Delete MDM Server List

Hi all,
I am new to MDM. I have added a new MDM Server to the console and i would like to rename it or delete it so that i will not appear in the drop down box when i choose my MDM Server to mount. Is there a way for me to do this?

Hello:
I usually delete the following keys under regedit:
HKEY_LOCAL_MACHINE -> Software -> SAP -> MDM 5.5 -> Common -> Known database servers
and:
HKEY_LOCAL_MACHINE -> Software -> SAP -> MDM 5.5 -> Common -> Known servers
Please observe than modifying your Registry can be dangerous and you must backup first and do it only if you know what you're doing!!
Greetings
Alejandro

Similar Messages

Deleting SMTP server list

Hi ,
every time something goes wrong with my Hotmail account, I delete it and re-add it to my iP. However, it seems to be adding a new (or rather the same but a copy) outgoing SMTP server to the list rather than using the existing.
Any way to delete and just leave the active one?
Thanks very much.

Thanks Allan, that is the problem-the option to delete is not there.
When I go in to this mail accounts' settings, then into 'Outgoing SMTP server', the primary server is 'ON' but 'Other SMTP Servers' are 'OFF' (although they are the same)- I can switch them on and off but cannot clear from the list.
Any further advice would be appreciated.
Thanks.

I am unable to send mail on my IPad because the iPad ignores the single correctly configures outgoing server and instead looks for long since deleted outgoing server which is not listed in my settings at all.

Some time ago I used to use an outgoing mail server, which I will call 'XYZ'. However I changed email providers and now have a new outgoing server which I will call 'ABC'. I tried deleting that old outgoing server when I changed email providers but had problems doing so. So what I did was completely delete all email accounts from my iPad and then reinstalled the two new email accounts from scratch, complete with the new outgoing server 'ABC'. That appeared to be successful, and I can receive email OK. Also the new server 'ABC' is the ONLY outgoing server listed in my settings on either account
However despite the new server being the only one in my settings the iPad will not send mail and shows an error message saying that the settings for the OLD server 'XYZ' are incorrect. I cannot amend or delete that server as it has already been deleted and is not listed in my settings.
It is like the iPad is somehow still remembering that old server and thinks it's the primary one. Or it's getting old server info fron iCloud or something.
My iPhone has the same two email accounts and identical settings and does not have this issue.
Any ideas, other than a complete factory reset?
Many thanks
Rob

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Click Check Again and post the text that appears. Anonymize any personal information before posting.

MDM Shopping Lists

HI
Our current MDM set up is allowing all SRM users to be logged into MDM as one user "User1". This enables all users to see each others shopping lists ammend and delete them.
To get around this we have set up individual users in the MDM Server / repository
and in SRM SPRO (call structure) the "username" parameter
as SY-USR type SAP Field is set.
Is there anything else that we need to do as with this set up because when we log onto MDM we get another log on screen into MDM ( even if we log into this screen the system does nothing)
We know that uisng the templates in SRM is another option but this does not account for catalogue updates.
Thanks you in adavnce for any help advise given.
Regards
Yogesh Mistry

Hi,
you should check that all the Users from the SRM are correctly created with the same username and
the password is empty in the Console for this users!
Also the SRM-MDM users has to have the Catalog User Role.
Please check the catalog with direct URL call and not from the SRM. If this works, than the parameters in the SRM SPRO has to be checked or the ITS.
Regards,
Tamá

How can I control SMTP server list in Mail?

I've seen a lot of discussion about e.g. deleting servers, but it often includes smug replies like "click the delete button" when there is often no such button. I have found a possible 'get around' to this particular problem by changing the server data to something that doesn't exist, save that, then select the server again from the list and hey presto, there is now a Delete button you can use. But again, that is not the full story because if that server is used as the primary server for any other account, you cannot modify the data.
Not only that, but you CANNOT simply swap servers so that e.g. an account uses one of the other servers as its primary server. Unless I'm missing something major here, it is NOT possible to move servers. You can change the data for the server to be exactly the same as another server, but that just means you now have an identical duplicate. Once a server entry has been created, it is an independent data entity.
So I seem to have several problems here.
1. A server cannot be deleted if it's in use as a primary for any account.
2. Servers cannot be moved, i.e. swapped between 'Primary' and 'Other'
3. Simply editing the server data does not 'merge' it with any other entry that may have the exact same data.
4. When creating an account, you cannot pick the outgoing SMTP server from the list of ones already created. Simply entering the same data as one that already exists may use that existing server, but may create a new duplicate. I have seen both of these occur and once there's a duplicate, you cannot get rid of it.
I want 3 accounts to all use the same 'Primary' server and also have the same 'Other' server. IOW, only 2 actual servers. After the first 2 accounts are created, that's what I have. Somehow they seem to be able to 'share' the same servers. But when I create the third account and enter the same data for its SMTP server as the others use as their primary (i.e. exactly the same process as when creating the second account), for some reason it does NOT use the existing matching server and I now get a third server created. I simply cannot get around this since whatever I do, each of the duplicates is used as a primary and so cannot be deleted. If I could swap them around so that the third account was using another account as its primary, then I could delete the duplicate and all would be well, but as pointed out above, that's not possible.
I'm hoping that I'm simply wrong about all this and it is actually possible to do what I currently believe it impossible. Can anyone explain how to actually control this server list?

can't edit SMTP server list in Mail
i have exactly the same problem using 10.9.4 - did you ever get a reply?

Mail 5 and SMTP server list

Hi,
ever since my upgrade to OS X Lion, I've noticed that the usage of the SMTP server list in Mail 5 seems to have changed. In the past, said list contained ALL configured SMTP servers. When configuring e-mail accounts (e.g. MobileMe) you could specify a default SMTP server from the server list and check a checkbox to ONLY use the specified server for outgoing mail of an account.
In Lion the meaning of this server list seems to have changed and I think I have discovered a bug that prevents me from using only a specific SMTP server with an account.
For accounts that are supported by Lion and listed under the "Mail, Contacts & Calendars" Preference Pane, Mail 5 seems to always use a default server setting for outgoing mail. For GMail, this default server seems to use SSL. However, for MobileMe the default server is not the service's SSL SMTP server.
Sending mail on non-SSL ports is a problem for me for two reasons:
1.) Obviously this a security/privacy issue.
2.) I'm a student and when logged into my universities network I can't send e-mail on default e-mail ports (25). Our servers block any outgoing e-mail on ports other than SSL/TLS ports.
So far this shouldn't be a problem, because you should be able to overwrite Mail's default server by configuring another MobileMe SMTP server with SSL in the server list and checking the checkbox depicted in the below screenshot.
Unfortunately, whenever I select the SSL enabled MobileMe SMTP server, activate the checkbox and save my changes, Mail will revert to the the default SMTP server without SSL immediately. If I delete the default server from the server list, it pops up again after saving the changes. There seem to be just two ways of sending e-mail using a different server than the default one:
1. Don't check the checkbox and specify the SMTP server for each e-mail you want to send.
2. Send using the default server. If sending the mail fails (because I am in my university's network), select the SSL SMTP server in the trouble-shooting popup.
Option one is annoying. Option two still bears the security/privacy problem and is annoying, because it takes ages for Mail to accept that a server does not seem to work.
There seems to be no way of fixing this behavior and I have it on both iMac and my Macbook Air. Is this a bug? Do you have any suggestions for a fix?
Thanks a lot,
Felix

Felix,
I agree, I think it is a bug. My wife is experiencing the exact same issue on her MacBook after upgrading to Lion.
I submitted Mail feedback tonight to Apple. I hope they get this fixed pronto. My wife prefers Mail to the web interface or using her iPhone for mail. Thanks for explaining the issue.

Cannot edit outgoing SMTP server list in mail.app

Did a fresh install of Snow Leopard on a new 13" Macbook Pro unibody and was trying to add an IMAP email account. After failing to connect, I was trying to specify the outgoing port and realized that I could not edit the outgoing SMTP server list.
Steps to reproduce error:
1. Open mail.app
2. Go to Mail > Preferences
3. Select "Accounts" tab and select any mail account
4. Select "Account Information" tab and click Outgoing Mail Server (SMTP) drop down menu
5. Select "Edit SMTP Server List..."
After that point the instead of opening the list of servers with their settings, it simply returns to the "Account Information" screen. I'm a bit confused because I've never had this happen before in any other version of mail app. I cannot edit or delete any outgoing mail server accounts because of this. Any help will be much appreciated. Thank you for your time and consideration.

This should not happen. Had you migrated back to the fresh install the Mail folder in User-Library? Or is this a clean setup? I would go to User-Library-Preferences, and drag the com.apple.mail.plist to the trash, then open Mail and try again.

Repositories are invalid after restarting the MDM Server in MDM 7.1

Hi SDNers,
After I restarted the MDS server I am not able to logon to the repository. When I tried to connect to repository I am getting an error like "Repository Connect Failed and The MDM Repository is Invalid"
I tired to delete but I am not able to delete also. While deleteing it is giving an error like "MDM Repository is in Read Only Mode".
So I am not able to Delete the repository also to create a new Repository.
Any Help or Solution
Thanks
Kiran
Edited by: Kiran on Apr 6, 2011 6:40 AM

Kiran -
some of the below ways you can check
1. Check your mds.ini settings. and do unmount nad then mount the MDM server again. Try to Monitor the Authentication for Particular repositry which you want to connect to your MDM 7.1 server
2. after checking the note 1325833. try restart database server first then MDM server.
3. also try to check with Appropriate repository option once.
HTH
thx
Deep

MDM Server doesn't start after upgrade to SP 5

hi,
i'm not used to sap services on windows hosts.
After the Update from 7.1.04 to 7.1.05 the mdm server doesn't start. I found only a few logs (unter c:/usr/sap/SID/MDS00/work). Most of them from sapcpe (without errors or warnings). Only the sapstart.log contains a bit information:
SAP-R/3-Startup Program
Starting at 2010/08/16 21:29:18
Startup Profile: "C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest"
Starting Programs
(1684) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/mds.lst
(976) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/shared.lst
(3632) Execute: C:\usr\sap\MDM\SYS\exe\uc\NTAMD64\sapcpe.EXE pf=C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest list:C:\usr\sap\MDM\SYS\exe\uc\NTAMD64/sapinstance.lst
(2172) Execute: C:\usr\sap\MDM\MDS00\exe\mdmcpc.bat C:\usr\sap\MDM\SYS\profile\MDM_MDS00_mdmtest.INI C:\usr\sap\MDM\MDS00\config\mds.ini
(3652) CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3652 died unexpectedly, restarting process
(3612) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3612 died unexpectedly, restarting process
(2364) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 2364 died unexpectedly, restarting process
(3576) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3576 died unexpectedly, restarting process
(3588) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
Process 3588 died unexpectedly, final process restart.
Process will not be restated in the future because of frequent failure.
(1396) Restart CreateProcess: C:\usr\sap\MDM\MDS00\exe\mds.EXE
This isn't really much I can work with. In the sapmmc I found the Option Developer Trace. I try to 'switch it on', but there is no difference.
With 7.1.04 the server was running well.
I happy for any suggestions

Hi,
Please check out Note 1482822 - MDM Server not starting after MDM 7.1 SP05 was installed.
hope it helps you.
Best regards,
sudhanshu

GDS repository for MDM server

Greetings,
A couple questions for GDS experts...
1. Is there a GDS repository for MDM server? I am asking about an .a2a file. I am not able to find one. Could you please guide me to the location from where I can download it? Thanks.
2. When we extract data from ERP, it is stored on MDM server. This much I gathered from different presentations but in which repository does it go to?
3. If there is an MDM repository for GDS solution then can we modify it and add more fields to it?
Regards,
-T

Hi,
I checked the directory listing of the folder where I extracted that zip file and as you can see below there is no a2a file.
Regards,
-T
Directory of C:\software\SAPSWs\new folder
11/04/2008 08:12 AM    <DIR>          .
11/04/2008 08:12 AM    <DIR>          ..
11/04/2008 08:00 AM    <DIR>          Connector
01/27/2008 05:21 PM        30,149,843 GDS_1.0.6.1.ear
01/27/2008 05:21 PM        16,109,596 GDS_ExternalValidations_1.0.6.1.ear
11/04/2008 08:00 AM    <DIR>          MDM
               2 File(s)     46,259,439 bytes
Directory of C:\software\SAPSWs\new folder\Connector
11/04/2008 08:00 AM    <DIR>          .
11/04/2008 08:00 AM    <DIR>          ..
01/25/2008 09:38 AM            67,243 com.sap.mdm.tech.connector.sda
01/25/2008 09:38 AM         5,008,269 com.sap.mdm.tech.mdm4j.sda
01/25/2008 09:38 AM         5,078,356 MDMJAVAAPI05_2.sca
               3 File(s)     10,153,868 bytes
Directory of C:\software\SAPSWs\new folder\MDM
11/04/2008 08:00 AM    <DIR>          .
11/04/2008 08:00 AM    <DIR>          ..
01/25/2008 08:16 AM        24,251,867 MDMConsoleInstall_Ver5.5.42.103.exe
01/25/2008 08:18 AM        27,671,239 MDMDataManagerInstall_Ver5.5.42.103.exe
02/08/2008 12:15 PM       168,756,751 MDMServerInstall_Ver5.5.42.103.exe
               3 File(s)    220,679,857 bytes
     Total Files Listed:
               8 File(s)    277,093,164 bytes
               8 Dir(s)   5,152,546,816 bytes free

Delete Ghost Mailing List User (Mailman Config Bug)

I recently did something stupid. On the up side, I recognized that it was stupid right after I did it, but unfortunately my effort to undo what I did wasn't fast enough to correct the following issue. First, here's what I did:
I added a new group with the same name as an existing user.
Immediately after thinking about it and determining that this was probably a really bad idea, I deleted the group.
I thought everything was working fine until I realized that email was not coming in to the email address of the aforementioned user (the user that I had created a group of the same name)
Fortunately, I figured out the problem and a temporary fix. The purpose of this post is two fold: first, to submit what I believe is a bug, and secondly to figure out a way to permanently fix this issue on my system.
I have determined what happened on my system is this:
a mailing list group of the same name as my existing user was created thus diverting mail from that user to a now non-existant mailing list user. That results in the List Server Log reading the following when an email is sent to the user in question:
list_server_post[16378] <Error>: missing list GUID
Here's what I believe is a BUG: OS X Server 4.0 did not delete the mailing list group when I deleted the group. Now that's probably understandable because it's probably a protection against also deleting my user of the same name as a precaution, but it's not the expected behavior nonetheless.
Here's where I need help: In searching through various config files, I've determined that there entries located in /Library/Server/Mail/config/listserver/prefs which correspond to various lists (including my ghost list). I've also determined that /Library/Server/Mail/Data/listserver/aliases contains the references to the list that postfix uses to handle delivery. Unfortunately, according to the contents of /Library/Server/Mail/Data/listserver/aliases/list_server_virtual these files are generated "automatically" so deleting them does not rectify the problem. My assumption is that these files are generated from Open Directory, but for the life of me, I can't figure out what entry. In any case, I need assistance deleting the entry which should no longer be present. Any help would be GREATLY appreciated.
In the meantime, I have successfully worked around this problem by issuing:
sudo /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl disable service=com.apple.list_server_mgr
which, of course, disables the list server (which I don't need), but I'm afraid it will be re-enabled if I restart (maybe I'm wrong about that, but I'd prefer to get to the root of the problem so it doesn't pop back up and bite me in the future).
Thanks in advance!

Where would the error be sent? If you send it back to the originator, you
disclose membership of the list. You can, however, configure the list
to have an address to which DSNs and NDNs are directed so that the
list maintainer (or whomever) can be alerted to these issues. This
is done with the mgrpErrorsTo LDAP attribute associated with the list
description. (I myself do not know how to set that via iDA.)
FWIW, there's a public mailing list for iMS issues. That mailing list is
read and responded to by many of the iMS engineers. It's
[email protected] Anyone can post to it; it's an unmoderated
list. You can subscribe by sending a message to [email protected] In the message place the single line
SUBSCRIBE

MDM apis documents to develop in-house MDM server

Hi All,
We are having apple enterprise account and planning to develop apple MDM server. Please let me know the required documents and sample codes.
And also is there any way to get the installed application list in iPad without the MDM and let me know the ways in which i would get the installed app list in ios

open source project:
http://enterpriseios.com/forum/topic/iOS_Device_Management_Open_Source_Way
stackoverflow.com Is a good place to ask programming questions.
MDD question
http://stackoverflow.com/questions/8068317/how-to-develop-iphone-mdm-server
by sudheer
THE IOS MDM PROTOCOL
http://media.blackhat.com/bh-us-11/Schuetz/BH_US_11_Schuetz_InsideAppleMDM_WP.pd f
Robert

Server list corrupt?

System Leopard on Powerbook G4 and Mirror Door
ISP AT&T originally yahoo sbcglobal.net
We have had this account for 5 years and have had problems spread over that time with having our "reply to" email be something other than the default [email protected] We have had to verify our email addresses at least annually. A headache but we have managed to keep things working.
Recently, Mail began to fail sending... it would offer a selection of servers we and after several attempts the mail would send and we would receive a Error 553 message. So this is looking like a problem with AT&T? Maybe but maybe not entirely?
I think it may be partly a problem with Mail because we are not having the problem with our laptop... only the desktop and because the SMTP server list looks wrong.
The Connection Doctor shows I have 6 server addresses. In Mail preferences I am only able to see 3. The 6 include 3 that I had deleted many months ago. If Mail is trying to use these, it might explain the problem. I have tried running the applescript Manage SMTP servers... it shows that all are being used... Not so! I think I need to purge every setting Mail ever had and start over. How do I do this? Do I need to save my mail messages to keep from losing them?

because that is an easy solution !
Realy... I try to use the config options before do a hard solution.... I think that may be there are others that need this setup, and can be good that pacman could handle this.....
Today I detect another problem.... The desktop host don't have the share active, from the laptop try to install ruby and first sincronize.... custom can't sincronize (ok) and sicronize the others.....Show me ruby-1.8.0-1 and ask to install.... press enter and fail saying:
:: Retrieving packages from custom...
failed copying /mnt/net/arch/ruby-1.8.0-1.pkg.tar.gz
I never download ruby before, and for what not try with the others repositories ??
The custom repository, custom.pkg.tar.gz, was created from a full abs, not a local one... this is the problem.... May be gensync need an option to generate a custom repository from a directory, the packages have a .PKGINFO that have the dependencies and other data.
I take a look to gensync and I think there isn't problem to add a param to generate from a .PKGINFO instead a PKGBUILD.... I will made a test and post one update here....
But the problem with the repository could be with the online too I think... Pacman may think that all the repositories have the same files, but if one not have one or there is a problem, he try with the next repository ??
c'u and thanks
:: Nelson ::

Database error - MDM server installation

Hi,
I installed SQL Server and then MDM server. Now SQL server is up, server sign on console is green, when I try to unarchive repository archive, I got database error: error to initialize database. (I uses "sa" to connect )
What is needed to configure MDM to talk with SQL Server?
Thanks a lot in advance!
David

Hi Subbu,
When i tried to set DBMS settings or unarchive repository, it prompt me <server name>[Sql Server] Initialization. Two entries are needed there:
Data file path:
Transactional log file path:
I set them as following:
C:\Program Files\Microsoft SQL Server\MSSQL\Data
C:\Program Files\Microsoft SQL Server\MSSQL\Data
then get error:
"Unable to set current database with database server";
"The MDM repository list schema has not been created"
I also tried to input as "C:\Program Files\Microsoft SQL Server\MSSQL\Data\mdmsp3_Data.mdf" and C:\Program Files\Microsoft SQL Server\MSSQL\Data\mdmsp3_log.ldf"
still get the same error.
Please put some light on this!
Thanks!
David

Why my MDM Server can only communicate with ipads and iphones with logging Junos sslvpn.

Why my MDM Server can only communicate with ipads and iphones when either of the iPhone or iPad Junos sslvpn? Any ideas
Our iPad and iPhones users have to log in to Junos SSLVPN to be able to communicate with our MDM Server (via wi-fi). Any ideas where users don't have to log in to Junos SSLVPN?

This bothers me so much. It is absolutely ridiculous. I use my Apple ID as well as a family member's Apple ID to download music.
Every once in a while I will purchase a song and it won't download correctly or will give me an error that my computer is not authorized, a solution I usually fix by deleting and redownloading the song from the cloud. This doesn't work, however, when it happens to both accounts within 90 days.
It is incredibly frustrating to me that I have paid for a song, it downloaded incorrectly, and I must wait 90 days to try downloading it again because of these assinine policies.

Delete MDM Server List

Similar Messages

Maybe you are looking for