Delete obsolete causing issue with archivelog backups......or is it?

Hi, hoping someone will have the answer for me.
Oracle 10g R2 on Windows 2003 R2 Sever.
The start of my RMAN script runs, i do crosschecks and delete obsolete backups from type disk. My redundancy is set to 1. I then run compressed backups of the datafiles and archivelogs with 2 channels. This leaves me with two days of full backups on disk (i have months worth on netbackup) the only problem is that one of the archivelog channel backups from the previous day is missing when i know it was there before the delete obsolete was run.
here is the script:
run{
CROSSCHECK BACKUP;
CROSSCHECK archivelog all;
CROSSCHECK COPY;
CROSSCHECK backup of database;
CROSSCHECK backup of controlfile;
delete noprompt obsolete device type disk;
run {
allocate channel ch1 type disk format 'Z:\backup\rman\orcl\%d_%T_%U';
allocate channel ch2 type disk format 'Z:\backup\rman\orcl\%d_%T_%U';
backup as COMPRESSED BACKUPSET
     format='Z:\backup\rman\orcl\full_%d_%T_%U'
     tag='full_DBbackup_ris'
     database;
backup as COMPRESSED BACKUPSET
     format='Z:\backup\rman\orcl\arch_%d_%T_%U'
     tag='full_ARCHbackup_ris'
archivelog all not backed up delete all input;
sql "alter database backup controlfile to trace as ''Z:\backup\rman\orcl\controlfile_backup_trace.txt''";
release channel ch1;
release channel ch2;
This is my (simplified) list of backups on disk:
Full_day1_chan1
Full_day1_chan2
Arc_day1_chan1
Arc_day1_chan2
Full_day2_chan1
Full_day2_chan2
Arc_day2_chan1
It looks like channel2, days2, archivelog backup is missing. Is this correct? If not does anyone have an idea how to fix this?
thanks in advance.
Steven.

Hi Steven,
The data backed up by rman is written to backup pieces.
Are you missing pieces containing archive logs?
Could it be there was only 1 arc file available so the second channel could not create any backup piece?
Did you could check the output of the backup in v$rman_output?
Regards,
Tycho

Similar Messages

Rman backup command hangs for datafile ,works with archivelogs backup.

Issue is archivelogs backup is going fine ,But when we go for datafile backup its hanging there from oracle side as not able to give file handle.
RMAN session started with debug it gives only
DBGRPC: ENTERED krmqgns [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: looking for work for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: commands remaining to be executed: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: CMD type=backup cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: 1 STEPstepid=1 cmdid=1 status=STARTED [expect.cpp/673]
16:00:40.19 DBGRPC: krmqgns: no work found for channel default (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: (krmqgns) [expect.cpp/673]
16:00:40.19 DBGRPC: EXITED krmqgns with status 1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxpoq - returning rpc_number: 17 with status: STARTED16 for channel sqlbt_ch1 [expect.cpp/673]
16:00:40.19 DBGRPC: krmxr - sleeping for 10 seconds [expect.cpp/673]
Is any body seen this type of message from rman.
Thanks
Shirish

OK. Did you miss the second Oracle document?
RMAN Debug For Backup Shows "krmxr: sleeping for x seconds" [ID 458259.1]
Also a ton of information here :
RMAN backup database as copy from file system to ASM diskgroup very slow
and here :
RMAN Error > Please assist!
and here :
RMAN and Amazon Web Services
http://oravdba.blogspot.com/2011_01_01_archive.html
Best Regards
mseberg

MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)

Hello,
I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
Thanks in advance for any advice!
Regards.

Thanks for the reply.
I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
//This code does not result in a flashing animation
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
//However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
function overClip(e:MouseEvent):void
   myClip.filters = [myDropShadowFilter];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
function outClip(e:MouseEvent):void
   myClip.filters = [];
   myTween = new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
   myTween = new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
Thanks again!
Message was edited by: Dafunkz

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Reader causing issues with dropped underscores in courier new font

When converting a microsoft word document in 2013 or 2007 to a PDF is causing issues with dropped underscores. It only seems to happen in courier new. For instance if I have _someCode, when converting this over to a PDF file I will sometimes see _someCode and sometimes I will see someCode. If I open this file in a different pdf reader then it looks correct 100% of the time. If I copy and paste into another application then the underscore shows. This is a major issue for people putting code into a PDF document as underscores are important and courier new is what we often use.

I love how quick you are to throw Microsoft under the bus. Often it is their fault. In this case I believe you are 100% wrong and absolutely short sighted to ignore this. As I said in my original email, which you apparently missed, I have tried this in multiple PDF viewers and Adobe Reader is the ONLY reader that misses the underscores. Foxit, PDF Exchange and Sumatra all render it perfectly. Adobe reader missed 6 underscores in my document that has 18 underscores. 30% of the time in this document Adobe Reader makes the underscore invisible. And if I switch the zoom to 100% instead of 148% (which is the default for me for some reason) then Adobe Reader misses 7 of them. This doesnt occur in the other readers. Blame Microsoft all you want but the simple fact is that Adobe Reader has issues reading courier new's underscores. It needs to be fixed.

I have issues with icloud backup.

Hi,
I am facing issues with icloud backup, i have successfully backed up data from iphone 5s to icloud with contacts, notes, calender, reminders etc.
Unfortunately i can not see the same information after logging in online from browser. After two days the data is restored to one year back icloud back up on my iphone 5s.
Need help on this.

A backup of an iPhone using iCloud does not result in the ability to log in to iCloud and view the information (i.e., to see the actual data that was backed up). You can go on your iPhone to Settings > iCloud > Storage > Manage Storage > device name and see how much storage the latest backup is occupying and when it was done.
Things like Contacts that are viewable when logging in to iCloud.com are the result of having Settings > iCloud > Contacts (as an example) turned on to sync - which is a different thing than a backup.
The results of an iCloud backup are only rely viewable when restored back to an iOS device. I'm not sure any of that explanation helps with your current problem but it might help clarify the terminology that Apple uses.

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
FireFox Web browser will not run
I get issues with the computer running very slowly
I have already turned off the transparency option in settings. Any ideas??
Cheers
Matt
MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

Do you have more than one OS on the Mac?
You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
A SMC Reset or PRAM/NVRAM reset may also help.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Startup key combinations for Intel-based Macs - Apple Support

I'm having issues with iCloud backup with comcast since iO6 update

I'm having issues with iCloud backup with comcast since iO6 update. I'm able to back via work wifi but not at home. Any ideas?

Hi BmoreHunter.
     As far as using the bridge mode method you'd need to see what CLJDOhas to say, as that user is the only one that I see in this thread who used this method. The method that worked for me is different. I went out and bought a new modem. This made the most sense to me since the firmware in the unit that comcast gave me had issues and I am paying to rent the thing, I figured that I'll save some money if I just buy my own.
     I ended up purchasing a motorola SURFboard eXtreme (model SB6121) for $70 (happened to be on sale) from my local Target. For another $7 I was able to secure a 2yr warranty against failure, which was my only hesitation in buying vs renting.
     This modem should work just fine for you since you are a comcast customer. If you decide to go with a different modem, the important thing is to make sure that you purchase a modem that is compatible with the technology that your ISP (in this case comcast) uses. Also DOCSIS 3.0 is the "flavor" of cable modem you want as it will give you better performace than DOCSIS 2.0 devices (such as an older Motorola SURFboard).
     Once you buy the modem you will have to call comcast and have them add the modem to your account. They'll ask for the MAC address of the modem, then send a re-set signal to it, so make sure you are home when you call and can connect/disconnect the modem as needed. After your modem is added to your account and up and running you can then connect your new AirPort Express to the modem (via ethernet cable) and you should be all set!

Is it possible to restore a deleted photo on iPad with out backup?

Is it possible to restore a deleted photo on iPad with out backup? My friend accidentally delete his photo on a iPad and he didn't make a backup before, can it be restore?
I have google it, but found nothing and hope that someone here can help me.

If you have enabled Photo Stream, you may have a copy there.

Pre-n enabler seems to cause issues with lock up/beach ball

I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
UGGHHHHHHH!!!
Peter

I have this same problem. I reported a bug to apple bug id#4990056
Here is what i wrote:
10-Feb-2007 10:36 PM Brooks Roy:
Summary:
I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
Steps to Reproduce:
With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
I do not have any special configuration on my linksys, just MAC based wireless authentication.
When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
Expected Results:
I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
Actual Results:
See above.
Regression:
It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
Notes:
I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

Using "Restrict by app" in change query causes issues with Search Results

Hello!
I am hoping some experienced SP admin can help me out. I am having issues with the relevance ranking for my search results web part.
I created a Wiki (OOTB) within a site collection and on the home page of the Wiki I was looking to apply a Search Box and Search Results web part for easy searching. I wanted to ensure the search results were restricted to the scope of the pages within the
wiki. I did the following after adding the 2 web parts:
Entered edit mode for the page
Started to edit the Search Results web part
Under Properties for Search Results clicked on "Change Query"
Navigated to BASICS and clicked "Switch to Quick Mode"
For Select Query, picked "Wiki (System)" option
For Restrict by app, picked "Specify a URL" and input the wiki URL "http://webapp.com/sites/sitecollection/wiki"
Click OK
The web part has 6 automatic results when I hit the page. These are the only 6 pages in my wiki. When I search a word or title of a page, they are not ranked in order or relevance. The ordering is static to what was being shown before the search, but the
keywords I'm searching are bold. With out the taking the steps above, I can easily search these pages and have them ranked appropriately so I'm not too sure what I'm doing wrong.
Other Details
The pages have been crawled and can be searched from anywhere else in SP.
I am only a site collection admin for this specific site collection.
I other than the steps above, I have not made any changes or customization to the search web parts; they are both out of the box SP.
The SP Farm admin we unable to pin point what the root cause is either.

Hi Mikael,
Sorry for the wait, I was unable to post pictures, which i felt would better describe my issue.
Could you output the query template you are ending up with?
If you can tell me how to accomplish this, then I can provide it. Please keep in mind that I am only a site collection admin.
Also, is the ranking/sorting for your webpart set to ranking?
When looking at the web part settings, I didn't see an option to modify the ranking. Unfortunately, some sites in my intranet are down now so I can't even double check. Once it's back up, I will verify this as well.
And how do you know they are ranked incorrectly?
I wanted to display an image showing what I meant by this. As the wiki is down, I'll do my best with words. When I visit the wiki home page, I already have the search and search results web parts there. Without searching anything, the search results
web part displays 6 pages that are available in the wiki. When I search, I expect to see the most relevant result at the top. similar to the following:
*Search result from another section of the intranet site.*
What I receive instead is the same list of wiki pages, in the same order. The most relevant result
is not moved to the top like in the image above, but I can see that the word "rush" is highlighted in bold. I hope this helps.
If you need more of a description, please let me know.
Thank you

Exchange upgrade causing issues with internal wiri...

Recently our exchange was upgraded to accommodate bt infinity and at the same time our broadband started playing up. we called bt and I spent 1.5 hours checking and re checking equipment with the call center. Tests were done with the hub at either end of the internal wiring. All the tests were still showing faults even with hub connected to the test socket. They asked me to leave connected for 24 hours while they monitor the line. They promised to call me back which they did not. I called them again the following day to be told I should have left the hub in the test socket which I was not told the previous day. I then had to wait 48 hours while they monitored the line this time in the test socket. All the tests still showed the fault was still there so an engineer called out.
The hub was still in the test socket when engineer arrived and the first thing he did was hook up his test equipment to the test socket and he stated there and then that there was nothing wrong with the line but it had been throttled down. 2 minute phone call and 10 minutes later broadband was back and working perfectly at the test socket. He checked the internal extention and the faults were being thrown up by an extension that has been in place for 10 years +. He stated to me that the new equipment installed in the exchange was more advanced and did more line checks so, although this equipment has been used for Internet with BT for 10 years it is no longer adequate.
All of this I find understandable but the whole way that BT handled this from day 1 of my first call has been appalling. BT openly admitted that the original engineer calls were handled badly and we were credited £9 for the lack of services we had for overly long time. However we are now, 2 months after this, faced with nearly £130 charge for the engineer visit which, looking back with the info I have now, was completely unnecessary. Had the engineers on the phone bothered to reset the line while hub was in the test socket when they were allegedly monitoring it for 48 hours they could have told me there were no faults on their equipment up to the socket and I would have sorted out the internal wiring myself. Even now I can find mention on the Internet of old wiring causing issues but no specific posts to do with exchange upgrades potentially meaning that you need to upgrade internal wiring or mention by the BT call center itself on any of the calls I made to them. All I was told was that everything up to the main box is BT and everything after that mine but since we have made no changes to the wiring we did not think it was applicable until the engineer arrived and told us what he told us then. Yesterday I called Bt again around 9am to dispute the charge. I was informed that because the fault was with our equipment the charge stands. I explained all of the above and I had my case put to the review team. I was told I would get a call back within 4 hours which I did but the phone rang 3 times and as I answered they hung up. I then got a text saying they had tried to call and asked for me to call back which I did to be told that his computer wasn't working. He took my details and said someone would call me back which no one did. I chased again to be told that someone would definitely call me that day. No one did. I chased again today to be told the decision still stands. He has put to final review and promised a call back within 5 days. Until this is resolved direct debit is cancelled. To the letter of the contract we have with BT this is our charge to pay I know that but this could have been avoided if the information was out there on the net, if the original checks done over the phone were done correctly or if I had been told this directly by Bt themselves prior to the engineer being called out which is why I am posting this here so hopefully no one else falls into this trap.

You're right I'm not connected to the BT infinity cabinet. But the BT Infinity cabinets all still route back through the exchange that I am connected to -
http://www.ichilton.co.uk/blog/phones/faster-broadband-bt-infinity-fibre-to-the-cabinet-coming-to-in...
Quote :
What this modem does is connects using VDSL from your home to the VDSL cabinet using the existing copper wires, on to the DSLAM, back to the exchange (over the fibre) and on to BT’s core network.
Your phone line is then still terminated in the original cabinet for telephony (using the cross connect between the old and new cabinets I mentioned above) and back to the exchange over the original multi pair copper cable as it always has done.
http://www.robertos.me.uk/html/fttx.html
Quote:
FTTC involves BT Openreach installing a new street cabinet near to the existing one and linking the two. They run optical fibre from the exchange to the new cabinet then link individual lines from the old cabinet to the new one and back to get VDSL2 onto the copper connection to the premises. The PSTN phone connection continues to operate over the pre-existing cable from the old cabinet to the exchange. It does not get put onto the fibre connection.
In other words the linkage is Exchange >> Old >> DSLAM in New >> Old >> Premises. (Traffic in both directions of course!)
Presumably the equipment in the exchange cannot stay as it is and is upgraded in the process?

8.3 causing issues with safari, "Safari could not open the page because server stopped responding"

Since my upgrade to 8.3 there are several issues with many apps when they are trying to download information.
When I go to Safari and open i.e. msn.com. it tries for over 60 seconds. then I get the error:
Safari could not open the page because server stopped responding.
I have a iPhone 6 plus with 113 gig and 65 gig available
This same issue is causing problems when downloading articles on facebook and instagram app.
We also noticed this same issue on Macbook Air, and iMac, iPad 2, and iPhone 5s.
I also have the Mac Pro without these issues but it is connected by ethernet instead of wireless.
Is wifried back and now plaguing all devices?
I selected mac because, I was tried of all the PC issues with new updates. It seems mac is now lowering its quality to that of PC.
We need a fix for this ASAP!

I have tried resetting my Iphone 6 Plus by holding both the off and select buttom. This did not help.

Whitespace in User Account Name causes issues with various functions

I've run into a few issues with users who have whitespace in their account names (for example, a user account name that was: "Joe Smith"). Generally, I think this is a result of windows interpreting the last name as a parameter when it tries to
run a certain function. One place where this occurs and is easily replicated is in the "Troubleshoot Program Compatibility Wizard" which gives an error about permissions, another place this occurs is in the dx9 web installer which gives an error
message concerning advpack.dll
In both of these cases I've been able to 'fix' the issue by relocating the TEMP and TMP environment variables to a folder like C:\TEMP, however I still have some issues with other installers and programs such as the 3rd party Cordova build program and the
android sdk which both get stumped by spaces in the user account name. From my understanding there is no way to change a user account name (not just the name which displays but the name which Windows reads) without deleting the account and copying often several
gigabytes of files and settings over to a completely new account. Is this correct? Is there a way to remove the whitespace from an account name without these hackish workarounds? Is there anyway to report this as a bug to Microsoft in the hopes that they either
remove support for usernames with whitespaces or come up with some way to make their internal features like the Compatibility Wizard operate correctly in these (fairly common) install environments? It's an incredibly pesky bug to identify....

1. Spaces are allowed but not recommended. I would avoid using space(s) in account names.
2. I do not understand what you have prevented from changing user name.
3. For problems with 3rd pty programs ask support/forum of respective software vendors.
4. If you feel like addressing Microsoft, use
http://support.microsoft.com/contactus/?ln=en-us
Regards
Milos

Web Logic 10.3 upgrade causes issues with escaped characters in JSP.

We recently upgraded our application servers from Weblogic 9.2 to Weblogic 10.3 and we are having an issue with escaped characters in a JSP code. Here is an example of what we are seeing:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
This code works in Weblogic 9.2. In Weblogic 10.3 we have to make the following changes:
var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
Thanks, Tom

Hi:
I have resolved the issue with the following in the jspx page.
Put an
<jsp:scriptlet>
response.setContentType(“text/html; charset=UTF-8”);
</jsp:scriptlet>
Inside the <f:view> on the jspx file.
Please refer the link http://www.oracle.com/global/il/support/tip/nlss11061.html for more details. It is helpful.
Thanks & Regards
Sridhar Doki

Delete obsolete causing issue with archivelog backups......or is it?

Similar Messages

Maybe you are looking for