Delete company code effect cross company codes

Hi
We deleted one company code as per our business need.
now the problem is cost center is picking that particular company code when we are trying to make outbound to interface.
Please let us know where to make cross company code configuration changes when we delete company code.
Thanks in advance
prasad reddy

Hello
Reset settings in OBYA
reg

Similar Messages

  • Changing controlling area from single company code to cross company code

    Hi,
    Due to my client requirement, in the middle of the year, we need to change the controlling area from being same as company code to cross company code controlling area. Although the currency is same. We are going to create a new company code. Is the changing controlling area settings possible to do? what are the precautions and changes need to be taken?
    One more question, we need to change the company code when the new company code is created in the system in Cost Center Masters in the middle of the year. Is this possible after changing controlling area from single company code to cross company code. Right now company code is not appearing in the cost center master.
    Thanks & Regards,
    Saidarao

    Hi,
          If both companies having transaction data its not possible,Normally before defining Organisational Strucutre only we have to deside both companies is assigning same controlling are or have to maitain separately for this we have to compare the Fiscal year,Operating chart of accounts ,if both having same then we will assign both the company codes to one controlling area if these two companies having different currencies also its not a problem.When we creating Controlling Area we have to choose option of controlling area as same company code (if one company code one controlling Area) for example if you assigning two companies then we have to use cross company code cost accounting.If u need any further information let me know.
    Regards,
    Satya

  • How to activate Compny code validation ( cross company code)

    *Hi ,*
    *We migrated classic GL to New GL before one month Now*
    *I am rollout new company code, after completed all configuration I found uncopmplit  configuration of company code validation is not active in  controlling area config ( Transaction Code- OKKP) , which is related to cross company code ( Indicator for company code validation )*
    *can anybody provide solution to activate company code validation*
    Thank ,
    Jeetendra

    Hi ,
    I want to activate company code validation for cross company code still it is inactive
    without  activation I can not use cross company code for costing
    Edited by: jitu konde on Jun 15, 2011 9:38 AM

  • How to use Cross Company Code document  number as Reffrence.

    Hi
    Actually user wants to post the same debit credit line items with Editing the amounts which he has posted last month
    So i suggested him to use post refference of the previous month document number.
    Since that is Cross company document number. There is no source to give  in T.Code FBR2. There is a fecility to give only document number of a company code not cross company code.
    Assume that there are 3 company's involved in that document.
    company  X --- 25 line items
    company  Y -- 75 line items
    Company  Z -- 100 line items
    Since he given in header data X Co code it has generated the Cross company code document number 1000X 08 ( which means 1000 is doc.number X is company code 08 is year. This is sap standard cross company code doc number format)
    and individual document number is
    X - 1000
    Y-  2000
    Y-  3000
    If he post with the reffrence of X company only 25 lines will come remaining 175 line he as to post manually.
    If he take Y Doc number  only 75 lines will come
    If he take Z Doc number  only 100 lines will come
    To bring all lines there is no provision to give Cross company Doc number.
    Please advice how to use cross company doc number as refference.
    Tks
    Shivaji

    Hi guru
    This is answered
    Thanks
    shivaji

  • Report painter,cross company code transactions

    Hi Masters,
    1,  Please send material of  REPORT PAINTER ?
    2,  Please  Send material of CROSS COMPANY CODE TRANSACTIONS
    3.  Please send material of  FUNCTIONAL SPECTS
    my  mail id [email protected]
      Thank you friends

    Hi,
    Hi,
    Cross-Company-Code Configurations
    Step1: T Code: OBYA
    We have to maintain Receiver Company Code as Customer in Sender Company Code and Sender Company Code as Vendor in Receiver Company Code. Then problem will be solved.
    Step2: T Code: OB60
    There you can find 4 line items, Copy all the 4 Line Items using Copy As button and customize to your company code.
    Cross-Company-Code Transactions
    1. To Change Cross Company Code Document: T Code: FBU2 - Change
    2. To Display Cross Company Code Document: T Code: FBU3 - Display
    3. To Reverse Cross Company Code Document: T Code: FBU8 - Reverse
    regards,
    Santosh kumar

  • Cross company code transactions

    All gurus,, I have one problem in Cross company code transactions:
    Ex: I have Company code A and B,,, where A pays on behalf of B. how to configure and what is process to follow in APP for making payment to vendor of B...
    A pays to vendor of B... how it happens in APP.
    Santosh.

    Hi,
    Hi,
    Cross-Company-Code Configurations
    Step1: T Code: OBYA
    We have to maintain Receiver Company Code as Customer in Sender Company Code and Sender Company Code as Vendor in Receiver Company Code. Then problem will be solved.
    Step2: T Code: OB60
    There you can find 4 line items, Copy all the 4 Line Items using Copy As button and customize to your company code.
    Cross-Company-Code Transactions
    1. To Change Cross Company Code Document: T Code: FBU2 - Change
    2. To Display Cross Company Code Document: T Code: FBU3 - Display
    3. To Reverse Cross Company Code Document: T Code: FBU8 - Reverse
    regards,
    Santosh kumar

  • Can We Two Different Credit Control Area to 1 company code using cross comp

    Can We Two Different Credit Control Area to 1 company code using cross company code assignment.Tried but giving error at the time of bill release.Experts Can you help?

    Hi,
    It is not possible to have more than one credit  control are for a single company code.

  • Cross-company code txns.

    Can we transfer CO postings from one company code to another company code using cross-company transactions method.
    Thanks,
    Shalini.

    CO postings are in Controlling Area and not under company codes. Company codes are organizational units in FI, while Controlling has Controlling Area and Cost Centers.
    Further the CO postings come from FI transactions. If you make any inter-company transactions, they will be accordingly reflected in CO area, through the assignments.

  • Cross company code txn

    Hi,
    I have to create a report on cross company code transactions, can any one let me know how to do this?
    I have never worked on cross company code transactions can any one explain me about it.

    Dear Sultan,
    You can use report RFBVOR00 to display cross-company code transactions.
    Cross-Company code transactions:
    A cross-company code transaction involves two or more company codes in one business transaction. Examples:
    One company code makes purchases for other company codes (Central Procurement)
    a. One company code pays invoices for other company codes (Central Payment)
    b. One company code sells goods to other company codes
    A cross-company code transaction posts to accounts in several company codes. This cannot be done by posting only one document because a document is always assigned to exactly one company code. Instead, the system creates and posts a
    separate document in each company code involved. In order to balance debits and credits within these documents, the system generates automatic line items which are posted to clearing accounts, for payables or receivables.
    The documentswhich belong to one cross-company code transaction are linked by a common cross-company code transaction number.
    Hope the above information helps you to understand Cross - Company Code Transactions
    Regards,
    Mir

  • Derive profit center in cross company code transaction into clearing items

    Dears,
    I have one condition where I want to copy profit center from first line item to second line item in a cross company code transaction for example.
    I have two company codes XX10 and XX20
    two profit centers XX50 for company code XX10 and XX60 for company code XX20
    I am creating cross company code transaction. Now I want when giving XX50 for company code XX10 so upon creating cross company line items this profit center given in first line be copied automatically in the cross company code line item accordingly.
    example:
    Dr company code XX10 with profit center XX50
    Cr company code XX20 with profit center XX60
    Required:
    These profit centers be copied automatically in the cross company line items automatically. I am using same controlling area as the company code not cross company codes.

    Ya right , but when i am trying to post the enteries ,  the clearing item is having different profit center ( i.e which i have assigned in the t.code FAGL3KEH ), but  the vendor line item is still taking the dummy profit center.
    Vendor line item should actually take the profit center from the clearing line item ... but it it not taking ..
    Edited by: muscan S on Mar 3, 2010 6:48 AM

  • Questions on Inter-company and Cross-company sales ordering process..

    Hi,
    I understood the delivery plant and the sales org. is not in the same company code might be the process, but i want to know some details especially in SAP system how it is realized and processed, hope could kindly help me on below questions!! thanks!!
    1)what is the difference between inter-company sales and Cross-company sales??
    2)What is the general document flow and config. when in below 2 cases:
    Suppose the 2 company code under same sap client system, then what kinds of company code,plant config within the system for inter-compan and cross-company, and finally what kind of document flow will it be in the system.
    Suppose the 2 company code is under diff sap system, then what kind of doc flow in each sap system for inter-company and cross-company sales process???
    Thank you very much!!!!

    Hi,
    Basically there are totally Three types of scenarios
    1. Intra Compnay Stock Transport Order
    In this type of scenario, the stock is transfered between Two Plants which are under the same Compnay Code. The document type used here is UB. Here in this scenario the owner ship on the stock is not changed thats way there will not be any Invoice. The process as follows
    a. Create Purchase Order with document type UB - ME21N
    b. Create Replenishment Delivery with Document type NL - VL10B
    c. Picking and PGI - VL02N
    Now stock will be shown in Transit, you can check this using T.Code MB5T.
    d. Do MIGO to receive the stock into ordering plant.
    2. Inter Compnay Stock Transport Order
    This is called as Cross Compnay STO. Here the stock is sent from one plant to another plant which are in two different Compnay codes. That means the Ownership on the stock is changed in this scenario, that way there will be Intercompnay Invoice IV is reaised. Here the stock is just moved to one plant to another plant but not to any customer.
    The Process is as follows
    a. Create a PO using type NB - ME21N
    b. Create a Cross Compnay Replenishment delivery using type NLCC - VL10B
    c. Picking and PGI in VL02N
    d. Inter Compnay Invoice IV is raised by Supplying Compnay code to the Ordering Compnay Code - VF01
        for this a customer created in Supplying Compnay who represents the Ordering Compnay and the invoice is raised against to that customer.
    e. MIGO to receive the stock in Ordering Plant
    f. MIRO to do invoice verification and do Vendor account update. This also can be done by EDI triggering, to update the Vendor Account. That means with this step, ordering compnay will update into its vendor account that he has to give certain amount to the compnay who supplied the stock.
    3. Inter Compnay Customer Sales
    This is similer to the 2 process, but here instead of sending to Plant we will send the stock directly to Customer of other compnay code.
    The process is as follows
    a. Customer raises  normal sales order in another compnay code of type OR - VA01
    b. But if the plant of that compnay does not have stock, then in the order the plant is changed to other compnay code plant.
    c. Delivery is created in supplying Compnay against this Order - VL01
    d. Picking and PGI is done - VL02N
    e. But the stock is sent direclty to customer from supplying plant.
    f. Ordering compnay will raise normal invoice F2 to the customer
    g. Supplying Compnay will raise Intercompnay invoice IV to the Ordering Compnay.
    But for all these process there are some configurations can be done, like
    the material should be extended to both the plants
    a customer is created in supplying plant who represents the ordering plant so that IV can be generated to that customer.
    Supplying Plants should be linked to ordering Sales Org and Distribution channel. etc.
    Hope this is clear.
    Thanks
    Praveen

  • Cross Company Purchase / Sales Header Condition Posting to AP

    Hi All Expert,
    I don't know whether it is SD question or not,
    My company already config Cross-Company Purchase, for STO Purchase Order, and create DN using VL10b.
    Once create Invoice using VF01, it will generate AR and AP invoice using the EDI.
    The question is, now I want to add a surcharge to the AR and AP invoice.
    It is the percentage of the total amount base on the Material type, so I've add a condition table using VK11.
    Its work fine from retrieve the percentage and calculate the surcharge amount.
    I've also config the Account Key and generate the AR document successfully.
    However, I've no idea how to add the surcharge in the AP invoice side....
    I think it need to config the EDI.. but I cannot find the Account Assignment for the surcharge.
    Please give more information how to implement the surcharge.
    Thanks.
    Terry

    I've done it by another method.

  • Cross company unique material codes

    Hi all,
    Three years ago we implemented SAP R/3 for our five companies which belong to same group of companies. Therefore these company codes are on the same client. Recently we have implemented a new company code on the same client which is responsible for export  activities. This new company code buys goods from other company codes of the group and sells goods to export customers. We have been told by SAP consultants that we can use intercompany and cross company functions to operate these processes. The problem is, we have not planned these functions before, therefore the material codes are different in every company code. We have been told that material codes must be unique in every company code to process intercompany and cross company. Since we have five different company codes and thousands of materials, it is a huge work load for us to create these materials uniquely and delete older materials. What we would like to know is, is there any other way or method to operate cross company and intercompany processes even if the material codes are not unique?
    Best regards

    Hi Mertan,
    I dont think that is possible, for inter company or cross company the material should be unique but if you still want to do with different material name then I think you have to go for development. Discuss this issue with your technical consultant and ask him whether he is able to create a table in which one material is assigned with different name  and assigned it with one unique name. So when you will do the intercompany then system will check that table and identify the material.
    Hope it helps,
    Regards,
    MT
    Edited by: M T on Apr 22, 2010 1:49 PM

  • Payment term is not being pickedup in cross company code transaction

    Dear Friends,
    In one of the cross company code transaction scenarios (MIRO), We post a invoice in HQ books to bill on outside vendor. In subsidiary books one more cross company code document will get generated automatically, as billing on HQ as a vendor. In that second document, payment term is not being pickedup.
    eg., A is HQ and B is subsidiary company
    I post invoice in A books as B account debit and outside vendor credit.
    In B books one more entry will get generated automatically as GRIR account debit and A (defined as vendor in B books) account credit.
    In B Books payment terms are maintained in vendor master record (A vendor).
    But still the payment terms are not being pickedup in that document. Because of this, it is taking the document date itself as net due date.
    Please suggest, how to proceed to pick some payment term in that document.
    Regards
    Suresh

    Hi
    Assign the payment terms in Purchase Organisation level in Vendor Master Record.
    Regards
    Shammi

  • Posting using cross company code transaction must be blocked

    Hello Guys,
    I have a  problem related to cross company code transaction.
    In the OBA7 I have the document type KE that not allows posting using cross company code transactions. In the moment that I am creating a new document through the FB01, I have an error as "Consolidated companies US52 and ' ' are different
    Message no. F5080. As a results, the document cannot be created by this way. This is the correct process.
    But I have several documents that was used the doc type KE and the cross company code transaction was used. This is my issue. I don´t know why these documents were posted. The document come from another interface via IDOC and the IDOC not errored out.
    Can anyone help on this?
    Thanks
    Rafael B.

    Hello, I´ve checked the log and no changes since 2008.
    The document was created in 2010.
    This is the message: "No logs found for the selected period"
    More suggestions?
    Regards.
    Rafael

Maybe you are looking for