Delete message queues

I had iconnection problems between one of the POA and MTA and I restored this connection after a couple days.
now I can see the poa open on the MTA bus the message between the post-offices are not working.
I thinking the delete the message queue because I believe that there is possible problem with the queue ( any bad message that blocked it).
How can I clean the POA queue ?
Tks.

* ffernandesv,
down the MTA, under the MTA directory, rename the MSLOCAL\MSHOLD\<postoffice>\ folder of the troubling PO. The folder will get recreated when you restart the MTA.
Also down the POA and rename the WPCSIn and WPCSOUT directory under the POA's directory structure.
HTH
Uwe

Similar Messages

  • How to delete messages in the queue?

    The system log shows that it could not send message from queue , so I want to delete messages in the queue.
    Please tell me how to deal with , thank you !

    because the system log (/var/adm/messages) shows that it could not upload bulk message and not send message from queue. I am afraid of system down , I always uses
    imsimta qclean -from=sendmailuser -delete
    the result is Deleted N message files
    but I found that message files was exist at the same
    could you tell me the reasons!!

  • Clearing JAVA Message Queue in PI 7.1

    Hi Experts
    I am working on a file to File Scenario, and file has been picked up on the sender CC and mesaages have been sent to JAVA queues, But the messages are stuck on the JAVA queues,
    Java Queue name: File_http://sap.com/xi/XI/SystemRecv
    How can I clear the JAVA message queue in PI 7.1
    Thanks
    PR

    If the messages are on the queue, usually one of the actions must be performed: a) Fix the related scenario and restart the messages or b) Manually cancel the messages. This is also advised on the note below under item "3. Troubleshooting Archiving / Deletion in the Adapter Framework"
    [Note 872388 - Troubleshooting Archiving and Deletion in PI|https://service.sap.com/sap/support/notes/872388]
    If you are having performance problems, please check if the messages are taking long time in TBDL/Holding status. Let us know if this is the case.

  • Delete messages stuck in status 12, Recorded for Outbound Processing

    I am on a PI 7.10 SP8 system.  I have 59,000 XML messages showing in status 12 ( Recorded for Outbound Processing) that I would like to just delete or cancel.  These have accumulated over several days of testing interfaces.  If I have to allow them to be processed, that would also work but is not needed.  I have read about 6 different forum threads and tried several things but nothing has worked yet. <br>
      The messages can not be cancelled from SXMB_MONI. <br>
      The queues are no longer showing in SMQ2.   <br>
      I have tried restarting and re-registering the queues. <br>
      I've tried RSXMB_RESTART_MESSAGES and RSXMB_CANCEL_MESSAGES. <br>
      SWPR & SWPC show nothing to restart. <br>
    Any ideas on something else to try? <br>

    Hi,
    You can try to delete or archive mesages. use following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50
    Delete Messages SXMB_MONI
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
    Too many questions on Archive/Delete messages.
    Inder

  • Hook up to Message Queue

    Hi,
    I was just wondering if anyone knows whether I can get Calendar Notifications using Message Queue, I have successfully hooked up Messaging Server with Message Queue and that sends through NewMsg notifications at the moment. However I can't find any documentation regarding this kind of functionality for Calendar Server. I would like to use Message Queue, due to the JMS api being a whole lot nicer and more complete than the ENS stuff that I regret playing with.
    I have Calendar Server 6.3 patched to 121659-19. I can't find any csversion tool to give the exact output. Running it on Centos 5, as a single instance with multiple domain environment.
    Many Thanks for any help,
    Ned

    Hi,
    Yes, we also have the same issue with Calendar server 6.3 JMQ 4.1patch 1.
    I believe, Solaris 10 comes with JMQ 4.1 installed. We just did the following:
    1. Modified the JMQ configuration file /etc/imq/imqbrokerd.conf and replaced AUTOSTART=NO to AUTOSTART=YES
    2. Started Java Message Queue: /etc/init.d/imq start
    3. The Out put of command "/usr/bin//imqcmd query bkr -u admin" shows as follows:
    Version 4.1 Patch 1
    Instance Name imqbroker
    Broker ID
    Primary Port 7676
    Broker is Embedded false
    Instance Configuration/Data Root Directory /var/imq
    ... and so on
    4. Added the following to the ics.conf:
    local.server.csmfagent.enable = "yes"
    caldb.serveralarms.dispatchtype = "jmq"
    caldb.serveralarms.jmqTopic = "JES-CS"
    caldb.serveralarms.jmqhost = "localhost"
    caldb.serveralarms.jmqlib = "/path_to_calendar6.3/cal/lib/libmqcrt.so"
    caldb.serveralarms.jmqport = "7676"
    caldb.serveralarms.jmqUser = "guest"
    caldb.serveralarms.jmqPwd = "guest"
    5. We also have the ENS enabled and have the following in the ics.conf file:
    service.ens.enable = "yes"
    caldb.serveralarms.dispatchtype = "ens"
    caldb.berkeleydb.ensmsg.createevent = "yes"
    caldb.berkeleydb.ensmsg.createevent.url = "enp:///ics/caleventcreate"
    caldb.berkeleydb.ensmsg.deleteevent = "yes"
    caldb.berkeleydb.ensmsg.deleteevent.url = "enp:///ics/caleventdelete"
    caldb.berkeleydb.ensmsg.modifyevent = "yes"
    caldb.berkeleydb.ensmsg.modifyevent.url = "enp:///ics/caleventmodify"
    6. Ran the JMS client as /path_to_calendar6.3/cal/tools/unsupported/bin//jmqclient -u jesuser -w password -q imqbroker
    7. when we create some events or delete events ... we donot see anything reflected in jmsclient.
    Am i missing anything? Any idea whats the issue is? Can we have notifications published to both ENS and JMQ? or just either one of them?
    Any help is appreciated. Thanks in Advance!
    Regards,
    Arun

  • Server mail does not delete mail queue

    mail server does not delete mail queue.

    Apparently, Mail sometimes fails to remove messages from the server when Remove copy from server is set to Right away -- don’t know why.
    I can only guess Mail sometimes has problems communicating with the server, and precisely because the setting is Right away, never tries again. I’d try changing the setting to After one day or When moved from Inbox, and see whether that makes a difference.
    Also, go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
    Have you checked whether Thunderbird does remove the messages from that server?
    BTW, woodie is wrong. It’s true that Gmail ignores any requests to delete messages from the server made by a POP client, but it doesn’t let the same messages to be downloaded more than once via POP either. Gmail just doesn’t work like a normal POP server would.

  • Using Microsoft Message Queues (MSMQ) with LabVIEW

    I want to use the Microsoft Message Queue to communicate between applications on different machines. Does anybody have experience in using the MSMQ with Labview (in the .NET framework)? How do I send messages? The MessageQueue.Send method requires an object, and I don't know how to create this object format.
    This question was asked several years ago on this forum and no answer was given.
    I would appreciate any examples of Create a Queue, Delete a Queue,  Send a Message, and Read a Message in LabVIEW 7 or earlier.
    Thanks,

    P.C.
    I'm a little confused by what you mean.  I thought you were sending messages through the MSMQ, but the code there would receive a message, get the body, then display the body of the message.  The Object that the invoke node refers to is the Body of the Message, which has no properties, but has a few methods like ToString that you can use to get the string from the Body. 
    You need to wire up the references into the invoke and property nodes to get the selection of the methods or properties that are available.  Do they just not appear when you are using the invoke node with a reference to the body?
    Message Edited by Coal Man on 06-04-2007 01:56 PM
    Brian Coalson
    Software Engineer
    National Instruments
    Attachments:
    msmq.Jpg ‏40 KB

  • How can I set up a new account without auto deleting messages on the server?

    Ive got accounts on COMCAST.NET (are those imap accounts?) and when I created a user account on Thunderbird for one of them the autocreate process immedaitely started downloading messages from my server before I was able to set the "keep messages on server" flag. (Its been a few months, forgive me if I am not using the exact right option text but you get the idea.)
    How can I create a Thunderbird account that will download all the message on my server (comcast.net) and leave them all there?
    That's the only thing keeping me from switching to Thunderbird. Please help - comcast's online web client is not the most bug free thing in the world.
    (Note, I am setting up a new win7 system, had been using OE 6 on winXP. I assume I am better off trying this than running OE in XP in a virtual window - and even if I moved my old message bases from XP I still need to create an account that won't immediately start downloading/deleting messages from my server before I can configure it not to.)
    Any help appreciated.

    Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
    https://support.mozilla.org/en-US/questions/991539#answer-547878
    The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

  • Why are deleted messages not going to deleted folder

    In Account settings > server settings I have set it to move deleted messages to a particular folder but thunderbird appears to be permanently deleting messages as I can't find them anywhere.
    This is with an IMAP account.

    What messages? iMessages? Mail?

  • Delete messages from server?

    Hi Guys,
    I have a question regarding mail management.
    Here is my situation:
    I have a GMX e-mail account; when I manage my e-mail on a computer (any computer), I always use the web-based e-mail straight from the website. I have this e-mail address configured in Mail on my iPad as an IMAP account. When I check my mail via iPad, it shows me my current inbox, but if I delete messages from iPad, it moves the message to trash, but does not reflect this on the server. So when I go to login to my account from a regular computer, any e-mail(s) that I have deleted through my iPad are still in my inbox at the GMX website.
    On my iPad, I have turned Push to Off and I have Fetch set to manual, whenever I launch Mail. I have tried hitting the refresh on my iPad after I move a message to Trash, and my iPad's Mail settings are set to move deleted items to the "Trash" folder on the GMX server. Sending and receiving e-mails are no problem.
    What am I doing wrong here? I am tired of deleting messages on my iPad (such as spam) and then having to go onto a computer and login to GMX and delete them again.
    Btw, same exact issue on my iPhone with exact same e-mail settings.
    Thanks,
    Emile

    Thanks for the tip, Ralph.
    I just went over to the GMX website and went to their support forum and apparently this is a known problem when accessing e-mail through an IMAP or POP3 e-mail client. A post was made at the end of August saying they are aware of the problem and are trying to fix it.
    I've had this issue with my GMX account since my first-generation iPhone and they've just realized it a month and a half ago. I wonder how long it's going to take for them to repair the issue, sheesh!
    I will mark this thread as resolved but since I just have to wait for GMX to fix the problem on their side. At least we got to the bottom of this, thanks for the help guys.
    Message was edited by: MrElussive

  • Delete messages from server when deleted from iTouch doesn't work

    Hi everybody,
    Two questions really...
    One is that with my 2nd gen iTouch I was able to set IMAP settings and it would show all of the folders (other than Inbox) that I have created on my mail account. The 4th gen iTouch doesn't seem to let me see the sub-folders.
    The second is that I have my account set to delete messages from the server when they are deleted from my Inbox, but that simply doesn't work.
    This is withe the iTouch 4 and OS 4.1 (8B117)
    Any suggestions?
    Thanks

    Is it possible that I have the wrong Server Port entered? I didn't fill in that field at all. I think it was filled in automatically. I guess I would have to contact my hosting company's support team to know what the server port is.

  • "Delete messages from server" Mail iPhone 5

    Hi, I am trying to locate "delete messages from server" option in Mail Settings on iPhone 5 and can't find it. In iPhone 4 it was just in the Advanced settings but it is not there in iPhone 5. Help please? Thanks

    Not sure who your email provider is. Mine is hotmail. When you set up email with hotmail on an iPhone 4 the delete from server never is available. I just got an iPhone 5, i reset up my hot mail account and can't find that setting either. I set it up by using the hotmail button not "other" so meaning delete your hotmail account from your phone. Then re set it up. But when you do add email account, don't use the button that says hotmail. Use the bottom choice that says "other". I have no idea why this is different but if you do this it will set up hotmail just the same. But now that setting is there. The "delete from server" and you set it to "never". Now when you delete the emails from your hot mail account on the iPhone, it leaves that email on the hotmail server. So when you look at email on the computer it's there still. It's good this way if you share email with someone.

  • Cannot delete messages from inbox, cannot move messages out of inbox, message do not copy to "sent" or "draft"

    The following problems occur:
    - cannot delete messages,
    - cannot move messages out of inbox,
    - messages do not copy "sent"
    - messages cannot be saved to "draft"
    This applies to imap and to gmail accounts.
    The following has not helped:
    - compact trash and other folder
    - deinstall and reinstall TB 31.4.
    - archive profile with mozbackup and replace profile from archive after reinstall of TB.
    - deinstall and reinstall TB 31.3 downgraded
    - delete all folders and files with "trash*" in the file name (all IMAP)
    - delete all files of 1 mail account completely in the TB profile and resync from server (IMAP)
    This might coincide with these system changes:
    - upgrade to TB 31.4.
    - some of these email accounts were installed on ios8 iphone.
    Not sure if the problems had already started before these 2 occurrences.
    Any help is appreciated to solve this.
    Thanks!
    fashi

    What type of mail account is this (POP, IMAP, .Mac)? If POP, what are your Preferences > Accounts > Advanced > Remove copy from server settings?
    You may be able to get rid of those messages in Mail doing Edit > Cut (⌘X) (for best results do it with one message or just a few at a time), but you should remove them from the server first if they’re still there.
    Does this account allow web access? If not, you may find the Account Info window useful to solve this problem — choose Get Info (⌘I) from the Action menu (gear icon) located below the mailboxes list in the main Mail window.

  • Cannot delete message from Trash

    Hi
    I have more than 10,000 deleted messages under Trash, in a folder named "on my mac".
    When I try to empty that folder o just empy the whole Trash, Mail crashes due to the high volume.
    I would like to delete those messages from the Finder, but I cannot find there the "on my mac" folder.
    Any ideas on how to get rid of the deleted messages?
    Thank you.
    Eneko

    The messages are .emlx files, but there is an index file that will still point to them unless they are deleted in mail.
    Try opening a few of the ( you say it's 60 000 now? it was 10 000 before ) messages - I hope you'll get a message saying they can't be displayed.
    If you do, go to the mail menu Mail-Mailbox-Rebuild . this should re-work the index so it reflects the true number of messages.
    Having said that - have you tried just deleting the mailbox, rather than trying to empty it? highlight the 'on my mac' trash mailbox & choose Mail-Mailbox-Delete.
    Failing all that - I'd be tempted to move your wanted messages to various new mailboxes, ( in modest numbers per mailbox - perhaps not numbered in the 10 000's?) make a copy somewhere safe of the entire Mail folder, then force Mail to start from scratch & import your old wanted messages into mail.
    To do this - after you've created your new mailboxes & moved the messages you want to keep into them; copied the Mail folder and Quit Mail
    In Finder locate home/library/mail/ & trash that folder.
    Then locate home/library/preferences/com.apple.mail.plist & move it onto the desktop, just in case things go wrong. ( I mean Move, don't leave the original file in the Preferences folder )
    Open Mail again - you'll be asked for account details ( you wrote them down first?)
    Just in case you get asked "do you want to import..." at this stage - Don't do it.
    Then. from Mail, use Mail-File-Import Mailboxes & point it to the "mailboxes" folder inside the copy of the Mail folder you made.
    Choose only the new mailboxes that you made, & moved your wanted messages to . Import them & they should all be viewable in mail.
    Try the 'rebuild' or delete mailbox first though - & if any of the above isn't crystal clear - ask before you proceed.

  • Problem with GlassFish and Sun Java System Message Queue

    Hi,
    I used application server PE.8 and I upgraded to Sun Java System Application Server Platform Edition 9.0 Update 1 Patch 1, and I changed all my CLASSPATH and everything. My system is working fine, but the Sun Java System Message Queue that I used before is still showing the queues and physical queues of the previous application server, not the new one. Do you know if there is way to change that and link it to the new version?
    thanks

    Use an ESB like ServiceMix to bridge JMS providers
    http://servicemix.org/
    Or write your own MessageListener to consume from one JMS and publish on another one. Be careful with queues to avoid loosing the ordering - so you probably want to use a single MessageListener per subscription/queue - or to take advantage of Tibco's exclusive queues to ensure ordering is preserved. If ordering doesn't matter then don't worry too much about it and maybe have a pool of consumers to improve throughput
    James
    http://logicblaze.com/

Maybe you are looking for