Delete document in a project that was created by copying from the Solution

Here is our scenario:
We have a Solution linked to a Maintenance project.
Additionally I have an Implementation project that I pulled Scenarios from the Solution as a starting point (ie. SD). I used the COPY documents option.
Now, I would like to delete a document from the Implementation project and I cannot because the attached error message.
What is the standard process for something like this? Any suggestions.
Can;t find the attachment option: ERROR: the document is still in use and cannot be deleted.
When I click the Where_used is see the SOLUTION, the Maintenance project and the Implementation Project

Hi Kelly,
Firstly, try deleting the assignment in the implementation project by using the button with a "minus" icon. Then in the maintenance project you try the deletion. If it stil doesn't allow you to delete it. Try deleting all the assignments and afterwards you may try to use the report solman_unused_documents to find the documents without any assignment and locate this to delete.
Please read the wiki page for documents in solar01 and solar02. It may help you to better understand my recommendation.
- http://wiki.sdn.sap.com/wiki/x/rBoMDg
kind regards, Fabricius

Similar Messages

How do I delete a Thunderbird. zip file that was created by recuvva?

My Dell computer is over 10 years old and getting ready to be recycled. I have used Thunderbird since 2011 and the issue is a concern to an otherwise outstanding program.
The file recover program RECUVVA created a file of all deleted Thunderbird emails called Thunderbird.ZIP. I have tried several software programs to delete the file (AVG, ERASER, Glary) and none will delete the Thunderbird.ZIP file file.
The file has migrated from the Dell computer to other computers and external drives. I loaded a copy of Thunderbird.ZIP file on a small USB drive and the only way to delete this file was to overwrite the USB drive and then reformat it. I really do not want to reformat several hard drives to remove the Thunderbird.ZIP file.

If you want to get rid of the computer.
If the Recuva file cannot be deleted until it has been used to recover, then use it to empty it.
Then uninstall Recuva to stop using it.
Then delete emails you do not want, empty the Deleted and Junk folder and then compact all folders.
Then if you want to migrate whole profile to another pc - make a backup file of Profile.
If you uninstall Thunderbird, it will uninstall the Thunderbird Program, but it may not have removed your Thunderbird Profile containing emails etc.
Make sure this has been fully deleted.
http://kb.mozillazine.org/Profile_folder_-_Thunderbird
If recycling/ selling/trashing the pc, I would recommend that you get everything you require off that pc and then reformat the hardrive.

How do I delete an iCloud email address that was created under my Apple ID?

I have an Apple ID that is used mostly for iTunes. My son has an iPod Touch and wanted to create an iCloud email address to use on his iPod. We created an iCloud email address through my Apple ID, not realizing that now, every time he sends an email, it arrives "from" my name, not his, as the address is attached to my Apple ID and therefore through my account information. We would like to delete his iCloud email address completely so he can open his own personal Apple ID and recreate his iCloud email address through his own new Apple account. We deleted the account from his iPod and also deleted it as a second email address on my AppleID account information. Yet, despite all this, the email address seems to remain attached to my account. Apple Support website and iCloud support did not give us any ideas. Help!

PS:
since I posted this question (above), I have read many other questions posted and it seems I am not alone. Seems Apple will not allow people to delete an iCloud email address completely from existence! You can delete it from devices but not from the Apple ID account. What a disappointment, really. In my opinion, the "user-friendly" Apple is really frustrating people who simply want to be able to manage their email addresses for various, valid reasons. Email addresses that have been created should be allowed to be deleted by the creator! Other email services allow this!
One idea I have that may help others in my situation: Rather than delete my son's iCloud email address from my Apple ID account, so that his emails come from HIS name not MINE, I might try to just change the name on my AppleID account from mine to his. He can create a new password too. Then, in the future, if I want to recreate my own Apple ID, I will.

How can I get an SD version of a movie that was a digital copy from a Blu-Ray purchase?

I have several Disney Blu-Rays that came with digital copies. I followed the instructions for linking a Disney Movies Anywhere account with iTunes, and redeemed the codes. The movies show up on my "Purchased" page in iTunes, but only as an HD version. In iTunes, I specified that my iPad Mini should prefer the SD version, and then synched these movies. Based on the reduction in space available, the full HD versions were synched, not the SD versions. I'd rather save the space and get the SD version on the iPad Mini. How can I accomplish this?

If those films are only in HD in the store then you will only be able to get the HD versions - what options do the films have against them in the store (HD only, HD and SD ?), and (if the SD version is in the store) if you go to the Purchased link Quick Links on the right-had side of the iTunes store homepage on your computer's iTunes do you get the option of downloading an SD version of them ?
The 'sync SD' version setting only works if you have the SD and HD versions in your iTunes library, if you don't then it will only sync what you have i.e. the HD version.

How can i use a code for an app in venezuela that was sent to me from the states?

Please my cousin sent me an app as a gift but when i try to download it pops a message that says that my code will work just for store in the us, does anybody knows how change that code or any other way to use it here in Venezuela? thanks a lot

As stated, that code will only work in the US App Store. Ask your cousin to contact iTunes support, explain your situation and see if they can issue him a code that will work in the Venezuela store.
http://www.apple.com/support/contact/

Picture is cropped when burning an idvd project that was created in imovie

Good Evening! I am a new Mac user and finding it fun to work in imovie. However, I am running into a problem and looking for advice on how to fix it. I uploaded some pics from my camera and created a great 4 minute video in imovie with music, transitions, etc. I created it with standard settings and shared with multimedia Large, then added it into an idvd project. The problem is when i burn the dvd and play it on my dvd player the pictures are zoomed in a little. Let me give you an example..the very first slide is a group picture and underneath is the caption "circle of friends"...on the tv..the two people on the ends are not visible and the caption is also not all visible..what could be the problem and what is the fix?? please help this is what i was working on for a christmas gift...oh one more thing..when i preview you it in idvd and imovie and even on apple tv...it looks great..just when i burn it that it doesn't come out right

Read the iDVD software "Help" files to learn more about the "TV Safe" area.

Help , I need to delete pics off my iPad that were left on it from the previous owner !

I bought my iPad used from someone , they thought they had deleted their pics that were on the iPad but it turns out they had not and I cannot figure out how to delete them ? This is taking up all the memory on my iPad and creating a major issue , does anyone know what to do ?

What should have been done: What to do before selling or giving away your iPhone, iPad, or iPod touch
And what you may still want to do to start fresh.

DPM 2012 R2 UR4 - DPM could not set security permissions on the replica or recovery point volume that was created.

Hi All,
I am running a fresh install of SCDPM 2012 R2 with a protection group that is backing up the 'C:\', Bare Metal and System State of some VMs. If i add any additional servers to the group since the first creation it returns the following error:
Modify protection group: System State & Bare Metal Recovery failed:
Error 419: DPM could not set security permissions on the replica or recovery point volume that was created.
Error details: The process cannot access the file because it is being used by another process
Recommended action: Review the error details, take appropriate action and retry the operation.
If i re-create the whole protection group it works fine.
Could any one advise any further diagnostics I can do to try and locate the reason behind not being able to modify the group after the first creation? I can add new servers to other PGs without any issues.
Thanks in advance,
Dan

If you are protecting any of the system state/BMR protection. Can you stop protection by deleting the older recovery points and then recreate the protection group.
This thread mentions this to be a hardware issue, albeit with less information on what exact hardware issue:
https://social.technet.microsoft.com/Forums/en-US/480679c2-1079-4847-ab38-5cc8f454ef86/error-419-dpm-could-not-set-security-permissions-on-the-replica-or-recovery-point-volume-that-was?forum=dataprotectionmanager
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx

Importing data from Excel to generate "filled" PDF form that was created in Designer

Hi there
I have a form that was created in Designer. The data that I need to import is all in a Excel spreadsheet with the same fields as the form.
Is it possible to import all the data so that it generates a printed PDF with the data on each line of excel?
For example:
If my excel file shows:
First Name      Last Name     Phone Number        UserID
John               Doe               416-777-9970           johndoe997
Mike               Rogers           905-887-3398          mikerogers997
In this example I would like to generate a PDF form for John and for Mike, each with their details filled out on the form based on the data in the excel sheet
Thanks in advance!

Assuming you have Adobe Acrobat 11:

A Table that was created at Run time. A Row Properly Deleted from Table Is Still Present on Form with BindingNavigator

Hello
I have a dataset that was created at design time
but - after I run the app, it randomly creates a table based on The Users name
since I do not know the users name before had, the table is not part of my existing dataset
(I actually used an insert into sql nonquery to just make this table a copy of the masterUserTable)
Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
I thought I did so with this code:
'TODO: This line of code loads data into the 'MyLearningDBDataSet.masterUserTable' table. You can move, or remove it, as needed.
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
Dim ThisNewVariable As String = MyUserNameIs & "UserTable"
Dim ThisNewTableName As New DataTable
Me.MyLearningDBDataSet.masterUserTable.TableName = ThisNewVariable
Me.MyMainDBTableAdapter.Fill(Me.MyLearningDBDataSet.masterUserTable)
that appeared to do the trick (but if it is incorrect please advice on the proper way to add a table made at runtime to a users existing datset)
Else where in my code I successfully execute the following NonQuery :
SqlString= "DELETE FROM " & MyUserNameIs & "UserTable" & vbCrLf &
"WHERE vState='" & txtStateInfo.Text & "';"
I check in Visual Studio 2013 that the row was deleted from the "GabrielUserTable" (Gabriel is the current value of MyUserNameIs) by using the Server Explorer and right clicking
on the table and choosing show talbe data
But the MyMainDBBindingNavigator is still showing the item I deleted.
So after searching for answers - I created a new button for testing and added the following code to test if it would work
Me.Validate()
Me.MyMainDBBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyLearningDBDataSet)
but the data is still shwoing after deleting it with my NonQuery
Please Help!

Hi genterprise,
>> Now - I have a binding navigator on my form, that is originally bound to masterUserTable, but my goal is to make it bound to the users table (let's say GabrielUserTable)
In my option, if you want to rebind the users table to the navigator, you need to set the BindingNavigator.BindingSource. Based on your description, it seems that you did not reset the datasoure of the MyMainDBBindingNavigator. It was the original datasource
of the masterUserTable. For more details about BindingNavigator.BindingSource Property. You could refer the link below:
# BindingNavigator.BindingSource Property
https://msdn.microsoft.com/en-us/library/system.windows.forms.bindingnavigator.bindingsource%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

Will opening a pdf in version 8, that was created in version XI, automatically 'secure' the document?

Will opening a pdf in version 8, that was created in version XI, automatically 'secure' the document?

Thank you.

Can't seem to change the Document Properties Advanced Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

Can't seem to change the Document Properties > Advanced > Reading Options in a Form that was created in Adobe LiveCycle. This option has been "greyed" out - anyone know how to update this to English so I can pass Accessibility Testing?

LiveCycle forms use a very different approach to create a PDF form than Acrobat and that approach makes many features for processing PDFs non-functional.
You might want to ask this question in one of the LiveCycle product forums.

Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts Layer Comps to PDF"? And how do I get them to look the same?

Why do vector lines appear different in my Photoshop document compared to the PDF that was created using "Scripts > Layer Comps to PDF"? And how do I get them to look the same?

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How do I keep a document that was created on another computer? I have the link.

How do I keep a document that was created on another computer. I have the link. https://adobeformscentral.com/?f=Mv9KGJZhLFi47Q-H63fajA

Hi,
The link you provided is for the HTML fillable form. Is that what you are trying to download?
FormsCentral form files are stored on the FormsCentral servers. If you are the author or a co-author of the form you can access it from any machine by logging into FormsCentral. If you aren't the author or a co-author of the form you will need to contact the author and have them share the form with your FormsCentral account. The following FAQ explains how to share forms with other users:
http://forums.adobe.com/docs/DOC-2462
Regards,
Brian

Delete document in a project that was created by copying from the Solution

Similar Messages

Maybe you are looking for