Delete button for some photos in the moments tab is disabled

Several of my photos after the ios8 update are unable to be deleted. I select them but the trash button is disabled. If I open them individually the trash button is not there in the bottom right. Please help. very annoying.

Those are usually photos that were synced to your device from your computer using iTunes. They can only be removed by syncing them off again. Either uncheck the entire folder (windows) or event (iPhoto on a Mac) that they belong to and sync again to remove all the photos from the folder/event. If you only want to delete some but not all of them, delete them from the folder/event on your computer and sync again and those photos will be removed.

Similar Messages

I want to delete some photos of the user pictures. Where can I find them?

I want to delete some photos of the user pictures. Where can I find them?
I mean those pictures, which come on when clicking on the user-picture, here "latest".

Unfortunately I don't speak German.
Go back to Recents (Letzte), select a picture, and then hit the delete key. Delete all that you want to. At this point the 'Done' button will be grayed out.
Click the Show All button at the top left.
Then go back to see if the user pictures were removed. It worked for me.

Hi, i have deleted accidentally some photos and the trash is empty. How can I recover them? Urgentlyyy

Hi, i have deleted accidentally some photos and the trash is empty. How can I recover them? Urgentlyyy

Which trash is empty? If it's the iPhoto trash, check the System Trash, as files deleted from iPhoto 11 go there. Assuming that's also empty then you have exactly two options:
1. Restore from your back up
or
2. Use a file recovery app such as File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

In Earthlink Webmail, the "check all" and "delete" button for deleting multiple messages no longer function (although they work in I explorer).

When using the webmail application for earthlink email, the "check all" option to select an entire page of messages at once no longer functions. Same problem with the "delete" buttons that are located at the top and bottom of the page with multiple messages. Consequently, the only way to delete a message is to open the message and delete it in that view -- extremely tedious if there are a lot of messages.
This is a recent change, in the last few days. Everything works fine in I explorer. Earthlink support suggested I start Firefox in safe mode and restore firefox default settings. I went through the process on the help page. It didn't help.
I'll provide the earthlink link, but it is my email page that is the problem.

Same here.
- select multiple mails with the SEARCH option (manually selecting seems to work fine)
- click the move button
- list of folders appears (witn account & cancel options that both still work)
- click on a folder
- mail flies to this folder (animated)
- list of folders remains visible
- the cancel button does NOT work
- the accounts button takes you back to the root "directory" of your accounts
- in my case "live" and "exchange"
- this screen is a dead end. Clicking on both the account names and the cancel button do not work
A complete restart fixes the problem

Of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

i use ipad mini with retina display 16gb i love playing clash of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

However, I originally had the kindle app on there and when he is reinstalling it comes up with my kindle account. How do we change this?
OPen teh Kindle app.
Tap the i at bottom right then Settings > Deregister this device.
-> http://www.amazon.com/gp/help/customer/display.html?nodeId=200375710&#managedevi ces
He does not have an actual kindle so I am not sure if he would be able to create one anyways.
The Kindle app is so you do not have to use a Kindle. Yes, he can have a Kindle account and not own an actual Kindle hardware device.

Please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

please i want to remove the old version of itune, the new version does not delete it for some reason , what i should do?

See https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
Since you have a Intel Mac, if you can upgrade to OSX 10.5.x then you may be able to use more current releases.
jscher2000, You should link to http://www.mozilla.org/en-US/firefox/all-older.html for 3.6.28 since the ftp is not mirrored.

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

HT1918 I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address?

I cannot access files I uploaded from an old computer. The email account to which some tracks are connected is deleted. For some reason my birth date doesn't work either. Is there some way to transfer the files to my current address and username?

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

How to hide/remove the 'Delete' button for a particular role

We have a role that can only Create and Edit the Accounts, Contacts, Opportunities, & Leads. So I modified the Default and Owner Access Profiles for that role and changed the Access Level to 'Read/Edit' for each of the above mentioned Record Types.
When the user is logged with this role they can see the 'Delete' button on all the Record Types. When they click on the 'Delete' button they get the 'Access Denied' message. Thats fine, but how do you hide/remove the 'Delete' button for this role so they don't try to click it.

At this time it is not possible to hide/remove the "Delete" button. This functionality is on the roadmap.

I copied some photos from the main album to a new album. And I need to delete these photos from the main album so as to have them only to the new album. When I select the photos and choose delete I get the answer DELETE EVERYWHERE

Ι copied some photos from the main album to a new album. And I need to delete these photos from the main album so as to have them only to the new album. When I select the photos and choose delete I get the answer DELETE EVERYWHERE. I don't have the choice to delete it only from the main album.

You mean you copied photos from your camera roll to a new album, correct? Well, that's the way it works. The photos wern't actually copied to your new album, just pointers to the actual photos, which are still in your camera roll. So, yes, if you delete from your camera roll, you remove them from your phone.

Can't Use Batch Rename "Rename In Same Folder" for some photos

Have a strange problem: when using "Batch Rename…" under the "Tools" menu, "Rename In Same Folder" is unusable for some photos taken with some cameras, not for others. For one example, I shift-selected a range of photos taken at a recent vacation, some with my iPhone, some with my girlfriend's Canon PowerShot SD450. Bridge renamed the iPhone photos, but not Canon photos. For another example, if I select a single photo taken by her cell phone or Canon camera, "Rename In Same Folder" is grayed-out; if I select a single photo taken my by iPhone, not so. Does anyone understand this behavior, and is there a solution?

Bridge Support Center in the help menu leads to a 404 error page.
Sadly enough this is also on my system (Mac OSX 10.6.8) It should not be showing 404 but it is there...
What Bridge help files and links, forums, communities, google searches do not do is tell you how to fix what happens with the problem
In general restarting Bridge holding down option key (in your case alt key) to choose reset preferences solves most problems.
Here is a page from Adobe Support about Troubleshooting (although this states you should combine option/alt with cmd/ctrl but that is not needed)
http://kb2.adobe.com/cps/317/317912.html
I want to use Bridge batch rename to change jpegs into Mac PC compatible jpegs.
Although I have the option for compatibility with Unix and Windows checked in my customized presets I'm not really aware of the need for that. If you have a .JPG or .jpg extension as the extension a Mac reeds and opens the file without problems. I am aware that as a Mac user I had the need to take care of Windows files in the past. Before OSX a Mac did not need an extension to recognize and open a file. Since OSX is Unix based the need to use an extension is there and also you should only use one dot (.) in the filename and that is before the extension at the end of the filename. Using spaces, commas etc is possible but not prefered. In basic, keep it simple (and short) and the file will open on all systems without problems.
When you select a preset, the rename and preview buttons grey out. So I start all over...clear cache, check file permissions, restart/shutdown, etc
That should not happen, presets and batch rename should be always available, even if you have only one file selected. You should start with the refreshing of the preferences. Deleting caches and checking file permissions are not needed every time for clearing prefs (although it is wise to maintain your system on a regular basis, but that is good for the use of all apps).
On a Mac the user defined Batch Rename settings are saved in the user library / application support / Adobe/ Bridge CS5 / Batch rename setting. (not a single clue how that translate to windows but I have no reason to believe that such a file should not be present on your system.)
Enter the term "batch rename" in the windows Bridge forum search and I got....ZERO results.
Well, again a disappointment, there will be many result available in both Windows and Mac forum but it sure is not easy to find them
The forum search option is next to useless. I believe you should try to switch to the main forum page or something, I once had a result but after so many tries I forgot how I managed this (combined with getting angrier every try...)
I could really use some help because there is no way I can convert the number of files I have to make them compatible in MACs
As stated before, if the are .jpg they are already compatible
it used to be in CS 3 and 4 but since I "upgraded" to Production Premium suite 5.5 none of the version work.
If you keep having problems you might consider the clean tool option to clear PSCS 3 and 4. Check also this KB article:
http://www.adobe.com/support/contact/cscleanertool.html
It should be possible to use all CS versions on your system but you can have only one version of Bridge active at the time. Upgrading from a single CS to a Suite should also be possible without problems but sadly enough everything that should be possible without problems is often only happening in the ideal world...

Disable 'Delete' button for posted invoices in GOS Attachment List

Hi,
when i open the attachement list of a generic object i see the attached files. In this dialog i want to disable the "Delete" ( attachment) button for Posted invoices ( In MIR4 tcode -> If the invoice is already posted it should not allow to delete the attachment )
I read oss notes and some ides of copying diverse classes but nothing really helps.
I found two badis
GOS_SRV_REQUEST
GOS_SRV_SELECT
but i dont know where we have to write our code .
I read so many posts related to attachments but all the places described about authoriztion object .
Can you please give some ideas to disable the delete button for posted invoices.

Hello,
For GOS there is no SAP Standard authorization concept. The only way to
manage GOS authorizations is implementing it via custom code as
described in SAP Note: 491271.
Please have a look at the SAP notes:
491271 Authorizations for generic object services
701609 Authorizations for services: Final classes
For the use of S_OC_ROLE: this object states if a user is an office
administrator he can create, modify or delete every document, even
those created by other users. If the user is not an office admin, the
user is still able to create his own attachments.
Regarding to the issue, there is an role object S_GUI for upload.
To match your inquiry, pleaes find the user's role and active the
object S_GUI.
Regards,
David

Turning off "Ken Burns" effect for SOME photos

I see that someone has asked a similar question in the past and told that it's not possible to turn off the Ken Burns effect for some photos, but I'm hoping someone has a workaround or there's a hack...
I've made a slideshow and got the idea to "tell the story" by creating some "title" images in Photoshop elements which I've placed in between a series of photos.
These are just black backgrounds with the title (e.g. "...and the party begins", "Family reunion" etc.) in big white letters. I'm very happy with that idea
I like the Ken Burns effect for the slideshow as it adds some semi-video "action" effect, but NOT on the titles. Having the Ken Burns effect there just looks stupid, so I would like to remove it for the titles alone.
I know I can do it the other way round (go to "Settings" for the Slideshow, deselect "Automatic Ken Burns effect", then manually add the effect for all the photos I want), but with a slideshow album that's going to take ages to do!!
Is there a better way?

Perhaps you're checking the KB button on the "main" menu for the slideshow. That actually changes only the setting for the image that is currently selected. Try using the "Settings" button and deselect the "Automatic KB effect."
John

I upgraded MacbookPro 2009 from 10.6.8 to Yosemite. Beforehand I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU. I also deleted half of my photos from the default library on my laptop, lets call it DE. I then in

I upgraded MacbookPro 2009 from 10.6.8 to Yosemite 2 weeks ago. My iphoto is now a nightmare. i went to our local apple retailer but they could not help either. Perhaps someone can help. Beforehand the OS upgrade I made a backup copy of my Iphoto library onto an external hard drive. Lets call it BU with 50GB. I also deleted half of my photos from the default library on my laptop, lets call it DE, now with about 20GB, to gain space. I then upgraded to Yosemite.
I have also installed since a long time Iphoto Library Manager 3.8.6. (this may be the cause of the problem as it was not upgraded and perhaps thus not compatible with iphoto 9.6 which I have now after the upgrade to Yosemite) It all worked fine before the upgrade, switching in iphoto between the two libraries DE and BU.
It also worked fine after the upgrade for a few days. At one stage Iphoto asked me to upgrade the iphoto version as it otherwise could not read the photos when I tried to load the BU library into iphoto. I did click yes to upgrade iphoto. As a result I became a brand new but totally empty library, no photos.
BU was still on the external disc, however the "Master" file was empty. We fortunately discovered all photos were in another file called Old Master, also under BU. We made another copy of the Old Master file onto the external disc. Lucky we did, because shortly afterwards we could not open anymore the BU file thus had no access to anything in there. Now I have 17000 photos in a file called Old Master on my external disc and another smaller library DE on my laptop. When I tried to import the photos from Old Master into a new iphoto library it was very messy. All events dates were mixed up, many photos were imported twice. I have no idea whether all my 17000 photos have been imported.
Can anyone suggest what is the most time efficient way? How do I best import my 17000 into a new library ensuring I don't loose any in the process. I do not wish sorting through 17000 photos for a week or so. Shall i also get a new iphoto library version now? Thank you for anything that may work.

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

Disable Delete Button for infotype 2001 subtype 0025

I want to Disable Delete Button for infotype 2001 subtype 0025 only in PA30/61.
Is there any EXIT available

Hi
Try it .
Somebody already given this type of answers.
Pls first use Search then post.
Well FYI,
<b>There is a standard User Exit for PA30 / 40 for PBO and PAI events.
ZXPADU01 for PBO and
ZXPADU02 for PAI events.
By writing proper code in here for the IT2001, you can write your rules.
PBAS0001 ( PA: Pers.Admin./Recruitment: Default values and checks ),</b>
Manoj Shakya.

Delete button for some photos in the moments tab is disabled

Similar Messages

Maybe you are looking for