Delete planned material (MM11 / MM12)

Hello,
I have following issue:
A planned material was created via TCode MM11 or MM12 for a selected date in the future.
Now this planned material is not longer required - so the material should/must be deleted.
If there any way to do this? Offer SAP a transaction [BAPI, function module ...] to delete a planned material?
I don't find anything to delete the material
Thanks in advance for your help!
Best regards,
David

If the material is no longer required, then you can archive the material master record.
Consult with your organization and read the archiving process
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f75a80-867f-2d10-7aa6-ac164e43e89f?quicklink=index&…
Regards
Dev

Similar Messages

ALE distribution of planned material changes made using MM12

Greetings,
I have searched and come up empty-handed looking for an answer, perhaps someone in this forum can point me in the right direction. I am trying to find out if there is a tcode and idoc message type that will distribute a planned material change, prior to it's activation, while it is still in it's planned state. While in the source system, I can see these changes in mm14, I do not see the "future" values as part of the MATMAS generated by a BD10, nor as part of the ECMMAS generated by a CC92 transaction. Ideally we could allow material master changes in our source system on a future date using the same ECM number as a BOM change for example, and distribute these changes together to the target system, prior to the ECM effectivity, without further requiring a additional BD10 to be performed after the material change activation date. Does anyone have advice on this? Thank you for any info you can provide.

1. Activate change pointers
2. Customize it to check for status before activation and trigger the distribution. (I think it should generate even if the material is not activated so no customization required - but just test and confirm. It's been a while I've looked at this).
3. Maintain this in your distribution model and distribute master data accordingly.

Schedule creation of material - MM11

What is the use of schedule creation of material - MM11. In what specific need we
use schedule creation of material and in which way this get differs from MM01.
- David Boon

Hi David,
Suppose, you are planning to manufacture a new product after six months. The new product will be requiring around 300 materials. You have the data of those materials.
But, if you create all the materials using, Create--Immediately, all the materials will be available in your system immediately. It leads to confusion while creating physical inventory doc & MRP runs etc.
The best practice is, material should be available before ready to use. To achive this you schedule the creation of materials accordingly. For further information on Scheduling Material Creation, see the below link.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/ff/515bd249d811d182b80000e829fbfe/frameset.htm.
Award points if it helps.
Regards,
Madhu.

Deletion of Material groups

Hi all,
In the past we have created different material groups for each and every plant. Now we plan to standardize this for all of them.
I plan to change all old material groups to the new ones in the material master. This would update the info records, too.
I have to find a way to change the field in all POs and PRs.
Now my question:
Is there any impact with deleting the old material groups after that?
Do I need to pay regards to something else?
Thank you for your help
Tobias

Hi,
You can delete the Material group, but the system will not remove the old Material group from the Material master, PO, or any other documents untill you update the new material groups to the documents.
Table will also update with new material group once you update that.
rgds
Chidanand

Function modules or BAPI for deleting plan costs on a cost center

Hi all,
I search for a function module or bapi to delete plan costs / activity on a cost center.
At the moment I update the planning with 0, but that cause a mass of needles entries on the cost centers.
For check and posting I use the function group 6026 - BAPI_COSTACTPLN_* ,
but there is no function for deleting.
Has anyone an idea?
Thx for help - points as reward !

check
BAPI_COSTACTPLN_POSTACTINPUT   Activity Input Planning: Posting
BAPI_COSTACTPLN_POSTACTOUTPUT Activity/Price Planning: Posting
BAPI_COSTACTPLN_POSTKEYFIGURE Stat. Key Figure Planning: Postings
BAPI_COSTACTPLN_POSTPRIMCOST   Primary Cost Planning: Postings
BAPI_PDTRANSCO_POSTPRIMCOST    Transfer of Planning Data: Post Primary Costs
K40C                           CO Actual Postings, Manual
BAPI_ACC_PRIMARY_COSTS_POST    Accounting: Post Primary Costs
BAPI_COPAACTUALS_POSTCOSTDATA BAPI Operating Concern: Post Costing-Based Actua
BAPI_PRIM_COST_CHECK_AND_POST Primary Costs: Formal Parameter Check
S@meer

Report to delete planned orders

Dear Friends,
Can anyone tell me which is the transaction to run the delete from live cache to delete planned orders.
Thanks
Vinay

HI Vinay,
Yes, you can delete the planned orders from either product view (rrp3) or receipts view (rrp4). I guess, the planned orders now are coming with the 'firm' indicator and using product view you cannot delete fixed orders.
Which version you are working?
Thanks & Regards,
Jagadeesh

How to delete the material records related to storage type

Dear SAP guru's,
I got a situation that if the material "XXXXXX" exists in two different storage type (let say 001 & 002 ) and the material needs to be removed out of one (Let say 002) to avoid the picking and putaway in future.
Inorder to accomplish an above requirement we tried the below cases
Case 1: By flagged the material "XXXXXX" under storage type 002 in MM06 transaction.But it didn't restrict the system on allocating and removing the stock from /to to the storage type 002.
Case 2:After we flagged the material for deletion under storage type 002 ,we used to MM71 transaction to archive & delete the material record that assocaited with the storage type 002 completely.
I am kind of queiries to know if there is any other method or procedure available to delete the storage type associated material records in SAP.
Please guide me with the other options.Thanks.
Regards,
John.

Hi John,
Its very simple, remove the Storage type indicators from the material master - Warehouse View 1 at Stock placement & Stock removal section, with this it won't pickup or place the materials in the concerned storage type.
If you have extended this materials to more than 1 storage type, you need to do the same for all the storage types.
Reward if it is helpful.

Error While Deleting Planning Version

Hello to all!
We have problem with deleting planning versions:
1. When i try to delete planning version, i recieve ABAP Dump with CONNE_IMPORT_WRONG_OBJECT_TYPE so i can't delete any planning versions in my system
2.Then when i try to access properties of plannining version appers the message that liveCache is not avaliable
3. In addition when i try to delete whole model it deletes it but when i refresh the screen i see model which i have already deleted
Please help me to solve this problems.
Thanks in advance!!

Hello Brian!
Look through this note https://service.sap.com/sap/support/notes/781817
You should delete variant in transaction SE38 (but i dont remember what variant (but this is one of the variant in this note) exactly you should delete so try it yourself.)
Also it maybe useful to look through this note https://service.sap.com/sap/support/notes/752838

MASS DELETION OF MATERIAL RECORDS

hi frds,
is is possible to delete all the material records at single trial (mass deletion of material records).is that any t-code for this.
is any other way to do this.please advice in this regard.
your advice is consisdered valuable.
regards,
G.V.SHIVAKKUMAR

No, there is nothing that can do that.
I know there is a transaction that is able to delete all FI data, but no such transaction available for MM.

Mass Deletion of Material Master

Hi All
Please am trying to delete material master have created. i need a Tcode for mass deletion.
Thank you.

Hi,
In MM06 you can set deletion flag for materials (mara-lvorm). For multiple materials, use T. Codes MM17 or MASS.
---> Select MARA Table
---> Select multiple selection, past all material list and execute.
---> Select DF at client level from field selection tab.
To delete the Material Master records totally, use SARA. If there is posting done, then need to archieve that too.

Delete planning function in plan workbook

I had one query about how the deletion function should be used in plan workbook. in the plan workbook, the user would like to be able to delete the selected line / combination from plan workbook and plan cube. The options what I come up with is :
1. use macro to get the selected line in workbook and transfer the value to delete planning function (will be executed by clicking the button in workbook).
2. create another sheet, and require the user to enter the combination for which they want to delete and then get it deleted by clicking the button (delete planning fucntion will be triggered).
Could you please let me know if there is any better solution for this? And if would like to go with option 1, where I could get the sample or sample macro code?
many thanks
Jonathan

Hi, Jonathan
Maybe will be enough just make the key figure equal to zero and then save this value without any macros?
Regards, Igor

Planning with planning material

Hi All,
I am working on the make to stock scenario where I am working on the strategy 63(planning with planning material).
As per scenario once I entered the sales order for variant material it should consume the PIR of the planning material but it did not happen with my case. I maintained the necessary master data for both the material like consumption parameters for planning material, strategy group 63 for both the materials, planning material for the variant material and individual and collective indicator for both materials but it didn't work.
Can you please provide me the reason why it is not happening?
Thanks in advance
Lalit

hi
The system finds requirements type VSEV because the strategy group has been set to 63.
See the Table of Planning Strategy Assignments.
The requirements are passed on to MRP. The stock/requirements list (Logistics -> Production -> MRP-> Evaluations ->Stock/reqmts list) displays the information for the planning material.
The planned orders are not yet "real," because the variant product cannot be produced until after receipt of the sales order. Technically speaking, the planned orders have order type (VP). It is impossible to convert these (VP) planned orders into production orders, or to use them in a repetitive manufacturing environment. The Conversion field in the display of the planned order is not set, which indicates that it is not possible to produce this planned order.
The MRP run also creates procurement requisitions for the components
The main objective of this strategy has now been reached: procurement for the components has been triggered, even without sales orders, based on the sales forecast from Demand Management only. Procurement of the components can occur in a variety of ways. Here we are assuming that a goods receipt (for a purchase order, for example) takes place.
A sales order for a variant material is entered
· Suppose that, for this example, an order with a quantity of 90 pieces is entered with a required delivery date of today. This order can be confirmed after the first planned independent requirement date
· The consumption parameters have been maintained correctly ( Consumption mode, Bwd consumption per., Fwd consumption per.) in the planning material.
· This date and the planned independent requirements can be found.
For more information, see Consumption Strategies and Logic.
award points if useful
Regards
ramesh

MASS DELETION OF MATERIAL

Hello Guys,
I have around 5- 6 thousand materials and i need to set up a deletion flag. Is there anybody can tell me how can i set mass deletion of material.
Points awaiting and answers are highly appreciated.
Thanks
Iqbal

Hi
You will find the solution to your query by going through the following thread
Re: Deletion Flag
Cheers
Jags

Database Performance Testing Planning Material

Hi All,
Could anyone please share Performance Testing Planning Material available at any site or anyone used in any projects previously?
Would appreciate if anyone could help!
Thanks for your time!
Regards,

Hi Forstmann,
Many thanks for the information.But I require Performance Testing plan materials wher it has been performed in existing systems.
The material link what you have pasted refers to Performance tuning guide.
Regards,

Delete Planning Cost/Revenues and Balance Sheet Data

SAP Gurus,
Does anyone knows how to delete Planning data related to Cost/Revenues and Balance Sheet Under Prift Center Accounting?
I already found the Cost center side KP90 and KP91, but unable to find the Profit Center side.
Your help will be greatly appreciated.

I think KP90 / KP91 are not just for cost centers - they are to delete PCA, PA planning as well. In KP90, you can restrict deletion for given cost elements. KP91 is to delete data for all cost elements in a given planning version / fiscal year.

Delete planned material (MM11 / MM12)

Similar Messages

Maybe you are looking for