Delete MIC

Dear QM Exert,
I want to Delete the MiC but when i Delete Through QS25 Then this messae show.
No validity period was selected for master inspection charac. CD1014 1000,
Please help me in this issue.
Thanks & Regards,
Umar Farooq

hi
GENERALLY YOU GET MESSAGE (No validity period was selected for master inspection charac)BECAUSE OF THE FOLLWING DATA.
The master inspection characteristic is being used/has been used and cannot therefore be deleted
so goto QS26 check where the MIC (CD1014 in plnat 1000) is used.
and you need to remove them from the groups or plans.
then try to delete
-ashok

Similar Messages

Deleting MIC version

Hi Friends,
Is it possible to delete MIC version. For example i have a MIC with two versions. Both versions were created on the same day.
Now i want to delete the version 2 of MIC. Is it possible?
Thanks in advance.
Warm regards
Anand

HI,
This is wrong posting area,it should be in QM.
yes you can set the deletion flag to MIC provided the MIC is not in use anywhere.If it is in use (Plan,Inspection lot) you can't do that.
Regards,
VJ
Edited by: Indianvj on Feb 17, 2010 11:38 AM

Deleting MIC or Characteristics in QE01 or Result Recording(QA32)

Hi friends
Any t.code for deleting MIC or Characteristics or Parameter in QE01 or Result Recording(QA32)
Thanks & Regards
Gajendranath

Hi
while dong the RR you can not delete the char/MIC as while creation of inspection lot only task list gets attached.
So what you can do the remove the task list from the lot,
In QA02>enter Inspec Lot->click on Reset sample.--->save.
This will remove the task list & status of lot will become CRTD from REL.
Now you can change the task list & attach the task list through QA02>click on Inspec specs->save.
Regards
Sujit

Re: Satellite L450D-11G - I accidental deleted mic driver

I accidental deleted my mic driver, still have sound though, help please.
Do i need to download a new driver?

Is this your notebook?
http://www.toshiba.co.uk/discontinued-products/satellite-l450d-11g/
Whats exactly wrong with the notebook?
Im asking because you said you deleted the microphone driver.
First of all such driver does not exists.
The sound driver controls the microphone.
But you said that sound is still working so Im confused a little bit.

MIC delete

Hi,
1) I want to delete MIC , results are recorded for this MIC's so Cancel the inspection lot , removed the MIC from inspection plan still when i am going to delete MIC by t-code QS25 or QS23 system giving me date error but i tried by key date also then also same problem .
2) I want to delete MIC which are not used in any plan or inspection lot still same problem.
pls guide me whats the issue for above two condition.
Regards,
Shivanand

Hi Shiv,
you will get this message in 3 cases -
1. The master inspection characteristic has not been created
2. You do not have authorization to edit the master inspection
characteristic
3. The master inspection characteristic is being used/has been used and
cannot therefore be deleted.
Check these things, specially 2nd and 3rd point.
Vishal

Delete BAPI for QS61 - Maintain material specification

Hi Expert,
I need to delete MIC (Master Inspection Characteristics) from QS61 using a BAPI.
I need to pass matnr, MIC & plant to the BAPI in order to delete the MIC
In other words, I need to call a BAPI which does the same as:
T-Code: Qs61 ==> F5 ==> Highlite the row ==> Shift F2 ==> Enter ==> SAVE
Thanks in advance

Hi Raj,
Check the version of your master inspection characteristics. Perhaps the class characteristic hasn't been assigned the version that you are using in the material.
Regards,
Julian

QDL3- MIC updation

Dear Team,
I have one specfic issue relation to the updation of Master inspection characteristics in the QDL3 transaction with reapect to the inspection plan.
For example
Let say i have the following in my inspection plan
Operation No. 2000, Mic No. 0010,Mic Name "weight" & DMR is "DM1" (that means after first accepted lot this will move to the skip lot max 999)
QDL3 : Yes i have the above MIC and it already reached the skip status (count is let say 20)
Now my problem is.
Due to some reasons if i delete this MIC (0010) from the inspection plan but still i am see this data in the QDL3 transaction (Note: only MIC discription is removed, other data not remove in the QDL3 or QDQL table) Total line item is not deleted from this transaction.
After some time, If I add new mic, this is beeing added as Mic no. 0010 in the operation 2000. This new mic description is replaced in the QDL3 transaction with all the old value for the Deleted MIC. (Since the operation no and the Mic number are same)
As i understand that this transaction QDL3 will be updated after the UD only.
Meanwhile
Please let me know that how to identify the new added MIC in the QDl3 transaction. (I have check QDQL table also)
Thanks in advance
Selvam

You can reset the quality levels at transaction QDH1.
and
You can change or delete the quality level manually at transaction QDL2.
Regards
Luke

QM-qs21-qp01

Dear all,
I created mic(using qs21) and assigned in qp01.
I want to delete mic code.
fist i deleted form qp01.
In qp05 this material is not showing.
But qs22 it is showing.
i want to delete .
How to do delete this mic .
Please help me.
jyoti prakash

Dear Mittal,
While creating MIC i'm not using class characteristic field
only first 3 fields are entered viz.,
1.Plant
2. MIC code
3. Valid from then goes to next screen.
There complete copy model comes by default.It's greyed out.
Not able to change. Pls suggest what do u mean by Class char
Rgds,
Jyoti

I disabled stereomix to use mic only, now stereomix seems deleted??

While testing 'n configuring web streaming, (took ages, so I dont really want to do restore point) I disabled the Stereomix, cos it seemed like it was conflicting with the mic. But I only disabled it! Now it is gone-deleted-cant find it anywhere. HP, made me DL software to analyse missing drivers, only to come back n say my warrantee has expired. Can anyone help to find a way to get the stereomix recording option back, without a restore point. Will that work anyway? I may need to. Disappointed at HP, for making this harder than it needs to be, butits my own fault. I cant see it in devices, or in Control panels realtek HD audio manager only has the mic now. Im so mad. I only disabled, no warnings came up at all. Help please.
Compaq CQ105TU // 2.1 intel dual core // 2GB Ram // 500GB HDD // 16mnths old.
This question was solved.
View Solution.

Thank god I have found the driver. Insead of taking the "HP" option of D/Lding their software to go through my PC to find missing drivers, I instead searched manually for it, and found it quite easily. No, expired warranty problems, But it was a big download. 115mb's. But Im very happy, I have an updated version, WITH my stereomix option back. "sp54986.exe" to be exact. Happy happy happy. I shouldve persisted before posting, but got frantic when HP ran me round in circles, after a couple of hours looking on my PC for the missing stereomix, Still.... It is a worry, that a simple disable, can do that vanishing act on me. Or was it just hiding somewhere? I dunno. But I think it was really gone!! Like me now, finally. Bye All. (Thanks 4 sfa HP)

T61p: I accidently deleted my mic

hi!
i somehow managed to delete the integrated microphone of my t61p. can anyone tell me how to reinstall it? it doesn't show up under "sound" at the control panel anymore.
thanks
phil
moderator note: model added to title.
Message Edited by Agotthelf on 26-03-2009 10:45 AM
Solved!
Go to Solution.

Hello Phil,
Maybe if you can find your mic as a
separate entity in Device Manager, you could use the reinstall driver
option, and it might just find the driver on already disk and load it.
If anything goes, you might need to reinstall the sound drivers.
Maybe you should uninstall them first, then reinstall.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Firmware deletes all music on the mic

Ok I've still go the .0.03 firmware running cause I heard people having problems with the newer versions.
So is it true the player formats and deletes all the music when you install new firmware?
That wasn't the case on my Zen Touch I had before the micro.
Just wondering.

I'm fairly certain that it does NOT erase the data on the hard disk. During my troubleshooting of the first Micro I reloaded the firmware several times and I was pleasently surprised the music was still on the player when I was done ( it was still broken but that's a moot point)

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

IPhone 6 Plus mic/earpiec not working.

A tiny drop of water went down into my earpiece 2 weeks ago and i kept sucking out the water and i left it over night in a bag of rice. The next day the earpiece was working perfectly fine but the mic for the front facing camera, facetime, siri and voice dictation is not working. Every time i try to take a video using the front facing camera all what i hear is a muffling sound. Is this an earpiece issue? Should i change the earpiece? IS there a mic inside the earpiece?

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Trying to use a new, larger external hard drive for my Time Machine backup. However, every time I start the backup, it gets started then fails. And, I can't delete the few files that did save on the external. Sort of a catch 22. Any ideas?

Is it a USB hard drive? USB hard drives have the problem of not giving full speed if they are hooked up on the same bus as keyboards and mice. Double check your profiler to make sure that is not a problem. If it is Firewire, make sure there aren't other firewire devices in use at the same time. I recommend not only keeping a Time Machine backup, but also a clone, and if you do use Time Machine, to make sure the Time Machine drive or partition is at least twice the size of the original drive.

How do I use my i-pod touch as a mic for my ps3, how do I use my i-pod touch as a mic for my ps3

How do I use my I-Pod Touch as a mic for my ps3 system?

Sure wish I was more patient. What I ended up doing was temporarily reactivating the phone since I knew it worked after I initially stopped using it. I downloaded the apps I wanted then I turned it off and reactivated my iphone. All appears to be well but I will file your instructions away for possible future reference. Thanks a bunch!
Date: Sun, 10 Feb 2013 15:48:20 -0700
From:
To: >Personal email address deleted<
Subject: Re: How do I use my deactivated Droid 2 as a media player? - Re: How do I use my deactivated Droid 2 as a media player?
Re: How do I use my deactivated Droid 2 as a media player?
created by tikibar1 in DROID & DROID 2 by Motorola - View the full discussion
See if this works to bypass the activation screen: On the Welcome screen with the 'touch the Android to begin' icon, tap each of the four corners of the screen, starting with the top left, i.e.:- Tap the top left corner of the screen, then- Tap the top right corner of the screen, then- Tap the bottom right corner of the screen (just above the grey bar), then- Tap the bottom left corner of the screen (just above the grey bar) Wait a few seconds and you should see the home screen
Message was edited by: Verizon Moderator

Delete MIC

Similar Messages

Maybe you are looking for