Delete orignal after making changes in iPhoto 11

When I compare the Master and Previews folders I find both the original and the "corrected" copies of the same photo. Is there a way to delete the original without doing a folder by folder comparison? And is it safe to delete directly from the Masters folder or is there another way to do it?

If I revise my revision of a photo, will iPhoto make another copy so the database will have 3 copies of the photo, the original and both revisions?
No. Just the Master and the current revision.
If I dragged a revised photo to the desktop, went back into iPhoto and deleted the photo and then imported the photo from the desktop back into iPhoto, would iPhoto treat the imported photo as an original so there would only be one copy in the database, located in the Master's folder?
Yes.
But a couple of notes: If you drag the images to the desktop you'll lose a lot of metadata, best to export them.
It's a lot of work, introduces a lot of complexity to the workflow and that's how data gets lost.
but I may do fewer revisions to keep the library size manageable.
Don't worry about the size of the Library. If you're concerned about Disk Space you can run an iPhoto Library from an external disk:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
You can also run your iTunes, iMovies and Final Cut Pro X material from external disks.
Regards
TD

Similar Messages

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

After Making Changes In Log4j.xml Application Needs Recompilation?

Hello,
I am using log4j in my jsp pages and for that I instantiating Logger class like this
Logger logger = Logger.getLogger("test.jsp");
{code}
And I have log4j.xml in the classpath.
I believe, priority levels can be changed and log level can be changed without re-compiling.
Change the log4j.xml and re-run jsp pages.
However I need to re-compile after making changes in log4j.xml file. Without re-compilation changes are not getting reflected.
Why I need to re-compile application in order to see the changes I have made in log4j.xml?
Appreciate any help in this regard.
Regards

This is the contents of my log4j.xml, its under WEB-INF/lib
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">

<appender name="sout" class="org.apache.log4j.ConsoleAppender">
 
 <layout class="org.apache.log4j.PatternLayout">
 <param name="ConversionPattern" value="%d [%c] %p - %m%n"/>
 </layout>
</appender>
<root>
 
 <priority value="off"/>
 <appender-ref ref="sout"/>
</root>
</log4j:configuration>

SWF works originally but won't work after making changes, then saving

I have two small flash elements that are embedded into a website, and upon first exporting the swf and putting into the html in Dreamweaver, worked like a charm. After making edits to the Flash file, then exporting the swf a second time - no changes on the publish settings - upon deleting the old, then putting the new swf object into dreamweaver, they won't work. This has happened with both the flash piece on the home page, and on the "what we do page". Below are links to what's currently up, but I've made edits since those that I can't post!!
I'm completely baffled. I've even done "save as" to overwrite the original file, then replace in Dreamweaver, but nope....
carwinadvisors.com/index.php
carwinadvisors.com/what-we-do.php

Here's flash code that should work :
http://www.wyodor.net/MoreEmbed/flash.html
More Flash (video) here : http://www.wyodor.net/iFrame/
Perhaps using another sort of slideshow would solve it too:
http://www.wyodor.net/iWebBlogTest/Wyodor_1/WebBanner.html
Demo : http://www.wyodor.net/_Demo/MyHouse/Huis.html
These are the displayed shows:
http://www.wyodor.net/_Demo/Gardens/flagstones.html
http://www.wyodor.net/_Demo/Gardens/gardens.html
Check the source code to see how it's done.

Po print out after making changes in po

hi experts,
we r facing a problem ,after making a po when we edit it for additon of some more materials and take the print out ,only item that were there in po intially are coming , it is not printing all the items that are that are added i po, but po print out is coming ok ,it is showing alll the items,can anybody help why it is coming like this .points will be awarded surely

Hi
In Message determination for PO, you have an output type (eg.,NEU) for printing the changed PO.
This has to be created(if not maintained) and maintained in "Fine tuned message control" in SPRO and it should be ticked in the last column.
Try this and it should work.
Pls Revert and Reward.
Regards
Vijay

Deleting contact after making a call

how to i delete a single contact after making a call without clearing all contacts i called

You mean the "Recents" list? You can't, it's all or nothing.

Script Error after making changes

First, I am not a website designer. I own a website and have
been making minor (text) changes using Contribute since I didn't
need to know html. I started a couple of years ago just using the
trial and never had any problems with it, but about a month ago
bought it...CS3.
After sitting down and making some changes, I published and
then got:
Script Error
Line: 17
Char: 1
Error: Object required
Code: 0
URL;
http://www.dirty-dog.com/contact/
I've looked at the source code, found line 17, but have no
idea what I'm supposed to do. I think this is an easy fix, right?
Can someone explain in "plain english" what I need to do?
Also, one day I somehow fixed it...just by moving stuff
around on the page. I also made some changes to other pages,
thought they were published (looked at all of them), but when I
went back yesterday, all the changes were gone?!? How is that
possible??? I'm going to try to paste the code here....

This is the contents of my log4j.xml, its under WEB-INF/lib
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE log4j:configuration SYSTEM "log4j.dtd">
<log4j:configuration xmlns:log4j="http://jakarta.apache.org/log4j/">

<appender name="sout" class="org.apache.log4j.ConsoleAppender">
 
 <layout class="org.apache.log4j.PatternLayout">
 <param name="ConversionPattern" value="%d [%c] %p - %m%n"/>
 </layout>
</appender>
<root>
 
 <priority value="off"/>
 <appender-ref ref="sout"/>
</root>
</log4j:configuration>

How to save a PDF in Acrobat XI after making changes without changing the document name

Whenever I work in Adobe Acrobat XI, I am forced to 'save as' when trying to save the changes I have just made. I am unable to save the document under the same name I have been working on it under (the way you can do in every other program). This happens every time I create form fields, merge or extract pages, add text, etc. This is extremely annoying because then I have to go into my documents, delete the old version, and then rename the document I was working on. HELP! I work in Acrobat every day creating and editing documents and there HAS to be a better way!

CTRL+F brings up the search bar within the document. When I go to File --> Save (or CTRL+S) I receive an error message that states "The document could not be saved. The file may be read-only, or another user may have it open. Pelase save the document with a different name or in a different folder". This message pops up for EVERY document I have modified that I try to save.

How can I regain control of .bash_profile after making changes to $PATH?

Hi,
Today, I installed Android ADB on my MBP (late 2013) and used the following guide to get it started: http://www.droidviews.com/a-comprehensive-guide-to-adb-android-debug-bridge-and- commands/ - that guide said I should make a change to ~/bash_profile in order to get the settings right. Here's what I did (copied from the link):
Open terminal window and type following: nano ~/.bash_profile
This shall open the .bash_profile file. Now enter the following line to define ADB path. export PATH=${PATH}:~/android-sdk-macosx/tools export PATH=${PATH}:~/android-sdk-macosx/platform-tools
Then, I saved and closed the terminal window.
Now, I cannot use a lot of terminal commands anymore - sudo, latex, rm, all only give me:
-bash: latex: command not found
If I try to access ~/.bash_profile, I get the following error:
-bash: /Users/richard/.bash_profile: Permission denied
I tried this:
RMBP:~ richard$ echo $PATH
{PATH}:/Users/richard/android-sdk-macosx/platform-tools
which only shows me that I have changed the path.
Is there any way I can regain access to the .bash_profile file and control over the Terminal in general?
Any help would be highly appreciated, thanks in advance!

I solved the problem, it seems, by doing the following:
I found the defective .bash_profile file by using Omni Disk Sweeper, and deleted it right away. Someone else here in the support forum had a similar problem and solved it this way, so that's how I got the idea. The Terminal works nicely now and no other signs of trouble have come up yet.

Firefox will not respond after restarting my computer after making changes in the cookies and history settings

I make some changes with cookies and cleared my history for today...and then restarted my computer...now firefox will not open...will not respond...should I uninstall firefox and then reinstall it?
If I uninstall firefox will the changes I made with the cookies and my history be reversed?
If I were to uninstall and then reinstall firefox will I loose my bookmarks if I do this? or does firefox remember them...so when I reinstall the previous bookmarks are reinstalled too?

Does Firefox starts up when you first open it after rebooting the computer but hangs the next time you try to start it? If so, then there's a [https://bugzilla.mozilla.org/show_bug.cgi?id=1005487 bug] in Firefox 29 where Firefox hangs on exit when the setting "Clear history when Firefox closes" is selected, so that you get an "already running but not responding" error the next time you ttry to start it. In that case, end the firefox.exe process in the Windows Task Manager (or reboot the computer) then reset your Firefox Privacy options and UNCHECK the option "Clear history when Firefox closes". See this article for details:
[[Settings for privacy, browsing history and do-not-track]]
If that's not the problem and Firefox still not open even after rebooting the computer then try starting in Firefox Safe Mode by holding down the shift key while starting Firefox. If Firefox starts then see the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to narrow down the cause.

Why are my addresses disappearing on my events after making changes?

I have addresses disappearing on my calendar after I make a change to an event. For instance: I make an error with a house number so I make the change. After I click DONE, the whole address vanishes. Or, if I insert a phone number in notes, the address disappears. The only fix is to add the address last so that no entry causes the problem.

I have addresses disappearing on my calendar after I make a change to an event. For instance: I make an error with a house number so I make the change. After I click DONE, the whole address vanishes. Or, if I insert a phone number in notes, the address disappears. The only fix is to add the address last so that no entry causes the problem.

Deleting files after making a DVD

Once I have a .dvdproj file, and I have burned a disc, I can delete all files relating to it and go back and burn another disc if I live this file right?

Absolutely not!!!
Your iDVD project is just a container with pointers to the actual media used in the project. If you change, move, rename or delete the iMovie, photos or audio clips used in the project, you will lose the project because iDVD will not be able to locate the needed files.
To save your project for another burn, don't delete anything until you make a disk image file of your project. You do this from within your iDVD project.
Open your project and select File->Save as Disk Image. You will need to specify where to save the disk image file. I usually save mine to the desktop so that I can test it, but you can save it anywhere you want.
The process looks just like the burn process, and will take just as long for the encoding, but the end result is a disk image file, not a burned DVD disk:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6733.html
Once the disk image file has been created, click on it to mount it and open your DVD Player application. The 'disk' will play and you can check to see that it is ok.
Now, you have an exact copy of your iDVD project, with all the needed media files encoded into it.
You can NOW safely delete all the files used in it without losing the ability to burn DVDs of this project whenever you want. The disk image file is a great backup for your iDVD projects and generally takes up much less drive space. It can also be moved to another drive or computer.
You burn more DVDs from the disk image file using Disk Utility (Applications->Utilities->Disk Utility:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8729.html
http://support.apple.com/kb/HT2087?viewlocale=en_US
Post back if any of this is not clear or if you have further questions.
By the way, if you have already deleted the files and would like to create a disk image file for future burning of disks, you can do this from a burned DVD disk itself.

How to validate data in editable ALV report after making changes

Hi Folks,
My requirement is to display data in ALV format with quantity field is editable. Once we get the data in display mode only quantity field is enabled right. I am going to make changes to that quantity field and updating that modifed value to the database table. Before updating databse table i want to validate the data for perticluar field which I edidted(Quantity).
Can you guide me on this.
Currently I am using FM: GET_GLOBALS_FROM_SLVC_FULLSCR and calling the method CHECK_CHANGED_DATA.
I want to validate the quantity data.
If I entered negative value like -100 instead of 100. It should validate and show some popup screen or message.
Pls guide me on this or give some code to do that.
Thanks&Regards,
Surendra

Hey Surendra,
Check if this helps: Link:[Click here|Edit Field in Oops Alv;
There are many posts available for this requirement. Please look SDN/web for same.
Regards,
Santosh

WebRFC - clearing cache after making changes in SAP

I'm finding that as I make changes to my Functional Modules in SAP, and then try to test them from Personas, I can not pick up the new version until I log right out of NWBC and the log back in again .... there has to be a faster way .... right?
Any tips much appreciated.
Regards.
patrick

No, you don't need to clear the cache. You only have to reconfigure your domain through the psadmin menu.
Nicolas.

Cannot save two home pages on FF 24 after making changes as instructed, reseting FF and enabling cookies as it instructs. How can I do this? I can do it in IE

I have had remote control of my computer with specialists at Silicon Valley and they cannot change the necessary settings and have them saved either. Have talked to numerous people at Xfinity (I am changing from AT&T to Comcast). Xfinity cannot help either. They said to email Firefox.
I can save my home page as well as another one for emails in IE for Yahoo but not Xfinity. Xfinity has tab come up that says "enable cookies." I have done everything to get the two home pages to open upon startup of FF in Xfinity but cannot do it.
Is there any help?

Did you try to set the home pages via Firefox/Tools > Options > General?
If you only open both pages in tabs then you can click the "Use Current Pages "button.
*https://support.mozilla.org/kb/How+to+set+the+home+page
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Delete orignal after making changes in iPhoto 11

Similar Messages

Maybe you are looking for