does the same to determine which databases are to be upgraded). Most likely the ORATAB file does not contain an uncommented entry for your database.
Niall Litchfield
http://www.orawin.info/

How to Delete a Database on ASM

I am trying to delete a database which seems to be on ASM but I get the errors below. I have limited exposure on ASM so not sure how to proceed. Can someone help?
$ dbca -silent -deleteDatabase -responseFile dbca_response.rsp
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/orcl/spfileorcl.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/orcl/spfileorcl.ora
ORA-15077: could not locate ASM instance serving a required diskgroup

hi,
this may be reason..
ORA-01565: error in identifying file 'string'
Cause: An error occurred while trying to identify a file.
Action: Check the error stack for detailed information.
issue (Metalink Note 390591.1). We encountered similar issue in Linux RAC cluster and has been resoled by following this note.
Cause
=====
Installing the 10.2.0.2 patchset in a RAC installation on any Unix platform does not correctly update the libknlopt.a file on all nodes. The local node where the installer is run does update libknlopt.a but remote nodes do not get the updated file. This can lead to dumps or internal errors on the remote nodes if Oracle is subsequently relinked.
Solution
========
There are two solutions for this problem:
1) Manual copy of the "libknlopt.a" library to the offending nodes :
- ensure all instances are shut down
- manually copy $ORACLE_HOME/rdbms/lib/libknlopt.a from the local node to all remote nodes
- relink Oracle on all nodes :
make -f ins_rdbms.mk ioracle
2) Install the patchset on every node using the "-local" option:
On Unix:
runInstaller -updateNodeList -local ORACLE_HOME=$ORACLE_HOME CLUSTER_NODES=node1,node2,...
On Windows:
setup.exe -updateNodeList -local ORACLE_HOME=%ORACLE_HOME% CLUSTER_NODES=node1,node2,...
ORA-10577: Can not invoke test recovery for managed standby database recovery
Cause: Test recovery option is used for managed standby database recovery.
Action: Either remove the test recovery option or invoke manual test standby database recovery
regards,
Deepak
Edited by: Deepak_DBA on Oct 13, 2009 12:51 PM
Edited by: Deepak_DBA on Oct 13, 2009 12:54 PM

Delete a database with a command and how exp from O10g to OXE

hi all much thanks for read the post, i followed:
NewB Question about, database, create/ delete/ show databases....
but i havent installed oracle10g (utility: DBCA) because in my new laptop with windowsvista, cant install, then i try install oracle XE on my WindowsVista Box, by moment all its ok, i try exp on Oracle10g Pc:
c:\exp UFIERROS/pass owner=UFIERROS file=FIERROS.DMP
exported!
then in pc with Oracle XE i try:
c:\imp userid=system file=FIERROSXY.DMP log=imp.log fromuser=UFIERROS touser=UFIERROS
the first time say errors (not captured), by error i type again:
c:\imp userid=system file=FIERROSXY.DMP log=imp.log fromuser=UFIERROS touser=UFIERROS
and now say:
importación realizada en el juego de caracteres WE8MSWIN1252 y el juego de caracteres NCHAR AL16UTF16
el servidor de importación utiliza el juego de caracteres AL32UTF8 (posible conversión de juego de caracteres)
. importando objetos de UFIERROS en UFIERROS
IMP-00015: la siguiente sentencia ha fallado porque el objeto ya existe:
"CREATE SEQUENCE "FIERROS_S" MINVALUE 1 MAXVALUE 999999999999999999999999999"
" INCREMENT BY 1 START WITH 110325 CACHE 20 NOORDER NOCYCLE"
IMP-00015: la siguiente sentencia ha fallado porque el objeto ya existe:
"CREATE SEQUENCE "PASE_MAESTRO_S" MINVALUE 1 MAXVALUE 9999999999999999999999"
so so same errors the file have mmm about 100 lines of warnings/errors
then the first question is:
1) if havent DBCA (or how access it), how erase my database, for try again imp..
2) How import my data from oracle10g to oracleXE?
thanks

i do:
C:\temp>sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Sßb Feb 24 03:10:26 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Conectado.
SQL> drop user UFIERROS;
drop user UFIERROS
ERROR en lÝnea 1:
ORA-01922: se debe especificar CASCADE para borrar UFIERROS
SQL> drop user UFIERROS CASCADE;
Usuario borrado.
SQL> create user UFIERROS identified by linuxx;
Usuario creado.
deleted and recreated, but, how use the data pump?
thanks

DELETE DATAFILE (database) FROM ASM not using dbca

Hi All
I have RAC(2 node) on Windows 2003 EE, Oracle 10g R2
How i can delete file from my asm instance?
For example, i create database manualy then i want delete this database? how i can delete file from asm? dbca dont see this instance.
a long time ago, i have also TEST db, i delete this db using dbca but in ASM (EM console) i still see this db, there are no file but i see "word" TEST how i can delete that?
thanks in advice

http://www.oracle.com/technology/products/database/asm/pdf/asm_10gr2_bestpractices%2009-07.pdf
page 26
SELECT concat('+'||gname, sys_connect_by_path(aname, '/')) full_alias_path FROM
(SELECT g.name gname, a.parent_index pindex, a.name aname,
a.reference_index rindex FROM v$asm_alias a, v$asm_diskgroup g
WHERE a.group_number = g.group_number)
START WITH (mod(pindex, power(2, 24))) = 0
CONNECT BY PRIOR rindex = pindex;
:)

Deleting broken wires crashes Labview 2010

Hi
I am down to earth after
enjoying all the nice features of LV 2010.
I randomly encounter
hour-glass hang-up when I try to delete broken wires. This is really
unpredictable as far as I have watched. I t happens if click on a broken with
the mouse or when I select a couple of those. It does not happen, if I use
ctrl-b.
When you try to delete it,
the hour glass comes up and the window is no longer refreshed.
I use the task-manger to
kill LV after
that a wild hard disk action starts, whoever initiates that ??
After LV-restart I usually
can recover a lot, but this make RAEL work almost impossible.
I a running an English LV
2010f2 on a German WinXP professional.
And Please, please patch
this as soon as possible.
Gabi
7.1 -- 2013
CLA

Hi Gabi,
I'm glad to hear that you are enjoying LabVIEW 2010! Can i ask what is the specifiation of the computer you are using it on?
This is because it might be that your computer doesn't have enough memory for this program.
Also there is a patch for LabVIEW 2010, in this link.
Hope this helps!
John McLaughlin
Insides Sales Engineer Team Leader
National Instruments UK & Ireland

Delete broken database?

Similar Messages

Maybe you are looking for