Delete Certain Data in PSA or DSO Objects

Currently we loaded the data into the DSO Objects, and we wanted to delete certain data in the PSA, when I click that particular records, i can only change it but cannot delete it. So is there anyway that i can delete certain data in the psa? Or in DSO Objects?

Hi........
You cannot delete certain data from PSA............If you want to any erroneous request...........you copy the datasource.......go to RSA1 >> Find the datasource >> double click on it >>click on the PSA button on the top >> there in the button you will get one icon which is similar to the icon of the infopackage group in 3.5...........click on it..............there you will get the request...........make the QM status red and delete it....................
For DSO you can do selective deletion :
Goto manage on the ODS/Cube and in there goto the Contents tab. Hit the trash can button that says selective deletion. In there you'll get a selection screen based on which you can delete the data. But be cautious when using this option in case you need to reload the data as you'll have to load exactly the same selection criteria while loading that you used for deletion.
Go through this
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5c7b3cbd556915e10000000a114084/content.htm
Regards,
Debjani............

Similar Messages

Error while loading data from PSA to DSO

Hi,
How to identify the erroneous records in DSO?
While loading the data from PSA to DSO through Process chains we are facing the error says:
"Value '#' (hex. '0023') of characteristic 0BBP_DELREF contains invalid characters"
"Error when assigning SID: Action VAL_SID_CONVERT InfoObject 0BBP_DELREF"
There is no error records in PSA but it seems some invalid characters exists.
Could you please help us how to find the error records in DSO and how to correct it.

Hi,
These are errors BRAIN290 & RSDRO302.
The problem here most likely is that BW doesn't recognise a character you are trying to load. Generally the character is not "#",
as BW displays all symbols it does not recognise as #. You should decode from the hex string what the actual value is. Note that hex values < 20 are not allowed in BW.
Please review Note 173241 and the document mentioned within.
This shows what characters are not allowed in BW characteristic values.
You should check if the character is allowed, and then you can solve the problem in one of the following ways:
1) add this character to the "permitted character" list in RSKC as described in the note.
2) correct the value in the source system.
3) correct the value in the PSA (to do this, you will need to delete the request from the ODS object and then you can change the disallowed character via the PSA maintenance).
4) follow Note 1075403 so that the characters HEX00 to HEX1F are not checked (this affects only characteristics that do not allow "lower case").
5) if you cannot use any of the above options, then you will need to create a routine in your transfer rules for the affected infoobject, and change the value to a character which is permitted in BW.
These are the usual ways to solve this issue.
Rgds,
Colum

Long time to load data from PSA to DSO -Sequential read RSBKDATA_V

Hi ,
It is taking long time to load data from PSA to DSO. It is doing Sequential read on RSBKDATA_V and table contents no data .
we are at - SAPKW70105. It started since yesterday . There is no changes in system parameters.
Please advice.
Thanks
Nilesh

Hi Nilesh,
I guess the following SAP Note will help you in this situation.
[1476842 - Performance: read RSBKDATA only when needed|https://websmp107.sap-ag.de/sap/support/notes/1476842]
Just note that the reference to Support Packages is wrong. It is also included in SAP_BW 701 06.

Error while loading data from PSA to DSO using DTP

Hi,
I have a Unique aplha numeric identifier of type "Char" length "32" . When I am loading the data from PSA to DSO using DTP I get the following error message:
"An error occurred while executing a transformation rule:
The exact error message is
Overflow converting from ' '
The error was triggered at the following point in the program:
GP4JJHUI6HD7NYAK6MVCDY4A01V 425
System response
Processing the data record has been terminated"
Any idea how I can resolve this....
Thanks

Hi,
fist check weather any special characteristics if not
check in data source under this we have fields tab check the format of a particular field format internal/external/check u choose internal format, if any check routine once
use Semantic Groups in the DTP.
Try it
Thanku
lokeeshM
Edited by: lmedaSAP_BI on Oct 20, 2010 6:44 AM

Urgent : Error while loading data from PSA to DSO

Hi,
I am working on 7.0.
When i look for data into PSA then i have 1 date field which is containing data in proper date format. This date field is mapped with 0CALMONTH & 0CALYEAR for which i have written routine and directly assigned to 0DOC_DATE .
I have written a start routine to do some modifications in SOURCE_PACKAGE.
But When i am loading data from PSA to DSO its giving below error:
" Exception wrong_date ; see long text RSTRAN 303
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause. "
I am not getting why this error is coming up
pls guide me !!

you can map the code to DOC_DATE .
The code is used to read from any date and convert that into Fiscal year/period.
Try this code.
data: l_fiscyear type t009b-bdatj.
call function 'FISCPER_FROM_CALMONTH_CALC'
exporting
id_date = COMM_STRUCTURE-doc_date
iv_periv = 'V9'
importing
ev_fiscyear = l_fiscyear.
result value of the routine
RESULT = l_fiscyear.

How to delete the data in PSA

Hi,

Hi,
there is one easy way to delete data from PSA .You can create a process chain have one delete data from PSA step where you need to give PSA table name and request older than (no of days before which you want to delete data ).
Execute it and it will delete all the data before specified no of days .You can add multiple PSA tables here and can delete whole data in one go .
Regards,
Jaya

Deletion of Data From PSA in BI 7.0

Hi All,
my req is tht we are using Full Load info package from DBconnect ..now i want to delete the data from the PSA of the datasource whenever we schedule the info package so that there is only one request in the PSA.
i want to achive this using process chain.....
wt option to select the in the deletion of the PSA process type........and the name of the PSA.

Hi,
Please go through following link
[http://help.sap.com/saphelp_nw70/helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm]

Reporting on Alternate Hierarchy master data (HR-BW) thru DSO object

I have a quick question. I would appreciate if you know of any direction to approach this.
We have a hierarchy in a external system that we want to bring into BW as alternate hierarchies. The hier nodes are a bunch of leagacy hierarchies and the leaves will be 0COSTCENTER (R/3 values). After loading this hierarchy in BW, we need to manipulate and add 0POSITIONS to the 0COSTENTER hierarchies from R3 and store this back as another hierarchy (with 0POSITION as leaves below 0COSTCENTER). Now we need to report on this hierarchy and get stats like # vacant position, occupied position, etc.
Have you seen anybody doing this kind of manipulation, reading hierarchy data into DSO object, reporting, etc?
Any idea will be appreciated.
Thanks
Raj

Hi,
To provide you with further information
i need the following data in my BW report
HRP1000 - OBJID, OTYPE, STEXTBEGDA
HRP1007-STATUS
HRP1011-SOBID, RELAT
HRP1005-TRFGL
PA0002 NACHN, VORNA
<b>PA0007 - WOSTD ( Number of hours per week)
HRP1011 - MOVAG (Number of hours per month)</b>
Some one in HR Fourms told me that these tables are master data tables and i am reporting on master data
So Anil,Quick question if the data i need is master data can i use the cube u suggested
Please update me on this
Thanks a lot

Delete the data from PSA

Hello!
I had unsuccessful data transfer process.
How can I delete the contents of the PSA and load the file into the PSA again?
(tcode, execute steps)
Thank you very much!
regards
Thom

Hi,
Goto - Rsa1 - Modeling tab - datasource - Application Component - Datasource - right click - manage - Select the request and delete then request is deleted from PSA.
Now load data to PSA throught infopackage.
With Regards,
PCR

Delete selected data in psa

Hi guys,
I want to delete some data records in psa based on a range of record number.
Eg. I want to delete records in psa starting from record number 1 to 333.
I would appreicate if someone can help me with that,
zsl05

In the PSA maintenance screen you can select option of load to data target.
While loading from InfoPackage you can select option PSA then data traget. And set error option as 'Valid Records updare, request avilable for reporting (Green)', this way you can update valid records into data target. Though better is to correct error records in PSA, and then load to Data Target. You can also correct Error records later, if you are only update valid records at first load.

Error while transferring Data from PSA to DSO

Hi all,
We had a requirement to load data into the DSO.We are extracting it from R3.
Problem is that while loading in PSA it is showing 1056 records ,But when we are trying to load it in DSO it is showing Transferred records as 1428 and added records as 1073.Please help ASAP!!!!!!!!

Hi,
the difference in records can be due to some changes happening in the transformation.
check your transformation from the DS to your DSO if it contains any start,end or update routines oe any other such thing.
Also check if there is one to one mapping from DS to DSO or if some fields in DS are not mapped to DSO.
Regards,
Dhanya

ERROR DURING LOADING DATA FROM PSA TO DSO IN "PRUEFMBKT"

Respected all
I am trying to load data through an r/3 field( pruefmbkt, char-40length) to infoobject. the data is coming correctly to psa but when i am loading it in to dso or infocube request is turning red giving following error message--
Value '010/12.05-112.15/hold on not operate' (hex.
'3031302F31322E30352D3131322E31352F686F6C64206F6E20') of characteristic
PRU_LSIL contains invalid characters
Message no. BRAIN060
Diagnosis
    Only the following standard characters are valid in characteristic
    values by default:
    !"%&''()*,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.+
    Furthermore, characteristic values that only consist of the character #
    or that begin with ! are not valid.
    You are trying to load the invalid characteristic value 1. (hexidecimal
    representation 3031302F31322E30352D3131322E31352F686F6C64206F6E20).
Procedure for System Administration
    Try to change the invalid characters to valid characters.
    If you want values that contain invalid characters to be admitted into
    the system, make the appropriate setting in BW Customizing. Refer to the
    documentation describing the requirements for special characters and the
    possible consequences.
    For more information on the problems involved with valid and invalid
    characters, click here.
kindly give me the solution how to deal with this problem.
thanks
abhay

HI Abhay,
please check if the infoobject corresponding to field PRU_LSIL in BW system has lower case checkbox enabled in the infoobject properties, as the value '010/12.05-112.15/hold on not operate' coming from R/3 has lower case alphabets.
Hope this helps.
Regards,
Umesh.

How do u delete the data in PSA?

hi this is ramireddy please send me pointes to my mail
my mail: [email protected]

hi reddy,
In the modeling go the PSA
And to the paricular info source right click on it and then select delete psa data.
and u can also delete it by using process chain also by creating a process type.
and there u can mention before how many days after how many requests.
assign points if helps.
yunus.

Long time to load data from PSA to DSO / CUBE. Sequential read RSBKDATA_V

Hi Gurus
The process stays for several hours on sequential read from RSBKDATA_V - temporary storage for DTPs.
After several hours, the processing finally starts, but even when I assign several BGDs to the DTP it takes hours to load the data.
We have BI7.0 with SP22, so all relevant notes are already implemented.
Does any one had similar problem, please?
Thanks in advance
Martin

Hi Martin,
this issue has cropped up a few times. Please check and implement the following notes:
1338465    P22:DTP:LOG: Performance problem when messages are added +
1331544    P22:HINT:Slow performance when accessing RSMONFACT +
1312701    70SP21: Performance on view RSBKDATA_V selects
1304234    70SP21: Performance on the hashed table p_th_rsbkdata_v **
1168098    70SP19: Performance during DataStore object extraction
1080027    70SP16: Performance during parallel processing
These notes should improve the performance of the DTPs in your system.
After you've added the notes, please check in tables RSBKDATA and RSBKDATAINFO whether they contain any data. If the tables are empty, please reorganise the tables, and restart the dtp.
Hope this helps you.
Rgds,
Colum

Loading data fro PSA to DSO

I enhanced 2 fields for 2lis_13_vditm i can see the data for those fields in PSA but when i run DTP i cant see the data records for those enhanced fields.
Thanks

Hi Vamsi,
Once check that weather you have mapped the enhanced fields to Infoobjects in Transformations.Or Any routines were written for the enhanced fields in Transformations which is truncating the records.The catch is there.
Regards
Karthik
***Thanks for whatever points you assign to me

Delete Certain Data in PSA or DSO Objects

Similar Messages

Maybe you are looking for