Delete Intransit from APO which Loaded by PI from external interface

Hi all,
I am facinf a problem in deleting the Order created by External Interface.
We are loading Inransit as PO Mamo (ATP Category AH). Now we need to delete all the Record with AH ATP categoy before we reload new intransit to APO.
Problem is we are not able to delete those order as those are not in Live Cache.
We try using transaction /n/sapapo/bp2 but every time its throwing error "SAP APO system Q51CLNT100 has been declared as an SAP R/3 system.
and even i try deleting from /SAPAPO/RLCDEL. but its not deleting those order.
Can some one suggest what to do.
What all the option that we can try to delete the intransit.
Thanks & Regards,
Amit Sharma

Hi Amit,
You can use BAPI to delete AH ATP Category.
1. Read all Purchase Documents from BAPI_POSRVAPS_GETLIST3 for product u2013 location for AH Type ATP Category only.
2.Get the ORDID on the selection made.
3.Call BAPI_POSRVAPS_REMOVEITEMS and load the list of order no. and then delete it.
Please try this.
Thanks,
Dipankar

Similar Messages

  • ITunes Doesn't Delete Movies From External Hard Drive

    I have all of my iTunes media on an external hard drive. However, when I just tried to delete a movie (from within iTunes), it removed the movie from iTunes, but the actual mpeg file is still on my external hard drive. Is there something I'm doing wrong, or am I going to have to manually delete content from external hard drive? Thanks.

    When you delete an item from your iTunes library, iTunes will give you the option to delete the file too, but *only for items that are located in your iTunes Media folder.* So, assuming your iTunes Media folder is on your local drive, what you are seeing is the correct behavior.
    The best procedure in this case is to right-click the track in iTunes, choose Show in Finder, and delete the file within Finder. Then go back to iTunes and delete the track from the library.

  • I can't delete the master file, which is located on my external HD, through aperture

    I import a folder to aperture which is stored on my external HD, and keep the originals on the HD.  If I try to delete a master file with the option, file-delete master image and all versions, the photo deletes from Aperture, but not my hard drive.  I have even tried to delete my trash, but no luck.  Please help, otherwise I do not want to use aperture for file management, which was one of my major reasons for buying it.

    After you've deleted a file it from the project it goes into Aperture Trash. When you empty Aperture Trash (Aperture>Empty Aperture Trash) you will get a dialogue box asking "Are you sure you want to permanently delete all items in the Trash?" Under this there is a checkbox giving you the option to "Move referenced files to System Trash". If you check this box it will move the master to the system trash, and from there you can permanently delete the file.
    All this is to stop you from accidentally deleting work.

  • Deleted Items from External HD Not Appearing in Trash

    I have an iomega external hard drive and have had recent issues trying to trash deleted items.
    I delete the items and they are removed from the hard drive, but they do not appear in the trash and therefore are unable to be "trashed" so that space is freed up.
    I did some research and found that this is most likely an issue with ghost files still present on my external.  Through use of the Terminal, I made hidden files appear on my external, but I was unable to re-delete the items that I had previously deleted/was not even able to find the items I had previously deleted.
    Any help would be greatly appreciated.  As mentioned earier, this problem just surfaced.
    Thanks.

    I am having the exact same problem with my external, which is used as my iTunes library storage.
    When I delete things from iTunes, and select "move to trash", the files do not appear in the trash, as they used to.
    The trash stays empty (as in, no items are visible, even though I just deleted things).
    Oddly enough, after a restart, the files will appear, and thus are able to be trashed.
    Obviously, I do not want to have to restart every time to do this.
    I looked through the other thread, and nothing helped.
    Still looking for some answers!

  • How to delete deleted images from external HD?

    I have an Aperture vault on an external HD.
    I've noticed that when you delete files from your library, a folder is created on the external HD with the deleted files. The name of the folder is "Vault Name Deleted Images".
    When I delete these files it's because I don't want them any longer and to free some space on the external HD, so keeping them in this folder is not necessary. Is it ok to just delete this folder or is there a better and safer way to do this?
    Thanks!

    Unfortunately I can't find any folder called "deleted images" in Aperture, or anywhere through Finder.
    I would like to delete pictures from my hard drive when I delete them from Aperture's library. Is that possible?
    So far command-delete only removes them from the library.
    Thanks so much!

  • Ajax postback from external interface

    Hi I need some help
    I wanna be able to call a Javascript funktion which triggers an ajax postback, but when I call the function from flash with an external interface the page reloads in IE, not in FF or Chrome.
    If I make a button outside flash which triggers the button and then the postback everything works fine. 
    Hope someone can help me with this one, cause im kinda stuck. 
    A sample of the problem can be viewed at flashproblem.dev.akopa.dk/

    Screenath,
    You need to setup the replication from R/3 to CRM to be able to do this. So external numbering in CRM with a different number range. Follow th best practice for master data, that should help.
    Best regards,
    Pascal.

  • Can't delete file from external hard drive

    Hi,
    There is a permition problem with my external hard drive (no time mashine on it!) - can't delete certain files.
    I copied my documents on my external hard drive from previous computer with windows and later with linux system on it and there had been changed icons at certain folders previously. I mention this, becouse what linux did was that it locked the changed icon files and I couldn't delete them until I unlocked them manually. But at least it showed me that i don't have permition and i could change it. Well, now I mounted the disk on my new macbook and wanted to delete some files and it seems that there is the same problem with permition, at least it seems to happen with the same files. When I want to delete them, the system asks me for admin password, I give it allright, it makes the sound as if the folder was moved to trash but that's all. the folder is still there even after dismounting and restarting. I already checked the permitions and it says in the info that i can read and write with the file so it looks as if my rights were ok...
    Please help, I desperatly need more space for new backup and can't get rid of the files I don't need any more...
    Thank you for any sort of simple-ish advice
    Message was edited by: brevon

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Deleting photos from external drive when referenced (not copied) to iPhoto

    Hi, I've seen similar posts, but none of them really answers my question.
    I have an external NAS drive with RAID, where I keep ALL my data, because I use number of ways to access them. I also have my photos there. I recently bouht MAC MINI and I want to use it to organise my photos. Because I have only 80G drive on MAC, I choose to import the photos from the external drive to iPhoto, NOT copying them to it's own library but rather referencing them only.
    Now the question I have - When I delete a photo in iPhoto by putting it to Trash and then empty the trash, the file still stays on the external drive, although it disapperas from iPhoto library. This is uselesss to me, because I WANT the file to be deleted from the external drive (orginizaing the files, right?).
    The only way I found I can do this is clicking on the file in iPhoto, selecting "find file on disk" then deleting the file from disk, then deleting from iPhoto, one by one. That is no way to do it, I would rather use Picasa instead, although I like iPhoto more, I think it is superior in almost everything else.
    One more question: is there a way to see a list of directories imported to iPhoto?
    thanks,
    J.

    J.
    What I need is to delete the file when I "look" at it,
    Use a File Organiser. That’s what they are for, organising files. Other than that, if you’re using a database application such as iPhoto then you have to use the application to manipulate the data.
    You ask a question:
    But I am still wondering why isn't there any setup option to actually allow iPhoto to delete referenced files.
    and the answer
    I know it may cause some problems for some user,
    iPhoto is firmly focussed on the home user with a point and shoot camera. It’s very effective at what to does, but it does very simple things. Any setting that could lead to inadvertent data loss is avoided. (There are occasional posts on the forum from folks who uncheck that ‘Copy Files to Library on Import‘ setting but who then don’t actually move the files from the camera. They wonder why iPhoto has “lost their photos“.)
    You mention that you’re using the NAS so that access your photos in a number of ways. IF you can tell us what ways you use, perhaps we can help.
    I just need to know which directories I imported to iPhoto.
    How are these directories organised? Named?
    Regards
    TD

  • Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

    I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport.  I've been using the passport for about a year now without any problems on older Macbooks in my house.  I used to be able to read and write to this drive no problem.  I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive.  When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem.  If I try to delete that folder I just created, I get this error:
    The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
    (Error code -36)
    The folder has nothing in it whatsoever.  I just created it.  But if I go to Terminal and I run
    rm -rf "untitled folder"
    This works fine.  Why is Terminal acting different than Finder?  This does not happen on my other Macbooks.  Thanks in advance.

    Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

  • Not able to delete file from external hard disk

    I connected my external hard disk to my macbook pro. But am not able to delete any file since it says the file cannot be deleted when I move it to trash. Could you let me know how to delete a file from the external hard disk?

    How is your HDD formatted? NTFS? FAT?
    Did you write files with rights? When you strike +I on any file, you can see its rights; if you're read-only, you may change your file's rights.

  • Can't delete files from external hard drive

    So here's an interesting problem that I've never run across. I have a Western Digital hard drive plugged in and I was deleting some files off it today when suddenly it started saying that there were some files in use and it couldn't delete those. I hit "Continue" which usually does the trick but it just deleted everything else and left a bunch of folders with these weird empty files in them. So I quit all programs and tried again. Same thing, "Cannot delete, file in use." Tried rebooting both my computer and the external, again "Files in use." Did a google search, followed numerous suggestions, terminal sudo rm -r +file name, a force delete app, secure delete, holding down the option button while deleting... No dice. When I try the sudo rm thing in terminal it tells me that the folder doesn't exist AND that it isn't empty and won't delete it. (I love computers) When I do a right click->Get info on it, it says that I have read-write permissions but that the files are locked but won't let me unlock them (I'm the system administrator). When I look at the files in finder, it says they're actually aliases. What's really weird is that the file names are all messed up and have asian characters and stuff in them. I didn't create these aliases or have files with those characters in them. Soooo... Any suggestions? Cause I've read the threads and tried just about everything. I'm concerned this drive is headed for a crash or maybe just needs to be wiped and then put my stuff back on cause it's gotten errors over time. I don't know, I've never had this happen before and I'm pretty good with computers. If it was a windows computer I'd be doing a scan disk and defrag on it but I don't know how to do that on a mac to an external hard drive. I honestly don't know if this is a hardware or software problem. Any help would be appreciated.

    Oh... well  this is interesting... disk utility is say that it IS formatted MS-DOS (FAT32). Is that what's causing these errors? This thing has been running with my mac beautifully for years. So do I pull my stuff off, wipe it and reformat it for a mac? Or since it is FAT 32 can I hook it up to a windows computer and fix the problem? Since I had the wrong format, I can delete the files but if I don't fix the format this will keep happening?
    Volume repair reported:
    Verify and Repair volume “750GBEXT”
    ** /dev/disk1s1
    ** Phase 1 - Preparing FAT
    ** Phase 2 - Checking Directories
    /.../SpryAssets/_NOTES has entries after end of directory
    Truncate? yes
    /..../My Work has entries after end of directory
    Truncate? yes
    ** Phase 3 - Checking for Orphan Clusters
    95906 files, 181003968 KiB free (5656374 clusters)
    ***** FILE SYSTEM WAS MODIFIED *****
    Volume repair complete.Updating boot support partitions for the volume as required.
    And thanks!

  • Cannot delete files from external HD error code-50

    I keep getting error code-50 when trying to delete a file from my external HD (western digital).  I've restarted everything, it is not a special character problem.  I have been using this HD for about a year and this problem just recently started.  Also I cannot run disk utility verify because the HD does not show up in disk utility.  Not sure if it ever did but I never had problems until now.

    beecazz wrote:
    Also I cannot run disk utility verify because the HD does not show up in disk utility.
    That sounds like cause for concern, but I don't know whether it's connected with the -50 error.
    Do you have backup to restore from if things take a turn for the worse?
    For the deleting problem you could look at the following link. Trash It! seems to solve many Trash problems:
    http://www.thexlab.com/faqs/trash.html

  • Troubles deleting files from external hard drive!!

    I had my external hard drive plugged into my Macbook but i cannot delete any folder or file in it! There is not 'Move to Trash' option from the drop-down menu! Does this have anything to do with 'Folder Action' thing? please help! sorry i jst switched to Mac from Window recently so still trying to find my way through! Thanks

    Hi,
    Mac OSX can read and write/delete files and folders on harddisks that use the FAT32 file system.
    Mac OSX can only read and not write/delete files and folders on harddisks that use the NTFS file system.
    Use Disk Utility to check what file system your HD uses.
    To enable write access from OSX to NTFS drives, you can either use NTFS-3G http://www.ntfs-3g.org/ or buy Paragons NTFS for OSX http://www.paragon-software.com/home/ntfs-mac/
    Regards
    Stefan

  • How to delete files from external ntfs hard disk [Solved]

    Hi guys
    first, sorry for my bad English.
    I have an external hard disk ( WD 500GB ) with ntfs file system and i have installed ntfs-3g package.
    3 days ago, when i wanted to delete some files, i get a problem with it,
    look the output :
    [jahangir@Arch New Metal]$ sudo rm *
    [sudo] password for jahangir:
    rm: cannot remove '02 - Korn - Love and Meth.mp3': No such file or directory
    rm: cannot remove '30Seconds To Mars': No such file or directory
    rm: cannot remove '30Seconds To Mars 1': Is a directory
    rm: cannot remove 'Avantasia': No such file or directory
    rm: cannot remove 'Avantasia 1': Is a directory
    rm: cannot remove 'Avantasia 2': Is a directory
    rm: cannot remove 'Behemoth': No such file or directory
    rm: cannot remove 'Behemoth 1': Is a directory
    rm: cannot remove 'Hanging Garden - At Every Door - 2013': No such file or directory
    rm: cannot remove 'Hanging Garden - At Every Door - 2014': No such file or directory
    rm: cannot remove 'Rosetta': No such file or directory
    rm: cannot remove 'Rosetta 1': No such file or directory
    rm: cannot remove 'Sepultura': No such file or directory
    rm: cannot remove 'Sepultura 1': No such file or directory
    rm: cannot remove 'Slipknot': No such file or directory
    rm: cannot remove 'Slipknot 1': No such file or directory
    rm: cannot remove 'Tokio Hotel': No such file or directory
    rm: cannot remove 'Tokio Hotel 1': No such file or directory
    rm: cannot remove 'T\303\275r': No such file or directory
    rm: cannot remove 'neww': No such file or directory
    [jahangir@Arch New Metal]$
    Who can help me ?
    I wanted to delete .trash-1000 file from my main directory hard dist and i confront with this error :
    [jahangir@Arch My Passport]$ sudo rm .Trash-1000
    [sudo] password for jahangir:
    rm: cannot remove '.Trash-1000': No such file or directory
    [jahangir@Arch My Passport]$
    In the event that it is there.
    also in main directory of my hard disk i have 1 mp3 file that i can't view it in file manager and it will be displayed in Windows OS and with ls command in terminal :
    [jahangir@Arch My Passport]$ ls
    ls: cannot access 01 - Lost.mp3: No such file or directory
    ls: cannot access 02 - Surrendered To The Decadence.mp3: No such file or directory
    01 - Lost.mp3 In The Name Of God Videos ZzZ - IMAN winold
    02 - Surrendered To The Decadence.mp3 New Metal World of Warcraft Cataclysm 4.3.4 enGB navid wow wrath
    [jahangir@Arch My Passport]$
    what is this file and how can i delete .Trash-1000 and this files and content of "New Metal" directory ?
    Last edited by jiros (2013-12-23 20:57:05)

    I believe you used ntfs for a reason. As far as I know, Windows isn't friendly with hdd filesystems others than fat or ntfs, so once you format your external harddrive to ext4, windows won't talk to it at all, unless you install some additional driver or software.
    You have several possibilities to do:
    1) You could use FAT32, it's kind of a dumb filesystem, linux, mac and windows can read and write to it, there are some limitations like file permisions or 4GB file size limit.
    2) You could make multiple partitions on your external harddrive, one with ntfs (for windows) and the other with some fs that is support natively in Linux and Mac, I believe only option would be HFS+. I'm not an expert, maybe somebody will correct me. Anyway, if you aren't going to connect your disk to Mac, than ext4 would be a good choice. But this approach with two different partions is kind of dumb, because usually you need the same data available on whatever platform.
    3) If I were you, I would continue using NTFS or FAT32. It's not ideal, but it's a price you have to pay for dealing with Windows systems.
    4) If there is any other smarter solution, I believe somebody will add it to responses bellow.
    Anyway, it's weird that your problem persists. There has to be something wrong with your filesystem, otherwise ls wouldn't show you question marks in its output. Did you perform chkdisk via GUI? It has to say that either there wasn't any error with your fs, or that there was some error. We live (unfortunatelly) in binary computer world. I mean you can perform that command from shell, or however microsoft calls it, and if you run it in a proper configuration, it will tell you whether your fs is bad or not and perform needed repairs.
    And how to format disk to ext4?
    Backup your data, run as root fdisk /dev/yourexthdd (fdisk /dev/sdd), delete all partitions, create new ones, once you are done, write changes down. fdisk is pretty easy to use, don't be afraid of it. Then you have to create filesystem on each partition you created with fdisk, so if you created only one, run mkfs.ext4 /dev/yourexthddwithpartnumber (mkfs.ext4 /dev/sdd1). There are nice articles about doing these things on Arch Wiki (https://wiki.archlinux.org/index.php/File_Systems), don't be worried to read them

  • How do i retrieve deleted data from external hard drive

    I accidentally erased all my data from my external hard drive. Data included pictures, documents and movies. They are so important to me! Is there any possiblity for me to retrieve the files?!

    So you deleted all the files and then emptied the trash already with them in there? Are they backed up anywhere for you to restore from?
    There are 3rd party data recovery programs you can buy to try and restore the data, the success of the program recovering everything is not 100% and the program's success is decreased if you continued to write to the hard drive (by adding content) after the mass purge.
    I've used Prosoft Data Rescue 3 with success in the past - http://www.prosofteng.com/products/data_rescue.php
    You can find it for as low as $75 on the 'net if you shop around. To put it into perspective, data recovery service will run you (potentially) 7-10x more.

Maybe you are looking for

  • [Solved] 1366x768 Resolution with nVidia drivers

    I am trying to set up my monitor at full resolution (1366x768) and I am having issues getting it to display correctly. Out of the box, I was able to get 1024x768, but when I tried to manually set the full resolution using xrandr, it will only go up t

  • Read a text file before knowing the encoding

    Hi, I've wrote a AppleScript to adjust time delay of *.lrc file(txt file but different extension).I only got a messed up text, in other aspect, it works well. I understand applescript read the text file using the wrong encoding, but I can't just set

  • Speedtouch USB modem not working on MAC OS X(10.4.6) but fine on windows BC

    Hi all, i have speedtouch usb, which is almost the equivalent to speedtouch 330. i went on to http://www.thomson-broadband.co.uk/codepages/content3.asp?c=7&ProductID=471 to obtain the driver for mac os 10.4. however, even after installing the driver,

  • M-audio stops working with Logic Pro as soon as I hit play

    I've not found a solution to this anywhere. I've got Logic Pro 9 and hooked up a M-Audio Oxygen 49. The computer and software see the Oxygen okay and I can play any sound I want through the software. Until I hit play - trying to add a track to a reco

  • IT0022 Education- Is there a Standard work flow for ESS??

    Hello All, is there a standard work flow in SAP where in an employee updates his education details in ESS and a work flow is triggered either to Adminstrator / Manager to approve the same? if aint...how to make this possible, anyworkarounds? if yes,