Delete exposure in THMEX and FTREX12 - error "Transaction does not exist"

I have transferred by error an exposure (using TFREX12) to HM. In THMEX I have deleted the newly created exposure that has a transaction Nber. Then in TFREX12 I try to reverse this transfer by using in the menu Position the function "Reverse transfer" but get an error message "Transaction xxx does not exist". How can it be deleted so that I can transfer the exposure to the appropriate Hedge Plan??
Thanks
G.

Hi,
correct procedure is to reverse transfer in FTREX12 without deleting the exposure in THMEX. If you deleted it in THMEX first, then the error is justified. To solve the problem, you can manually create an exposure with the same transaction directly in THMEX, then transfer reversal should be possible.
Rgds,
Tomislav

Similar Messages

Intercompany transaction does not exists

Hi,
I am have posted entry in F-02 and also i have asigned a new company code to the transaction and also document got created.
now i need to reverse the document for the reversal reason 1 in T.Code FBU8.
I am getting error message " Intercompany Transaction does not exists".
Please help me with this issue.

dear
check settings in OBYA. is clearing account configured for intercompany postings
and check that in OBA7 for the document type you using allow intercompany postings.
regards
rohit
Edited by: ROHITBALI on Nov 19, 2011 7:28 AM

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Error: SNAP_ADT does not exist in the database - manual check required

Hello Friends,
We are performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
Also find the output of SE11 & SE14 attached.
SE14->
Please help us with the manual check.
Regards
Sury

Hi Sury,
In regards to the error below:
1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
required
1EETGCLN SNAP_ADT
1EETGCLN Table does not exist
Could you please try to activate the following tables via SE11?
- SNAP_ADT
Once they are activated, Could you please repeat the phase and update the result?
Thanks and Regards,
James Wong
Follow us:
SAP System Upgrade & Update Troubleshooting Wiki Space.
SAP Product Support Twitter ( Hashtag: #NWUPGRADE)

ST06N transaction does not exist

Hi
We have upgraded the SAP NetWeaver 2004s support package stack level from 23 to 26, after that when we are executing the transaction ST06N - we are getting error message below the screen "ST06N transaction does not exist"
for that the program name we can able to execute in T code SA38 Program name RSHOST1N
thru the T code its showing the Message ST06N transaction does not exist,
Could pls guide us
Regards
Sriram

Hi Rupali
Thanks for your support as per your advice we can do that with help of Abaper
As of now we have upgraded the Support package 26 in Dev & QA. in the Production still i can able to execute the T code ST06N, My query's are Is this any bug or ST06N Tcode obsolete?
is this any one face the same issue ?
Regards
Sriram

Error Infoobject does not exists in Infoprovider

Hi Friends,
I am getting "Error Infoobject does not exists in Infoprovider" in Quality. Actually Fiscal Period and Variant are not showing up in Query designer left panel (where we can see infoprovider structure). This problem is only in Quality, the query works fine in Development and training system.
Any thoughts why am I getting this and way to rectify it? I tried transporting the query again by collecting query elements. Still it gives same error.
Thanks and regards,
Balaraj

Probably your data provider has been changed and transported to quality and your query is still using those objects. Please check the info provider in both system if they are in sink or not.
Regards,
Kams

Full import error : "user does not exists"

Hi all,
I had 5 separated windows based servers (32bit) with oracle database 9i. I decided to centralize them into one server. So, I configured a new Linux (64bit) and install an Oracle 10gR2. Then I configured a starter database with dbca. I prepared a full dump file from one of old servers and successfully full imported it into starter database on new Linux (10g) server. After that I configured another database using dbca. But when I wanted to full import the previous dump file into new database I have got the error "user does not exists" regarding some demo schema and import terminated unsuccessfully.
I decided to create users regarding the errors and restart the import. After each user creation I was getting a new error for a new user account.
My main question is why first time import terminated successfully without any error but second one in new database raised error?
Thank
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:38 AM

Hi yingkuan,
imp full=y file=.... log=..... userid=system/manager@orcl
ALTER SESSION SET CURRENT_USER = "HR"
ORA-.... : user does not exists
And I know that import will create users that are not exists. Actually, all my specified schema are created but not some of accounts
Regards,
Iman
Edited by: Iman.Jam on Aug 25, 2009 9:59 AM

Dump error: Dynpro does not exist while in transaction me31K

HI,
I am getting dump while creating the Contract in ME31K.
hort text
   Dynpro does not exist
hat happened?
   Error in the ABAP Application Program
   The current ABAP program "SAPLXM06" had to be terminated because it has
   come across a statement that unfortunately cannot be executed.
rror analysis
   The system attempted to use dynpro 0201 in program "SAPLXM06".
   This dynpro does not exist.
rigger Location of Runtime Error
   Program                                 SAPLXM06
   Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
   Row                                     10
   Module type                             (FUNCTION)
   Module Name                             EXIT_SAPLEINM_013

Hello,
use transaction SMOD to check SAP enhancement MM06E005 in your system. Screen SAPLXM06 0201 is the contract header subscreen. The system report it missing because the enhancement MM06E005 (Customer fields in purchasing document) was activated in your system, but not implemented. So either disable/delete the enhancement or create a subscreen.
regards,
J.N.N.

Error: File does not exist (while trying to get Petstore and demos to run)

Hi all,
I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
Please help me!!! I am going crazy with this.
Thanks,
Grant
PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.

I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.

Dump error: Dynpro does not exist while in transaction me31L / me31k /ME41

Hi Experts
I am experiencing dump while attempting to create Schedule agreement/contract.
Error analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPLX06
Include MM06EO0C_CUSTSCR1_HEAD_SET_DAT
Row 10
Module type (MODULE PBO)
Module Name EXIT_SAPLEINM_013
Please suggest the correction
Reagrds,
Ankush Shinde

Hi,
This looks like some one is playing around with screen exits. Open the FM EXIT_SAPLEINM_013 in se37. Double click on include
ZXM06U35 and check the status of this include. I hope this is in Inactive status because of some syntax error.
If above is correct, then check and correct the syntax errors.
Also can you see what is the main program SAPLXM06 status. If not active, try to activate it in SE80.
Thanks,
Vinod.

Dump error: Dynpro does not exist while in transaction me41 / me31k

Hi Experts
I am experiencing dump while attempting to create rfq/contract.
Error analysis
    The system attempted to use dynpro 0301 in program "SAPLXM06".
    This dynpro does not exist.
Trigger Location of Runtime Error
    Program                                 SAPMM06E
    Include                                 MM06EO0C_CUSTSCR1_HEAD_SET_DAT
    Row                                     10
    Module type                             (MODULE PBO)
    Module Name                             CUSTSCR1_HEAD_SET_DATA
Please suggest the correction
warm regards
marias

Hi, Dhananjaya Raj,,
I am facing same issue with same ABAP dump and error ? How you resolve it ?
please share your footprint. thanks in advance ...

Dunning error (form does not exist)

Hi,
While performing the dunning after selection the Individual dunning notice for printout the system shwoing error that '''FORM F150_DUNN_01''' DOES NOT EXISTS.
When I tried several times to performance the dunning it showing the same error message as above said.
Can any one let me know why does this happening. please give your valuable solution regarging on the above said issue.
Thanks in Advance.
Regards,
Suresh

Hi
In Dunning Procedure --- FBMP
you will select new entries and give Dunning procedure , name , dunning intervals in days , No. of dunning levels , line item grace periods , interest indicator , select standard transaction dunning checkbox , reference dunning procedure for texts(dunning procedure) and save.
select Dunning texts button and give company code and select customer radio button and enter.
select new company code button and give company code and enter.
select seperate notice per dunning level checkbox
Deselect Dunning by Dunning Area checkbox and save.
select back arrow and select yes for the message to save the data.
select dunning texts button once again , give company code , select customer and enter.
Dunning level (1) Form (F150_DUNN_01)
Dunning level (2) Form (F150_DUNN_01)
Dunning level (3) Form (F150_DUNN_02)
Dunning level (4) Form (F150_DUNN_02)
select dunning levels button and under print parameters , select Always Dun CheckBox's.
select charges button , give currency and enter.
select back arrow and save
Assign the Dunning procedure in Customer Master.
Check with the Dunning Procedure you had created.
Regards
Venkat

Error : Query does not exist in user group

Hello,
I copied the one existing transaction i.e. Z10SD25 and made the new transaction.
Also i created the new Infoset and Query in an existing User group.
I also assigned the Infoset to user group and query to Infoset.
But while running the new transaction it is giving me error that 'Query does not exist in user group'.
Kindly help me with this.
Thanks in advanced.
Regards,
Darshana

Hi,
After assigning the Infoset to user group and query to Infoset, click on 'Generate' button.
Note: The query can only be generated when the InfoSet is assigned to a user group.
Also check whether the usergroup is given or not for queries.
SQ01 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving

Smart forms Error - Form does not exist

Hi,
I have created a smart form and activated without any inconsistancies. SE38 code has been done properly and activated.
While executing the forms an error has raised saying 'Form does not exist'.
Could anyone suggest me what is the route cause for this error?
Regards,
Arundathi.

Hi
Have you designed the smartform in SMARTFORMS tcode?
after writing the code
see the steps and check once again
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
<b>step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html</b>
Subtotals - Check the link...
Re: Subtotal with Table Node in smartforms
<b>Reward points for useful Answers</b>
Regards
Anji

MR11 - GR/IR Reconciliation - Error "Plant does not exist"

Dear All,
Background -
We have a PO created in 2004 with one line item, against plant ABC for quntity 100 Units.
MIRO has been done (100 uinits) with out MIGO and the vendor has been paid.
The plant ABC was deleted in 2005.
Problem-
We want to reconcile the quantities for this PO. We get the error "plant ABC does not exist"
Solutions tried but not ok -
We can post a JV for accounting, but this PO will remain open.
Do we have a solution for this?
please let me know your sugesstions and ideas.
regards,

1)You can post a JV.
2)Mark the line item for deletion of this PO.
3) This will not appear in any report which will be run on plant basis.
Reward if helpful

Delete exposure in THMEX and FTREX12 - error "Transaction does not exist"

Similar Messages

Maybe you are looking for