Delete number range which is not initial

Dear All,
Request to kindly do let us know how can we delete a number range which does not have status initial.
regards,
mahesh.

Hi,
When you go to No Range screen for e.g. MMNR,
here click on Change Status button and make current number as zero and then save
Then come back and click Change Interval and delete

Similar Messages

For object XABBELEGNR , number range interval does not exist OMJ6

Dear all
I want to enter only the value between 1 to 5 in GR/GI Slip No for T.code Mb01,but it is not allowing it is showing as For object XABBELEGNR , number range interval does not exist OMJ6.
Kindly let me know how to proceed,so that i can enter value between 1 to 5 in that field.
regards
M.Chandra mohan

hi
u just go to tcode omc1.
activate gr/gi slip for plant
then create number range group code and assign it to plant ,storage location and movenent type combination.
Then u can create the intervals thru OMJ6.
Hope it helps
rewrad if useful
Rohit

Deletion of Request which are not updated to data target

hi,
I want to all PSA data whether it is updated or not In our project this is being done by Using a Process chain, But it is not deleting the request which are not updated to any data target or failed, I have selected both the check boxes
Only successfully booked requests
Only requests with errors, not updated in any data target
but even after selecting this check box it is not deleting the failed request, can any one tell me why it is so.
Any help in this would be highly appreciated.

Try to do it without checking any of the checkboxes...
Regards,
Luis

Object ROUTING_N number range 01 does not exist

My students all have this error, "Object ROUTING_N number range 01 does not exist", when they create and save routings. I tried to configure it using transaction code OP8B and OP62 as someone else suggested here. However, it still doesn't work. Anyone can help? Thanks a lot!

It didn't work, either.

For object RV_BELEG , number range interval does not exit

I am receiving this error when trying to generate billing document type L2 for a newly created company code.
Exisiting company codes are generating billing documents so obviously this is to do with a company code related definition.
Any thouhgts ?
-Mark

Please check if the error is
"For object RV_BELEG , number range interval does not exit"
"For object RV_BELEG , number range interval <b>10</b> does not exit"
10 used as an example here you may be getting any 2-digit alpha-numeric value in stead of 10.
Also Check
If you are using
Include program : RV60AFZZ
Routine: USEREXIT_NUMBER_RANGE
If so then for each plant you have assign a number range for each billing type (L2- here).
Thanks,
Ashish

For Object RV_BELEG, number range SD does not exist

Dear Gurus,
I have created a sales order VA01 with 1 material, and when I try to print the invoice, I have the following message of error:
'For Object RV_BELEG, number range SD does not exist'
I have checked my output types, they have been rightly assigned to the invoice forms.
OK, so If I have to assign number ranges to sales documents, how can I do that? Do I have to talk to FI guys to?
Please help.
Regards
Christian

Thats SD numbeer range that is missing. Each invoice has two numbers one in SD and one in FI.
Just go to SNRO type RV_BELEG and maintain it (the name of the number range you have in your billing document type setup in spro)
Piotr.

Number Range Customizing is not maintained in claim advance request

Hi,
When i try to create a Cliam in ESS, it throws the following error
Number Range Customizing is not maintained.
I have done the Number Ranges setting under Loans Basic Settings -Define Number Range for Reference Number as 10
and Number Range as 00000000000000000001 to 00000099999999999999
Still i am getting the same error
Can any one suggest what could be the issue
Thanks in advance
Gita

Hi Vivek,
Thank you somuch for the response.
I checked in my system, i did not find any Basic Settings under Advanced Cliams. But Basic Settings is available Under Loans
I have done the Number Range config under Laons Basic Settings: Define Number Range for Reference Number
Can you pls suggest me in SNRO, what is the object i need to check
Thanks
Gita

"Number Range Customizing is not maintained" error in Claim Advances

Hi All,
If we try to create New claim in Claim Advances It is going to the next page but throwing the following error :
Number Range Customizing is not maintained
Please help.

Hi,
Do one thing
goto tcode HRPBSIN_NMBRNG click up on Change intervals ...........
Then maintan number range screen you will get
over thre select "ADD Intervals" then over thre you need to give the New intervl for number ranges ......
give as "1 99999999999999999999" then select "Insert" and "SAVE"
And check the process again.

NUMBER RANGE OBJECT DOES NOT EXIST AT RELEASE

Hi ,
I am getting a message at production order release i.e.' NUMBER RANGE OBJECT DOES NOT EXIST' in CO01 for one order type whereas i am not getting for other.
I maintained the order type in SNRO so order is getting created.

Hi
Maintain the N Range in T code SNRO for No Range Object AUFTRAG and also in t code CO82 assign the no range maintained in SNRO to the corresponding Order type by maintaining in GROUP in CO82
Plz check and revert
Regards
Anupam Sharma

Number range 01 does not exist

Hi Gurus;
I am trying to create a Interest rate instrument with Product type 55G and Transaction type 200. Though the number range is defined in : SPRO  CFM  Basic Functions  SAP Business Partner for Financial Services  General Settings  Business Partner  Basic Settings  Number range and grouping  Define Number Ranges has No. Range as 01 but whenever I am trying to create this instrument for a particular co. code it is throwing an error as "Number range 01 does not exist". Has anybody got any idea for what to do?
Regards;
Sumanta

Your error message is related to treasury transaction number and not about business partner number range. Please check the following path and maintain number range:
FSCM-TRM-Transaction manager-Money Market-Transaction Management-Transaction types-Define number ranges
Transaction Code : TAC1.
If this will not solve your error please try to have a look at the detailed error message and get back to the forum.
thanks,
Kumar

Number range "PO" does not exists *****Classic

Hi Friends,
We are in SRM 5.5 and classic mode is on and we require backend PO to be created. We have replicated all data from backend and trying to create a PO (ECDP Direct Material) and when we click the create button in 'Process Pur Order' it does not allow to create a PO and gives error "No range PO does not exist". The same error is thrown while we convert an accepted Bid into a PO from Bidding engine. We have made the following settings.
Classic mode is on.
internal No Range "PO" created in SRM under shopping cart and follow on document.
Defined trnsc type ECDP and assigned this no range PO to it. It is Active.
Defined External no range "PO" in ECC B/E client with matching range. (Marked external)
Defined Doc Type ECDP in ECC and assigned this no range to it.
In SRM under "Define Number Ranges per Backend System for Follow-on Documents" Maintained Log Sys as ECC Backend client and "PO" in PO number range.
Also all relavent attributes are maintained including BSA.
Is there any sttings which are missing how can we locate the problem. Any help in this would be highly appreciated.
Also post this are there any special tips for PO Creation and transfer from Bidding Engine in Classic Mode? where can I find the links?
Answers will be surely rewarded. Thanks
Hussain

Hi Guys,
appologies to reply late. Actually the resolution is taken from the SDN itself with little changes.
What we resolved is to fool the system by passing an ACC with a dummy cost centre.
use ECC BADI u2018BBP_BADI_EXTREQ_OUTu2019 to assign a standard ACC but with a dummy cost centre.
the SRM process for direct material is hardcoded hence this converts the direct procurement into indirect. The SRM SHC will contain the cost assignment tab.
Now when you process this document and generate a PO the document type should be ECPO and then it will pick up the number range defined under "Shopping Cart and follow-on documents".
**For a Direct Material system is hardcoded to look for a local number range irrespective of your scenario.
Now while creating a PO from SRM use BADI BBP_CREATE_BE_PO_NEW to check if the dummy cost centre exists then remove the CC and the ACC before creating the backend PO. The ECC PO will be that of direct material type.
Thanks
Hussain

How do I delete a contact which is not in my contact list or anywhere else?

I need to delete contact information (email addresses and names) on my iPhone which keep coming up every time I type a remotely similar name in Mail, but isn't in my contact list.
I tried searching for the name and then the associated email address using the iPhone but came up with no result. I searched for the name and then the associated email address inside of my HP HDX-18t (Vista Ultimate 64bit) but came up with no result. I tried searching for the name and then the associated email address using the iPhone but came up with no result. I searched for the name and then the associated email address inside of my Yahoo account (using my Vista PC, not the iPhone) but came up with no result. I searched for the name and then the associated email address inside of all of my other email addresses and devices but came up with no result.
These names and the associated email addresses show up only in my iPhone and absolutely nowhere else. I tried Restoring my iPhone and that did not resolve the problem. Using the iPhone I tried going to Settings - General - Reset - Erase All Content and Settings. This did not solve the problem.
Every time I've ever sent an email to an email address and received a response from that email address that email address and name associated with the response has been stored someplace in the phone but no place else. This is a major pain because every time I try to send an email to one of my actual contacts I have to either type out their full name or flick through a stream of contacts which are not in any of my sources. This means I cannot send an email quickly (I'm using an iPhone so I should be used to a lack of speed, huh?) and am often lost in a sea of names and email addresses I cannot eliminate.
How do I get rid of this? I want all of the names and addresses which are not in any of my other locations gone! These are not even in my iPhone Contacts or even in the Sent email folders so there must be a way to delete them without their coming back!?!?!???!??!
Thanks all who answer with solutions which serve to solve the problem.
Message was edited by: monkeyman_stones
Message was edited by: monkeyman_stones
Message was edited by: monkeyman_stones
Message was edited by: monkeyman_stones

Try logging into your Yahoo account from a computer, search out the contact you are trying to delete and manually correct or delete the bad contact.
The bad information might be hidden as a second address or other contact information (or misspelled) and not be showing up on the iphone but will pull up the address anyway.
I had one old address in a contact that kept pulling up each time i tried to email him. The new address was there, but the old address was what the phone kept showing. When I edited the contact info from my computer the old address went away, and the new address started poping up.

Billing Type Number range ( Accounting doc not getting generated )

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y suggest as U R G E N T.
Regards,
Danny.

Hi
Check with t-code VOFA. Select the Billing document type, and Pick Detail Button.
Here you can see one field as Posting Block, check whether it is checkedup. If it is Checked you need to release the document manually. It Indicates whether the system blocks automatic transfer of the billing document to accounting.
Also check for the AcctDetermProc.
Hope it may work.
Award if useful to you.

Need to delete Transport system , which is not domain controller

I need to delete transport system on machine which is not domain controller .
our domain controller system is not avalible now .
how can i delete the transport system on my machine as domain controller system is not avaliable .
Please let me know what can i do ??
Thanks,
Asc

Hi,
Logon to any system which is in your transport path in client 000. Then in stms, go to Overview ---> Systems. Here you can find all the systems in your transport path. You can also find the domain controller which you have configured as before.
Now, goto Extras----> Delete TMS Configuration.
After deleting, logon to system which you want to make as domain controller in client 000. when you execute stms, now it will ask for new stms setup, which you might be aware of.
If you need more guidance, let me know.
Thanks,
Sailesh K

0FISCPER : number range object does not exist

Hi,
We have got this error while trying to repair the infoobject :0FISCPER in RSD1.I have tried doing the repair but it did not work.I tried to create a new no range by snro but i was not able to do that.
Can some pl help

Hi
Use RSRV for this purpose
There is a tab of master data in that u find lot many test even u can pull all elementary tests tab to the right side and perform all the tests or even u can pull one among the all tests ie number range interval to the right side enter your infooobject name and execute it and then press correct errors
thanks
puneet

Delete number range which is not initial

Similar Messages

Maybe you are looking for