Delete Overlapping Request from InfoCube.

Hello,
I am using process Type "Delete Overlapping Request from infocube" in this I am selecting object type as a "DTP"
Under "Delete Selection" I am selecting following
1. Only Delete Requests from same DTP
2. Only Delete Full DTP request
3. Only Delete DTP Requests from Same Source
I am using "Full Load" in my DTP.
My requirements are like I need to delete old data and load new data every day in to a cube for that I am using this process type.
If anybody have better solution please let me know.
Thanks,

Also
I am not deleting Index OR Not creating Indexs while using process type "Deleting overlapping request InfoCube"
what will be the impact on the cube?
How many index will have infocube?
If the cube having more than one index if i delete index, which index will be deleted?
Thanks,

Similar Messages

Duplicate records: Process : Delete Overlapping Requests from InfoCube

Hi Experts,
We are loading data in standard costing cube with standard available option Full upload. In our process chain we have included process type "Delete Overlapping Requests from InfoCube". In our scenario we always load yesterday and today's data. In this case after loading yesterday's data, we need to check and delete the overlapping requests and then upload todays data.
Many a times this deletion process is failing due to message "Couldn't lock cube" because it is already locked by user "ALEREMOTE". This cause system to duplicate the records in cube.
How we can avoid this?
Alok

I tried running again and it again failed. Checked in SM12 and found this entry
800 ALEREMOTE 08/14/2007 E RSENQ_PROT_ENQ CREA_INDX ZCCA_C11 DATATARGET CREA_INDX ###################################### 0 1
This locked is not released since 14th. Is there way to remove the lock using some process.

Process Maintenance: Delete Overlapping Requests from InfoCube

Hi Experts,
How can I open Process Maintenance: Delete Overlapping Requests from InfoCube Screen? What's T-code? Is that in Process Chain? Please tell me that....
Thanks in advance,

Hi
'Delete overlapping request' is an option(its a process type) in the process chains..
RSPC>Process types>Load Process and post process folder--->Delete overlapping request from the infocube..
here you can have more options like 'source systems are same',and infosources are same etc...
How to delete most recent request in a Cube by using process chain
Hope it helps
Thanks,
Teja
Edited by: Teja badugu on Apr 28, 2008 11:35 AM

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

"Delete Overlapping Requests from InfoCube" in a Process Chain

Dear all,
I encountered a problem when I building the process chain in BW 3.0.
In a process chain, I schedule daily an InfoPackage to load data to an InfoCube and then delete the previously loaded data by the same InfoPacckage from the InfoCube.
For example, I have 2 InfoPacakge, A and B, and schedule to load data to InfoCube C. In the process chain, I scheduled daily the following tasks in sequence:
- Delete index in InfoCube C
- Load data through InfoPackage A to InfoCube C
- Delete duplicated request previously loaded through InfoPackage A in InfoCube C
- Load data through InfoPackage B to InfoCube C
- Delete duplicated request previously loaded through InfoPackage B in InfoCube C
- Create index in InfoCube C
However, when I activate the process chain, a warning message is prompted: No type "Delete Overlapping Requests from InfoCube" process allowed infront of process "Execute InfoPackage" variable ZPAK_4GMFI
Would anyone tell me why such warning message is prompted?
Many thanks!
Best regards,
Marcus

Hi all,
Re Ranjan:
I previously config the process chain like that:
(1)   Delete index in InfoCube C
(2)   Load data through InfoPackage A to InfoCube C
(3a) Delete duplicated request previously loaded through InfoPackage A in InfoCube C
(3b) Load data through InfoPackage B to InfoCube C
(4)   Delete duplicated request previously loaded through InfoPackage B in InfoCube C
(5)   Create index in InfoCube C
where (3a) and (3b) is executed simultaneously.
However, (3b) often reports error. I guess it may be due to the parallel run of (3a) and (3b). So that's why I set the process chain to be executed in serial.
Re Jacob:
I found that the process chain can be run even a warning message is prompted when activating the process chain!.
Thanks you all for your kind support!!
Best regards,
Marcus

Delete overlapping requests from infocube

Hi ALL,
I have loads to infocube from 5 diffrent infopackages loading adhocly or randomly from same source sytem and same infosource.
Note:infopackages have dynamic selections.(ex calweek,product)
My requirement: If i load infopackage-1 today,and when i load the same infopackage next time the prevoius load should be deleted .
I need the same functionality for other 4 infopackages.
So at given point of time i should have only 5 requests in the infocube.
These are the settings i have done.
1)At infopackage level i have selected option Delete existing requests : overlapping
   Without selecting any conditions like infosources,source sytem are same.
2)Added process type in the process chain delete overlapping requests from infocube
   selected option: Delete existing requests : overlapping.
   Without selecting any conditions like infosources,source sytem are same.
Are these settings are enough or is there in best way to do this .
Please suggest me ...

Kishore,
Delete overlapping requests means, delete request with same selection only. If data selection not same, i dont think it will delete any previous request.
You can select infosource, source system. No issues. System only deletes request if data coming from same infosource or from same source system for same selection.
But in your case selection changing every day or for every load. I dont think it works.... Try once in DEV.
If i understand correctly, as you only needed latest 5 requests only, why cant you delete data completely before loading / starting new set of requests...?? This is easy, quicker and better approach.
But only problem is data will not be available during loading of new set of requests.
Srini

Delete Overlapping Requests from InfoCube: Before or After the Generate Ind

Hi,
Delete Overlapping Requests from InfoCube Before or After the Generate Index of the Infocube? Why?
I think "After", but the system (transaction RSPC)suggest 1.Generate Index 2.Overlapping Requests from InfoCube ...
Thanks
Alessandro

Hi Alessandro,
Bottom Line Index will speed up the Process. While loading the Data you need to delete the Index.
Index will degrade the performence while updating or modifying DB Entries(Loading). Index will improve the performence while reading the DB(Reporting).
It's not with BW. all RDBMS need this.
Regards,
Nagesh.

Process Type - Delete overlapping requests from an Info Cube

I have read many threads on this topic, still have some questions. To give you background, I will be doing delta load (delta process chain). But before delta, I want to do setup initialization (init process chain). I want to use this process type in my init process chain to delete all data in my cube loaded from a specific ods. I cannot use delete all contents process type because many odss feed the same cube.
1.     Do you put this process type after Load Data or before Load Data. I have seen both cases in SDN forums.
2.     Variant of this process type is an info package. Does this info package have to be same as in load data step or it can be different.
3.     I want to delete all data in cube which was loaded from my ods. Term overlapping is confusing to me. Will this process type delete all data or not.
Tanks in advance.

Yes, you can do that. Goto RSPC - under process types Load Process and Post Processing, you will see DELETE OVERLAP REQUESTS FROM INFOCUBE option is there.
Select the proper check boxes like same sourcesystem, same datasource etc...
If it is one time deletion, why not do that manually?
Also check: How to delete most recent request in a Cube by using process chain
Hope it helps..

Delete overlapping requests from cube not working in processchain.

In a process chain, 'deletion of overlapping requests from the cube ' step is used.
Before this step a DTP step runs with a full update to load the cube. This process chain is scheduled every day.
Issue is, the process chain failed at the DTP step and after correcting and repeating, the step got executed.
However, the next step after the DTP,'delete overlapping requests from the cube'
gets executed but without deleting the previous day's request.
In the step details a message that 'No request for deletion were found' can be seen.
Then next day when the DTPstep is executed without any problem the 'delete overlapping requests from cube' step is successful
and the previous requests from cube are deleted.
the deletion selections in the step ' delete overlapping request from infocube' is
Delete existing requests
Conditions:
only delete requests from same DTP
Selections
Same or more comprehensive
Because of this issue on a particular day because of the presence of 2 days requests the data is getting aggregated and shown as double in the reports.
Please help.

Hi Archana,
When you delete the bad request from target and before repeating your DTP in PC, make sure the bad request deleted from table RSBKREQUEST also.
If you find the same request in table, first delete the request from table and repeat the DTP in PC.
Now Delete overlapping step should work.
As this is not the permanent solution, please raise an OSS for SAP
Regards,
Venkatesh

Delete overlapping requests from DSO

Hi Everyone!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is one, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.
Does anyone have any idea?
Thanks in advance.
Eduardo

Hi..
How could you do that since DSO has the overwrite property? For example you are loading from DSO1 or DS to DSO2.
If u ran a load that goes into DSO2. If u ran same load again it goes into DSO 2 and overwrites the previous request. for that u can verify with display data.
Is ur DSO additing the records????
Delete Overlapping Requests Only for Info cubes.
I request you to post the exact issue so that we can assist you better.
Regards....KP

Delete overlapping requests from ODS

Hi,
Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
Can we still delete overlapping request using abap code or the only way to do it is to delete data (selective deletion) in a start routine.
Any tips would be helpful

Hi ,
Try the following logic to delete the ovelapping requests from a particular data source.
*& Report ZV_DELETE_REQS                                              *
*&Description:This program is for deletion of eixsting Full requests   *
*&            from ODS                                                                     *
REPORT ZV_DELETE_REQS.
data: RSICCONT like rsiccont,
      rsseldone like rsseldone.
data: begin of i_req occurs 0,
      rnr like RSICCONT-rnr,
      end of i_req.
refresh i_req.
select * from RSICCONT UP TO 2 ROWS
                  where ICUBE = 'ZCS_D10'
                  order by TIMESTAMP descending.
i_req-rnr = rsiccont-rnr .
append i_req.
clear i_req.
endselect.
loop at i_req.
select single * from RSSELDONE where RNR eq i_req-rnr and
                  source in ('0CO_OM_OPA_5',
                             '0CS_OM_OPA_1').
if sy-subrc eq 0.
    CALL FUNCTION 'RSSM_DELETE_REQUEST'
      EXPORTING
        REQUEST                    = i_req-rnr
        INFOCUBE                   = 'ZCS_D10'
      EXCEPTIONS
        REQUEST_NOT_IN_CUBE        = 1
        INFOCUBE_NOT_FOUND         = 2
        REQUEST_ALREADY_AGGREGATED = 3
        REQUEST_ALREADY_COMDENSED = 4
        NO_ENQUEUE_POSSIBLE        = 5
        OTHERS                     = 6.
    IF SY-SUBRC <> 0.
      MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
          WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
    else.
      message i799(rsm1) with i_req-rnr 'deleted'.
    ENDIF.
    do.
      select single * from RSICCONT where ICUBE = 'ZCS_D10'
                                      and rnr    = i_req-rnr.
      if sy-subrc ne 0.
        exit.
      endif.
    enddo.
endif.
endloop.
hope it helps....
regards,
raju

Deleting overlapping request from DSO

Hi there!
Is there any function to delete overlapping requests from a DSO in process chain?
For InfoCube there is a step, but how about dso?
I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
load requests in dso.

Hi Shanthi,
I tried using info package but still req havnt delete from info cube.
It works for DTP as i can see many DTPs in list but not mine thats the issue.
Thanks from your responce. Hoping for any new suggestion.
i cant manually delete req from production as process chain runs at mid night.

Problem while deleting overlaping request from cube

Hi experts,
I have one process chain in which i have one step where i am executing one DTP to load one cube and in next step deleing overlapping requests from same cube.
i am getting error at that step "Error when deleting requests for comparison request DTPR_4CCDXZLK1OIGCVGGE1PP31Z3Y"
what could be reason?
plz help

Hello,
I guess you have not defined the overlapping variant properly.
Please goto the definition of the variant and check for the right DTP input.
Then at the bottom, select second option "Edit all Infocubes with Following Delete Selections"
Click on deletion selections -> select delete existing requests.
Also select if same datasource and source system. and importantly select the radio button as overlapping.
Then save the variant. and try to use it.
Regards,
Shashank

Unable to Delete failed requests from Infocube

Dear Experts,
I tried to uploaded the data through flat file. Since it has gone to Idle state i Killed the process. Now i Need to delete the red request from Infocube but It is not allowing me to delete the failed request. If I do so, I am getting ABAP runtime error.
Please Suggest me . Its bit Urgent
Many Thanks,
Suraj

Hi Suraj,
There is might be a deadlock detected in the system
So go the reqeust
click on the details tab
Each Package which is yellow or red has to be updated manually (right click Manual Update). This can take few minutes.
Change request status to green
Change to Status doppleclick on total status
Change from red to Delete status;back to request status
Note:
This case is only applicable, if the data are stored in PSA.

Delete overlapping requests from info cube

Hello
I am getting a issue sometimes where the process chain fails to delete a request from the cube on the conditions i have given in this process type. Now i have been digging into this but cannot find much of why would this happen.
Please can someone tell me if this is a known issue to you. Also please can someone give me some details on which program name gets generated when we pull this process type in a process chain. what i mean is what is the program running for this process chain as i want to debug and see how does this process type delete the request.
thanks

check the class CL_RSSM_REQUDEL and method IF_RSPC_EXECUTE~EXECUTE

Delete Overlapping Request from InfoCube.

Similar Messages

Maybe you are looking for