Delete Constraint is displayed but record is still removed from the VO

Scenario (ADF UIX Struts):
I select a record in my table and then the delete button. In the Entity Object's doDML method I catch the database foreign key constraint violation and throw a new JboException with a user friendly message to display on my page. The selected record is not deleted from the database which is correct but the record is removed from the ViewObject. Is there anything I can do to retain the record in the ViewObject?
Thanks in advance.

Sir Churchill, I tried deleting one of the playlists from my computer (Playlist 130). The next day I checked my wife's computer and noticed that Playlist 130 was now missing from her computer as well. Is there a way that I can delete a playlist from my computer without it disappearing from hers as well?

Similar Messages

So i cant download itunes cuz of some patenting control on the computer and i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

so i cant download itunes cuz of some patenting control on the computer and i needed to restore it . so went on icloud (find my phone,ipod etc) and restored it and my ipod is not turning on but ist is still buffering from the past 10 mins

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Every time I open my email on my iPad, I'm asked to enter the password for my old address. I have deleted that account, but I'm still asked for the password. What to do?

Every time I open my email on my iPad, I'm asked to enter the password for my old address. I have deleted that account, but I'm still asked for the password. What to do?

You cannot change your Apple ID. You can get a new one if you want, but all of your Apps and media are linked to yoru old Apple ID. And no, Apple won't transfer your old ID purchases to yoru new ID.

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening

I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"

If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

After update to Snow Leopard, I can no longer print from my Mac Book using my HP D110 but can still print from the web

Hello -
Earlier this week, I updated my Mac Book to Snow Leopard and am now having printing problems. I have an HP Photosmart D110. I have downloaded and installed the driver update. I have deleted and re-installed the printer. I have run the wireless network test (everything passed). I configured th settings on the HP EPrint website. I have shut down and re-started the computer several times. I checked for software updates.
The printer is *recognized* on the Mac Book, iPhone and the iPad. It shows up under the SysPref menu. I have been able to print coupons from the Coupons.com app using the iPhone and iPad, but I can't print from the computer itself. The printer icon opens and it indicates the document was sent but nothing comes out. I'm not sure what I'm missing?!

http://support.apple.com/kb/DL907
Also try powering the printer off for about 10 minutes.

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

My App Store is connected to another account. I've tried to alter all my settings through iTunes, The App Store on both the phone and my Mac but it is still connected to the original owner's apple ID. Is there something I can do?

Turn off Find My iPhone in iCloud on the iDevice.
Log out of iMessage, Facetime, remove Apple ID from iTunes & App Store.
Use Settings > Reset > Erase All Content and Settings.
Then set it up as a new iPhone with your own Apple ID.

List used to add permissions to InfoPath form updated, but people removed from the list still getting permissions.

I have a list that gives users Contribute permission to an InfoPath form during a workflow action. This list has changed, and I have added and removed users from it. The people who I've added are getting permissions, but the people I removed are STILL getting
permissions, even though they are nowhere on the list. What could be happening? I would greatly appreciate any help!
Thank you,
-Lyssa Prince

I must not be explaining this very well, and I apologize for that.
These are time sheets we're working with, so each user needs a certain set of people to approve and review his/her time sheets. The workflow we have running on each time sheet created reads which department the user is in, matches them with the row that
contains the field "department" that matches their department, and gives permission to all of the users in the remaining fields TS Approvers and TS Reviewers. If I update these fields at all, the new users in these fields get permissions for that department's
time sheets, but the people I removed from these fields do not stop getting permissions. It's as if there is a cached copy of the list which is being used by the workflow to assign permissions. This list will fluctuate, so it is not a viable solution to keep
running powershell scripts to remove people from each of these items after they have been removed from the list.

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

On Pages 09. Error Message "Missing Font" - text on all my files/Documents has disappeared. I know it is still there from the word count - but it is invisible. Any clues Gratefully received.

What version of Pages '09?
Have you updated it to the latest iWork '09 v4.3?
Peter

I have just bought an apleTV. I can't find the mirroring button on my toolbar, however I can mirror using Itunes, I have searched in systempreferences - Displays but it won't show me the Device. I have already tried restarting all. What am I doing wrong?

I have just bought an appleTV. I can't find the mirroring button on my toolbar, however I can mirror using Itunes, I have searched in systempreferences -> Displays but it won't show me the Device. I have already tried restarting the router, appleTv and Imac. What am I doing wrong?

A supported Mac
AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring::
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013)
Which Mac do I have?
How to identify your MacBook Air
How to identify MacBook Pro models
How to identify iMac models
How to identify Mac mini models

I did the ios7 updated but my setting still give me the red sign of update and when i check for update it shown ur iphone is updated

I did the ios7 updated but my setting still give me the red sign of update and when i check for update it shown ur iphone is updated

If you are a Windows user, try temporarily disabling your antivirus and any other anti-whatever that is required with Windows before beginning the process again.

My iMac 27inch screen keeps going black but everything is still running in the background? please help

My iMac 27inch screen keeps going black but everything is still running in the background? please help. I have read that apple are recalling 27inch iMacs....

Hello @DesCherryBomb,
I understand that you are having issues with your HP 2310m monitor going blank and/or flickering. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HT3678 I installed qucktime pro 7 but my movies still open in the old quicktime. ANy ideas?

I installed qucktime pro 7 but my movies still open in the old quicktime. ANy ideas?

Thanks for the idea, I tried it, but there is no "open with" pane.
I opened a qucktime file, hit cmd-i and what comes up is :
Source:
Format:
FPS:
Data size:
Data Rate::
Current Size:

Delete Constraint is displayed but record is still removed from the VO

Similar Messages

Maybe you are looking for