Delete dialog instance in rz20
Hello,
the dialog instances where automatically collected and monitor thru the central instance. Now I create a new dialog instanz and shut down an old one, but in the solution manager rz20 the old one already exist.
How can I delete the old and shut downed dialog instance?
Thanks
That doesn't work.
option 2 -> only a few minutes later the instance exist again under the MTE of the Solution Manager
try option 3 -> bad idea -> all nodes under all systems are deleted -> really scary but after a refresh they are already there
-> no solution
Similar Messages
-
How to delete Dialog instance on NW04
Hi guys
I have an installation NW04 on Cluster MSCS:
Central Instance on node A
SCS instance on Cluster Disk
Dialog instance on node B
We have performed upgrade to NW04s, and now in postprocessin we should deinstall Dialog Instance and install it again with software NW04s.
Here documentation guide:
****************************************+
After the upgrade of the central instance, you need to upgrade the dialog instance to the new release.
Due to the fact that some special settings and binaries on a dialog instance cannot be upgraded
remotely, you can only upgrade a dialog instance by uninstalling the old instance and then installing
a new dialog instance with the tool SAPinst.
Procedure
1. Uninstall the old dialog instances as described in the document Installation Guide ‒ SAP Web Application
Server 6.40 Java on <Operating System>: <Database>, Part II Installation and Post-Installation.
2. Install the new dialog instances as described in the document Installation Guide ‒ <SAP NetWeaver /
SAP application> <Technology> on <Operating System>: <Database>.
Point 1, is :
*************+
1. Log on as a user with domain administration rights.
2. Choose Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs.
3. The Add/Remove Programs dialog box appears.
4. Find the SAP entries.
. Note
Each SAP instance that is installed on the computer is listed with an entry like SAP Application Server
for System <SAPSID> instance.
5. Choose Remove.
The SAP Uninstall Wizard starts.
6. In the Welcome window, choose Next.
The dialog box Uninstalling SAP System appears for you to select an uninstall method
Depending on your selection, note the following when you use the check box to delete an SAP instance:
-- If your check box is marked gray, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example:
SAP<SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
-- If your check box is marked black, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example, SAP <SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
Local and domain user accounts
If you have different SAP instances that use the same <SAPSID>, you can delete the instance
directory only.
The wizard informs you when the SAP system or selected instances have been deleted successfully
But in my node B there is no SAP entry on Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs, however Dialog Instance exists, and windows service exists...and so on...
So how can we deinstall this dialog instance???
Thanks and regards
JavierHi
In node A there is JC30 (Java central instance)
In node B there is J32 (Java Dialog instance)
SCS31 (Services Central Instance) is now in node A, but can be switched.
Database Instance is OUTSIDE, is located on a Unix Server. (is not affected in this case)
Looking node B, there is no entry on Adding/Removing Programs regarding to SAP instance.
Of course, I can see windows services on node B, one for J32, other for SAPoscol, and one more for SCS31.
Any idea?
Thanks
Javier -
SAP Dialog Instance Installation.
Hi
Installation of ABAP System ECC6.0
I am trying to install another application server(Dialog Instance) on
different host. My both System Central(main server) and Dialog system in
same domain. I am installing SAP Server as a Local Installation.
I am able to installed Dialog Instance on same Host of Central System. But
when I was trying to installation it on different Host, I got error on
u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
Instance.
Can you please tell me the Prerequisite for this type of setup as well as
any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
side settings.
Following Error is occurred :
u201CCopy Errors detected.................: 0
Sync Errors detected.................: 0
Warnings detected....................: 0
INFO 2008-11-21 13:14:39
Execute step createOsCol of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:40
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(SAPOsCol).
INFO 2008-11-21 13:14:41
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove SAPOsCol" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:41
The 'SAPOsCol' service on the 'Local' machine was created successfully.
INFO 2008-11-21 13:14:45
The service 'SAPOsCol' started successfully on host 'Local'.
INFO 2008-11-21 13:14:46
Execute step createService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:14:46
Creating SAP start service of instance PT6/D02...
INFO 2008-11-21 13:14:47
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
INFO 2008-11-21 13:14:47
Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
logfile sapstartsrv.exe.log.
INFO 2008-11-21 13:14:53
Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
code 0. Output:
Service succesfully installed.
INFO 2008-11-21 13:14:53
Execute step setServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO[E] 2008-11-21 13:14:58
FSL-01027 Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
INFO 2008-11-21 13:14:58
Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
| WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
| DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
INFO 2008-11-21 13:14:58
Execute step createCCMSService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:58
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(sapccmsr.02).
INFO 2008-11-21 13:14:59
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
sapccmsr.02 is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove sapccmsr.02" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:59
Execute step setCCMSServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:00
Execute step registerEventsDLL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step setICMBndPermissions of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step copyRFCExecSec of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:10
Copied file '
i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
'D:/usr/sap/PT6/D02/work'.
INFO 2008-11-21 13:15:11
Execute step callSetDB4PWD of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step unpackJ2EEINSTALL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step runBatchconfig of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step removeTempDirectory of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Execute step start of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Starting instance PT6/DVEBMGS00...
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Starting instance PT6/D02...
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:35
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
INFO 2008-11-21 13:15:35
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
INFO 2008-11-21 13:15:43
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:48
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
INFO 2008-11-21 13:15:48
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
INFO 2008-11-21 13:16:21
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
\startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
0. Output:
STARTSAP continues...
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:22
State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:24
State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
ERROR 2008-11-21 13:17:24
CJS-30105 Instance PT6/D02 reached state UNKNOWN after having state
STARTING. Giving up.
ERROR 2008-11-21 13:17:24
FCO-00011 The step start with step key
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
executed with status ERROR .
Thanks in advance.
Regards
ManojHi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
However, I'm installing additional SAP Application server to our existing one.
Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B). System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
But I would like to install the 2nd and 3rd SAP App server in a local host.
While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
This is the part of the sapinst log where the error starts:
PHASE 2009-01-28 08:39:29
Preparing DBMS-specific profile parameters
INFO 2009-01-28 08:39:30
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2009-01-28 08:39:31
Handle services
INFO 2009-01-28 08:39:32
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
INFO 2009-01-28 08:39:32
Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2009-01-28 08:39:35
Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
ERROR 2009-01-28 08:39:35
MOS-01011 'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
Please help me on this I can't successfully install another dialog instance to add to our existing one now.
Thank you and hoping for your reply.
Yours truly,
Josephine Dejolde -
SAP Dialog Instance is not Starting - DISPATCHER EMERGENCY SHUTDOWN
Hi All,
We are running on SAP ECC 6.0, Oracle 10, Windows 2003.
We have One Central Instance an Two Dialog Instances, we shutdown the SAP system ( Jun 10 15:56:18 2008 ) to do an OFFLINE backup, now one of the Dialog Instances is no starting, we try to restart the system on Wed Jun 11 02:05:45 2008
Oracle is Up and Open.
The Central Instance and one of the Dialog Instances are Up, so you can login on the SAP System, and execute SAP transactions.
I will Attach Our DEV_DISP, and DEV_W0 files:
dev_dip
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid MIS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 4008
Wed Jun 11 02:05:45 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 4008) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jun 11 02:05:50 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPREC2_MIS_02 <
DpShMCreate: sizeof(wp_adm) 37008 (1480)
DpShMCreate: sizeof(tm_adm) 56268128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm) 2208080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CCF0050, size: 59524432)
ERROR => DpShMCreate: ShmCreate SHM_DP_CA_KEY(rc=4) [dpxxca.c 181]
ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c 462]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jun 11 02:05:55 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 432]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=4008)
When : 6/11/2008 2:5:55.274
Threads : 2
Computer Name : SAPPREC2
User Name : SAPServiceMIS
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 11ec
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
0000000007d1f2e0 000000000041a395 0000000000000001 disp+work!DpVmcCheckDebugProxy [dpxxvmc.c (1211)]
0000000007d1f3d0 000000000041d007 0000000005561401 disp+work!DpHalt [dpxxdisp.c (10016)]
0000000007d1fc10 0000000000421a1b 0000000002671ab0 disp+work!DpFatalErr [dpxxdisp.c (17789)]
0000000007d1feb0 000000000042d570 0000000000000000 disp+work!DpSapEnvInit [dpxxdisp.c (1388)]
0000000007d1fee0 000000000040108d ffffffff00000002 disp+work!DpMain [dpxxdisp.c (1076)]
0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007d1ff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
State Dump for Thread Id 1194
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000ccefe40 0000000077d5f651 0000000007d7bc60 ntdll!NtFsControlFile
000000000ccefeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
000000000cceff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000cceff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000cceffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
call clean-up function ...
SigICallExitRoutine: call exithandler (DpHalt)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
DpShmPrfSwitch : State already set (OFF)
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
And our dev_w0
this file was no modifued since we stop SAP System.
M Tue Jun 10 15:56:18 2008
M *** WARNING => ThSndDelUser: delete client/user 020/RMENDOZA (T60) on server SAPPREC1_MIS_01
S
S Tue Jun 10 19:07:40 2008
S server @>SSRV:SAPPREC1_MIS_01@< appears or changes (state 3)
M
M Tue Jun 10 19:07:52 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080610 144648 SAPPRECDB
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000866D128,usrhp=0000000007D91058)
C Detaching from DB Server (con_hdl=0,svchp=000000000866D128,srvhp=0000000018D61918)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=29203, com_tx=3253)
B statistics db_con_rollback (roll_total=494, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2632) [dpnttool.c 327]
Please Some Tips!
Best Regards,
Erick ILarrazaHi Deepak,
Thanks a lot for your reply, in this case the problem was with the Dialog Instance (Only SAP apps, not Oracle).
We shutdown the instance with the Microsoft SAP Management Console (right button -> Stop).
In general to shutdown the SAP System we first:
1. Shutdown The Dialog Instance. (SAP Management Console)
2. Shutdown The Central Instance. (SAP Management Console)
3. Shutdown Oracle (BR*Tools).
4. Stop SAP and Oracle Services.
Maybe is more a problem of Windows Memory Management.....
Best Regards,
Erick ILarraza -
New Dialog Instance Installation PXA_NO_SHARED_MEMORY Error
Hi friends,
I am running SAP ECC 6.0 on HP_UX 11iv2 and oracle10g. Central instance and database installed on different servers.
I have two other dialog instances running but I have installed another dialog instance as restore from other existing dialoginstance.. I have completed the restore activity and changess in profiles and aal that.
but when I start this dialog instance then it giving large no.of dumps as PXA_NO_SHARED_MEMORY.
Short text
1200000 kilo bytes of shared memory for PXA not available.
What happened?
When starting the R/3 System, 1200000 Kbytes of storage space
was required for the ABAP/4 program buffer (PXA), but this
was not available.
The system was started as an emergency system and is not fully
operational.
It is intended only for display and to eliminate errors.
Under no circumstances should it be used for production
purposes.
What can you do?
The system was started as an emergency system and is not fully
operational. It is intended only for display to eliminate errors.
Under no circumstances should it be used for production
purposes.
used in production.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
. You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
The error probably occurred when installing the
R/3 system.
The return code of the SAP shared memory control was 1.
The error reported by the operating system is:
Error number..... 22
Error text....... "Invalid argument"
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Dispatcher jkeccap4_PDR_00 on host jkeccap4"
Version.............. 38
Error code........... "-2"
Error text........... "hostname 'jkeccap1.jktyre.com' unknown"
Description.......... "NiHsLGetNodeAddr: hostname cached as unknown"
System call.......... " "
Module............... "nixxhsl.cpp"
Line................. 223
The error reported by the operating system is:
Error number..... 22
Regards
Ganesh Datt Tiwari
09971538721Dear Markus,
Thanks for your valuable reply
Please find the below log
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 93380kb, dir_size: 23184kb.
I *** ERROR => shmget(10006,1228800000,2016) (22: Invalid argument)
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
(0) 0x4000000003c0bbd0 CTrcStack + 0x1b0 at dptstack.c:227 dw.sapPDR_D00
(1) 0x4000000004df9bd0 Z23rabaxCStackToTraceFilev + 0xb0 dw.sapPDR_D00
(2) 0x4000000004e0b450 Z10rabaxinitPKt + 0xbb0 dw.sapPDR_D00
(3) 0x4000000004e0c380 ab_rabax + 0x180 dw.sapPDR_D00
(4) 0x4000000003e3fcd0 Z9abpbinitv + 0x1db0 at abload3.c:1392 dw.sapPDR_D00
(5) 0x4000000003e27000 ab_init + 0x380 at abinit.c:238 dw.sapPDR_D00
(6) 0x40000000017406b0 ThrInitRunTime + 0x110 at thxxrun1.c:190 dw.sapPDR_D00
(7) 0x400000000168bb40 ThStartUp2 + 0x1e0 at thxxext.c:903 dw.sapPDR_D00
(8) 0x4000000002006740 ThInit + 0x1ca0 at thxxhead.c:1851 dw.sapPDR_D00
(9) 0x4000000002004580 ThStart + 0x2a0 at thxxhead.c:1144 dw.sapPDR_D00
(10) 0x40000000015a1160 DpMain + 0x5f0 at dpxxdisp.c:1128 dw.sapPDR_D00
(11) 0x4000000002cc08d0 nlsui_main + 0x30 dw.sapPDR_D00
(12) 0x4000000002cc0860 main + 0x60 dw.sapPDR_D00
(13) 0xc000000000033910 main_opd_entry + 0x50 /usr/lib/hpux64/dld.so
A
A Mon Sep 19 17:50:30 2011
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil)
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG failed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Mon Sep 19 17:50:30 2011
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/700_REL/src/krn/runt/abload3.c#42 $ SAP.
A Function ab_pbinit Line 1908.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_RETURN
A Shared Memory von 1200000 Kilo-Bytes für PXA nicht verfügbar..
A
A *** Allocation of PXA failed.
A *** Shared Memory in size 1200000K not available.
A *** Starting up system in emergency mode.
A *** Please don't use as productive system.
A *** Please decrease value of profile parameter
A *** abap/buffersize and restart the system.
A *** For further information please refer to note 307976.
A **GENER Trace switched on ***
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 3152kb, dir_size: 2964kb.
A PXA allocated (address 0xc000000036000000, size 32768K)
A System name
A ORACLE...........................PDR........20070605020637.....................................
A is used for RFC security.
A Sharedbuffer token: 53415040...33 (len: 111)====== a0605b23bdbb6b8b19adea8b...
A abap/pxa = **EMERGENCY_MODE** unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
B dbtran INFO (init_connection '' ORACLE:700.08):
B max_blocking_factor = 5, max_in_blocking_factor = 5,
B min_blocking_factor = 5, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / initialize RemObjDriver for ABAP Objects
A Hotpackage version: 21
M ThrCreateShObjects allocated 103928 bytes at 0xc00000000ff80000
M ThVBStartUp: restart pending update requests
M ThVBAutoStart: update-auto-delete
M ThVBAutoStart: update-auto-sys-start
M ThVBAutoStart: update-auto-v2-sys-start
N SsfSapSecin: putenv(SECUDIR=/usr/sap/PDR/D00/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/PDR/D00/exe/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700,
W ITS Plugin: Int.version,
W ITS Plugin: Feature set:
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >ciPDR_PDR_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 19.09.2011 03:14:35 1316382275 / 24286
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 19.09.2011 17:41:44 1316434304 / 16
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 19.09.2011 17:50:31 1316434831 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter SSRV:jkeccap4_PDR_00@< appears or changes (state 1)
A
A Mon Sep 19 17:50:52 2011
A **GENER Trace switched off ***
A -
Short Dump DATA_OFFSET_TOO_LARGE in dialog instance
Hi,
We recently install a Dialog Instance for our production system (ECC 5.0), and we received the Short Dump DATA_OFFSET_TOO_LARGE only in our Dialog Instance, in our Central Instance the error does not occur. This is the error:
Runtime Error DATA_OFFSET_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
Date and Time 30.03.2007 08:19:13
ShrtText
Invalid partial field access: Offset too large
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSNR3" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
is especially useful if you want to keep a particular message.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_RANGE_OUT_OF_BOUNDS', was neither caught nor passed along using a RAISING clause, in the procedure "NUMBER_GET_NEXT" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception to occur, the running program was terminated.
The reason for the exception is:
The system tried to access field "Z_DB_GROUP_KEY" with type "C" and length 20 in the current program "SAPLSNR3" using offset 20.
Partial field access is not allowed with an offset specification that is larger than actual field length.
How to correct the error
Make the offset smaller with which you want to access the field.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
"DATA_OFFSET_TOO_LARGE" CX_SY_RANGE_OUT_OF_BOUNDSC
"SAPLSNR3" or "LSNR3U01"
"NUMBER_GET_NEXT"
User and Transaction
Client.............. 300
User................ 645
Language key........ "S"
Transaction......... "FNV5 "
Program............. "SAPLSNR3"
Screen.............. "SAPLFVDA 0400"
Screen line......... 323
Information on where terminated
The termination occurred in the ABAP program "SAPLSNR3" in "NUMBER_GET_NEXT".
The main program was "SAPMF67A ".
The termination occurred in line 99 of the source code of the (Include)program "LSNR3U01"
of the source code of program "LSNR3U01" (when calling the editor 990).
Error occurred during batch input processing
Processing was terminated because the exception "CX_SY_RANGE_OUT_OF_BOUNDS" occurred in the procedure "NUMBER_GET_NEXT" "(FUNCTION)" but was not handled locally, not declared in the RAISING clause of the procedure.
The procedure is in the program "SAPLSNR3 ". Its source code starts in line 5
of the (Include) program "LSNR3$01 ".
Our Database is DB2 UDB with FixPak 10, the Central Instance is on Solaris 9 and our Dialog Instance is on Linux Red Hat. Both instances have the same Kernel release (155) installed.
Can you help me please?
Best Regards,
Eduardo Perez.Hi Eduardo,
Just refresh the number range buffers in both instances and see what happens.
Go to SM56. From menu bar choose number range buffer. Choose client as as current client. Check the checkbox global reset. press enter.
There is one more thing you can check before buffer refresh. Look out for the number range object being used.
Then check it in SNRO txn. There you will find the transaction for maintaining the number range object intervals. GO to that transaction in both the instances and display the intervals. You will find discprency between the two instances.Though it is not very critical in case ur not able to find the number range object.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu -
Dialog Instances Java are not up after System Copy NW2004s SR2 ABAP+JAVA
Hello guys,
I have just performed a system copy of our BW system (douple stack NW2004s) wich consists from CI and 2 DIs. First I made an export using SAPINST (Software from SAP_BUSINESS_SUITE_2005_SR2 for sparc solaris), where I choosed in SAP Installation Master->SAp Netweaver 2004s Support Release 2->Additional Software Life-cycle Tasks->System Copy->Oracle->Source System->Central System->Based on ABAP and Java->Database and Central Instance Export. I couldn't find any special task for export java from my dialog instances, so I thought it would be ok like that. Then I used the same software on my target system, choosed ...Additional Software Life-cycle Tasks->System Copy->Oracle->Target System->Central System->Based on ABAP and Java->Central System Installation. In the Dialog input phase of SAPINST I indicated that use db specific tools to copy your database. So I made the database restore+recovery with our DB tools and continued withthe SAPINST and Import.
Afterwards the ABAP part and Java on the central Instance run perfect, but Java Stack is not up by both of Dialog Instances. I have checked the configtool on the server where the CI is running (the DIs are running on different linux servers) and couldn't see any entries for my dialog instances, only the CI was seable there. I tried to start configtool from the application server, but there I could find only the file config.properties in the directory /usr/sap/<SID>/.../j2ee/configtool/, others were simply not there, so it was impossible to start it. Have i forgotten something by EXPORT/IMPORT or I should just use other software for coping a System with douple stack on a CI and DIs? Or should I get configtools for Linux platform ( have searched but not found yet) and try to make the same changes wich i have done by the CI before i started Java on the CI? The most irritated point is that i can't see the dialog instanes in Configtool from the CI.
Any other suggestions and good advices?
Thanks a lot in advance.
Regards, PolinaHi Manoj, </p>
I have founded following information in the work directory of one of my dialog instances ( where the java stack doesn't want to start after the copy): /usr/sap/SID/instance/work/ <br>
1) std_server0.out is in the condition before the system copy, no new data was written there. <br>
2)dev_disp <br>
DpJ2eeStart: j2ee state = STARTED<br>
DpJ2eeLogin: j2ee state = CONNECTED<br>
Fri Feb 26 12:58:04 2010<br>
ERROR => DpJ2eeMsgProcess: NiRead failed (NIECONN_BROKEN) [dpxxj2ee.c 1212]<br>
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)<p>
Fri Feb 26 12:58:20 2010<br>
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN<br>
Fri Feb 26 12:57:20 2010<br>
***LOG Q0I=> NiIBindSocket: could not delete file '/tmp/.sapstream64984' for hdl 2: unlink (1: Operation not permitted) [nixxi.cpp 3207]<br>
ERROR => NiIBindSocket: could not delete file '/tmp/.sapstream64984' (hdl 2; errno=0) [nixxi.cpp 3214]<br>
WARNING => NiIBind: Could not bind local domain socket, only listening on internet socket [nixxi.cpp 3491]<p>
It seems that java is trying to start but something goes wrong and it have to shut down<p>
3)dev_bootstrap<br>
[Thr 1086335296] JLaunchIExitJava: exit hook is called (rc = 66)<br>
[Thr 1086335296] **********************************************************************<br>
ERROR => The Java VM terminated with a non-zero exit code.<br>
Please see SAP Note 943602 , section 'J2EE Engine exit codes'<br>
for additional information and trouble shooting.<br>
**********************************************************************<br>
[Thr 1086335296] SigISetIgnoreAction : SIG_IGN for signal 17<br>
[Thr 1086335296] JLaunchCloseProgram: good bye (exitcode = 66)<p>
4) jvm_bootstrap.out<br>
...<br>
Exception occurred:<br>
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID264509300" does not exist.
..<br>
Exception occurred:<br>
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!<br>
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)<br>
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)<br>
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID264509300) in the database! Check database consistency or local Bootstrap properties!<br>
[Bootstrap module]> Problem occurred while performing synchronization.<p>
j2ee/instance_id = ID2645093 <--- that is the ID of those DI where i took these traces from. So it seems that this ID is not in the database at all. Probably the infromation about the java stack of my DIs was not exported at all...<p>
Thanks in advance. <br>
Regards, <br>
Polina -
How to Uninstall Java Dialog Instance
Does anyone know how to uninstall a Java Dialog instance?
The install instructions, 'SAP Web Application Server 6.40 SR1 Java on Windows: MS SQL Server' suggest that I should go to the control panel and select the add/remove program and then find the instance and remove it. However, the instance does not appear in the list.
Note: I have the ABAP stack (DEV) and the java stack (JDV) installed on the same box. But, the java stack is not an add-in. The ABAP stack instance does appear in the add/remove program list.ok Doug,
i've a workaround for that.
Go to registry editor.IF YOU Find the Service corresponding to J03(SAP<SID>_03). Delete it. (if you want to be fail safe, export that contents to a file using FILE --> EXPORT and then delete it. you may import it later if you want). and RESTART the PC.
this process will ensure that there is no instance according to your system (coz no registry entry is found). it is as good as removed. but the files that were created during the instance installation will remain in your hard drive.
IN CASE you need this instance later or this workaround gives you any trouble, just import the registry contents file which you have exported earlier and RESTART THE PC.
it is as good as it was!!!
this is an easy work around but slightly risky as u are fiddling with your SYSTEM REGISTRY ENTRIES.
Regards
Arun.
PS: Remove the corresponding entry in the WINDOWS SERVICES file. otherwise, it will give PORT IN USE during later installation with instance number 03.
Message was edited by: Arunkumar -
Uninstall J2ee Dialog instance on UNIX environment
HI Everyone,
I am trying to uninstall J2ee Engingine Dialog instance. I saw the procedure on the install document and it talks about deleting the files manually and also i have this not 871523 which says removing dialog instance from database after uninstallation.
I am searching for unistall tool. uninstsap script in Unix. Can someone guide me where i can find it. I am using Was 640 sp 12. Thanks for your help in advance.
Regards
HarishYou should have an Unix user for each version Why do you mean that?
You can have all oracle home with the same user.
$ id -Gn
dba ...
$ export ORACLE_HOME=/u01/app/oracle/product/7.3.4.0
$ export ORACLE_SID=DB1
$ svrmgrl
connect internal
startup$ export ORACLE_HOME=/u01/app/oracle/product/8-9-10
$ export ORACLE_SID=DB2
$ sqlplus "/ as sysdba"
startup$ -
Hi gurus,
Can anyone tell me is it possible to just uninstall a dialog instance in the MSCS node?
regards
Chew LinHi,
Not supported by SAP, not recommended by SAP.
But I did it without problem at home on my test drive
If you have enough experience you can try, if not work you can reinstall it
1. Shut down SAP sytem
2. addapt all profiles start form DEFAULT then START and also instance Profile
3. check /etc/services and add new entries
e.g. sapdp 3200/tcp
new
sapdp 3201/tcp
you can leave the old one , not need to delete them
4. rename all profiles Start and stop
stopsap_<HOST>_00 to stopsap_<HOST>_01
5. adapt enviroment for your user sidadm
corn shell, bourn shell,
6. if you manage to start your system then
RFC - sm59, rz10 - import new profile, SPAD, job managment SM36 and Sm37
Of course I miss something, but it up to you
For you better knowledge you can try it, it will learn you how system works
or simple ask for consulting support from SAP, it will cost just money, nothing else.
Best regards,
Peter Nechala -
How to stop dialog instance without impact in the processes?
Hi experts,
I want stop and after delete my dialog instance.
My steps are:
- Stop de dialog instance
- Check the smlg and rz04 that the dialog instance disappear.
But, some jobs and some process type dialog, try to connect to my dialog instance stopped, why?
Thanks in advance,
Regards,Hi,
In trx sm61 i have the server of dialog instance.
What type of logs do you need? I have the logs in sm21:
12:55:01 RD USER S0T NiConnect Unsuccessful, Return Code: -0010
12:55:01 RD USER S0R > Host: hermes
12:55:01 RD USER S0S > Service: sapgw10
12:55:01 DIA 04 100 USER R49 Error de comunicación, cód.retorno CPI-C=020, cód.retorno SAP=236
12:55:01 DIA 04 100 USER R64 > Función CPI-C: CMINIT(SAP)
12:55:09 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:14 RD USER2 S0T NiConnect Unsuccessful, Return Code: -0010
12:55:14 RD USER2 S0R > Host: hermes
12:55:14 RD USER2 S0S > Service: sapgw10
12:55:14 DIA 07 100 USER2 R49 Error de comunicación, cód.retorno CPI-C=020, cód.retorno SAP=236
12:55:14 DIA 07 100 USER2 R64 > Función CPI-C: CMINIT(SAP)
12:55:19 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:29 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:39 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
12:55:49 MS Q0U Cliente hermes_BLP_10 es desconocido para servidor de mensajes
Thanks in advance,
Regards, -
Installation of Application Server (Dialog Instance) R/3 4.6C
I am trying to install a Dialog instance for our test server and I am getting the following error
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
checking host name lookup for 'CFSAP4'
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
offical host name for 'CFSAP4' is 'CFSAP4.DAKAmericas.com'.
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
host 'CFSAP4' has ip address '10.16.6.123'
Info: DIALOGINSTANCE_NT_MSS SyCheckHostnameLookup 2 326
offical host name for '10.16.6.123' is 'cfsap4'.
Error: DIALOGINSTANCE_NT_MSS SubstituteVariables 2 326
The official name of hostname cfsap4 is CFSAP4. Please check your DNS configuration and insert an entry in etc\hosts.
Error: DIALOGINSTANCE_NT_MSS ColdKeyCheck 2 326
Phase failed.
Error: Main {} 2 326
Installation aborted.
I have checked the DNS setting and found some things, which I have deleted, but still this error, do I need to reboot or is their a some time which I have to wait for the DNS setting to take effect.
Thanks
Jagraj Dhillon
Message was edited by: Jagraj DhillonSAP Notes 83200 and 23538,
SAP treads hostnames case sensitive.
using \etc\hosts should be the last method to fix this because it will bypass DNS.
Example: Central instance corrects it's hostname using \etc\hosts - app-server uses DNS. this situation may result in different hostnames.
regards
Peter -
Problems in Dialog instance installation for ECC6.0(ABAP+JAVA)
Does anyone can help me what should be a procedure of installing Dialog instance for ECC 6.0 with both ABAP + Java Stacks.
When installing app server do we also choose ABAP and Java or just ABAP. Installation manual does not cover this and when we run the sapinst we have following problem:
<u>The following are the activities that I have done as pre-reqs on the standby on the server that is to host dialog instance</u>
I have mounted the following file systems on ddrsap02. Created the local filesystem /usr/sap/DSP/D00 and NFS mounted the others
/dev/appsaph 5505024 5503856 1% 5 1% /usr/sap/DSP/D00 <b>(is this required or SAPINST should create it itself)</b>
ddrsap00:/stage 419430400 149761708 65% 90835 1% /stage
dprsap01:/sapmnt/DSP 4718592 2888416 39% 12790 2% /sapmnt/DSP
ddrsap12:/usr/sap/trans 2752512 1084932 61% 5107 3% /usr/sap/trans
Then when I run the sapinst from ddrsap02 to install the DI I get the following error
ddrsap02[/tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI]#vi sapinst_dev.log
"sapinst_dev.log" 20516 lines, 641048 characters
TRACE
Running with toplevel file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/toplevel.xml
Running with dialog file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/dialog.xml
Running with keydb file /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI/keydb.xml
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaejs701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iacdlib701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iaccdlib.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_exe.397528.1170221882.
Opened iapasswdman701.o
INFO 2007-01-31 09:38:52
Working directory changed to /tmp/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAPJAVA/DI.
This is SAPinst, version 701, make variant 700_REL, build 817256
compiled on Mar 14 2006, 23:39:26
TRACE [syxxsyshlp.cpp:175]
syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
_ = /tmp/sapinst_exe.397528.1170221882/sapinstexe
SAPINST_EXE_DIR = /tmp/sapinst_exe.397528.1170221882
LANG = en_US
LOGIN = root
PATH = /usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14_64/jre/bin:/usr/java14_64/bin
SAPINST_EXEDIR_CD = /stage/51031797/IM_AIX_PPC64/.
LC__FASTMSG = true
WINDOWID = 8388621
"sapinst_dev.log" 20516 lines, 641048 characters
EJS_Installer::writeTraceToLogBook()
2007-01-31 09:42:48.898 NWDB.getDBHost() done: undefined
<i><b>ERROR 2007-01-31 09:42:48 [iaxxinscbk.cpp:271]
abortInstallation
CJS-00030 Assertion failed: in getSidFromProfiles: Variable dbHost should be defined</b></i>
TRACE [iaxxejsbas.hpp:388]
handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2007-01-31 09:42:48
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-01-31 09:42:48
FCO-00011 The step assertDBInfo with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|assertDBInfo was executed with status ERROR .
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > SAP Systems > Oracle > High-Availability System > Base
d on AS ABAP and AS Java > Dialog Instance</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button
to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>/tmp/sapinst_instdir/ERP/SYST
EM/ORA/HA/ABAPJAVA/DI</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Am I missing some pre-reqs or variable definitions?
I was going through the documentation and it says that /sapmnt/DSP/exe should be a local filesystem for a DI on a separate server. Will this create a problem ?
Also they talk about starting sapinst with the variable SAPINST_USE_HOSTNAME set to ddrsap02. I have tried this also
We are also not 100% sure about the settings for parameters:
rdisp/mssserv
rdisp/mssserv_internal
Accorss Devault Instance and Services Instance profile.
When we define it as per installation GUIDE (Abap+Java page 64) we get the popup message in SAPINST:
<b><html>Profile parameter <em>rdisp/msserv_internal</em> is not set for instance DVEBMGS01/DSP on host dprsap01.<p>You have to set the parameter in the default profile and restart the instance.<p>For further information refer to SAP Note 821875.</html></b>
Other errors follow shortly.
Any help would be appreciatedHi ,
are you able to resolve this error :Profile parameter rdisp/msserv_internal is not set for instance DVEBMGS01/DSP on host dprsap01.
You have to set the parameter in the default profile and restart the instance.
For further information refer to SAP Note 821875.</html>
? if yes , pls let me know , I am stuck with same issue while installing dialog instance .
Thanks
Hamendra -
BI : dialog instance does not start
Hi all.
--> Before explain you our problem, I'm going to tell you our scenario: We have an HP-UX cluster where we have installed BI system ABAP+JAVA stack (NW 701). We have got one central package with SAP and oracle in node1 and one dialog instance in node2.
--> When we start the cluster, central instance starts succesfully and all works fine. But at the moment we start dialog one in second node, for this instance only starts ABAP stack, but not java one. All logs shows a clear error, and it is that not connect to database. But at the same time, in central instance we are not able to start configtool because not connection to database. It's strange because in all nodes, processes are running. Just at the moment we stop dialog instance, central one works fine again and configtool access is succesfully.
Lot of bootstrap logs appear, so we are thinking that some parameters are wrong in configtool, but we are not so sure.
Can anybody help us with this issue? What can be causing that database connection is lost when starting dialog instance?
Thanks a lot to all in advance.
Best regardsHi,
which way you apply kernel patch on application server for iseries?
use following method to apply kernel patch on application server for iseries.
stop application server.
download the kernel sapexe.sar and saexedb.sar application server on windows for iseries.
extract both file in one folder. i.e kernel
also download patch for IGS i.e igs.sar
and extract it in same folder. i.e kernel
now
backup NTI386 folder on iSeries host.
\usr\sap\SID\SYS\exe\uc\NTI386
now copy the content of extracted kernel from folder kernel to NTI386 folder.
now start the application server host.
consider following to install application server for iseries on windows server.
if you use a 64 bit windows server, please have look to Note 734428:
This Application Server (64 bit) is available for EM64T/AMD64 technologies and NOT for Itanium
also check Note 680617 - INST: Appl.Server in Heterogeneous SAP System Environment
regards,
kaushal
Edited by: kaushal malavia on Apr 1, 2008 10:16 AM -
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat
Maybe you are looking for
-
[Solved] Suggested clarification for "Forum etiquette-respect distros"
I bumped into this while reading one of the binned posts today, and took a second to parse it properly: Maligning other GNU/Linux distributions, operating systems, or users thereof is prohibited. May I suggest a small edit for clarity: Maligning othe
-
HELP!!! Can't get calls or texts or face time on my iphone 4!!
It started 2 days ago. I cant receive any texts or calls. I can make calls but no one gets my texts. Also, I just tried turning on face time and it just keeps saying "waiting for authorization." I've tried everything on the apple tech support page an
-
IPhoto 9.4.1 Won't Stop crashing
Starting today iPhoto began crashing as soon as I opened it. I updated my OS and iPhoto to make sure that wasn't the issue and it keeps happening. I've posted the first 50 lines of the crash report below. Please help. Process: iPhoto [4262] P
-
can anyone tell me how to compare 2 dates? i have today's date and the delivery date of stock. the delivery date has to be equal to greater than today's date. if it is less than today's date, then the program must show an error while saving the progr
-
Speicherproblem bei Raw Converter im CS6
Ich habe gestern meinen Photoshop CS6 auf die neueste Version 13.0.1 x 32 und auch den RAW Converter auf die neue Version 9.0.0.414 aktualisiert. Seitdem habe ich das Problem, dass ich lediglich noch ein einziges bearbeitetes RAW Bild als jpg abspeic