Delete command sometimes error in CS6

Sometimes in CS6 the delete command just acts as a non-optional "clear" command, and does not show a menu providing the content aware option. Sometimes this cures itself by closing and reopening the program. Sometimes not.
How do I get rid of this defect in the program, why is it there, and have others experienced this?

It depends on whether you're on a layer or on the background.
If on a layer, it's a delete.  If on the background it's a fill.  That's the design behavior.
There are modifier keys (e.g. Shift) you can use if you always want a fill.
-Noel

Similar Messages

  • Undo Message Delete command is sometimes present, sometimes not

    I've noticed that sometimes the Undo Message Delete command is present after I delete a message
    but other times it isn't - all that's there is Undo which is greyed out. Does anyone know the conditions
    under which the Undo Message Delete command appears? I haven't found any consistent pattern.
    I know the message can be manually moved back from the Trash but I've found that occasionally I've inadvertently
    deleted a message without knowing which message it is which makes it rather hard to find in the Trash.

    Open your firewall program. First check the settings. Make sure that the
    program is set to tell you if a new program wants access to the web. Then
    go to the list of programs the firewall has. Make sure that all the programs
    you want to access the web are set to '''ALLOW'''. If it is set to '''AUTO''', the
    firewall may not allow access.
    ====================================
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
    ''(If you're using an added theme, switch to the Default theme.)''
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
    [[Image:FirefoxSafeMode|width=520]]<br><br>
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.
    Thank you.

  • Error "Bridge CS6 was not found on this system. To use this command, please reinstall Bridge CS6"

    Hi all,
    We are having issues with Adobe Bridge working properly with Photoshop.  When trying to access Bridge through Photoshop we receive the following error "Bridge CS6 was not found on this system.  To use this command, please reinstall Bridge CS6"
    - We have the Master Collection CS6 installed
    - Bridge CS6 is working fine as a stand-alone program
    - This is installed on Windows 7 x64
    - I am unable to find an uninstall location for Bridge CS6, it is not under control panel > Adobe Master Suite
    - All adobe products are up-to-date as of this morning.
    Any help would be appreciated.
    Thanks,
    Message title was edited by: Brett N

    Bacterin1 wrote:
    It has not worked previously.
    Does not make a difference is bridge is open or not.
    Yes, we are accessing it through File/browse in bridge.
    OK, back to square 1.
    Does Bridge work normally?  Does it load Bridge CS6 or does CS5 come up?  Only one version can run at same time.
    If you double click on an image it opens in CS6?

  • RMAN-03009: failure of delete command on ... ORA-19606: Cannot copy or rest

    one server using 11.2.0.1.0 under Suse Linux
    configured catalog db, main db & jobs & ... almost everything with enterprise manager
    keep backups 14 days
    To make 14 full online dumps I had to aktive the archive mode and try to get rid of thoose unwanted additional files.
    Additional I make every night (less til no db activity) a dump and compress it myself.
    After some days the backupjob complain that it can not delete old files.
    EM / manage all backups / crosscheck all(
    CROSSCHECK BACKUPSET;
    CROSSCHECK COPY;
    sucessful
    EM / manage all backups / delete old backups
    DELETE NOPROMPT OBSOLETE;
    failed.
    script result
    Recovery Manager: Release 11.2.0.1.0 - Production on Tue Sep 7 17:20:55 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    RMAN>
    connected to target database: <SID> (DBID=773091283)
    RMAN>
    connected to recovery catalog database
    RMAN>
    echo set on
    RMAN> DELETE NOPROMPT OBSOLETE;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=196 device type=DISK
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_<SID>.f
    Backup Set 18750 23-AUG-10
    Backup Piece 18754 23-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/backupset/2010_08_23/o1_mf_nnndf_BACKUP_<SID>CH0_673c0hbp_.bkp
    Backup Set 18751 23-AUG-10
    Backup Piece 18755 23-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/backupset/2010_08_23/o1_mf_nnndf_BACKUP_<SID>CH0_673c0hbo_.bkp
    Backup Set 19479 24-AUG-10
    Backup Piece 19482 24-AUG-10 /tmp/o0lm3qh9_1_1
    Backup Set 19490 24-AUG-10
    Backup Set 20087 24-AUG-10
    Backup Piece 20089 24-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/autobackup/2010_08_24/o1_mf_s_727891232_677n40r3_.bkp
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/07/2010 17:20:57
    ORA-19606: Cannot copy or restore to snapshot control file
    exit;
    Recovery Manager complete.
    google found some questions, but not fittung answers.
    So far:
    - I checked the folder & users rights.
    - I found some /tmp/ files - yes I "backup" the backuped archivelogs to-delete files in /tmp - I only active archivelogmode so I can onlinebackup
    - I managed to login via rman and execute DELETE OBSOLETE manual - result above.
    - Actual I delete the set one by one to find the problem set. (delete backupset 12345 ) from the list manually.
    Some a good idea what went wrong?
    additional: Is there a way to let oracle delete the empy archvielog-directories after deleting the logs within?
    18:00- the command "RMAN> BACKUP CURRENT CONTROLFILE" also fails.
    Edited by: 793286 on 07.09.2010 09:00

    Meanwhile I managed to delete all backupsets one by one.
    The problem with $ORACLE_HOME/dbs/snapcf_<SID>.f persists.
    cd $ORACLE_HOME/dbs
    mv snapcf_<SID>.f snapcf_<SID>.f.bak
    # replaced actual dbsidname with <SID>
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_TARMED1P.f
    Do you really want to delete the above objects (enter YES or NO)? y
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/08/2010 09:44:07
    ORA-19606: Cannot copy or restore to snapshot control file
    mv snapcf_<SID>.f.bak snapcf_<SID>.fRMAN> backup current controlfile;
    Starting backup at 08-SEP-10
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting compressed full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    including current control file in backup set
    channel ORA_DISK_1: starting piece 1 at 08-SEP-10
    channel ORA_DISK_1: finished piece 1 at 08-SEP-10
    piece handle=/srv/ora/data/flash_recovery_area/TARMED1P/backupset/2010_09_08/o1_mf_ncnnf_TAG20100908T095000_68gj1b2m_.bkp tag=TAG20100908T095000 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
    Finished backup at 08-SEP-10
    Starting Control File and SPFILE Autobackup at 08-SEP-10
    piece handle=/srv/ora/data/flash_recovery_area/TARMED1P/autobackup/2010_09_08/o1_mf_s_729165003_68gj1d1b_.bkp comment=NONE
    Finished Control File and SPFILE Autobackup at 08-SEP-10
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_<SID>.f
    Do you really want to delete the above objects (enter YES or NO)? y
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/08/2010 09:52:37
    ORA-19606: Cannot copy or restore to snapshot control file
    No different effect, if I changed the filename via 2nd terminal to .bak or not.
    RMAN> delete controlfilecopy 3831;
    will fail, if the file exists or not.
    Any chance to reset/kill that file?
    Is there a need to restart the dbms after rename the file?

  • Skip the DELETE command on logical standby

    Hi All,
    I want to skip the DELETE command on logical standby.
    DB Version - 10.2
    OS - Linux
    Primary DB and logical standby DB .
    In our DB schema some transaction tables. We delete data from those tables by delete commands.
    Delete command, also delete data from logical standby DB. But we want to skip on logical standby DB .
    I use following for that and get error.
    ALTER DATABASE STOP LOGICAL STANDBY APPLY;
    EXECUTE DBMS_LOGSTDBY.SKIP (stmt =>'DELETE TABLE', schema_name =>'TEST',object_name =>'TRANS',proc_name => null);
    ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
    But I got error
    ERROR at line 1:
    ORA-06550: line 1, column 7:
    PLS-00306: wrong number or types of arguments in call to 'SKIP'
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    When I change stmt =>'DELETE TABLE' to stmt =>'DML', no error happen
    Please help me to solve this issue . This is urgent.
    Thanks in advance.
    Regards

    Dear aditi2,
    Actually it is so simple to understand the problem. Please read the following documentation and try to understand the SKIP procedure.
    http://download.oracle.com/docs/cd/B14117_01/appdev.101/b10802/d_lsbydb.htm#997290
    *SKIP Procedure*
    Use the SKIP procedure to define filters that prevent the application of SQL statements on the logical standby database.
    By default, all SQL statements executed on a primary database are applied to a logical standby database.
    If only a subset of activity on a primary database is of interest for application to the standby database,
    you can use the SKIP procedure to define filters that prevent the application of SQL statements on the logical standby database.
    While skipping (ignoring) SQL statements is the primary goal of filters,
    it is also possible to associate a stored procedure with a DDL filter so that runtime determinations can be made whether to skip the statement,
    execute this statement, or execute a replacement statement.
    Syntax
    DBMS_LOGSTDBY.SKIP (
         stmt                      IN VARCHAR2,
         schema_name               IN VARCHAR2,
         object_name               IN VARCHAR2,
         proc_name                 IN VARCHAR2,
         use_like                  IN BOOLEAN,
         esc                       IN CHAR1);Hope That Helps.
    Ogan
    Edited by: Ogan Ozdogan on 30.Tem.2010 13:03

  • Delete Command

    I am trying to add a delete command using DreamWeaver 8. I am
    using SQL. I add my Delete Command, however, since updating to
    Dreamweaver 8.02, I notice two additional columns in the properties
    and I am unsure what gets entered.
    I can see NAME which i enter IDParam, I see TYPE - unknown, I
    see SIZE - unknown, and RUN-TIME VALUE, which I enter
    Request.Form("MM_recordId"). I get an error when opening the
    DeleteCommand dialog SQL type not recognized
    Can someone tell me what I enter in the TYPE and Size
    column?

    Sorry but wanted to correct u fundamentally
    what r u trying to do ?
    delete from table1 where table1.id = table2.id and table1.firstname = 'john'
    how will u get table2.id when u r not selecting ithe table anywhere ?
    Hope u got my hint ....
    try this way
    delete from table1
    where table1.id =(select table2.id from table1,table2
    where table1.id=table2.id and table1.firstname = 'john' )
    cheers
    SHUBH

  • BAD Command Argument Error. 11 writing to Exchange 2007 - Help Please...

    Hi,
    I am writing an IMAP to IMAP mailbox converter. I am testing a UW mailbox that I have approx. 1200 messages in to a MS Exchange 2007 Server. I am performing a javax.mail.Folder destFolder.appendMessages(sourceFolder.getMessages()). I transfer almost half the messages this why when i get the following exception. I have googled and not found any reference to it, nor does the protocol trace look bazaar :
    javax.mail.MessagingException: A4 BAD Command Argument Error. 11;
    nested exception is:
    com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
    at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2337)
    at com.sun.mail.imap.IMAPFolder.appendMessages(IMAPFolder.java:1289)
    at edu.yale.its.tp.email.conversion.IMAPConverter.copyMessages(IMAPConverter.java:83)
    at edu.yale.its.tp.email.conversion.IMAPConverter.copyFolder(IMAPConverter.java:75)
    at edu.yale.its.tp.email.conversion.IMAPConverter.convert(IMAPConverter.java:36)
    at edu.yale.its.tp.email.conversion.IMAPConverter.start(IMAPConverter.java:27)
    at edu.yale.its.tp.email.conversion.IMAPConverter.main(IMAPConverter.java:16)
    Caused by: com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
    at com.sun.mail.iap.Protocol.handleResult(Protocol.java:296)
    at com.sun.mail.imap.protocol.IMAPProtocol.appenduid(IMAPProtocol.java:881)
    at com.sun.mail.imap.protocol.IMAPProtocol.append(IMAPProtocol.java:835)
    at com.sun.mail.imap.IMAPFolder$10.doCommand(IMAPFolder.java:1292)
    at com.sun.mail.imap.IMAPFolder.doProtocolCommand(IMAPFolder.java:2377)
    at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2332)
    ... 6 more
    Here is the protocol trace...
    0 [main] INFO - start Conversion
    DEBUG: JavaMail version 1.4ea
    DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
    DEBUG: Tables of loaded providers
    DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
    DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
    DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
    DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
    DEBUG: mail.imap.partialfetch: false
    * OK [CAPABILITY IMAP4REV1 LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] pantheon-po09.its.yale.edu IMAP4rev1 2002.336 at Fri, 21 Sep 2007 09:34:04 -0400 (EDT)
    IMAP DEBUG: AUTH: PLAIN
    IMAP DEBUG: AUTH: LOGIN
    A0 CAPABILITY
    * CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN
    A0 OK CAPABILITY completed
    IMAP DEBUG: AUTH: PLAIN
    IMAP DEBUG: AUTH: LOGIN
    DEBUG: protocolConnect login, host=pantheon-po09.its.yale.edu, user=jjv6, password=<non-null>
    A1 AUTHENTICATE PLAIN
    +
    +*<----REMOVED---->*+
    A1 OK [CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND] User jjv6 authenticated
    DEBUG: JavaMail version 1.4ea
    DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
    DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
    DEBUG: Tables of loaded providers
    DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
    DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
    DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
    DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
    DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
    DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
    DEBUG: mail.imap.partialfetch: false
    * OK Microsoft Exchange Server 2007 IMAP4 service ready
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE LITERAL+
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    IMAP DEBUG: AUTH: GSSAPI
    DEBUG: protocolConnect login, host=connect.yale.edu, user=jjv6, password=<non-null>
    A1 LOGIN +*<----Removed---->*+
    A1 OK LOGIN completed.
    A2 LIST "" "Sakai-Dev List"
    * LIST (\HasNoChildren) "/" "Sakai-Dev List"
    A2 OK LIST completed.
    DEBUG: connection available -- size: 1
    A2 EXAMINE "Sakai-Dev List"
    * 1206 EXISTS
    * 2 RECENT
    * OK [UIDVALIDITY 1151671867] UID validity status
    * OK [UIDNEXT 11497] Predicted next UID
    * FLAGS (Junk NonJunk $Label5 $Label1 $Label2 $Label3 $Label4 $MDNSent \Answered \Flagged \Deleted \Draft \Seen)
    * OK [PERMANENTFLAGS ()] Permanent flags
    * OK [UNSEEN 8] first unseen message in /imap/j/jjv6/Sakai-Dev List
    A2 OK [READ-ONLY] EXAMINE completed
    DEBUG: connection available -- size: 1
    A3 SELECT "Sakai-Dev List"
    * 524 EXISTS
    * 0 RECENT
    * FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
    * OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
    * OK [UIDVALIDITY 13758] UIDVALIDITY value
    * OK [UIDNEXT 525] The next unique identifier value
    A3 OK [READ-WRITE] SELECT completed.
    A3 LIST "" "Sakai-Dev List"
    * LIST (\NoInferiors \UnMarked) "/" "Sakai-Dev List"
    A3 OK LIST completed
    3080 [main] DEBUG - Source Messages : 1206
    3080 [main] DEBUG - Dest Messages : 524
    3080 [main] DEBUG - Copying 1206 Messages
    A4 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE)
    * 1 FETCH (ENVELOPE ("Tue, 21 Aug 2007 13:35:23 -0700 (PDT)" "Re: Sakai portlet problem in uPortal" (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) ((NIL NIL "sakai-dev" "collab.sakaiproject.org")) NIL NIL "<[email protected]>" "<[email protected]>") INTERNALDATE "21-Aug-2007 16:37:20 -0400" RFC822.SIZE 7024)
    A4 OK FETCH completed
    A5 FETCH 1 (BODY[])
    * 1 FETCH (BODY[] {7024}
    Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
    by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
    (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
    Tue, 21 Aug 2007 16:37:19 -0400
    Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
    by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
    Tue, 21 Aug 2007 16:37:18 -0400
    Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
    by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
    Tue, 21 Aug 2007 20:54:16 +0100 (BST)
    Message-ID: <[email protected]>
    Mime-Version: 1.0
    Content-Transfer-Encoding: 7bit
    Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
    by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
    for <[email protected]>;
    Tue, 21 Aug 2007 20:53:07 +0100 (BST)
    Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
    by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
    for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
    Received: from isper.nabble.com ([192.168.236.156])
    by kuber.nabble.com with esmtp (Exim 4.63)
    (envelope-from <[email protected]>)
    id 1INaRf-0004yq-5U
    for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
    Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
    From: Onur Sirin <[email protected]>
    To: [email protected]
    Subject: Re: Sakai portlet problem in uPortal
    In-Reply-To: <[email protected]>
    X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
    X-Nabble-From: [email protected]
    References: <[email protected]> <[email protected]>
    X-Content-Type-Message-Body: text/plain; charset=us-ascii
    Content-Type: text/plain; charset=us-ascii
    X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
    X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
    X-Yale-Spam-Score: (0)
    X-Yale-Filter-Score: 0
    X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
    Hi Charles,
    I used a portlet you created first but not in trunk. (as sakai-dash.war
    file) This might be older one.
    From catalina.out i get following logs.First, as always i get:
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,279
    SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,285
    SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,460
    SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,466
    SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    I don't know what it is. !!!
    And then, when i logged into portal, i get the following message:
    SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
    fn=Onur ln=Sirin [email protected] ip=10.4.3.1
    Site exists...~onursirin
    That's all what i see in catalina.out.
    By the way, we are using Cisco CSS (Content Switch) for Load Balancing
    process.
    Behind CSS, there is apache server and application server installed on two
    servers which mentioned in this page
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    as thin client .
    CSS DNS address = sucourse.sabanciuniv.edu
    App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
    It is enough to type sucourse.sabanciuniv.edu address in web browser.
    Their sakai.properties files are similar. However, there are following
    parameters that i didn't use in my sakai.properties file. May be i should
    use them. !!
    [email protected]
    [email protected]
    [email protected]
    Now, i have changed my connection type by connecting Campus VPN server with
    Checkpoint VPN client, i got my sakai course pages correctly via sakai
    portlet. However, in campus i had same problem today.
    So, like i said, the situation is changing due to unknown reason.
    From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
    https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
    That's all.
    Thank you for your response Charles !
    Regards
    Charles Severance wrote:
    View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
    Sent from the Sakai - Development mailing list archive at Nabble.com.
    This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
    You can modify how you receive notifications at My Workspace > Preferences.
    A5 OK FETCH completed
    A6 FETCH 1 (FLAGS)
    * 1 FETCH (FLAGS (\Seen \Deleted NonJunk))
    A6 OK FETCH completed
    A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
    A7 FETCH 1 (BODY[])
    * 1 FETCH (BODY[] {7024}
    Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
    by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
    (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
    Tue, 21 Aug 2007 16:37:19 -0400
    Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
    by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
    Tue, 21 Aug 2007 16:37:18 -0400
    Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
    by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
    Tue, 21 Aug 2007 20:54:16 +0100 (BST)
    Message-ID: <[email protected]>
    Mime-Version: 1.0
    Content-Transfer-Encoding: 7bit
    Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
    by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
    for <[email protected]>;
    Tue, 21 Aug 2007 20:53:07 +0100 (BST)
    Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
    by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
    for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
    Received: from isper.nabble.com ([192.168.236.156])
    by kuber.nabble.com with esmtp (Exim 4.63)
    (envelope-from <[email protected]>)
    id 1INaRf-0004yq-5U
    for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
    Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
    From: Onur Sirin <[email protected]>
    To: [email protected]
    Subject: Re: Sakai portlet problem in uPortal
    In-Reply-To: <[email protected]>
    X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
    X-Nabble-From: [email protected]
    References: <[email protected]> <[email protected]>
    X-Content-Type-Message-Body: text/plain; charset=us-ascii
    Content-Type: text/plain; charset=us-ascii
    X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
    X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
    X-Yale-Spam-Score: (0)
    X-Yale-Filter-Score: 0
    X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
    Hi Charles,
    I used a portlet you created first but not in trunk. (as sakai-dash.war
    file) This might be older one.
    From catalina.out i get following logs.First, as always i get:
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,279
    SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,285
    SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,460
    SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,466
    SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    I don't know what it is. !!!
    And then, when i logged into portal, i get the following message:
    SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
    fn=Onur ln=Sirin [email protected] ip=10.4.3.1
    Site exists...~onursirin
    That's all what i see in catalina.out.
    By the way, we are using Cisco CSS (Content Switch) for Load Balancing
    process.
    Behind CSS, there is apache server and application server installed on two
    servers which mentioned in this page
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    as thin client .
    CSS DNS address = sucourse.sabanciuniv.edu
    App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
    It is enough to type sucourse.sabanciuniv.edu address in web browser.
    Their sakai.properties files are similar. However, there are following
    parameters that i didn't use in my sakai.properties file. May be i should
    use them. !!
    [email protected]
    [email protected]
    [email protected]
    Now, i have changed my connection type by connecting Campus VPN server with
    Checkpoint VPN client, i got my sakai course pages correctly via sakai
    portlet. However, in campus i had same problem today.
    So, like i said, the situation is changing due to unknown reason.
    From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
    https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
    That's all.
    Thank you for your response Charles !
    Regards
    Charles Severance wrote:
    View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
    Sent from the Sakai - Development mailing list archive at Nabble.com.
    This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
    You can modify how you receive notifications at My Workspace > Preferences.
    A7 OK FETCH completed
    Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
    by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
    (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
    Tue, 21 Aug 2007 16:37:19 -0400
    Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
    by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
    Tue, 21 Aug 2007 16:37:18 -0400
    Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
    by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
    Tue, 21 Aug 2007 20:54:16 +0100 (BST)
    Message-ID: <[email protected]>
    Mime-Version: 1.0
    Content-Transfer-Encoding: 7bit
    Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
    by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
    for <[email protected]>;
    Tue, 21 Aug 2007 20:53:07 +0100 (BST)
    Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
    by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
    for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
    Received: from isper.nabble.com ([192.168.236.156])
    by kuber.nabble.com with esmtp (Exim 4.63)
    (envelope-from <[email protected]>)
    id 1INaRf-0004yq-5U
    for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
    Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
    From: Onur Sirin <[email protected]>
    To: [email protected]
    Subject: Re: Sakai portlet problem in uPortal
    In-Reply-To: <[email protected]>
    X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
    X-Nabble-From: [email protected]
    References: <[email protected]> <[email protected]>
    X-Content-Type-Message-Body: text/plain; charset=us-ascii
    Content-Type: text/plain; charset=us-ascii
    X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
    X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
    X-Yale-Spam-Score: (0)
    X-Yale-Filter-Score: 0
    X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
    Hi Charles,
    I used a portlet you created first but not in trunk. (as sakai-dash.war
    file) This might be older one.
    From catalina.out i get following logs.First, as always i get:
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,279
    SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,285
    SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    WARN: Shared Segment file is missing
    /home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
    23:02:38,460
    SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
    ERROR: There has been a major poblem with the Search Index which has become
    corrupted (2007-08-21 23:02:38,466
    SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
    java.io.IOException: No Index available to open
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
    at
    org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
    at
    org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
    at
    org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
    at
    org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
    at java.lang.Thread.run(Thread.java:595)
    I don't know what it is. !!!
    And then, when i logged into portal, i get the following message:
    SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
    fn=Onur ln=Sirin [email protected] ip=10.4.3.1
    Site exists...~onursirin
    That's all what i see in catalina.out.
    By the way, we are using Cisco CSS (Content Switch) for Load Balancing
    process.
    Behind CSS, there is apache server and application server installed on two
    servers which mentioned in this page
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
    as thin client .
    CSS DNS address = sucourse.sabanciuniv.edu
    App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
    It is enough to type sucourse.sabanciuniv.edu address in web browser.
    Their sakai.properties files are similar. However, there are following
    parameters that i didn't use in my sakai.properties file. May be i should
    use them. !!
    [email protected]
    [email protected]
    [email protected]
    Now, i have changed my connection type by connecting Campus VPN server

    The command that seems to be causing problems for Exchange is this one:
    A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
    As far as I can see, there's nothing wrong with the syntax of that command.
    My first guess is that Exchange is unhappy with the flags. Possibly
    it refuses to append a message with the \Deleted flag set. If you're
    willing to modify the flags in the source mailbox, I would try turning
    off the DELETED flag. Or, try not copying deleted messages.
    If that doesn't work, the next thing to try is to get rid of all of the
    flags. You might want to copy the message into a local copy
    in order to lose all the flags from the original.

  • Problem with delete command through JDBC

    hi all,
    I have the following code in a Java program
    try
    DriverManager.registerDriver
    (new oracle.jdbc.driver.OracleDriver());
    conn = DriverManager.getConnection(
    "jdbc:oracle:thin:@localhost:1521:orcl", "airport", "airport");
    catch (SQLException ex)
    ex.printStackTrace();
    Every statement works fine except the delete command. When i try to execute this statement:
    stmt = conn.createStatement();
    stmt.executeUpdate("DELETE FROM distances");
    the program stalls. The table "distances" is owned by the user airport and this sql command works fine when I execute it in SQL+. The problem occurs when I try to execute a delete command through JDBC.
    Can anyone help me?
    Thanks...

    It seems that the problem ocuurs only when there are pending transactions.Correct. There are uncommitted INSERT/UPDATE/DELETEs on the table. Readers never block writers, thus having opened SELECT cursors on the table is not a problem. You writer process must be blocked by another writer process. (assuming of course no JDBC thin driver error - of which I've heard rumours there are or were quite a few - not using thin JDBC myself, thus cannot comment on whether these rumours are valid or not)
    What I would think a bit concerning is that one application trashing a table (deleting all the data) while other applications/users are busy changing data in that table. Why are they changing data that will be immediately trashed after they have committed their transactions? Surely they are wasting time and resources all around (user-side and server-side) by doing work that will be immediately invalidated? This kind of points to me to a database or application design problem.

  • RMAN-03002: failure of delete command

    DB:10.2.0.3.0
    OS:AIX 64 bits
    Hi All,
    We have configured backup default device on Disk.
    On using the command within run block:
    delete noprompt obsolete;
    We get the error:
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of delete command at 02/06/2009 11:07:04
    RMAN-06091: no channel allocated for maintenance (of an appropriate type)
    RMAN>
    Recovery Manager complete.
    Return Code: 1
    Now when we use the commmand :RMAN> delete noprompt obsolete device type disk;
    We do not get the above error.
    Question: Is it necessary to issue the command - "device type disk"; as above with "delete noprompt obsolete " though default backup device type is configured to DISK.Won't RMAN itself identify the default device type - Disk.
    Thanks for your time!
    Regards,

    RMAN> show all;
    starting full resync of recovery catalog
    full resync complete
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK;
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/production_dump/database/EW01/Backup%d_DB_%u_%s_%p_%T';
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/apps/ew01/oracle/10.2.0/dbs/snapcf_ew01.f'; # default
    RMAN>
    RMAN>

  • Understanding the dataadapter.delete command

    I'm new to ADO and ODP so forgive me if I'm missing the obvious. I want to do a simple delete from the database. The problem is I feel like I have to issue the delete command twice. The code I've posted blow works but I don't understand why. I create two commands one a select command the second a delete command. I apply these commands to a dataadapter and then use dataadapter .fill() to get a dataset.
    Great it works fine up to this point. The problem was when I called dataadapter.update nothing would happen. The delete command was ignored. So I looped through the resulting dataset and deleted the record from there. Then I called dataadapter.update and it worked. I tried not setting the dataadapter.deletecommand but then update failed.
    Now my question is: Is it always necessary to delete from a dataset as well as issue a delete command or is there a way of issuing just one delete command? Is it possible to simplify my code?
    Any suggestions or help greatly appreciated.
    Drew
    Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
    Dim oradb As String = "Data Source=vulcan.world;User Id=adowling;Password=aragon;"
    Dim conn As New OracleConnection(oradb)
    Dim cmd As New OracleCommand
    Dim cmd2 As New OracleCommand
    Dim orada As New OracleDataAdapter
    Dim dsLog As New DataSet
    Dim drDelete As DataRow
    Dim myCol As DataColumn
    Dim dcPK(1) As DataColumn
    Dim i As Integer
    Dim rc As DataRowCollection
    Dim pSDEWorkspace As IWorkspaceFactory2
    Try
    conn.Open()
    cmd.Connection = conn
    cmd.CommandText = "select * from t.reconcile_log"
    cmd.CommandType = CommandType.Text
    orada.SelectCommand = cmd
    cmd2.Connection = conn
    cmd2.CommandText = "delete from t.reconcile_log where objectid = " + TextBox1.Text
    cmd2.CommandType = CommandType.Text
    orada.DeleteCommand = cmd2
    orada.Fill(dsLog, "Reconcile_Log")
    orada.MissingSchemaAction = MissingSchemaAction.AddWithKey
    myCol = dsLog.Tables("Reconcile_Log").Columns.Item(dsLog.Tables("Reconcile_Log").Columns.IndexOf("OBJECTID"))
    dcPK(0) = myCol
    dsLog.Tables("Reconcile_Log").PrimaryKey = dcPK
    drDelete = dsLog.Tables("Reconcile_Log").Rows.Find(TextBox1.Text)
    drDelete.Delete()
    orada.Update(dsLog, "Reconcile_Log")
    ListBox1.Items.Clear()
    rc = dsLog.Tables("Reconcile_Log").Rows
    For i = 0 To rc.Count - 1
    ListBox1.Items.Add(Convert.ToString(rc.Item(i).Item(0)) + " " + rc.Item(i).Item(1) + " submitted " + rc.Item(i).Item(2) + " on " + rc.Item(i).Item("submitted"))
    Next i
    Catch ex As OracleException
    Select Case ex.Number
    Case 1
    MessageBox.Show("Error attempting to insert duplicate data.")
    Case 12545
    MessageBox.Show("The database is unavailable.")
    Case 904
    MessageBox.Show("invalid type")
    Case Else
    MessageBox.Show("Database error: " + ex.Message.ToString())
    End Select
    Catch ex As Exception
    MessageBox.Show(ex.ToString)
    Finally
    conn.Close()
    conn.Dispose()
    End Try
    End Sub

    Because the dataset is disconnected from the database. This allows you to load some data (into your dataset), disconnect from the network or whatever, make whatever changes you like and have none of this affect the data in the database until you issue the update.
    If you actually want to have your changes applied immediately then you can (assuming your application is constantly connected of course). Don't bother with a dataset/data adaptor at all. For example set up the sql select statement, assign it to a reader, execute the reader, store the rows returned in some custom objects or whatever. Make some changes and then use executeNonQuery to apply the updates, either one at a time or as a batch using array binding. There is a samples folder where you installed ODP.NET, have a look at some of the others.

  • Handle same delete command from 2 different sessions!

    Dear All,
    My database is 11gR2. I am in a situation where 2 applications are using the same database. There are times when the same delete command is issued from both applications that hangs the DB. None of the query is successfully executed.
    I want to lock the rows so that the first query executes and while second waits and when first completes second query is executed, though it wont delete any records as records are delete from the first query. But there is no hanging situation. Should I lock the table before running the query? or i first select the records using for update?
    Kindly help on this.
    Regards,
    Imran

    Thanks, The details are:
    Actually my applications are the 2 radius servers that are again getting requests from BRAS server. BRAS issues a delete command to radius server 1, if radius server is busy and takes longer then 3 seconds to respond BRAS issues the same command to radius server 2. When the same command from 2 different servers executes on the DB there is kind of dead lock, when this situation happens I have to terminate session of any one radius server and then the other query gets executed.
    I understand that Oracle takes care of this automatically but in my situation my DB is under tremendous load and sometimes I have to terminate sessions.
    Its a simple delete command with some selection. I hope this helps a bit.
    Regards, Imran

  • Help for Delete command syntax

    1. When i use command:
    select * from families f, type_family t where f.family_name = t.family and f.type_id != t.type_id
    I get the output successfully.
    2. But I want to run a command like:
    Delete from families f, type_family t where f.family_name = t.family and f.type_id != t.type_id
    then it is giving me error....
    Any solution for this Delete command??????????????

    delete from families where family_name=(select family from type_family) and type_id 1=(select type_id from type_family)
    this query :-
    select family from type_family returs more than one more row
    you should use "In" operator. Hey study the ORACLE Basic Documents you doubts will be clear..
    Thanks & Regards,
    Pavan Kumar N

  • Javax.mail.MessagingException: A5 BAD Command Argument Error. 12;

    This error appeared on mailboxes hosted on Exchange 2007. It happens when a folder is searched with 11+ OR terms. It works fine with <= 10 subjectTerm items OR'ed together. The search term does not matter. The mailboxes are migrating from Exchange 2003 where the problem does not occur. I tested 51 OR'ed subject terms against the 2003 mailbox and it works fine. I didn't test beyond 51 terms.
    I upgraded to JavaMail 1.4.2 and the problem still exists.
    I'm not sure if this is a JavaMail bug or an error with Exchange 2007.
    Here is the output generated with session debugging enabled against Exchange 2007:
    DEBUG: setDebug: JavaMail version 1.4.2
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
    DEBUG: mail.imap.fetchsize: 16384
    DEBUG: mail.imap.statuscachetimeout: 1000
    DEBUG: mail.imap.appendbuffersize: -1
    DEBUG: mail.imap.minidletime: 10
    DEBUG: trying to connect to host "qtdenexcam20.ad.domain.com", port 143, isSSL false
    * OK Microsoft Exchange Server 2007 IMAP4 service ready
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    IMAP DEBUG: AUTH: GSSAPI
    IMAP DEBUG: AUTH: PLAIN
    DEBUG: protocolConnect login, host=qtdenexcam20.ad.domain.com, user=userid, password=<non-null>
    A1 AUTHENTICATE PLAIN
    +
    d21kZXYAd21kZXYAUXczc3QyMDA4
    A1 OK AUTHENTICATE completed.
    A2 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
    A2 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    IMAP DEBUG: AUTH: GSSAPI
    IMAP DEBUG: AUTH: PLAIN
    Opening email folders.
    DEBUG: connection available -- size: 1
    A3 SELECT INBOX
    * 23 EXISTS
    * 0 RECENT
    * FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
    * OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
    * OK [UNSEEN 6] Is the first unseen message
    * OK [UIDVALIDITY 765] UIDVALIDITY value
    * OK [UIDNEXT 15790] The next unique identifier value
    A3 OK [READ-WRITE] SELECT completed.
    A4 LIST INBOX ""
    * LIST (\Noselect \HasChildren) "/" ""
    A4 OK LIST completed.
    * OK Microsoft Exchange Server 2007 IMAP4 service ready
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    IMAP DEBUG: AUTH: GSSAPI
    IMAP DEBUG: AUTH: PLAIN
    A1 AUTHENTICATE PLAIN
    +
    d21kZXYAd21kZXYAUXczc3QyMDA4
    A1 OK AUTHENTICATE completed.
    A2 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI AUTH=PLAIN STARTTLS IDLE NAMESPACE LITERAL+
    A2 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    IMAP DEBUG: AUTH: GSSAPI
    IMAP DEBUG: AUTH: PLAIN
    A3 LIST "" Folders/processed_items_LARG
    * LIST (\HasChildren) "/" Folders/processed_items_LARG
    A3 OK LIST completed.
    A4 LIST "" Folders/junk_LARG
    * LIST (\HasNoChildren) "/" Folders/junk_LARG
    A4 OK LIST completed.
    Retrieving all messages from: INBOX
    23 messages retrieved.
    Processing junk email.
    *** Searching for junk mail ***
    A5 SEARCH OR OR OR OR OR OR OR OR OR OR SUBJECT test1 SUBJECT test2 SUBJECT test3 SUBJECT test4 SUBJECT test5 SUBJECT test6 SUBJECT test7 SUBJECT test8 SUBJE
    CT test9 SUBJECT test10 SUBJECT test11 1:23
    A5 BAD Command Argument Error. 12
    Exception caught in main while processing config/email.larg.properties.
    javax.mail.MessagingException: A5 BAD Command Argument Error. 12;
    nested exception is:
    com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
    javax.mail.MessagingException: A5 BAD Command Argument Error. 12;
    nested exception is:
    com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
    at com.sun.mail.imap.IMAPFolder.search(IMAPFolder.java:1706)
    at com.domain.nroc.email.WMSEmailAgent.processJunkEmail(Unknown Source)
    at com.domain.nroc.email.WMSEmailAgent.main(Unknown Source)
    Caused by: com.sun.mail.iap.BadCommandException: A5 BAD Command Argument Error. 12
    at com.sun.mail.iap.Protocol.handleResult(Protocol.java:338)
    at com.sun.mail.imap.protocol.IMAPProtocol.issueSearch(IMAPProtocol.java:1550)
    at com.sun.mail.imap.protocol.IMAPProtocol.search(IMAPProtocol.java:1458)
    at com.sun.mail.imap.protocol.IMAPProtocol.search(IMAPProtocol.java:1433)
    at com.sun.mail.imap.IMAPFolder.search(IMAPFolder.java:1687)
    ... 2 more
    I'll post the Exchange 2003 debug output in a follow-up message because this message is exceeding the length limit.

    Here is the output generated with session debugging enabled against Exchange 2003 (and 51 subject terms):
    DEBUG: setDebug: JavaMail version 1.4.2
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
    DEBUG: mail.imap.fetchsize: 16384
    DEBUG: mail.imap.statuscachetimeout: 1000
    DEBUG: mail.imap.appendbuffersize: -1
    DEBUG: mail.imap.minidletime: 10
    DEBUG: trying to connect to host "itdene2km05.ad.domain.com", port 143, isSSL false
    * OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (ITDENE2KM05.AD.DOMAIN.COM) ready.
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    DEBUG: protocolConnect login, host=itdene2km05.ad.domain.com, user=ad\userid, password=<non-null>
    A1 LOGIN "ad\\userid" pass
    A1 OK LOGIN completed.
    A2 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
    A2 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    Opening email folders.
    DEBUG: connection available -- size: 1
    A3 SELECT INBOX
    * 1 EXISTS
    * 0 RECENT
    * FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
    * OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
    * OK [UIDVALIDITY 597925] UIDVALIDITY value
    A3 OK [READ-WRITE] SELECT completed.
    A4 LIST INBOX ""
    * LIST (\Noselect) "/" ""
    A4 OK LIST completed.
    * OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 (ITDENE2KM05.AD.DOMAIN.COM) ready.
    A0 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
    A0 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    A1 LOGIN "ad\\userid" pass
    A1 OK LOGIN completed.
    A2 CAPABILITY
    * CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
    A2 OK CAPABILITY completed.
    IMAP DEBUG: AUTH: NTLM
    A3 LIST "" Folders/processed_items_LARG
    * LIST (\HasChildren) "/" Folders/processed_items_LARG
    A3 OK LIST completed.
    A4 LIST "" Folders/junk_LARG
    * LIST (\HasNoChildren) "/" Folders/junk_LARG
    A4 OK LIST completed.
    Retrieving all messages from: INBOX
    1 messages retrieved.
    Processing junk email.
    *** Searching for junk mail ***
    A5 SEARCH OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR OR
    OR SUBJECT test1 SUBJECT test2 SUBJECT test3 SUBJECT test4 SUBJECT test5 SUBJECT test6 SUBJECT test7 SUBJECT test8 SUBJECT test9 SUBJECT test10 SUBJECT test1
    1 SUBJECT test12 SUBJECT test13 SUBJECT test14 SUBJECT test15 SUBJECT test16 SUBJECT test17 SUBJECT test18 SUBJECT test19 SUBJECT test20 SUBJECT test21 SUBJE
    CT test22 SUBJECT test23 SUBJECT test24 SUBJECT test25 SUBJECT test26 SUBJECT test27 SUBJECT test28 SUBJECT test29 SUBJECT test30 SUBJECT test31 SUBJECT test
    32 SUBJECT test33 SUBJECT test34 SUBJECT test35 SUBJECT test36 SUBJECT test37 SUBJECT test38 SUBJECT test39 SUBJECT test40 SUBJECT test41 SUBJECT test42 SUBJ
    ECT test43 SUBJECT test44 SUBJECT test45 SUBJECT test46 SUBJECT test47 SUBJECT test48 SUBJECT test49 SUBJECT test50 SUBJECT "Exchange Maintenance" 1
    * SEARCH 1
    A5 OK SEARCH completed.
    1 junk email items identified.
    A5 LIST "" Folders/junk_LARG

  • HT1338 Command Argument Error. 11

    I am using Mac Office on a relatively new MacBook Pro running OSX 10.8.2 which is all updated and running well.
    However, just lately I keep getting the above error message;
    "COMMAND ARGUMENT ERROR.11"
    appear every tme I open Outlook, the message will repeat for all email accounts on outlook.
    I have cleared everything out of any junk any trash, cleared cookies anything I can think of.
    Does anyone know what this is, and how to get rid of??

    Absolutely fantastic advice.  Thank you so much.  I was receiving this error message and had read various scary stories about needing to reinstall Outlook and deleting identities etc.  The simple step you advise resolved the issue.  Thanks again
    luisalva777 wrote:
    I found out that you would received this message when attempting to send a big file, if you deleted it goes to the deleted folder at the IMAP server so the exchange will still send you those message back. I got rid off the file from the deleted and sent items in the exchange server and it solved my problem.

  • How to delete the runtime error in st22

    Hi all,
            How to delete the runtime error in ST22. I want to clear
    the list of short dump in st22
    is there any T.code or any table to clear?
    thanks in advance
    sundar.c

    Hi
    you cannot delete the dumps through any tcode.
    All the dumps are stored in table called SNAP, If there are more dumps the table gets filled therefore u have to reorganize the table.
    Run the report RSSNAPDL in SE38.
    or
    You have the default SAP background jobs, SAP_REORG_ABAPDUMPS which deletes the past dumps raised in the system.
    Scheduling the jobs in regular is very important
    For more information
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7ede505211d189550000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d8/a58b4275160d53e10000000a155106/frameset.htm
    Regards
    Bhaskar

Maybe you are looking for