Delete level sizes - Zebra printer
Ok, so, thanks to Snow Leopard being unable to save paper size preferences, is there a way to go in and delete other sizes from the preferences? We just installed a Zebra printer and we need to print to 2.25"x4.00" and instead of having to pick that every time, I just want to delete the other options.... Help? Thanks!
audiedoggie wrote:
Snow Leopard being unable to save paper size preferences
Explain.
Similar Messages
-
Not printing the label in the zebra printer for 4 X 7 inch size
Dear all,
Iam trying to print the barcode in the label of size 4.00 X 7.00 inche in smartforms , for which i have created a page format in SPAD with 4 x 7 inch and specified the same in Form interface and specified 4.00 x 6.00 inche in the MainWindow of smarforms,
im getting the print preview ,but it is not printing it in the printer, i checked with the zebra printer set up also and in the printing preferences i gave it as user defined.
but when i tried with page size of 4.00 x 6.00 , it is printing without any problem. but my requirement i need to print that in 4.00 x 7.00.
Can anybody guide me how to resolve this.
thanks in advance. Points assured.sorted out by setting the SPAD - Device types
format, just added the zxxx format to this and now it is working -
TSC or ZM400 (Zebra Printer) printing speed?
Dear Folks,
I am using TSC or ZM400 (Zebra Printer) for label printing but I have one issue.
I am printing the sticker and its getting but the speed of printing is very slow . Its creating spool request for evey label.
Even I deleted spool request one after other in user profile but did not get the right speed.
Any body have any idea how to increase printing speed . I am printing bulk of data (1000 sticker).
Thanks and Regards
GurminderHi,
Do you use any graphics or true type fonts in your form that creates the spool? if you use graphics, ensure that the flag "Resides in the Printer Memory" is set for the graphic in transaction SE78. Also try to avoid true type fonts as this increases the size of the spool transferred from SAP to the printer greatly.
If you want to ensure that spools are appeded, you need to ensure that parameters 'New Spool Request' and ''Completed' are not set as per SAP note #85318.
For Sapscript forms, when your application calls the function module OPEN_FORM, the parameters the parameters ITCPO-TDNEWID and ITCPO-TDFINAL should not be filled when calling function module OPEN_FORM. Then the spools should be appended.
Regards,
Aidan -
Increase print rate, print speed zebra printer (zpl)
Hello,
first I start with release info:
SAP system N22 (only ABAP system), which calls Adobe Form processing
Windows 2008 SP1
Oracle 11
SAP ECC 6.0
SAPKB70103
SAPKH60403
SAP ADS system AD0 (only Java system):
Windows 2003 SP2
Oracle 10
SAP Netweaver 7.0 Java with Enhancement Package 1
Versioninformation given by report FP_PDF_TEST_00: 802.20090618120017.572641
We use a ordinary Zebra printer with internal print server (ZM400-200E-0100T).
In N22 there is an output device defined with device type "AZPL203 : ZPL203 for pdf documents only".
Printing works but print speed/rate is always lowest (2 Inch/s) and I find no SAP-way changing it. (Why SAP does not give maxmimum speed in zpl?)
Lowest speed in ZPL-code is represented by ^PRA . I find this string:
- in spool files on N22 (example: SPOOL0000014926_00001.zpl)
- in xdc file on AD0: E:\usr\sap\AD0\SYS\global\AdobeDocumentServices\lib\zpl203.xdc, line: "<seq id="startDoc">XA
PRALH0,3
XZ
</seq>"
Changing the string in that file does not work. Creating a complete new output device in N22 with new xdc file zzpl203.xdc does not work too.
Another way of changing print speed is described in the documentation "SAP Interactive Forms by Adobe, customizing Printing Workflows, (SAP NetWeaver 7.0 SPS13 or higher), Document Version 2.0 - August 2007". In chapter 4.3 "Changing the print speed setting" is described a job profile named ZPLSettings.xml, which should be used. In that file I do not find printRate.
Who can help?
Kind Regards
Walter HabichHi Ale,
You dont need a Zebra bar one tool for printing graphics from smartforms. You need to have propers drivers and proper settings in place. Take a look at the OSS notes 750772 - Information on the ZPL-II printer driver for SmartForms
Check the point 5 in the above oss notes:
5) Support of bitmap graphics
Colored bitmap graphics from SmartForms are changed to black and white when you print from the LZPL printer driver. If the picture quality is affected by this conversion, change the graphic to B/W with a graphics program (such as PaintShop Pro), and import it to SmartForms as as a black and white graphic. Monochrome graphics are not converted by the driver. However, all graphics may be justified to adjust the size of the graphic to the printer resolution (203, 300 or 600 dpi).
During the import to SmartForms, you have the option to flag a bitmap as "resident". In this case, the LZPL printer driver saves the graphic in the RAM of the printer when it first occurs (Device "R:" of the zebra printer). At the end of the spool request, the driver deletes the graphic again from the printer's RAM, so that no more memory remains occupied.
Resident graphics during label printing from SmartForms are therefore only faster if more than one label is printed within a spool request, and the resident graphic is repeated on each label.
I hope this info helps.
VJ -
When will there be fix for AirPrint? Since upgrading to Yosemite I cannot print from my MacBook Air which I use mostly. (I can print from the my old 2005 G5 desktop and iPad2 just fine on the same network.) I could print just fine when I had Mavericks. I have tried EVERYTHING under the sun: resetting print system, deleting and adding the printer, checking for updates, uninstalling and reinstalling printer software and folders, turning off modem, router etc. NOTHING works.
The laptop shows that it is printing but nothing happens. Then it says it cannot locate the printer or there is a broken pipe. But it does tell me that I have a low level in one of the ink cartridges (which is true.)
Help! I have warned everyone I know not to upgrade. Is there a way to go back to Mavericks?
MacBook Air (mid 2012), OS 10.10, HP Officejet 7500aThis is what appeared on Console:
11/12/14 12:42:32.558 PM com.apple.preference.printfax.remoteservice[3099]: <NSViewServiceMarshal: 0x7fa398514bd0> failed to complete rights grant 6B212CA9-7872-4726-BA05-68BD5C994479 due to 3
timestamp: 12:42:32.557 Wednesday 12 November 2014
process/thread/queue: com.apple.preference.printfax.remoteservice (3099) / 0x7fff78cb4300 / com.apple.main-thread
code: line 834 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in -[NSViewServiceMarshal invalidateWindowRights]
#exceptions
11/12/14 12:42:32.598 PM com.apple.xpc.launchd[1]: (com.apple.preference.printfax.remoteservice[3099]) Service exited due to signal: Killed: 9
11/12/14 12:42:37.845 PM com.apple.appkit.xpc.openAndSavePanelService[3298]: assertion failed: 14A389: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
11/12/14 12:42:37.879 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/CONM 136 - Study Guide Test 3 (2014).docx
11/12/14 12:42:37.971 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:38.033 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.712 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.000 PM kernel[0]: Sandbox: Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.748 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.850 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/12%20angry%20men.docx
11/12/14 12:42:39.874 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:39.945 PM sandboxd[246]: ([3295]) Pages(3295) deny file-read-data /Users/Mom/Downloads/Quiz%20#2.docx
11/12/14 12:42:41.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:42:48.968 PM WindowServer[132]: WSGetSurfaceInWindow : Invalid surface 702894100 for window 1378
11/12/14 12:43:17.000 PM kernel[0]: Sandbox: storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:43:23.225 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[3316]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
11/12/14 12:43:24.355 PM WindowServer[132]: disable_update_timeout: UI updates were forcibly disabled by application "PrinterProxy" for over 1.00 seconds. Server has re-enabled them.
11/12/14 12:43:24.946 PM WindowServer[132]: common_reenable_update: UI updates were finally reenabled by application "PrinterProxy" after 1.59 seconds (server forcibly re-enabled them after 1.00 seconds)
11/12/14 12:43:34.503 PM mdworker[3319]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.514 PM mdworker[3320]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:43:34.604 PM mdworker[3318]: code validation failed in the process of getting signing information: Error Domain=NSOSStatusErrorDomain Code=-67062 "The operation couldn’t be completed. (OSStatus error -67062.)"
11/12/14 12:44:38.628 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
11/12/14 12:44:41.384 PM locationd[63]: Location icon should now be in state 'Active'
11/12/14 12:44:44.653 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:44.793 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:45.149 PM sandboxd[246]: ([375]) com.apple.metada(375) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
11/12/14 12:44:56.515 PM Console[3327]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
11/12/14 12:44:56.641 PM locationd[63]: Location icon should now be in state 'Inactive'
11/12/14 12:44:56.834 PM sandboxd[246]: ([3051]) storeuid(3051) deny mach-lookup com.apple.dock.server
Not sure what any of this means. -
Crystal Reports 2008 and printing with Zebra printer issue
Hello,
Since we have upgraded the reports from XI to 2008, the reports are not printing well in the Zebra printers.
The report gets shrunk to half the size.
Is there something that needs to be done after the upgrade?
Thanks in advanceBoth, install it on your PC first and test. If all is well then build or use the various deployment packages available from our download site.
You may want to test this with a few reports also. Open the report and check off use Default printer and test other printer options. I don't know what options the QA team were using so it's best for you to test. If you don't have a Zebra printer ask one of your customers to do some testing for you.
According to Zebra Developers all their drivers are based on the same code so they should all work the same. Once you have one working they all should work using the same options.
Thank you
Don -
Printing sapscript label using zebra printer
Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer Reason
*1
DATA: BEGIN OF print_infos.
INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
mseg-mblnr print_infos-tdcovtitle
INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
ind_beg := 15.
WHILE ind_beg > -1.
char1 := tnapr-fonam+ind_beg. " substr(tnapr-fonam,ind_beg,1)
IF char1 = '_'.
form_name := tnapr-fonam(ind_beg).
CONCATENATE form_name '_ZP' INTO tnapr-fonam.
EXIT.
ENDIF.
ind_beg := ind_beg - 1.
ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
form = tnapr-fonam
dialog = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
IF syst-tcode = 'MB90'.
yzzm_gr_quantity-erfmg := mseg-menge.
ELSE.
yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
ENDIF.
yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
AND zeile = mseg-zeile
AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
AND charg = mseg-charg.
ENDFORM. "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
CLEAR t300.
SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
CASE mseg-werks.
WHEN 'BUP'.
t300-regkz := 'US '.
ENDCASE.
ENDIF.
CLEAR mgef.
SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
AND regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
IF tnapr-kschl = 'YNL7'.
zw = position * '0.2' + '0.1'. pos = zw.
ELSE.
zw = position * '1.3' + '0.1'. pos = zw.
ENDIF.
IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
aux_value := count_haz_sym.
ELSE.
aux_value := pos. " HP/Kyocera or other laser printer
ENDIF.
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&XPOS&'
value = aux_value
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element =
window = 'MAIN'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
OTHERS = 7.
IF sy-subrc = 0.
*Varying the position for YNL7
IF tnapr-kschl = 'YNL7'.
position = position + 2.
ELSE.
position = position + 1.
ENDIF.
ENDIF.
ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
am07m-litxt = text-101.
am07m-libzg = ekko-reswk.
ELSE.
am07m-litxt = text-100.
am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
am07m-hdlne = text-020.
ELSE.
am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
AND weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "GR_label_print
*& Form lesen
text
-->OBJKY text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL. "Versandvorschriften lesen.
PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
ekpo-weunb IS INITIAL.
PERFORM kontierung_lesen. "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
PERFORM lesen_htn.
ELSE. "111277/PH
CLEAR am07m-mfrpn. "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
mseg-menge = mseg-bpmng.
mseg-meins = mseg-bprme.
PERFORM bestelltext_lesen.
CLEAR mabdr.
ELSE.
PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ELSE.
mseg-menge = mseg-erfmg.
mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM. "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM. "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
dialog = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM. "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = itcpo
form = tnapr-fonam
dialog = ' '.
x_open = x.
ENDFORM. "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM. "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
*mkpf = mkpf.
*mseg-lgort = mseg-lgort.
*ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
*t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
*ekko = ekko.
*am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
*t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
*mkpf-usnam = old_mkpf.
*mkpf-mblnr = old_mblnr.
*mkpf-cpudt = old_cpudt.
*mkpf-budat = old_budat.
*mseg-ematn = old_ematn.
*mseg-lgort = old_lgort.
*ladr = old_ladr.
*t001w-werks = old_werks.
*t001w-name1 = old_name1.
*t024-eknam = old_eknam.
*t024-ektel = old_ektel.
*ekko-lifnr = old_lifnr.
*ekko-ebeln = old_ebeln.
*ekko-ekgrp = old_ekgrp.
*am07m-name1 = old_linam.
*am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
lfa1 = old_lfa1.
ENDIF.
ENDFORM. "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1 = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
*mkpf-usnam = save_mkpf.
*mkpf-mblnr = save_mblnr.
*mkpf-budat = save_budat.
*mkpf-cpudt = save_cpudt.
*mseg-ematn = save_ematn.
*mseg-lgort = save_lgort.
*ladr = save_ladr.
*t001w-werks = save_werks.
*t001w-name1 = save_name1.
*t024-eknam = save_eknam.
*t024-ektel = save_ektel.
*ekko-lifnr = save_lifnr.
*ekko-ebeln = save_ebeln.
*ekko-ekgrp = save_ekgrp.
*am07m-name1 = save_linam.
*am07m-name2 = save_lina2.
ENDFORM. "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
AND mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
AND zeile = nast_key-zeile
AND mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
retco = sy-subrc.
EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
PERFORM read_address.
ENDON.
ENDFORM. "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
itcpo-tdpreview = 'X'.
itcpo-tdnoprint = 'X'.
ELSE.
CLEAR: itcpo-tdpreview,
itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover = nast-tdocover.
itcpo-tddest = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid = x.
ENDFORM. "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA: BEGIN OF addr_sel.
INCLUDE STRUCTURE addr1_sel.
DATA: END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
AND lgort = mseg-lgort
AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
EXPORTING
address_selection = addr_sel
IMPORTING
sadr = ladr
EXCEPTIONS
OTHERS = 1.
ENDFORM. "ladr_lesen
**& Form REPRINT
text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
x = 'REPRINT'.
ENDIF.
*ENDFORM. "REPRINT
Kindly do the needful.
Thanks in advance
Regards
SwarnaHi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks. -
Limited size in printing labels
Hello everybody,
We are trying to print labels, which are created from smartforms, to Zebra S4m (203 dpi). We use Host Spool Access Method C (Direct Operating System Call). Everything prints fine, but we are limited with the size of the printed document. The limit is only 644 KB. There is no error message in SAP queue or in Zebra printer when we exceeded this limit. But it prints a lower amount of labels than we need. We don't know whether the problem is in SAP system or in the printer. Is there any posibility to split the printing task?
JanHello Jan,
could you pls let me know which device type are you using?
Also are you printing the label with sapscript or smartform?
Where you see the size limitation?
Can you test if you can print more size if you are using the access method G
from the frontend client PC to you zebra printer?
Regards
Jie Bai -
SAP Script : Control Commands for printing Label (barcode) by Zebra Printer
Hello,
I would like to know the control commands in sap script for Zebra Printer. The purpose of task is to print a field in barcode format in Right Bottom of the label.
The sample code is placed below. Kindly have a look at it. The problem now i am facing is, the barcode for Customer PO is printing on the wrong place (Left Bottom, the text & barcode are overwriting). Can anyone suggest a possible way or can any one send the document for Barcode commands in SAP Script for Zebra Printer.
Sample script code:
Initialization and reset Barcode
XAMCY^XZ
Start
^XA
Barcode setup
^BY3,2.7,2.2
Set label home position
^LH
^FWN
FO385,025A0R,40,50FDPN: &VBAP-MATNR&FS
FO385,725A0R,40,50FD&VBAP-ARKTX&FS
FO385,1710A0R,40,50FDRtns: &zsntsc-contr&FS
FO345,025A0R,40,50FDService Order# &AUFK-AUFNR&FS
FO345,725A0R,40,50FDSerial# &EQUI-SERNR&FS
FO345,1710A0R,40,50FDRepair Order# &VBAP-VBELN&FS
FO245,025B3R,N,90,N,NFD&AUFK-AUFNR&FS
FO245,725B3R,N,90,N,NFD&EQUI-SERNR&FS
FO245,1710B3R,N,90,N,NFD&VBAP-VBELN&FS
FO138,1710A0R,40,35FDCustomer PO# &VBKD-BSTKD&FS
FO98,025A0R,40,50FDWrnty: &W_WARRANTY&FS
FO98,605A0R,40,50FDRoute: &W_ROUTE&FS
FO58,025A0R,40,35FDShip-to-name: &W_NAME1&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO58,1325A0R,40,35FDMinor Group/Nr: &TVM5T-BEZEI&FS
FO18,885A0R,40,35FDReported By: &QMEL-QMNAM&FS
FO18,1710B3R,N,90,N,NFD&VBKD-BSTKD&FS
^XZ
Thanks in Advance,
RamasamyHI
GOOD
GO THROUGH THIS
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
GO THROUGH THESE LINKS
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm
THANKS
MRUTYUN -
Logo printing on label output from Zebra printer
Hi guru, I am new to zpl command and I cannot find out how SAP is compiling the logo object and load into SAPSCRIPT. Bascially, our company is using zebra printer to print out receiving label with logo on it. There is a requirement to change the logo. What should be the steps?
The transaction I was told to use is OMCF. I can see the precompile file path/name is listed in each label text object. Something list C:\BARONER3\Logos\logo1.bmp or C:\Logos\logo2.bmp. If I need to change a new bmp file for the logo, how should I do it?
Also, is there any good documentation about BAR-ONE and ZPL command?
According to SAP help, the label design is done in BAR-ONE then the print file is downloaded as .ITF format and import into SAPscript as standard text using SO10. However, I cannot find any standard text in SO10 which have the same text ID and text name as in OMCF -> Text Object.....what is the connection between the Standard text and the OMCF text object?
Any advise on the details step to how to create a simple logo/barcode label using BAR-ONE and SAP is greatly appreciated.
Thank you.
MinamiHi Minami,
Please check the transaction SE 78 here you can upload new logo or pic with some retriction on size compnay logo should not be a problem.Then you can change the logo.I think this link might be of use to you.I am sending you link
[SAP LOGO|Logo in sapScript;.
For SAP Barcode Documentation Please refer this SAP Library Link:
[Barcode|http://help.sap.com/saphelp_nw04/helpdata/en/68/4a0d5b74110d44b1b88d9b6aa1315b/content.htm]
Have a best day ahead. -
Unable to get the print from the zebra printer
hi,
i have copied a SAP standard form into a Zform. i have made changes to the Zform depending on my requirement(i.e. i have added more fields and also barcodes). I did not make any changes to the driver program since i copied the standard layout. After making changes to the Zform when i check the print preview everything seems to be fine. But when i try to print the Zform from a zebra printer it does not get printed. But it says printing is completed and also a spool request is created but the print never comesHi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna -
Communication problem with Zebra printer
Post Author: rafu
CA Forum: .NET
Hi,I'm trying to write bidirectional communication with Zebra printer - e.g. send data to print and receive data read from tags. To send data it's possible to use WritePrinter methods described in internet, however I don't know how to get it?? In producer's manuals there is only example to printer connected by LPT1, my uses usb.Does anyone have any ideas??? Help please!rafuI would look at XP's port configuration for the printer and then try and use the same protocol on the Mac. If XP is showing it as RAW Port 9100, then that is shown as HP jet Direct - Socket on the Mac. The only issue then is whether the OS X driver is available in the Lexmark list. Sometimes the provided OS X driver is only for direct USB connections, so you have to look at using an alternate driver, such as those offered by Gutenprint.
-
Hi All
I am using zebra printer TLP 2844, all the fonts are feeded in the printer.
I am printing a simple text.. but its not printing anything.
REPORT ZTEST2 .
data: x-prin(4) value 'LOCL'.
data:
t1(80) value 'A100,100,0,d,1,1,N,"Material Number"'.
do 1 times.
new-page print on
destination x-prin
copies '1'
immediately 'X'
keep in spool 'X'
no dialog.
write: / 'O'.
write: / 'Q1217,1'.
write: / 'q811'.
write: / 'S2'.
write: / 'D6'.
write: / 'ZB'.
write: / 'JF'.
write: / 'N'.
write: / t1.
enddo.
any idea what can be the reason
cheers
AJHi Pavan
As the SAP vesion is 4.6c...and they have no support package for printing using samrtforms.
but other reports, which prints the labels in the warehouse are printing the barcode labels....
and I am using the same printer........so definetly it should print.
but I dont know what mistake I am doing........
AJ -
A question on different zebra printer dpi printing - sapscript
Hello,
We have an existing sapsript (with ZPL code) to print label via a zebra printer (300dpi). There is a requirement to print
the same label on new device zebra QL 320 plus(wireless printer, 203 dpi).
Please advise how to make use of the existing sapscript to print to the wireless device without creating another sapscript(with different dpi).
existing 300dpi ZPL code in sapscript:
^FX
~DGR:ROHS.GRF,2222,22,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
^XA
^PRC
^LH0,0^FS
^LL610
^MD0
^MMT
^MNY
^LH0,0^FS
^FO32,20^A0N,45,45^CI13^FR^FDPART #: 60000001^FS
^BY2,3.0^FO36,66^BCN,56,N,Y,N^FR^FD>:60000002^FS20000001
^FO709,74^A0N,45,45^CI13^FR^FDMSD: 60000003^FS20000002
^FO32,137^A0N,36,36^CI13^FR^FD60000004^FS
^FO32,183^A0N,36,36^CI13^FR^FDMPN: 60000005^FS30000001
^BY2,3.0^FO36,222^BCN,56,N,N,N,A^FR^FD60000006^FS
^FO32,293^A0N,36,36^CI13^FR^FDBATCH NO: 60000007^FS
^BY2,3.0^FO36,330^BCN,56,N,Y,N^FR^FD>:60000008^FS3000000230000003
^FO460,293^A0N,36,36^CI13^FR^FDD/CODE: 60000009^FS
^BY2,3.0^FO461,330^BCN,56,N,Y,N^FR^FD>:60000010^FS30000004
^BY42,42^FO750,300^BXN,5,200,0,0,1^FH\^FD60000011^FS30000005
^FO200,517^A0N,36,36^CI13^FR^FDCOO: 60000012 ^FS
^BY2,3.0^FO36,500^BCN,56,N,Y,N^FR^FD>:60000013^FS
^FO500,460^A0N,36,36^CI13^FR^FDQTY: 60000014^FS
^BY2,3.0^FO500,500^BCN,56,N,Y,N^FR^FD>:60000015^FS
^FO32,399^A0N,36,36^CI13^FR^FDSAP Doc: 60000016^FS20000003
^FO500,399^A0N,36,36^CI13^FR^FDV/CODE: 60000017^FS20000004
^BY2,3.0^FO36,432^BCN,56,N,Y,N^FR^FD>:60000018^FS
^FO30,566^ABN,25,15^CI0^FR^FDDate RECEIVED: 60000019 ^FS
^FO520,566^ABN,25,15^CI13^FR^FDUser:60000020^FS20000005
^FO713,455^FR^XGRoHs,1,1^FS20000006
^FO0,282^GB931,0,2^FS
^FO0,126^GB931,0,2^FS
^FO0,172^GB931,0,2^FS
^FO0,390^GB931,0,2^FS
^FO0,558^GB931,0,2^FS
^XZ
^FX End of job
^FX END OF FORMATHi,
You should generate a new label file and upload it to a new sapscript form as described in note #179534.
Regards,
Aidan -
Label printing on ZEBRA printer TLP2844 with smartform
Hi Gurus,
Requirement:
Print label on Zebra printer with smartform
1. i have created a smartform with desired layout
2. and trying to print on Zebra printer
Questions:
1. smartform is not printing on zebra printer
2. suggest me if there are any ways to print smartform on zebra printer
3. does it requires any native programming language for printing labels on zebra printer
Best Regards,
Krishnahi Krishna,
This printer does not support ZPL2 so I thnk you cnnot use the device types like LZEB2. It should work to print via windows and a device type like SAPWIN or SWINCF.
Regards,
Aidan
Maybe you are looking for
-
I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help! == Ea
-
As a long time kde user I was bewildered by some of the things that hit me when I fired up kde4.4. To kick the changes off I was impressed by the new netbook setup which one call up seemlessly and which relies on the new search and launch activity: s
-
NotSerializableException when writing to disk
Hi, I am having a problem with simply writing an object to disk. Have a class called DataHolder which implements serializable. This class consists of about a dozen strings and nothing else: class DataHolder implements Serializable{ String a="abc"; St
-
Clearing up negative stock approach during month end
Dear all, I have a question with regards to how to clear up negative stock during month end. Currently our system allows negative stock due to our company process requirement. However, these negative stocks will need to clear-up by finance or warehou
-
hi! i'm using awm to build cube, when loading the measures from sales_fact view in the global demo of oracle, log hints "13:05:12 Finished Load of Measures: UNITS from Cube UNITS_CUBE.CUBE. Processed 0 Records. Rejected 222589 Records." i'm assure aw