Delete Button not active in Change PO

Hi All,
I looked at security and authorizations, and checked the PO status in both SRM and ECC. All seems to be ok. But not able to delete the PO line items. We are in SRM 5.0 ECS SP15.0. PO was changed, added lines and ordered and transferred to Backend as well. Now when I want to delete the PO line items, Delete button is inactive. Please advise.
Regards
Rao

Hi Rao,
Is this for all PO's?
Deletion is not possible
   i. for the POs which are in status 'ORDERED'
ii. active version of the PO for which follow-on document exists.....
As per the standard system behaviour, once the PO is already sent out
to the Vendor, the Delete button at Header will be disabled. And this
is the standard behavior. You can not delete the PO from the header
and the only option you can do is deleting the items from this PO.
Also, maybe try MANUALLY running update reports CLEAN_REQREQ_UP and BBP_GET_STATUS_2 which will ensure that SRM and the backend are uptodate and retest.
Hope this helps,
Kind Regards,
Matthew

Similar Messages

DELETE button not active in Invoice

Hi All,
We have ECC 6.0 and SRM 5.0 . After creating Invoice in SRM front, User keeps the Invoice in HELD or posts it with errors when it goes into "TO BE CORRECTED MANUALLY" status. Now when the user agains views it in display mode, only CHANGE button is active. DELETE is greyed out .This is the case only for invoices created by the same user. So, can you please throw some light on what can be the reason for this inconsistency as for some users the DELETE button works and some it does not.
Any help will be highly appreciated.
Regards,
Sheetal.

We had raised a call with SAP and SAP has replied back saying " This logic was implemented for technical reasons, to avoid, that the invoice data is still in the buffer and modifications to the document which could lead to inconsistencies. This logic was implemented by note 728714, and should prevent above mentioned situation.
This issue is resolved now.
Regards,
Sheetal.

Change Button Not Active even after Delivery Completion Indicator is Remove

Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,

Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. Help!

Trying to delete pages 21-24 on iPhoto book but "remove pages" option grayed out and pressing delete button not doing anything. These extra pages resulted from using Autoflow and now we can't seem to get rid of them. Help!

Good morning Old Toad.
I did as you suggested:
1) Booted from install CD.
2) Ran Disk Utilities on internal hard drive--no repairs necessary. For good measure, did the same thing on external drive. Also no repairs necessary.
3) Checked software update--no updates found. About this Mac said I was already running 10.4.7. For good measure, I downloaded the latest and installed it. Since it let me run the install, I'm not sure if I installed something new or reinstalled what I already had.
4) I rebooted from CD, ran disk utilities, ran repair disk--no repairs necessary. Repaired permissions and a lot of permissions repaired.
5) Tried to delete the files and the same old thing happened: kernel panic. The specific message:
panic(cpu 0 caller 0x00102A08): jnl: transaction too big (1587712 >= 1572352 bytes, bufsize 8192, tr 0x29f1fb0 bp 0x2801de40)
So there's no change in my status.
I'm trying to delete the files because:
A) They already take .5 Gb.
B) I can't get rid of them ever. If I move the problem files to a different folder, I can only do one successful drag-and-drop backup to the external drive until the "new" thumb segments become unerasable just like the previous versions and crash the system.
C) I can't even "just" drag and drop every file/folder except the thumbs, because that ends up crashing the system as well. So I have to drag and drop every file/folder in the iPhoto hierarchy individually. Which makes me less inclined to backup, which defeats the purpose of a backup.
D) After the iPhoto fiasco I'm just crabby about all the Apple screw-ups I'm experiencing and I want to get them fixed.
Thanks for your help. Any additional suggestions would be appreciated.
G4 Mac OS X (10.4.6)

Modification Buttons not active in Integration Repository

Hello,
we have a strange behaviour in Integration Repository. With java 1.3 on frontend all looks fine but with 1.6 modification buttons (text-preview...) for message-mapping objects (tab Design) are not active.
Does anybody know this issue? What can we do to sail round this problem?
Thanks
Andreas

Hi Andreas,
I faced the same issue some times back, when I upgraded java from 1.4 to 1.6 version.
So I had to disable all the java version later than java 1.4.2.
Try this steps :-
1. go to Control Panel - Java.
2. In Java control panel , go to General tab.
   In temprory internet files click View. Here delete all the entries related to Your XI link.
3. In Java control panel, go to Java tab.
   In java Applet Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
   In java Application Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
Regards,
Sunil Chandra

Delete Button not appearing in cFolders

Hi All,
The user is allowed to upload the document in the cFolders. In the screen where the list of files uploaded is displayed, there are buttons like 'Create', 'Copy' etc. But here there is no option to delete the uploaded file.
Can any one suggest why the 'Delete' Button is not appearing.....
Thanks in Advance.
Regards,
Mary

Hi ,
Are you using custom roles?
Authorization to delete is missing.
Two ways you could get that :
1) authorization object CFX_OBJ should have activity 'delete' (06) in your profile
or else authorization object ACO_SUPER with activity 'Admin' ( not recommended)
2) Enable delete authorization via BBP_CFOLDER_BADI method col_authority_change
regards
Alok

Cells button not active in query

Hi,
This system has just been upgraded to BI7.0 SP17. None of the queries I have created give me the option to change the Cells - the button is not active.
How do I make it active?
Thanks
Suzanne

Did some more research and found out that I need to have 2 structures in the query for the cells to be active

Save button not activated in AD HOC query

Dear All,
I have this problem where my Save button is not Activated in Adhoc query, since it appears deactivated i am also not able to see any dump with which i can work.
I am and SAP HR consultant aanusing ECC 6.0,
Please help in the same.
Regards

I Hi
Type su53 and found the missing authoraisation and fwd the same to ur basis team
if u use pqah for adhoc query it not have save option ,Hope u r using the
S_PH0_48000510
if not use this it will have save option
with regards
partha

Delete button not available for goods receipt when PO has GR-Based IV set

Hi ll,
the delete button for confirmations is greyed out when the PO has the GR-Based IV set, the return delivery button however is available.
There are several goods receipt on the PO some of which have linked invoices but the goods receipt I want to cancel is not linked to an invoice.
I've checked the backend config and it's the same for movement types 102 and 122. Also I can manually post a 102 in the backend.
For PO's without GR-Based IV both the delete and return delivery buttons are available.
Does anyone have any ideas? We are on SRM 4.0.
Cheers
Chris

Hi,
thanks for the response but I don't think this situation is related to backend settings as I can perform a 102 and a 122 against the same PO l;ine directly in R/3.
This appears to be an SRM "feature".
To claifry the situation
PO flagged as GR-Based IV
Purchase Order line has several goods receipts and several invoice receipts matched.
Tryning to cancel a confirmation in SRM for a goods receipt without a matched invoice receipt.
"Delete" button is not available but "Return Delivery" button is available.
In R/3 backend I can post a 102 (delete) or a 122 (return) without any issues.
Config settings are the same for 102 and 122 in the R/3 backend.
Any one any ideas?
Cheers
Chris

Delete button not enabled on Inbox Search List

We are using CRM 2007 sp4. In one of our Web Interaction Centers we want to allow certain end users the ability to delete certain transactions from the inbox search list. At present when an item in the result list on the inbox [Component ICCMP_INBOX (Inbox Items)] the delete button is not enabled whilst the Edit, Display and Interact are all enabled. how do we enable the delete button.
Thanks in advance

Hey corrines,
Here is an article for you that will help you troubleshoot this issue with your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/TS1381
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Archive and print and archive buttons not active

I create a smartform and join it in sap. It is transection me9a.
The problem when I run the program comes printpreview. There are two button that "Archive" and "Print and Archive". But they are not active. I wan to use them. What sould I do?

Pass the below parameter to smartform function module,
Ex,
EXPORTING
                control_parameters = control_param
                output_options     = output_opt
Check the below structure:
data: control_param    type ssfctrlop,
         output_opt       type ssfcompop.
control_param-no_dialog = 'X'.
      control_param-preview = 'X'.
      control_param-getotf = ''.
      output_opt-tddest = 'LOCL'.
      output_opt-tdnoprint = 'X'.
Similarly chack the other structure <b>ssfctrlop</b>
Just a rough idea given above.
Close the thread if your question is answered.
Regards,
SaiRam

Buttons Not Active?

Hi,
after an upgrade from ERP2004 to ERP2005 I find that my BSPs are displayed (and enabled) but nothing happens when I press buttons and some MIME objects are not displayed. Have I missed something in SICF? What could be the cause of this problem?
Thanks.
/Elvez

Hi all,
this was an easy one. Some default_host->sap->bc services were not activated. After activating these services everything worked fine.
/Elvez

Delete button not appearing in ESS Family members/Dependends

Hi All,
We have a requirement to add a button delete button on ESS-> Personnel Information-> Family Member/Dependents under Partner, where Partner is custom sub infotype.
For sub types like Spouse, child it is appearing by default, but not apearing for Partner, donno why?
For information: It is calling HRXSS_PER_READ_P0021_GA function module.
From a Webdynrpo applcation, it looks like getting dynamic layout based on a function module.
Kindly, help me.
Regards,
Devender V

it uses USE CASES to add the buttons!
check here
V_T591A
V_T7XSSPERSUBTYP
check the badi HRXSS_PER_BEGDA

Delete button not working on the desktop

Hello There,
I am a new mac user. I don't know but for some reason, delete button on the desktop is not working, i.e. if I want to delete something I have to right click and then select "move to trash", is there are workaround for that, or it is like that only.
Thanks in advance!!
Regards
Nikhil

Hi There,
First, welcome to Macintosh! To delete a file, use Command + Delete (The key with the apple logo on it is the command key.) Pressing delete alone will not move the file to the trash.
Good luck!

Raid Admin 1.5 - Recognize Array button not active

Hi all,
just updated to RaidAdmin 1.5, updated firmware on both controllers to 1.5 version.
I have 6 disks on which should be my lost array. Suddenly 'Recognize Array' button in utilities is not active.
Any idea?
Leos.

ok. The whole story:
Few month ago, I had RAID 3 schema on 6 disks. I did firmware update on my XRaid. This update WAS SUCCESSFUL. After XRaid restart, I lost my array. I didn't have backup. After unsuccessful local Apple support, I tried 3rd party companies to reascue my data. Noone helped me. I managed help from Apple in US, I sent my disks to them (quite expencive, I am from Czech Republic.). They recovered raid set on my disks to RAID 3 schema on 5 disks only - don't understand this. So I called them back a and I sent disks again, with detailed desription how it must be. Thay sayed OK and sent me back 6 disks, with no raid set schema - 6 unassigned to any array. And as a bonus, one of them was failed. So, now I have 6 disks, Apple claims, that raid schema is on disks (but i cannot see it on my raid - I realy tried everything - swapping possitions, controllers, cables .....). So when Raid Admin 1.5 brings this new function - recognize array, I started thinkink, that I have one more chance to recover my data back. But situation is as I described in first topic....

Delete Button not active in Change PO

Similar Messages

Maybe you are looking for