Delete material bom from ECO.

Hi,
I need to delete material bom from eco .
thanks,
Aviva.

Hi
please check
CSAP_MAT_BOM_DELETE
FM to Delete material from BOM
Regards
Sujit

Similar Messages

  • DELETE MATERIAL PERMANENTLY FROM MATERIAL MASTER

    Dear All,
       I want to DELETE MATERIAL PERMANENTLY FROM MATERIAL MASTER it has stock but no open statement like po ,gr etc when i flag the material in t-code mm06 and filling all the recquirement field then enter then tick all recquirement field then save a warning message delection flag also change at lower level then enter it shows delection flag changed but this material is issued to cost center . pls explain me points must be rewarded.
    Amin

    hi ameen!
      u change the warning message into an error message in IMG>MATERIAL MANAGEMENT>INVEN>DEFINE ATTRIBUTES FOR SYSTEM MESSAGES. message no M7127.

  • Deleting Material Master from the tables

    Hello Gurus.
    We marked the materials master as deletion. But we want to remove from tables. Can any one please guide me
    Thanks
    JJ

    In a production system is NO OTHER WAY, only archiving.
    In a test system you can use MMDE, but keep in mind this erases the material from the material tables, but if a material was used e.g. in a purchase order, then this order will stay in your system.
    If you reuse the material number you will then have inconsitencies to old transactional data, which may be pretty disturbing for all others that do tests.

  • Cideon / Autocad 2007 / Material BOM Creation from autocad

    Hi,
    we are using Cideon integration for AutoCad 2007 & SAP ERP communication. DIR's in DMS are created from AutoCad drawings via SAP menu.
    We want to create Material & Material BOM from AutoCad but we cannot see any option present in SAP menu. We can just create Header Material from SAP menu in AutoCad, no BOM option. What steps should be taken to enable material & bom creation from AutoCad SAP menu.
    Thanks
    Edited by: Rob Burbank on Oct 22, 2010 3:56 PM

    Moderator message - Welcome to SCN
    Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
    In particular, offering points is against forum rules
    Rob

  • Plan/Actual cost for Deleted Material - reg

    Hello,
    Actually iam assigning one BOM to activicity.
    Now i have released the project,after this in cns41 plan and actual costs r flowing correctly.
    Now i have deleted that BOM from activity and saved the project also,
    now again in cns41 the same BOM cost was flowing in Planded data,
    pls give solution for this....
    --Prakash.

    Hi Manish,
    Thanks for ur support,
    but iam getting this error message,
    Typ Ite Message text                                                           LTxt
        000 The project info database reconstruction starts with: 1 Projects
        000 Processing is complete
    <b>   000 No value category could be determined for cost element 1000 50200000</b>
    this error was coming thg cjen
    --Prakash

  • Is it Possible to delete the configuration from a Material Variant?

    Hi,
    Can you delete the configuration from a Material Variant and then reconfigure the part in MM02?

    Hi
    Once we created variant we can't delete it,
    Regards,
    srihari

  • SCAT program for copying BOM from one material to another material??

    Hi Gurus,
    Tried creating SCAT program for copying BOM from one material to another material and founf that the copying function does not work.
    Please advise??
    Thank you.
    Naveen.

    HI Satish Ji,
    We are using version 6.0.
    We were able to create SCAT for creating new BOM but, for copying we are facing an issue.
    Kindly advice.
    Thank you.
    Naveen.

  • Missing raw material position (from BOM) in process order

    Hello to all,
    Please help me on my issue on missing raw material position (from BOM) in process order.
    On transaction CS11, for a particular formula/plant/BOM application, the BOM was produced.  It was found that this BOM has 20 positions (from 0010 to 0200). 
    Now, when the user proceed on the process order for this, the position 20 is missing into the order.  What checks should be needed to proceed on checking why the item is missing into the process order?
    Thanks.
    Regards,
    Patrick

    Patrick,
    The last check what i would suggest is to check the "Plant-Spl- material status" of the material in line item 0020. You have to check this using transaction "MM03" and in MPR1 - view.
    You can check the defination of the status in the customizing transaction "OMS4", here check under "Production Section".
    I definately think that there was a error message which should have popped up and ignored by the user due to this defination of the status.
    Regards,
    Prasobh

  • Steps for delete material from system

    hi , all sap pp experts
          in material master by using mm06 we give deletion flag for material but system can't delete that material. So is it possible to delete material from system? if yes then please tell the sequence for this process
    thanks in advance
    regards
    Nitin Nerkar

    Before Archiving the Material Master the materials need to be flagged for deletion in T Code MM06/MM16.
    Archiving the materials is done thro T Code SARA. All the SAP archive functions are shown in SARA. Choose the corresponding SAP archive object, hit enter and the archive administration menu will be shown.
    When a material is no longer required in a company or plant, you can archive and delete the material master record.
    Before a material master record can be archived and deleted, other objects (such as purchasing documents) that refer to this material must themselves be archived. You can see which objects these are and the dependencies between them in the network graphic.
    Archiving object MM_MATNR for archiving material master records.
    To archive the material master, first go to transaction SARA
    Type in a variant name and click Maintain. (Tick the Test Mode for archive simulation).
    Save the variant.
    Maintain the Start date and Spool parameters and click execute.
    Click Go to Job Overview to check the archive status.
    To do a permanent delete, click Delete button.
    Maintain the Archive Selection, Start date and Spool parameters.
    Click Test Session for testing or click execute to start the deletion program.
    Click Go to Job Overview to check the delete status.
    This need to be done carefully and better to first do it in testing client.
    After archiving those materials will not be displayed in reports unless categorically selected
    Note: SARA is a general transaction where you can archive all types of records using respective archiving object

  • Is there a transaction to delete an article (Material Number) from SAP?

    Hello SAPients!
    Does anybody know: Is there a transaction (or FM) to delete an article (material number from SAP ?
    Thanks!

    You can only flag the material for deletion.  You do this via MM02, or you can do it via BAPI_MATERIAL_SAVEDATA.  THe material can only be fully deleted when the archive process has been ran for the object.
    Regards,
    Rich Heilman

  • Permeant delete material from systeam

    hi gurus
    plz help me how to delete materail from the systeam.i want delate a material permentaly also names& stock.

    Hi,
    to delete material use t-code MM06.
    and if you want that material should not be used for any transaction then go-to MM03 enter material no. select 'Basic Data View 'in that there is a field called 'X-plant matl status'
    choose a valid value and just opposite to this field there is a field called 'Valid from' enter todays date in that field then from today your material will be blocked.
    otherwise if you want to delete a view from the material use t-code MM50 and if you want to delete all the materials from your client use t-code MMDE and to archive the material use t-code MM71
    below mention link will help you in understanding the archiving process.
    http://help.sap.com/saphelp_erp2005/helpdata/en/8d/3e59bc462a11d189000000e8323d3a/content.htm
    Regards,
    Archit

  • How do I delete all iCloud accounts from different places to consolidate them? Also one of the email addresses is locked so will the material bought from iTunes there be acceptable? Thanks.

    From the title of the above problems the iCloud accounts are on 2 PCs and one iPad2.

    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account").
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    You'll need to decide whether to keep info on the device or merge it at the appropriate time when prompted.

  • Fields of the material BOM are overwritten by values from customising.

    I have the an issue wherein I am trying to update a material BOM, and I pass a blank value to REL_COST (or SANKA ) in item. But somehow in the function module CSAP_MAT_BOM_MAINTAIN it gets defaulted to X while posting the BOM update.
    When I use the function module CSAP_MAT_BOM_CREATE to create BOM it works fine. I see there is OSS note 1012556, but looks like it is valid for different function module CDESK_BOM_WIZARD, which is relevant to my scenario. However that function module is for dialog mode and not released yet.
    I pass below values to T_STPO structure, rest all fields are initial.<br />
    <br />
    ITEM_CATEG                                              L<br />
    ITEM_NO                                         0020<br />
    COMPONENT                                               4000018468<br />
    COMP_QTY                                                          300.000<br />
    COMP_UNIT                                               EA<br />
    FIXED_QTY                                          <br />
    ITEM_TEXT1                                              TEST<br />
    ITEM_TEXT2                                              TEST<br />
    REL_COST<br />
    MAT_GROUP                                               241416W1<br />
    ID_ITM_CTG                                              L<br />
    ID_ITEM_NO                                              0020<br />
    ID_COMP                                         4000018468<br />
    <br />

    I have this same issue.
    I found a workaround, passing "!" instead of space when I want to reset fields such as cost relevancy, text1 and text2.  My issue is on CSAP_BOM_Maintain.
    So for your solution, you just call the same function 2x with same values?

  • How to change the header of Material BOM in a program for alternative BOM ?

    Requirement: An Inbound IDOC creates /change/delete Alternative Material BOM. The Alternative Material BOM can have alternative values from 1 to 99.
    ISSUE: I am good with CREATE and DELETE BOM. The issue is with CHANGE of header Material BOM. The fields which we need to change in the header is the base quantity, BOM status, Lot Size from and Lot Size to. Please note that I am able to change the item details of the BOM with FM CSAI_BOM_MAINTAIN. I find no FM /BAPI which would change the header of a material BOM.
    Please NOTE that I am using BAPI_MATERIAL_BOM_GROUP_CREATE to create alternative Material BOM. This has a parameter in TABLES called "VARIANTS" which has a field CS_FUNCTION which can have value from NEW/CHG/DEL .Also ,there is another parameter in TABLES called "ITEMASSIGNMENTS" which has a field CS_FUNCTION which can have value from NEW/CHG/DEL which implies this FM will allow us to change the BOM. But this does not work when I use it for CHANGE scenario with CHG value. I debugged this BAPI and observed it requires a STNLR(Bill of Material) value . This field is not there in any of the structure. I am not sure if I am passing the right parameters to it.
    Let me know if the parameters are passed correctly for CHANGE scenario.
    Also let me know if there is any other way(FM/BAPI)  to update the Header of the Material BOM ?
    Here is the code I am using:
    *& Report  ZTEST_S_E
    REPORT  ZTEST_S_E.
    * This code will create a material BoM for the material
    * MAINMATERIAL with the components COMPON1 and COMPON2.
    * Data Declaration
    DATA:
    it_bomgroup LIKE bapi1080_bgr_c OCCURS 0 WITH HEADER LINE,
    it_variants LIKE bapi1080_bom_c OCCURS 0 WITH HEADER LINE,
    it_items LIKE bapi1080_itm_c OCCURS 0 WITH HEADER LINE,
    it_matrel LIKE bapi1080_mbm_c OCCURS 0 WITH HEADER LINE,
    it_itemas LIKE bapi1080_rel_itm_bom_c OCCURS 0 WITH HEADER LINE,
    it_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    * Fill the data
    * Material BoM Group Header Data
    CLEAR it_bomgroup.
    it_bomgroup-bom_group_identification = 'BAPI_SMP_COL1'.
    it_bomgroup-object_type = 'BOM'.
    it_bomgroup-object_id = 'SIMPLE1'.
    it_bomgroup-bom_usage = '1'. " YOU COULD CHANGE THE BOM USAGE TO YOUR
    *NEEDS
    it_bomgroup-ltxt_lang = sy-langu.
    it_bomgroup-technical_type = ' '.
    it_bomgroup-bom_text = 'Simple BoM - FM'.
    APPEND it_bomgroup.
    * Header Details of the different variants
    CLEAR it_variants.
    it_variants-CHANGE_NO  = '500000000349'.
    it_variants-bom_group_identification = 'BAPI_SMP_COL1'.
    it_variants-object_type = 'BOM'.
    it_variants-object_id = 'SIMPLE1'.
    it_variants-alternative_bom = '01'.
    it_variants-bom_status = '01'.
    it_variants-base_qty = '2.000'.
    it_variants-valid_from_date = sy-datum.
    it_variants-function = 'CHG'.
    APPEND it_variants.
    * Details of the items of the variants
    CLEAR it_items.
    it_items-bom_group_identification = 'BAPI_SMP_COL1'.
    it_items-object_type = 'ITM'.
    it_items-object_id = 'SIMPLE1'.
    it_items-item_no = '0010'.
    it_items-item_cat = 'L'.
    it_items-component = '030790490'.
    it_items-comp_qty = '2'.
    it_items-valid_from_date = sy-datum.
    APPEND it_items.
    CLEAR it_items.
    it_items-bom_group_identification = 'BAPI_SMP_COL1'.
    it_items-object_type = 'ITM'.
    it_items-object_id = 'SIMPLE1'.
    it_itemas-change_no = '500000000138'.
    it_items-item_no = '0020'.
    it_items-item_cat = 'L'.
    it_items-component = '030790490'.
    it_items-comp_qty = '3'.
    it_items-valid_from_date = sy-datum.
    APPEND it_items.
    * Details of the materials of the different variants
    CLEAR it_matrel.
    it_matrel-bom_group_identification = 'BAPI_SMP_COL1'.
    it_matrel-material = '030790490'.
    it_matrel-bom_usage = '1'.
    it_matrel-alternative_bom = '01'.
    APPEND it_matrel.
    * Linking items to the corresponding variants
    CLEAR it_itemas.
    it_itemas-bom_group_identification = 'BAPI_SMP_COL1'.
    it_itemas-sub_object_type = 'ITM'.
    it_itemas-sub_object_id = 'SIMPLE1'.
    it_itemas-super_object_type = 'BOM'.
    it_itemas-super_object_id = 'SIMPLE1'.
    it_itemas-valid_from_date = sy-datum.
    it_itemas-function = 'CHG'.
    APPEND it_itemas.
    * Create variants
    CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
    EXPORTING
    all_error = 'X'
    TABLES
    bomgroup = it_bomgroup
    variants = it_variants
    items = it_items
    materialrelations = it_matrel
    itemassignments = it_itemas
    return = it_return.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    LOOP AT it_return.
    WRITE:/ it_return-type, it_return-id, it_return-number,
    it_return-message.
    ENDLOOP.
    Let me know if the parameters are passed correctly for CHANGE scenario.
    Also let me know if there is any other way(FM/BAPI)  to update the Header of the Material BOM ?

    Try doing something like this:
    class MyJTextArea extends JTextArea {
        public boolean keyDown(Event evt,int key) {
            if(key == 13 || key == 10) { // or whatever ascii codes enter may have
                // move carret to next line
            } else {
                super.keyDown(evt, key);
    }which means you have got to catch the enter-key before the actutal JTextArea does this.
    p.s. look at my post, maybe you can help me, too.
    http://forum.java.sun.com/thread.jsp?forum=5&thread=465803&tstart=0&trange=100

  • Material BOM mass change error

    Hi gurus,
    When doing mass change of BOM via tcode CS20, i'm getting below error result.
    The following messages were displayed:                                                                               
    Material BOM 00016478 : Delete Item(s)
       19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
       0130 L 01/01/2002 12/31/9999              1.00  PC     >               1.00  PC
       No batch input data for screen SAPLSDDT 0010
       Folder created/extended
    I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
    I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
    Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
    Hope to hear advise from you all on how to deal with this.
    Thanks and regards,
    Chad

    Dear,
    Error message no is 00344 ?
    Please refer the OSS note  Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
    Regards,
    R.Brahmankar

Maybe you are looking for