Delete overlapping/duplicate records from cube

Hi All,
Kindly let me know how to delete overlapping requests from a cube. Actually the cube is getting loaded from varuous infosources, but there are records which get duplicated and the are not wanted , then hiow to delete the duplicate records from the cube.
Regards,
dola

I think what arun is perfectly right....
use DSO for consolidation of various requests..from diferenet infosources...
Now load from DSO to cube...and it is very much possible...though will require little work.
Delete duplicate records option is usually used for master data.With transacdtion data i don't think its advisable.
Regards,
RK

Similar Messages

  • How to delete the duplicate records in a table without promary key

    I have a table that contains around 1 million records and there is no promary key or auto number coulums. I need to delete the duplicate records from this table. what is the simple effective way to do this.

    Please see this link:
    Remove duplicate records ...
    sqldevelop.wordpress.com

  • How to delete duplicate records in cube

    Hi,
    can u help me how to delete the duplicate records in my cube
    and tell me some predifined cubes and data sourcess for MM and SD modules

    Hi Anne,
    about "duplicate records" could you be more precise?.
    The must be at least one different Characteristic to distinguish one record from the other (at least Request ID). In order to delete Data from InfoCubes (selectively) use ABAP Report RSDRD_DELETE_FACTS (be carefull it does not request any confirmation as in RSA1 ...).
    About MM and SD Cubes see RSA1 -> Business Content -> InfoProvider by InfoAreas. See also for MetadataRepository about the same InfoProviders.
    About DataSources just execute TCode LBWE in you source sys: there you see all LO-Cockipt Extrators.
    Hope it helps (and if so remember reward points)
    GFV

  • Getting duplicate records in cube from each data packet.

    Hi Guys,
    I am using 3.x BI version. I am getting duplicate records in cube. for deleting these duplicate records i have written code. still it is giving same result. Actually i have written a start routine for deleting duplicate records.
    These duplication is occurring depending on the number of packets.
    Eg: If the number of packets are 2 then it is giving me 2 duplicate records.
    If the number of packets are 7 then it is giving me 7 duplicate records.
    How can i modify my code so that it can fetch only one record by eliminating duplicate records? Or any other solution is welcomed.
    Thanks in advance.

    Hi  Andreas, Mayank.
      Thanks for your reply.
      I created my own DSO, but its giving error. And I tried with the stanadard DSO too. Still its giving the same error as could not activate.
    In error its giving a name of function module RSB1_OLTPSOURCE_GENERATE.
    I searched in R3 but could not get that one.
    Even I tried creating DSO for trial basis, they are also giving the same problem.
    I think its the problem from BASIS side.
    Please help if you have any idea.
    Thanks.

  • Deleting duplicate records from different data packets in BI data source.

    Hi,
    I am getting same (duplicate) records from different data packets in BI data source, after completion of extraction.
    I tried to store key fields of the first data packet in an internal table. But this internal table is not carrying the previous data at the time of extraction of second data packet.
    Is there any other way to remove duplicate records after completion of extraction.
    Thanks in advance.

    I did not extensively worked in BI routenes. But I recon there will be routene which will het executed before data mapping part there will be a start routene in which you can validate the existense of data before beeing passed from data source to cube.
    Hope this helps,
    Regards,
    Murthy.

  • How to delete Duplicate records from the informatica target using mapping?

    Hi, I have a scenario like below: In my mapping I have a source, which may containg unique records or duplicate records. Source and target are different tables. I have a target in my mapping which contains duplicate records. Using Mapping I have to delete the duplicate records in the target table. Target table does not contain any surrogate key. We can use target table as a look up table, but target table cannot be used as source in the mapping. We cannot use post SQL.

    Hi All, I have multiple flat files which i need to load in a single table.I did that using indirect option at session level.But need to dig out on how to populate substring of header in name column in target table. i have two columns Id and Name. in all input file I have only one column 'id' with header like H|ABCD|Date. I need to populate target like below example. File 1                                    File2     H|ABCD|Date.                      H|EFGH|Date.1                                            42                                            5  3                                            6 Target tale: Id    Name1     ABCD2     ABCD3     ABCD4     EFGH5     EFGH6     EFGH can anyone help on what should be the logic to get this data in a table in informatica.

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How to delete a particula record from InfoObject

    Dear All,
    I got some problem situations and would like some suggestions from any of you.
    <b>Problem detail</b>- one process chain was failed due to could not activate an ODS-A
    - ODS-A and ODS-B contained InfoObject-0BP_GUID
    - errors were found and referred to the InfoObject-0BP_GUID.
    - The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
    I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
    I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
    Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
    Any suggestion would be appreciated.
    Thank you very much.
    -WJ-

    Unfortunately you cant delete data without inpacting the data in the.  This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
    If you still wish to do, proceed as follows:
    1. Delete the data in cube first.
    2. Delete the particular record from the master data table.3
    3. Reload the data to the ODS / cube.
    Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
    (a) " not all master data could be deleted
    (b) "the master data can not be deleted".
    Ravi Thothadri

  • How to remove duplicates records from output ?

    how to remove duplicates records from output ?  i used delete adjacent but duplicates records are coming again ..suggest me

    hi shruthi,
    thanks for ur answer ..but duplicates records coming again
    here is my code >> plz check it out
    *& Report  ZCRM_TROUBLE_TICKET
    REPORT  zcrm_trouble_ticket.
    TYPES : BEGIN OF ty_qmih,
            qmnum TYPE qmnum,
            equnr TYPE equnr,
            iloan TYPE iloan,
            ausvn TYPE ausvn,
            ausbs TYPE ausbs,
            auztv TYPE auztv,
            auztb TYPE auztb,
            iwerk TYPE iwerk,
            END OF ty_qmih,
            BEGIN OF ty_qmel,
            qmnum TYPE qmnum,
            qmtxt TYPE qmtxt,
            indtx TYPE indltx,
            priok TYPE priok,
            strmn TYPE strmn,
            strur TYPE strur,
            ltrmn TYPE ltrmn,
            ltrur TYPE ltrur,
            objnr TYPE qmobjnr,
            arbpl TYPE lgwid,
            vkorg TYPE vkorg,
            vtweg TYPE vtweg,
            spart TYPE spart,
            END OF ty_qmel,
            BEGIN OF ty_ihpa,
            parnr TYPE i_parnr,
            parvw TYPE parvw,
            objnr TYPE qmobjnr,
            END OF ty_ihpa,
            BEGIN OF ty_crhd,
            arbpl TYPE arbpl,
            objid TYPE cr_objid,
            END OF ty_crhd,
            BEGIN OF ty_crtx,
            ktext TYPE cr_ktext,
            objid TYPE cr_objid,
            END OF ty_crtx,
            BEGIN OF ty_qmfe,
            fecod TYPE fecod,
            fegrp TYPE fegrp,
            qmnum TYPE qmnum,
            END OF ty_qmfe,
            BEGIN OF ty_qmur,
            urcod TYPE urcod,
            urgrp TYPE urgrp,
            urtxt TYPE urstx,
            qmnum TYPE qmnum,
            END OF ty_qmur,
            BEGIN OF ty_iloa,
            tplnr TYPE tplnr,
            iloan TYPE iloan,
            END OF ty_iloa,
            BEGIN OF ty_output,
            qmnum TYPE qmnum,
            equnr TYPE equnr,
           iloan TYPE iloan,
            ausvn TYPE ausvn,
            ausbs TYPE ausbs,
            auztv TYPE auztv,
            auztb TYPE auztb,
            iwerk TYPE iwerk,
            qmtxt TYPE qmtxt,
            indtx TYPE indltx,
            priok TYPE priok,
            strmn TYPE strmn,
            strur TYPE strur,
            ltrmn TYPE ltrmn,
            ltrur TYPE ltrur,
           objnr TYPE qmobjnr,
           arbpl TYPE lgwid,
            vkorg TYPE vkorg,
            vtweg TYPE vtweg,
            spart TYPE spart,
            parnr TYPE i_parnr,
            parvw TYPE parvw,
            arbpl TYPE arbpl,
           objid TYPE cr_objid,
           arbpl1 TYPE arbpl,
            ktext TYPE cr_ktext,
            fecod TYPE fecod,
            fegrp TYPE fegrp,
            urcod TYPE urcod,
            urgrp TYPE urgrp,
            urtxt TYPE urstx,
            tplnr TYPE tplnr,
            END OF ty_output.
    DATA : it_qmih TYPE STANDARD TABLE OF ty_qmih,
           it_qmel TYPE STANDARD TABLE OF ty_qmel,
           it_ihpa TYPE STANDARD TABLE OF ty_ihpa,
           it_crhd TYPE STANDARD TABLE OF ty_crhd,
           it_crtx TYPE STANDARD TABLE OF ty_crtx,
           it_qmfe TYPE STANDARD TABLE OF ty_qmfe,
           it_qmur TYPE STANDARD TABLE OF ty_qmur,
           it_iloa TYPE STANDARD TABLE OF ty_iloa,
           it_output TYPE STANDARD TABLE OF ty_output,
           wa_qmih TYPE ty_qmih,
           wa_qmel TYPE ty_qmel,
           wa_ihpa TYPE ty_ihpa,
           wa_crhd TYPE ty_crhd,
           wa_crtx TYPE ty_crtx,
           wa_qmfe TYPE ty_qmfe,
           wa_qmur TYPE ty_qmur,
           wa_iloa TYPE ty_iloa,
           wa_output TYPE ty_output.
    INITIALIZATION.
      REFRESH : it_qmih,
                it_qmel,
                it_ihpa,
                it_crhd,
                it_crtx,
                it_qmfe,
                it_qmur,
                it_iloa,
                it_output.
      CLEAR:     wa_qmih,
                 wa_qmel,
                 wa_ihpa,
                 wa_crhd,
                 wa_crtx,
                 wa_qmfe,
                 wa_qmur,
                 wa_iloa,
                 wa_output.
    start-of-selection.
      SELECT  qmnum
              equnr
              iloan
              ausvn
              ausbs
              auztv
              auztb
              iwerk
              FROM qmih
              INTO  TABLE it_qmih.
      SORT it_qmih BY qmnum .
      DELETE ADJACENT DUPLICATES FROM it_qmih COMPARING qmnum equnr iloan ausvn ausbs auztv auztb iwerk.
      SELECT   qmnum
               qmtxt
               indtx
               priok
               strmn
               strur
               ltrmn
               ltrur
               objnr
               arbpl
               vkorg
               vtweg
               spart
               FROM qmel
               INTO TABLE it_qmel
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      SORT it_qmel BY qmnum.
      DELETE ADJACENT DUPLICATES FROM it_qmel COMPARING  qmnum
                                                         qmtxt
                                                         indtx
                                                         strmn
                                                         strur
                                                         ltrmn
                                                         ltrur
                                                         objnr
                                                         arbpl
                                                         vkorg
                                                         vtweg
                                                         spart.
      IF it_qmel IS NOT INITIAL.
        SELECT parnr
               parvw
               objnr
               FROM ihpa
               INTO TABLE it_ihpa
               FOR ALL ENTRIES IN it_qmel
               WHERE objnr = it_qmel-objnr.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_ihpa COMPARING  parnr
                                                         parvw
                                                         objnr.
      IF it_qmel IS NOT INITIAL.
        SELECT arbpl
               objid
               FROM crhd
               INTO TABLE it_crhd
               FOR ALL ENTRIES IN it_qmel
               WHERE objid = it_qmel-arbpl.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_crhd COMPARING  arbpl
                                                         objid.
      IF it_qmel IS NOT INITIAL.
        SELECT ktext
               objid
               FROM crtx
               INTO TABLE it_crtx
               FOR ALL ENTRIES IN it_crhd
               WHERE objid = it_crhd-objid.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_crtx COMPARING ktext
                                                        objid.
      IF it_qmih IS NOT INITIAL.
        SELECT fecod
               fegrp
               qmnum
               FROM qmfe
               INTO TABLE it_qmfe
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      ENDIF.
      SORT it_qmfe BY qmnum.
      DELETE ADJACENT DUPLICATES FROM it_qmfe COMPARING fecod
               fegrp.
      IF it_qmih IS NOT INITIAL.
        SELECT urcod
               urgrp
               urtxt
               qmnum
               FROM qmur
               INTO TABLE it_qmur
               FOR ALL ENTRIES IN it_qmih
               WHERE qmnum = it_qmih-qmnum.
      ENDIF.
      SORT it_qmur BY qmnum.
      DELETE ADJACENT DUPLICATES FROM  it_qmur COMPARING urcod
                                                         urgrp
                                                         urtxt.
      IF it_qmih IS NOT INITIAL.
        SELECT  tplnr
                iloan
                FROM iloa
                INTO TABLE it_iloa
                FOR ALL ENTRIES IN it_qmih
                WHERE iloan = it_qmih-iloan.
      ENDIF.
      DELETE ADJACENT DUPLICATES FROM it_iloa COMPARING tplnr
                                                        iloan.
      LOOP AT it_qmih INTO wa_qmih.
        wa_output-qmnum = wa_qmih-qmnum.
        wa_output-equnr = wa_qmih-equnr.
       wa_output-iloan = wa_qmih-iloan.
        wa_output-ausvn = wa_qmih-ausvn.
        wa_output-ausbs = wa_qmih-ausbs.
        wa_output-auztv = wa_qmih-auztv.
        wa_output-auztb = wa_qmih-auztb.
        wa_output-iwerk = wa_qmih-iwerk.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmel INTO wa_qmel WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-qmtxt = wa_qmel-qmtxt.
        wa_output-indtx = wa_qmel-indtx.
        wa_output-priok = wa_qmel-priok.
        wa_output-strmn = wa_qmel-strmn.
        wa_output-strur = wa_qmel-strur.
        wa_output-ltrmn = wa_qmel-ltrmn.
        wa_output-ltrur = wa_qmel-ltrur.
       wa_output-objnr = wa_qmel-objnr.
       wa_output-arbpl = wa_qmel-arbpl.
        wa_output-vkorg = wa_qmel-vkorg.
        wa_output-vtweg = wa_qmel-vtweg.
        wa_output-spart = wa_qmel-spart.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_ihpa INTO wa_ihpa WITH KEY objnr = wa_qmel-objnr.
        wa_output-parnr = wa_ihpa-parnr.
        wa_output-parvw = wa_ihpa-parvw.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_crhd INTO wa_crhd WITH KEY objid = wa_qmel-arbpl.
        wa_output-arbpl = wa_crhd-arbpl.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_crtx INTO wa_crtx WITH KEY objid = wa_crhd-objid.
        wa_output-ktext = wa_crtx-ktext.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmfe INTO wa_qmfe WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-fecod = wa_qmfe-fecod.
        wa_output-fegrp = wa_qmfe-fegrp.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_qmur INTO wa_qmur WITH KEY qmnum = wa_qmih-qmnum.
        wa_output-urcod = wa_qmur-urcod.
        wa_output-urgrp = wa_qmur-urgrp.
        wa_output-urtxt = wa_qmur-urtxt.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
        READ TABLE it_iloa INTO wa_iloa WITH KEY iloan = wa_qmih-iloan.
        wa_output-tplnr = wa_iloa-tplnr.
        APPEND wa_output TO it_output.
        CLEAR wa_output.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM it_output  COMPARING        qmnum
                                                                  equnr
                                                                  ausvn
                                                                  ausbs
                                                                  auztv
                                                                  auztb
                                                                  iwerk
                                                                  qmtxt
                                                                  indtx
                                                                  priok
                                                                  strmn
                                                                  strur
                                                                  ltrmn
                                                                  ltrur
                                                                  vkorg
                                                                  vtweg
                                                                  spart
                                                                  parnr
                                                                  parvw
                                                                  arbpl
                                                                  ktext
                                                                  fecod
                                                                  fegrp
                                                                  urcod
                                                                  urgrp
                                                                  urtxt
                                                                  tplnr.
    *CALL FUNCTION 'STATUS_TEXT_EDIT'
    EXPORTING
      CLIENT                  = SY-MANDT
      FLG_USER_STAT           = ' '
       objnr                   =
      ONLY_ACTIVE             = 'X'
       spras                   = en
      BYPASS_BUFFER           = ' '
    IMPORTING
      ANW_STAT_EXISTING       =
      E_STSMA                 =
      LINE                    =
      USER_LINE               =
      STONR                   =
    EXCEPTIONS
      OBJECT_NOT_FOUND        = 1
      OTHERS                  = 2
    *IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    *CALL FUNCTION 'READ_TEXT'
    EXPORTING
      CLIENT                        = SY-MANDT
       id                            =
       language                      =
       name                          =
       object                        =
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
    tables
       lines                         =
    EXCEPTIONS
      ID                            = 1
      LANGUAGE                      = 2
      NAME                          = 3
      NOT_FOUND                     = 4
      OBJECT                        = 5
      REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    *IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *ENDIF.
    *LOOP AT IT_OUTPUT INTO WA_OUTPUT.
    *WRITE : / WA_OUTPUT-qmnum,
             WA_OUTPUT-equnr,
             WA_OUTPUT-iloan,
             WA_OUTPUT-ausvn,
             WA_OUTPUT-ausbs,
             WA_OUTPUT-auztv,
             WA_OUTPUT-auztb,
             WA_OUTPUT-qmtxt,
             WA_OUTPUT-indtx,
             WA_OUTPUT-strmn,
             WA_OUTPUT-strur,
             WA_OUTPUT-ltrmn,
             WA_OUTPUT-ltrur,
             WA_OUTPUT-objnr,
             WA_OUTPUT-arbpl,
             WA_OUTPUT-parnr,
             WA_OUTPUT-parvw,
             WA_OUTPUT-objid,
             WA_OUTPUT-ktext,
             WA_OUTPUT-fecod,
             WA_OUTPUT-fegrp,
             WA_OUTPUT-urcod,
             WA_OUTPUT-urgrp,
             WA_OUTPUT-urtxt,
             WA_OUTPUT-tplnr.
    *ENDLOOP.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
      BIN_FILESIZE                    =
          filename                        = 'E:\CRM1.TXT'
      FILETYPE                        = 'ASC'
      APPEND                          = ' '
         write_field_separator           = '|'
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
        TABLES
          data_tab                        = it_output
      FIELDNAMES                      =
    EXCEPTIONS
      FILE_WRITE_ERROR                = 1
      NO_BATCH                        = 2
      GUI_REFUSE_FILETRANSFER         = 3
      INVALID_TYPE                    = 4
      NO_AUTHORITY                    = 5
      UNKNOWN_ERROR                   = 6
      HEADER_NOT_ALLOWED              = 7
      SEPARATOR_NOT_ALLOWED           = 8
      FILESIZE_NOT_ALLOWED            = 9
      HEADER_TOO_LONG                 = 10
      DP_ERROR_CREATE                 = 11
      DP_ERROR_SEND                   = 12
      DP_ERROR_WRITE                  = 13
      UNKNOWN_DP_ERROR                = 14
      ACCESS_DENIED                   = 15
      DP_OUT_OF_MEMORY                = 16
      DISK_FULL                       = 17
      DP_TIMEOUT                      = 18
      FILE_NOT_FOUND                  = 19
      DATAPROVIDER_EXCEPTION          = 20
      CONTROL_FLUSH_ERROR             = 21
      OTHERS                          = 22
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Deleting the duplicate records

    Hi all,
    I have some duplicate records in the PSA . and i want to delete the duplicate records before the data is entered into the data target. Can anybody tell me how to achieve this.
    Actually i need to achieve this  by using the ABAP code.
    Thanx & Regards,
    RaviChandra
    Edited by: Ravichandra.bi on Mar 5, 2012 3:37 PM

    Hi Ravi,
    If its a full load to the PSA and because of it you are getting duplicate records and you want to eliminate them,
    you can do what  Anshul and Durgesh suggested.
    Write the code in the start routine of the transformation to your target
    SORT SOURCE_PACKAGE BY KEY1 KEY2 KEY3. "(The key will be the key of your target)
    DELETE ADJACENT DUPLICATES FROM SOURCE_PACKAGE
          COMPARING KEY1 KEY2 KEY3.
    Hope this helps
    Regards,
    Joe

  • How to delete the single record from the  ODS

    HI,
       I want to DELETE  the particular record from ODS.. how to delete that..
    plz give me the solution.. it's urgent..
    with regards
    @jay

    Hi Prakash,
        You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
    Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
    Regards,
    Prakash

  • Importing and Updating Non-Duplicate Records from 2 Tables

    I need some help with the code to import data from one table
    into another if it is not a duplicate or if a record has changed.
    I have 2 tables, Members and NetNews. I want to check NetNews
    and import non-duplicate records from Members into NetNews and
    update an email address in NetNews if it has changed in Members. I
    figured it could be as simple as checking Members.MembersNumber and
    Members.Email against the existance of NetNews.Email and
    Members.MemberNumber and if a record in NetNews does not exist,
    create it and if the email address in Members.email has changed,
    update it in NetNews.Email.
    Here is what I have from all of the suggestions received from
    another category last year. It is not complete, but I am stuck on
    the solution. Can someone please help me get this code working?
    Thanks!
    <cfquery datasource="#application.dsrepl#"
    name="qryMember">
    SELECT distinct Email,FirstName,LastName,MemberNumber
    FROM members
    WHERE memberstanding <= 2 AND email IS NOT NULL AND email
    <> ' '
    </cfquery>
    <cfquery datasource="#application.ds#"
    name="newsMember">
    SELECT distinct MemberNumber
    FROM NetNews
    </cfquery>
    <cfif
    not(listfindnocase(valuelist(newsMember.MemberNumber),qryMember.MemberNumber)
    AND isnumeric(qryMember.MemberNumber))>
    insert into NetNews (Email_address, First_Name, Last_Name,
    MemberNumber)
    values ('#trim(qryMember.Email)#',
    '#trim(qryMember.FirstName)#', '#trim(qryMember.LastName)#', '#
    trim(qryMember.MemberNumber)#')-
    </cfif>
    </cfloop>
    </cfquery>
    ------------------

    Dan,
    My DBA doesn't have the experience to help with a VIEW. Did I
    mention that these are 2 separate databases on different servers?
    This project is over a year old now and it really needs to get
    finished so I thought the import would be the easiest way to go.
    Thanks to your help, it is almost working.
    I added some additional code to check for a changed email
    address and update the NetNews database. It runs without error, but
    I don't have a way to test it right now. Can you please look at the
    code and see if it looks OK?
    I am also still getting an error on line 10 after the routine
    runs. The line that has this code: "and membernumber not in
    (<cfqueryparam list="yes"
    value="#valuelist(newsmember.membernumber)#
    cfsqltype="cf_sql_integer">)" even with the cfif that Phil
    suggested.
    <cfquery datasource="#application.ds#"
    name="newsMember">
    SELECT distinct MemberNumber, Email_Address
    FROM NetNewsTest
    </cfquery>
    <cfquery datasource="#application.dsrepl#"
    name="qryMember">
    SELECT distinct Email,FirstName,LastName,MemberNumber
    FROM members
    WHERE memberstanding <= 2 AND email IS NOT NULL AND email
    <> ' '
    and membernumber not in (<cfqueryparam list="yes"
    value="#valuelist(newsmember.membernumber)#"
    cfsqltype="cf_sql_integer">)
    </cfquery>
    <CFIF qryMember.recordcount NEQ 0>
    <cfloop query ="qryMember">
    <cfquery datasource="#application.ds#"
    name="newsMember">
    insert into NetNewsTest (Email_address, First_Name,
    Last_Name, MemberNumber)
    values ('#trim(qryMember.Email)#',
    '#trim(qryMember.FirstName)#', '#trim(qryMember.LastName)#', '#
    trim(qryMember.MemberNumber)#')
    </cfquery>
    </cfloop>
    </cfif>
    <cfquery datasource="#application.dsrepl#"
    name="qryEmail">
    SELECT distinct Email
    FROM members
    WHERE memberstanding <= 2 AND email IS NOT NULL AND email
    <> ' '
    and qryMember.email NEQ newsMember.email
    </cfquery>
    <CFIF qryEmail.recordcount NEQ 0>
    <cfloop query ="qryEmail">
    <cfquery datasource="#application.ds#"
    name="newsMember">
    update NetNewsTest (Email_address)
    values ('#trim(qryMember.Email)#')
    where email_address = #qryEmail.email#
    </cfquery>
    </cfloop>
    </cfif>
    Thank you again for the help.

  • Delete 50 Million records from a table with 60 Million records

    Hi,
    I'm using oracle9.2.0.7 on win2k3 32bit.
    I need to delete 50M rows from a table that contains 60M records. This db was just passed on to me. I tried to use the delete statement but it takes too long. After reading the articles and forums, the best way to delete that many records from a table is to create a temp table, transfer the data needed to the temp table, drop the big table then rename temp table to big table. But the key here is in creating an exact replica of the big table.I have gotten the create table, indexes and constraints script in the export file from my production DB. But in the forums I read, I noticed that I haven't gotten the create grant script, is there a view I could use to get this? Can dbms.metadata get this?
    When I need to create an exact replica of my big table, I only need:
    create table, indexes, constraints, and grants script right? Did I miss anything?
    I just want to make sure that I haven't left anything out. Kindly help.
    Thanks and Best Regards

    Can dbms.metadata get this?
    Yes, dbms_metadata can get the grants.
    YAS@10GR2 > select dbms_metadata.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST') from dual;
    DBMS_METADATA.GET_DEPENDENT_DDL('OBJECT_GRANT','TEST')
      GRANT SELECT ON "YAS"."TEST" TO "SYS"
    When I need to create an exact replica of my big table, I only need:
    create table, indexes, constraints, and grants script right? Did I miss anything?
    There are triggers, foreign keys referencing this table (which will not permit you to drop the table if you do not take care of them), snapshot logs on the table, snapshots based on the table, etc...

  • Delete a user record from oracle db

    Hi,
    Can anybody share me a custom workflow which deletes a user record from the oracle db.The user does exist in SUN IDM.
    Please help me.
    Thanks in advance.

    You can use a Trigger and UTL_FILE to write to a file (on the server).
    Example:
    create or replace trigger test_file
      after insert or delete or update on test_case 
      for each row
    declare
    v_logfile utl_file.file_type;
    begin
      v_logfile := utl_file.fopen('\myfiles','test_file.log','a');
      if inserting then
         utl_file.put_line(v_logfile,'Inserting to table');
      elsif deleting then
         utl_file.put_line(v_logfile,'Deleting to table');
      else
         utl_file.put_line(v_logfile,'Updating to table');
      end if;
      utl_file.fclose(v_logfile);
    end test_file;
    I want to generate a log file in which i want to dump some useful messages, when anyone does a dml operation on a table, and also, i want to have a switch like YES or NO (may be an environment variable,,) if i switch it to YES the log file should get generated, if NO then, no log file will be generated..
    can anyone help, how can you do this task ?
    thanks a lot in advance..
    srini

  • How to delete some of records from wf_notifications table any API Name?

    Hi All,
    I want to delete some of records from wf_notifications table , can any one tell API' name and Back end delete process.
    Thanks,
    Ramu
    Edited by: Ramu on Mar 20, 2013 5:42 AM

    Hi ,
    I hv done below script, now it's working fine.
    DECLARE
    CURSOR csr_transaction_id IS
    SELECT   hat.transaction_id,
             hat.item_type,
             hat.item_key,
             ppx.employee_number,
             hat.section_display_name
      FROM   hr_api_transactions hat, per_people_x ppx
    WHERE   hat.process_name = 'HR_PERSONAL_INFO_JSP_PRC'
             AND hat.selected_person_id = ppx.person_id
             AND ppx.employee_number IN
                      ('100024773',
                       '100024820',
                       '100024859',
                       '100024879',
                       '100024902',
                       '100024937',
                       '100025137',
                       '100026470',
                       '610014755',
                       '610017039')
    order by  ppx.employee_number;
    BEGIN
      dbms_output.put_line('***Deleted all Transactions  and Notifications of below Employee Personals Tranactions ***');
       FOR my_cur_v IN csr_transaction_id
       LOOP
       /*Delete all Transaction_id's in hr_api_transactions,hr_api_transaction_steps,hr_api_transaction_values and hr_api_transaction_steps_bk tables */
        hr_transaction_swi.delete_transaction
                              p_transaction_id =>my_cur_v.transaction_id,
                              p_validate => hr_api.g_false_num
        wf_engine.abortprocess  (
                                  itemtype => my_cur_v.item_type,
                                 itemkey => my_cur_v.item_key
         /* Deleted all Notification_id's and item_key's in wf_item_activity_statuses,wf_items,wf_item_attribute_values,wf_notifications     Table */                     
         wf_purge.items (
                          itemtype => my_cur_v.item_type,
                         itemkey => my_cur_v.item_key
        dbms_output.put_line('Emp No --'||my_cur_v.employee_number||'Transaction_id :'||my_cur_v.transaction_id||'Emp Personal Info :'||my_cur_v.section_display_name||
                              'Item Type :'||my_cur_v.item_type|| 'Item Key :'||my_cur_v.item_key); 
       END LOOP;
       commit;
    EXCEPTION
    WHEN OTHERS THEN
      dbms_output.put_line('hr_transaction_swi.delete_transaction api goest to exception block'    ||sqlcode|| '  '||sqlerrm);
    END;  
    /thanks,
    Ramu

Maybe you are looking for

  • Itunes won't install and keeps popping up with an error, any ideas on how to fix this?

    Alright so I had recently gotten an iPhone and it didnt recognize when i plugged it in. I tried a bunch of stuff and eventually deleted iTunes and anything along with it. When I tried to reinstall an error box kept popping up. And this happens EVERY

  • How to execute a .reg file in a task sequence using MDT 2013

    Hi, Im trying to add a couple of desktop icons to my custom images during deployment using MDT 2013. I have a .reg file with all commands inside it but I am struggling to get these to work. the .reg file is located on my deployment server and is in a

  • No network, WiFi, 3G after iOS 7.0.6 Update (iPhone 4s)

    Following my update to iOS 7.0.6 which completed with no apparent problems, my phone has lost all connectivity to my network, WiFi and 3G services. 'Carrier Settings' no longer appears in my Settings menu, and in 'About' I cannot view IC, or IMEI num

  • Non-english input in Wine[SOLVED]

    Hi, Non-english input characters in Windows apps under Wine appear either as blanks or as question marks. Any how-to is welcome . Meanwhile, I've googled an interesting advice (for Cyrillic): $ sudo ln -s en_US.UTF-8 /usr/share/X11/locale/ru_RU.UTF-8

  • Open pdf file in flex

    Hi Guys, I want to open pdf file in Flex (Web Application). I am unable to open it, Please guide and help me. Thanks in advance.. Rangrajan.