Delete Init request

Hi all,
I have an ODS which updates data to an infocube. I accidentally deleted the request from the cube and now its asking me to do an init upload to the cube.
But when I do an init upload to the cube by using UPDATE 3.X data to targets it says
" Deltas already loaded for request ... no 2. init ....If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to
delete the delta queue in the source system, and restart the delta
process.
Choose the menu entry 'Init. Selections in the Source System' from the
Scheduler.
If I delete the Init package , will it delete the data from Infocube or the ODS.
Regards.
Paresh.

Hi,
Try Right Click Infocube-> manage -> reconstruct->Your deleted request will appear here. select it and click 'recontruct/insert'. This will do .
Best Regards

Similar Messages

Unable to Delete init request

HI ALL,
i have a delta laod infoapckage, i tried init w/o data tranfer. request generated with '0' in the data target tab tab.
tried making it green and activate, i tried making it red and delete.. but its not getting deleted.. under update tab delta update option is enabled for infopackage
ERROR MEASSAGE
Processing in Warehouse timed out; processing steps mising
Diagnosis
Request processing in the BI system is taking a long time and processing step Second step in the update has still not been executed.
System Response
Caller is still missing.
Procedure
In the process overview in the BI system, check whether processes are running in the BI system under the background user.
If this is not the case, check the short dump overview in the BI system.
please let me know the solution to activate dso in process chain with this infopackage
Thanks,
venkat

Hi naidu,
Can you tell me why you want to delete the request? What is the scenario?
What do u mean by already have delta IP, i tried init w/o data transfer?
If its not allowing to delete the request from DSO...
Delete the entry from the below table ... RSICCONT ...it will get deleted from the DSo as well.
Later delete the init selections from IP menu --scheduler --> Init options for source system --> delete the init request .
Tcode - se11 --RSICCONT -> enter the request and from menu select the option delete...it will delete the entry from DSO.

How to delete init request when load is taking place from ods to Cube

Dear All,
I have initiated the init load from ODS to Cube, but the init request was not successfull... Now on clicking the init infopkg i get the short dump error....
I am trying to acess this infopkg so that i can delete the old init and reschedule it again...
Now in order to avoid this error i need to delete the init request somehow..... Since data load is happening in BW system only there is no way to go to delta queue and delete the init...
How can i delete the init request in this case or how do i avoid this dumup error???
Thanks & Regards,
Anup

From se11, go to the table, see the content... from this window mark the check box for relevant entries in the first column and click on Display button (F7)
enter "/h" in the command prompt and press enter
Click the top most green button to execute.
From the debugging screen, double click on variable "CODE" change the value to "DELE" (from "SHOW") and save (by pressing enter in bi7 and by clicking pencil icon in bw 3.x ).
Press F8
In the result screen you will find the delete entry in the application bar
Delete one by one after ensuring the record content.
Better you can ask any abaper to delete the table entries in the debug mode coz its a production server..else you can call me 9500066350(I prefer you to go along with abaper if you have no option dont wait for calling).

Deleted Init Request

Hi all,
By mistake i have deleted the init request.
How to proceed now ?
Can i use Init without data transfer option ??
Regards,
Viren.

If its delta queue based datasource (LO), i don't think it will create any problem. As your delta records are getting updated in your delta queue, you are just re-initalting init again for gettiing ur delta working properly.
Abt Timestamp based datasources (FI/CO), i am not much sure as you don't do any init setup for it manually. Do init without data transfer for the same selection, and load data for the days you have not extracted using repair full load. Hope it will bring delta for the days your load was not working properly. You need date field as selection for this in your datasource. Do you have date field in datasource?

Init request not getting loaded

I am running two loads to 0PUR_C01 from 2LIS_02_ITM and 2LIS_02_SCL. I was able to run the init with data transfer but when I am running the 2LIS_02_ITM init load , i am getting this message
Delete init. request
REQU_3ZFQKN0R64ZT08BDO5HFXLJXM before running
init. again with same selection
How can make the init run?
Thanks

Hi Karun,
I guess there is already init load done by 2LIS_02_ITM. Make sure that your old init load is deleted before going for fresh init load.
It can deleted from Infopackge -> Schedular(Menu) -> Init Option for Source system.
Select the init load request and click on delete.
And then try doing init load. Hope it will work.
Regards,
Rohini

Short Dump Error in deleting the Init request

Hi Gurus,
i am loading master data from sap r3 by init update.
now due to some requirement i have to delete the init request , but when i try to delete the request
it goes to short dump and gives the error message as
Runtime Errors MESSAGE_TYPE_X
Date and Time 01/05/2009 01:54:15
Short text
 The current application triggered a termination with a short du
What happened?
 The current application program detected a situation which real
 should not occur. Therefore, a termination with a short dump wa
 triggered on purpose by the key word MESSAGE (type X).
Error analysis
 Short text of error message:
 Error when opening an RFC connection
 Long text of error message:
 Technical information about the message:
 Message class....... "RSAR"
 Number.............. 051
 Variable 1.......... "Error when opening an RFC connection"
 Variable 2.......... " "
 Variable 3.......... " "
 Variable 4.......... " "
 Last error logged in SAP kernel
 Component............ "SAP-Gateway"
 Place................ "SAP-Gateway on host sapdev / sapgw00"
 Version.............. 2
 Error code........... 631
 Error text........... "max no of gateways exceeded (100)"
 Description.......... " "
 System call.......... " "
 Module............... "gwxxrd.c"
 Line................. 8438
 The error reported by the operating system is:
 Error number..... " "
 Error text....... " "
Trigger Location of Runtime Error
 Program SAPLRSSM
 Include LRSSMF03
 Row 1,627
 Module type (FORM)
 Module Name DEL_SOURCE_SYSTEM_INIT
1624 communication_failure = 1 message l_msg_text
1625 system_failure = 2 message l_msg_text.
1626 if sy-subrc <> 0.
>>>>> message x051(rsar) with l_msg_text(50) l_msg_text+50(50) '' ''.
1628 endif.
Please help me on this as untill it will not be deleted, I will be unable to load the data.
suitable answer will get Full points.
Thanks.

Hi Saurabh,
PLEase go through these notes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383837393039%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383934313030%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393738303738%7d

Deleting failed request from DSO leading to delete of INIT of DSO to Cube

data flows from ds1, ds2 and ds3 to dso1 as delta. the data is then taken from dso1 to cube1 via delta
data flows from ds3 to dso2 as delta. the data is then taken from dso2 to cube 2 via delta.
when a data is loaded from ds1 or ds2 or ds3 to dso1.. or when data is loaded from ds3 to dso2.. now if we try to delete this un activiated request from lets say dso1. it gives and error that the init from dso1 to cube1 would be deleted as the data has already been data marted.
this happens even if the request in dso1 is inactive successful or inactive failed.
i did an init of ds1,ds2, ds3 to dso1. and also did an init from dso1 to cube1. but the problem persists.
though if all goes good. like no failures in the load, then all is well.
but if the load failed. say ds2 to dso1 failed. then when we attempt to delete this request from dso1, it says that it has already been uploaded to cube1 and the init will have to be deleted. here when we checked the datamart sign in dso1, it looks like the newly loaded n unactivated data is somehow assosiated with the dso1tocube1 init.
any thoughts?

Please give more info.
How have you connected DS01 and Cube 1? Transformation or update rules? How have you done the initialization?
What is the version SAP BW that you are using?
Have you checked any relevant SAP Notes?
Thanks,
Krishnan

Last Init request deletion

Hi,
Is there any way to know which user deleted last init request status from BI ?
Thanks
dipika

Hi,
the table RSSDLINIT holds "Last Valid Initializations to an OLTP Source"
I believe you'll have to play with RSSELDONE, RSREQDONE, /BI0/SREQUID as well:
1. get all inits from RSSELDONE (SELECT distinct RNR FROM RSSELDONE WHERE UPDMODE = 'C'.
You can get the time of request from RSREQDONE and it's SID (sequential number) in /BI0/SREQUID.
2.for each the the datasource/source system pair check if there is a valid init in RSSDLINIT with the same request ID; if no, this init has been deleted..
hope this helps...
Amol

How to delete Init flag in a process chain, before processing the init

Hi,
At the end of the week i need to re-execute the init request from ODS1 to ODS2.
Therefore, i have to delete the init flag first and the requests in the CUBE1, everything automatically in the process chain.
The schedule must be as follow :
1. Delete init flag on ODS1
2. Delete all request from ODS1 in the CUBE1
3. Load an regular INIT request from ODS1 to CUBE1.
Notes :
I cannont clear all the CUBE1 content, as i have other datasource than ODS1.
CUBE1 is the only one data-target of ODS1.
Any suggestion, as there is no process in the process chain to "Delete Init Flag".
Best regards,
Ludovic

Hi
Ad.1
start code----
DATA: v_count TYPE i,
p_dsourc LIKE roosprmsc-oltpsource,
p_rlogsy LIKE roosprmsc-rlogsys.
p_dsourc = 'your source'. *"8E2_ODS1"
p_rlogsy = 'your system'. *"BP100"
SELECT COUNT(*) FROM rssdlinit INTO v_count
WHERE oltpsource = p_dsourc
AND logsys = p_rlogsy.
IF sy-subrc NE 0. "MesgTyp E end the program abnormally
MESSAGE e508(db6) WITH 'x' 'x' 'in DSource and/or LogSys'.
EXIT.
ENDIF.
Call delete function
CALL FUNCTION 'RSS1_QUEUE_DELETED_IN_OLTP'
EXPORTING
i_oltpsource = p_dsourc "OLTP-Source
i_logsys = p_rlogsy "LogSys (Myself or Remote)
EXCEPTIONS
failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e508(db6) WITH 'x' 'x' '===> No sucess <==='.
ENDIF.
---end code
Ad.2
See RSA1-> Infosources -> select your Infopackage -> Change ->
Data targets -> Automatic Loading of Similar.. -> Delete existing Request
Ad. 3
Create Infopackage with init
Regards
PWnuk

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Delete Overlapping Request

Hi All,
I am trying to use the process type Delete Overlapping Requests from cube in Process chain after loading the data from the Infopack full load and DTP Delta . With the infopackage selection in process type the message after execution is no overlapping request found.
Deletion selection I used is Full or Init loads, Same Datasource. and Selection are same or more comprehensive.
And in the infopackage I dont have any selections.
Please help me to solve this error.
Regards
PV

C i'll explain our scenario..
there was data loaded from 2 data sources to one cube thru 2 dtp's from 2 DS's in process chain...
Soon after the 2 DTP steps, delete overlapping request step is defined from both the ends.in chain...in whcih variant is
object type: the same DTP and its name which loads from PSA to cube.
radio button selected as: edit all infocubes with following delete selections.
selections: delete existing request under which Only delete request from the same DTP.
same or cmprehensive.
the other variant is defined as the same but with another DTP name in object type..
the Output of the cube will be only latest(current day) requests..
rgds,

Process Type - Delete overlapping requests from an Info Cube

I have read many threads on this topic, still have some questions. To give you background, I will be doing delta load (delta process chain). But before delta, I want to do setup initialization (init process chain). I want to use this process type in my init process chain to delete all data in my cube loaded from a specific ods. I cannot use delete all contents process type because many odss feed the same cube.
1.     Do you put this process type after Load Data or before Load Data. I have seen both cases in SDN forums.
2.     Variant of this process type is an info package. Does this info package have to be same as in load data step or it can be different.
3.     I want to delete all data in cube which was loaded from my ods. Term overlapping is confusing to me. Will this process type delete all data or not.
Tanks in advance.

Yes, you can do that. Goto RSPC - under process types Load Process and Post Processing, you will see DELETE OVERLAP REQUESTS FROM INFOCUBE option is there.
Select the proper check boxes like same sourcesystem, same datasource etc...
If it is one time deletion, why not do that manually?
Also check: How to delete most recent request in a Cube by using process chain
Hope it helps..

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Delete selective requests?

Is there an easy way to delete all request from a particular Data Source in a cube? I guess I need to re-init ONE of them.

Hi,
No is does not.
-Vikram

Multiple Init Requests

Hello Experts
I have a scenario where i have to load data into two different targets with one infosource.
I am loading the data into cube A (Init and Delta from the past one month) Now i have the requirement where i hve to load the data into the different Target with the same infosource.
But i couldnt able to do the Second Init for the second data target. How can i achieve this. i created the new infopackage but still i cant do that. any help is really appreciated
regards
Srikanth

Hello Everyone
Thanks for everyone for giving informative replies. I am loading the data into two different targets with one infosource. we have some different routines for both the cubes in update rules. So we require different data in two different targets. As suggested in the discussion, i can delete the init request and do it again for second target but if i do that how can i do the delta for first target.
In case if i delete the init request and do the init update for the second target, then when i want to do the delta for the first target will i face any problem.
Regards
Srikanth

Delete Init request

Similar Messages

Maybe you are looking for