Delete function stays at grey
Help, when attempting to trash a track in Itunes the delete function found in the Edit box will not highlight so unable to get rid of unwanted tunes
hey i just recently had the same problem with my girlfriends macbook (today), same specs and everything, we were having problems with leopard (random lagging, safari acting up etc.) apple store recommended a archive and reinstall, didn't help, then recommend a erase and instal off the leopard disks, we back up the computer with time machine and after the erase we used migration assistant to transfer everything and had to step out, came back the computer was asleep/unresponsive, we restarted it and just got the grey screen nothing else. tried to open in disk mode, nothing. tried to boot up off the instal disks that came with the computer nothing. (all this was on the phone with apple care) went through all the steps to start up, hold down c, hold down d, hold down option, etc. nothing happened same grey screen. the guy said it MUST be a hardware issue take it in to apple to get fixed, were going that tmw we'll see what they say happened.. so taking it in might be your best bet or getting a new drive.
Message was edited by: Gr3gory11
Similar Messages
-
I want to intall Mozilla Firefox 4. Will this delete the contents of Firefox 3.6? I was to the point that I was ready to Reboot the Whole system. I called Microsoft and they resolved the Silverstream issue. When in the control panel I click on the delete function all that is does is stay at Blue. It will not delete and it does not give me any message.
The normal method is simply
* Help -> Check for Updates
on Firefox (Window XP)
* see also [[Updating Firefox]]
You should be able to delete Firefox and remove it, from your Windows XP control panel although that may not be what you intend.
If you have doubts about compatibility stay with Firefox3.6 for now.
Some software extensions will currently have problems with firefox 4 (and that iircc may include some versions of silverlight )
Do NOT use any delete settings (or whatever it is worded) that will loose all your passwords and bookmarks.
BTW the safe mode in relation to Firefox is a totally different concept from Windows safe mode, but you probably have no need to use either of them.
* see also [[Safe Mode]]
On an ordinary upgrade Firefox will preserve your profile details which include bookmarks any passwords.
You should have no problems in installing Firefox 4. You should be able to install firefox 4, and retain any bookmarks etc that were used in firefox 3.6, but sometimes extensions may be incompatible. -
hi,
how I can delete add-in applications in add-in applications section , I try to delete one but I don't see any delete function, I see only enable and disable function in the manage add-in applications wizard.
thanks
johan
h.davidHi,
If you want to remove the add-ins of Office 2010 programs, you need to remove it from control panel.
For example, if you use Excel, please try to follow the link to delete the add-ins:
http://office.microsoft.com/en-us/excel-help/add-or-remove-add-ins-HP010342658.aspx
If I misunderstand something, please let me know.
Regards,
George Zhao
TechNet Community Support -
I use an iPad. It automatically switched me from old-fashioned Acrobat to DC. How do I delete docs that were put on my iPad with the old Acrobat? They are not in the cloud, and DC does not seem to have a delete function for them.
Hi,
By default, Acrobat DC for iOS displays recently viewed files. You need to switch to other file location (such as Local, Document Cloud, Creative Cloud) to delete, rename, move, or duplicate files.
You can switch to Local, if you would like to see the files and folders that are locally stored on your iPad.
Would you take a look at the following document to see how you can switch to other file location and delete files?
How to manage files in Acrobat DC for iOS
Please let us know if you have additional questions. Thank you. -
"Place in" function in Bridge greyed out, after uninstalling previous version of CC.
I recently updated to the CC 2014 version of the apps. After that I removed the previous versions of Photoshop, Indesign and Illustrator.
Now the 'Place In" function in Bridge is greyed out. I tried restoring File associations, re-installing Bridge etc... but nothing worked. It's still unavailable.
Is there any way I can link Bridge with the 2014 apps again so I can use the 'place in' function again?There are 2 startup scripts in Bridge: "Adobe Bridge CC" script & "Auto Collection Scripts CC 2014". When I click 'reveal all my startup scripts' I get an empty folder.
I also tried resetting my preferences but that didn't help. The 'Place in...' function is still greyed out.
I also had to manually set all the file associations with my apps because bridge always tried to open the previous versions from Photoshop CC, Illustrator CC etc...
(in fact...If I reset the file associations, bridge defaults back to the previous versions for all apps... and then I have to change it again to the CC 2014 version)
It's as if Bridge doesn't know I have the CC 2014 version and can't communicate with it. -
Is there a way to password protect the delete function for pics/videos??
My 2yr old toddler is randomly deleting my pics and videos on my iphone. Yes he knows how to navigate to the pics and videos on his own. I think its that shiny red delete button that catches his eye when he's bopping around form screen to screen. I just want to disable the delete function function so that he doesnt do that anymore. I know there is the backup but that relies on me knowing when and what he deletes as I dont back up all the time.I heard Android has this feature but wasnt sure if the iPhone did. Any help would be appreciated.
The real way to fix this problem is to obvioulsy not allow a 2 yr old to play with your $600 phone.
Get that kid an iPod touch to play with ! -
Multiple message deletion functionality disappears
My iPhones 5S with iOS 8.1 loses multiple message deletion functionality. I tap a message in communication thread, chose more options, mark messages to be deleted and push waste bin. When used a few times the waste bin is replaced with camera options and deleting multiple messages is not possible; see screenshot. In order to re-establish the functionality, I have to close the message app down and restart it. Are there any solutions or work around to this?
Hi Kare Gronholt,
If you are having issues with your iPhone's ability to delete multiple messages, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
OS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Delete Functionality in manual tabular form
Hi everyone,
I have created 2 tabular forms on the same page.everthing is working fine.Both the tabular form are able to insert and update.I am getting problem to implement the DELETE functionality in those tabular form.
I inserted this code htmldb_item.checkbox(6, id) del in the region and i created a delete process.But i am getting (no data found) error.
could anyone help me in solving this.
thanks
phani
===========================================================
DELETE PROCESS:
FOR i in 1..HTMLDB_APPLICATION.G_F01.count
LOOP
DELETE FROM (TABLE NAME)
WHERE id = HTMLDB_APPLICATION.G_F06(i);
END LOOP;
=============================================================
TABULAR FORM 1:
REGION:
select x.column1,
x.column2,
x.column3,
x.column4,
x.column5,
x.del,
x.cks
from (
select htmldb_item.hidden(1,column1) column1,
htmldb_item.text(2,column2,10) column2,
htmldb_item.text(3,column3,10) column3,
htmldb_item.text(4,column4,10) column4,
wwv_flow_item.date_popup(5,null,column5) column5,
htmldb_item.checkbox(6,column1) del,
htmldb_item.md5_checksum(column2,column3,column4,column5) cks
from TABLENAME
union all
select htmldb_item.hidden(1,null) column1,
htmldb_item.text(2,null,10) column2,
htmldb_item.text(3,null,10) column3,
htmldb_item.text(4,null,10) column4,
wwv_flow_item.date_popup(5,null,null) column5,
htmldb_item.checkbox(6,null) del,
htmldb_item.md5_checksum(null,null,null,null) cks
from dual) x
==================================================================
PROCESS:
declare
l_cks wwv_flow_global.vc_arr2;
j pls_integer := 1;
begin
-- Get original MD5 checksum
select wwv_flow_item.md5(column2,column3,column4,column5) cks
BULK COLLECT INTO
l_cks
from TABLE;
-- Compare the original checksum, l_cks,
-- with submitted checksum, htmldb_application.g_fcs.
-- If they are different, raise an error.
-- for i in 1..l_cks.count
-- loop
-- if htmldb_application.g_fcs(i) != l_cks(i) then
-- rollback;
-- raise_application_error(
-- -20001,
-- 'Current version of data in database has changed '||
-- 'since user initiated update --process.');
--return;
-- end if;
-- end loop;
-- update
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
update TABLENAME
set column2= htmldb_application.g_f02(i),
column3 = htmldb_application.g_f03(i),
column4 = htmldb_application.g_f04(i),
column5 = htmldb_application.g_f05(i)
where column1 = htmldb_application.g_f01(i);
else
if htmldb_application.g_f03(i) is not null then
insert into TABLE
(column2,
column3,
column4,
column5
values
(htmldb_application.g_f02(i),
htmldb_application.g_f03(i),
htmldb_application.g_f04(i),
htmldb_application.g_f05(i));
end if;
end if;
end loop;
end;
I created the other tabular form on the same page with
htmldb_application.g_f11(i)
htmldb_application.g_f12(i)
htmldb_application.g_f13(i)
htmldb_application.g_f14(i)
used the same code.Have you got any response on this? I would like to know how to do it too. I am trying to implement a manual tabular form on a page and need this functionality.
I do know one thing. After attending the ODTUG conference last week, Raj said something about you have to process check boxes and radio groups separately from the rest of the form.
Thanks,
Michelle -
How do I make deleted gmail stay deleted? All of a sudden, everything that I have deleted reappears the next time I open the mail.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi all,
I have a problem with OBIEE cookies and portal link.
So, a fount this solution http://onlineappsdba.com/index.php/2011/10/22/delete-obiee-cookie-explicity-other-than-logout-call/.
and this part:
OBIEE Cookies Delete function needs to be added in the dashboard page .Open the Dashboard Editor and add the Cookie deletion code using java script in a text prompt and Check Contain HTML Markup.
But I don't know the javascript function with i need put and how can I call the function when the BROWSER is closing.
ThanksYou can create a compound key of Cat + SubCat (concatenation in a logical column is a quick win) which will render the SubCats unique and assign that as the logical level key:
SubCat:
A-Basic
A-Value Add
A-High
B-Basic -
IIs it possible to retrive deleted Function Module
Hi all,
i just want to know is it possible to retrive deleted Function Module .
the request is not released yet.Hi Sai,
Its not possible. (Confirm by contacting ur Basis people, if they can help).
But the following is valid only if your function module is(or was) a transportable object.
Go to SE37, enter your function module name and create. Assign it to the same function group and have the same interface and description. Save it, activate it.
Now go back to SE37, enter the function module name, in the menu, 'Utilities>Versions>Version Management'. Now you should see all your previous versions. Select the most recent past version. Do a retrieve and then activate it as the latest version.
Not sure if it works. But still give it a try.
Best Regards,
Anjali
Message was edited by: Anjali Devi -
Hi all I have a bean with my sql stuff inside! I also have a servlet calling the sql functions.
I have written my delete function inside my bean and then called the function from the servelet. I have then called used a JSP page to excute the view all records method, using the bean. I now want to add a link that will delete the selected record, which will call my delete method from the bean! not sure how to do this? Can some one please help!
Thanks!Have the JSP submit a request to the servlet to delete the records. The servlet instantiates the bean, asks it to delete the records from the database, updates the new list of available records in scope, and sends the JSP that displays all the available records back as the response.
I think you've done this right - capture the database code in a bean, have a central servlet that handles all client requests, and let the servlet instantiate the bean to do the work. It's called Model-2 MVC. There are frameworks like Struts and Spring to help you manage it. -
Disable Delete function on Menu in Tcode IW32
Dear all,
I want to disable Delete function on Menu in Tcode IW32 when the status Maintenance Order is LOCK, please help me!!!
1. The status of a Maintenance Order is LOCK
2. Disable Delete functionHi,
Try below exits :
EXIT_SAPLCOIH_006 : PM Order: Customer Enhancement for Exclusion of Function Codes
Function code for Delete is : LOEA.
Kindly check. -
Delete function has stopped working on Thunderbird for all files
Windows 7 Professional operating system on my laptop. Delete function in all forms was working fine until yesterday. Have failed to work out the problem.Any ideas out there?
To diagnose problems with Thunderbird, try one of the following:
*Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
*Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates. -
Lock the delete function (Trash) for contract documents
Dear Experts,
I have Query in SAP CLM :
I am in need to lock the delete function (Trash) for contract documents after they have been executed. After a user sets the contract document phase at "Executed," they should not be able to click the trash icon and delete that contract document record.
Thanks in advance.
Best Regards,
IqbalHi Mudit,
we have already script for Contract Document and Post Phase Change.
I am not java expert, where to put the code for delete or inactive the trash icon in this programe, Pls Help
// Author: ABCD
// Class: Contract Document
// Context: Document Lifecycle Event
// Target: Post Phase Change
// Imports
import com.frictionless.api.doc.IapiDocumentLockManager;
import com.frictionless.api.common.types.ObjectReferenceIfc;
import com.frictionless.api.common.types.TypeFactory;
import com.frictionless.api.contracts.ContractIBeanIfc;
import com.frictionless.common.db.PersistentBo;
import com.frictionless.api.doc.collaboration.*;
import com.frictionless.api.common.log.Logger;
import java.math.BigDecimal;
import java.util.*;
import com.frictionless.api.doccommon.masterdata.*;
import com.frictionless.api.common.exception.*;
import com.frictionless.api.ibean.IBeanIfc;
import com.frictionless.api.ibean.IBeanHomeIfc;
import com.frictionless.api.contracts;
import com.frictionless.api.usermgmt.masterdata.*;
import com.frictionless.api.common.exception.*;
import com.frictionless.api.common.types.*;
import com.frictionless.api.ibean.*;
ApplicationException ae = new ApplicationException(session);
// Logger
logMsg = Logger.createLogMessage(session);
// Agreement Bean
agreeBean = doc.getParentIBean();
if (hasValue(current_phase))
// Lock the legal approval and workflow fields after draft phase
if (current_phase.equals("Draft"))
IapiDocumentLockManager.unlockField(session, doc, "CLAUSE_CHANGE");
IapiDocumentLockManager.unlockField(session, doc, "LEGAL_APPROVER");
if (!(current_phase.equals("Draft")))
IapiDocumentLockManager.lockField(session, doc, "CLAUSE_CHANGE");
IapiDocumentLockManager.lockField(session, doc, "LEGAL_APPROVER");
// If contract document phase is not Internal Approval
if ((current_phase.equals("Executed")))
agreeBean.getIBeanHomeIfc().upgradeToEdit(agreeBean);
collaboratorList = agreeBean.getCollaborators();
for (collabIter = collaboratorList.size(); collabIter > 0; collabIter--)
// Get the collaborator
collab = collaboratorList.get(collabIter-1);
name = collab.getDisplayName();
if (!collab.getCollaboratorRole().getDisplayName().equals("Owner") @and !collab.getRepresenting().getDisplayName().equals("Legal"))
collaboratorList.delete(collab);
agreeBean.getIBeanHomeIfc().save(agreeBean);
if ((current_phase.equals("Internal Approval")) @or current_phase.equals("Legal Approval"))
agreeBean.getIBeanHomeIfc().save(agreeBean);
agreeBean.getIBeanHomeIfc().downgradeToView(agreeBean);
Maybe you are looking for
-
Hi I am creating a flash animation to be projected. I have to burn in onto a dvd. I have tried converting the .mov file that flash exports, and flv to mpeg. The preview looks fine, but every time the dvd quality is terrible. I have tried HD, h. 264,
-
Runtime Error - In PO creation
Hi friends, Pls advise how to resolve this runtime error issue mentioned below...which Im getting in PO creation and at the time of releasing the same but getting the error as background express document. Note(FYI):No enhancement has been developed a
-
How do I reinstall OS X Mavericks
I inhereited an Apple at work for testing purposes. It was set up with only one Admin user and that person is long gone, So there is currently only one unusable admin and a guest account. I think the only thing I can do is re-install OS X Mavericks.
-
can you help me get back into my phone i really need to use it!
-
IMac force select "Display Audio" when headphone jack is in use
I have a new 2012 iMac and Thunderbolt Display. I use the Display Audio from time to time, but also use a set of high quality speakers plugged in to the headphone jack. Some applications, like Chrome (Google Hangout, Gmail phone calls) will default