Delete pls

Delete this please, already cleared the situation.

nesk wrote:Hm, can't find anything definitive about IdentityFile
It's in man ssh_config.
nesk wrote:
Next question: how to set up keys whitelist for ssh logins?
What I have tried:
man sshd wrote:~/.ssh/authorized_keys
             Lists the public keys (DSA/ECDSA/RSA) that can be used for
             logging in as this user.  The format of this file is described
             above.  The content of the file is not highly sensitive, but the
             recommended permissions are read/write for the user, and not
             accessible by others.
So, I created /home/nesk/.ssh/authorized_keys, copied generated for this user public key there, messed it up (replaced a few letters), restarted sshd, but still can login via ssh as this user. According to manual, I shouldn't be able to? Please advise, how to configure it.
Don't copy the public key to authorized_keys: cat it or use ssh-copy-id. See this post: http://kimmo.suominen.com/docs/ssh/

Similar Messages

  • Comments/advice on my Media Server build please? - delete pls

    No replies, please delete. Thanks!

    Mkudisch, it looks like a great PC you're going to build, it looks pretty much like the one i've built a couple months ago, I'm not a master pc builder but I would like to give you a little advice about the componenets:
    CPU: Great choice, I have the same cpu.
    GPU: it looks like a great gpu, just one thing if you plan to overclock it you should buy one with better airflow (at least 2 fans), I have an asus gtx 670 4 gb.
    MOBO: great choice, probably you already now it, it is a 2011 model but if your saying it because the name says LGA 2011 it means that it is socket 2011 the one for sandy bridge-e cpus, (I have a P9X79 WS mobo)
    RAM: probably I'm wrong but as far as I know all Asus X79 mobos will only take 8gbs sticks per slot and not 16 gbs ones, you should probably look for 8x8gbs quad channel, I have G.SKILL Ripjaws Z Series 8X8gbs and they're great, if you want search for any other brand model but first check if you mobo will take 16gbs sticks per slot.
    Disks: great SSD, I've heard a lot of great things about samsung 840 PRO.
    PSU: I think you should consider at least a 1000W PSU, in case you want to add another gpu or more hdds in the future you will be already covered, Corsair it's a great brand also stay away from any Rosewill PSUs I bought a 1300w lightning series and that piece of crap exploded 30 seconds after turning it on.
    Case: don't know about that case but it looks like a great choice I have a HAF X 942.
    Also you forgot about a CPU cooler, there's a lot of great cpu coolers, I would recommend you Noctua NH-D14 SE2011 that's the one I have (and it's great if you plan to overclock you i7-3930K) just make sure the cpu cooler you buy is compatible with you cpu, if you buy Noctua NH-D14 SE2011 make sure it will fit in you case because that cooler is HUGE!.
    Well that's my advice like I told you before I'm not an expert or anything just another guy like you who built a PC similar to the one you want to build.

  • Where is stored? - Maintenance plan marked for deletion.

    Hi all in wich table is stored that a maintenance plan is fixed to delete? I can not see in table mpla ... and i don't know how toi check if the plan is marked for deletion.
    Anybody know in wich table and field is this indicator stored?
    Thanks in advance!!!

    hi Miquel,
    this is a bit tricky: the information is in table JEST (statuses).
    MPLA-OBJNR = JEST-OBJNR
    there should a status for deletion, pls. note there are system statuses and user statuses.
    hope this helps
    ec

  • Deleted cost center details ?

    hi,
    while using KS04 transaction , if user deletes any cost center , the cost center is to be populated in that report ,
    main requirement is to fetch data of deleted cost center in the hierarchy
    but the main problem is that when i delete the cost center , the detials in CSKS table will automatically deleted
    pls suggest the helpful solution

    Hi,
    Try to look BAPI_COSTELEM_GETDETAIL
    BAPI_COSTCENTER_GETDETAIL
    Regards
    Saurabh Goel

  • Delete SAP*

    hi,
    i have one client to be deleted, unfortunately all super user id have been locked.
    the only way to login to perform deletion is using sap*, understand that the id will be recreated after it is deleted.
    pls guide how i go about deleting sap* id at database / os level.
    tq
    regards,
    kent

    Hi,
    yes it is.
    you can not show the other client data from SE16.
    just write the z - report in any client and paste my query and just change the client number with XXX (i.e the client which all super ids are locked)
    if you want to execute this query direct to AS400 you need i series navigator.
    but query syntax is different.
    connect to sap host with i series navigator now expand database and right click on database and click RUN SQl scripts.
    now enter following query
    DELETE FROM R3<SID>DATA.USR02 WHERE BNAME = 'SAP*' AND MANDT = 000;
    where SID is your sap system id
    regards,
    kaushal

  • Service material deletion indicator

    Hi Freinds,
    there is a SES to delete. when i select the perticular SES and select delete, the system says that the service material is no longer use. but it has not been deleted. pls help me to solve this issue.
    Sujith

    Hi Sujith ,
    Goto AC03 , enter ur activity number.
    Then Click on Purchasing Data and check the status.
    Remove block indicator if any and try once again.
    Regards
    Ramesh Ch

  • Report server error 1075

    I have installed 9iAS v 10222 enterprise edition on p4 machine.
    9iAS installed ok.
    but the report server installed by default with name
    Rep60_machine_name
    but application are using different name for the report server
    so I uninstalled the default report server by using the command
    rwmts60 -uninstall Rep60_machine_name.
    Now I installed the report server with the desired name using command
    rwmts60 -install newname -tcpip
    set the system account from services.
    and start the new report server. But the error occurs while starting the report server.
    the error message is
    error 1075 occured: The dependency service either does not exist or have been marked for deletion
    pls help
    Thanks in advance
    Regards
    Yogesh Kumar

    Hi,
    this is the Oracle Forms forum, you might have more luck in the Reports forum here Reports
    However, I guess you installed the reports server as a service under windows, right? Check the DependOnService registry key value under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<reports server key>
    Uninstall the reports server using rwserver -uninstall <server_name> and reinstall it using rwserver -install <server_name> [batch=yes/no] [autostart=yes/no] with valid parameters.
    HTH
    Gerald.

  • Payment Terms not saved using BAPI_PO_CHANGE

    Hi,
    We are using BAPI_PO_CHANGE to save changes to the PO.
    When I use a Payment Term with 'Day Limit' (i. e Day Limit not zero) the Payment term field in the PO header is blank after commit. This doesnt happen for other payment terms.
    Has anyone faced this issue?
    Any suggestions will be appreciated.
    Ramesh-

    Hi ramana ,
    How r u populating the two table s?
    POCOND
    POCONDX of the bapi , can i know the code
    here u have to populate all this
    COND_TYPE
    COND_VALUE
    CURRENCY
    COND_UNIT
    COND_P_UNT
    CHANGE_ID(I for insert a new condition ,U for Update , D for delete)
    pls checjk thios and Pls ask if u have any thing.

  • Release stategy issue

    Hi Gurus,
    I Develop the release stategy in sandbox, every thing fine in sandbox then transport to quality server.Then i cheak in quality its not working because in quality i forgot to create chart and class. Then i created char and class after that also its not working.its showing the error message ERROR IN CLASSIFICATION(PR_CLASS_FINAL class type 032) . its not allowing me to enter in classification inquality server but in sandbox its working fine.its very urgent
         pls help me .
    with regards,
    bhaskar.

    Hi Anand,
    where i have to give the values , u mean in classification. To maintain classification its not allowing me to enter into the screen where we maintain the values. shall i delete the release stategies in sandbox and create again in sandbox then i transport are without deleting, shall i transport in sequence.if i transport sequence without deleting it wont be a problem write. Mean first i create one class and transport to quality that time its not working then i changed another class in sandbox and trasport then also its not working.because in that table its not deleted.pls explain how u solve the problem when u get this problem.
    with regards,
    bhaskar

  • ITunes from my Ipad2 working not properly

    Hi,I need a help something wrong happen with my ITunes ,during to the download progress,after few seconds is report ; U can not download,error,it's free app.show time to movie 'HOMELAND' part 2 -Crossfire,rest of parts is done.Anybody help me,deleted.pls
    Marco

    You cannot delete iTune; it's a pre-installed app.
    Check your restrictions
    Settings>General>Restrictions>iTune

  • Idocs from R/3 should not go to XI

    Hi All,
    I have Idocs -shipment idocs, which are going from R/3 system to XI.
    Is there a way to prevent this to happen. Can some somebody help me on this.
    Kind Regards
    Chakradhar

    If its no more needed you can delete the distribution model view.
    1) go to BD64 Model view in edit mode
    2) select the Model View which has the message type you dont want to send data for
    3) Press "Delete"
    Pls let me know of it helps.
    Regards
    Shital

  • Dynamic Tabs in Form

    Hi,
    I have created a Form with a Tab containing few fields and two Buttons(AddTab, Delete Tab),
    1) My problem is when ever i click on 'Add Tab' button, a new tab should get added to the existing tabs with the same fields as main tab.
    2) When ever i click on 'Delete Tab' Button the current tab should get deleted.
    pls help me out

    That is what I am trying to do, but I am unsure of how to pass the appropriate string with the values of the foreign/primary key.
    I am using the following URL, but the form doesn't seem to be populating based on the primary key
    <!--
    edit
    -->
    Message was edited by:
    dsn0wman

  • Newly created Co. Code found under the old co.code

    Dear Mentors,
        Please help me in sortingout the below problem:
         Have cteated a Company code: 1001 (Bharath Clothing Co.) which is copied from Company Code: 2200 and later modified according to my requirement.
        When i have cross-checked the existence of Company code 1001
    with the help of T.Code: ec02, it is found in the company code 2200 under 'Credit control Area".  All assignments like sales area, distribution channel, division etc are finished but not able to create customer master using the sales area of this company code because of this error.  Please help me to sort-out this issue.
    Thanks/Regards,
    Sriram.

    Hi
    Plants and divisions can be deleted by chosing them and delete by going to delete check box the second one near new entries
    But a company code cannot be deleted by us..
    It is FI procedure
    Since you have created plants and divisions by copying the company code i doubt whether the same can be deleted
    Pls have a try
    Regards
    Raja
    Edited by: ramanathan raja on Aug 14, 2008 3:14 PM

  • Help in locking

    can any body help me...I want some locking process.when I entered with some order no(AUFNR)..at the same time no one can enter at the same AUFNR.For this I have taken one ztable and first when we entered then that AUFNR I saved in ztable and at last I delete that AUFNR in ztable. But when I enterd in our report then AUFNR save in ztable and when I close that report with close button 'right top corner '(not back or exit) or in bottom tab rt click and close then our ztable entry is not deleted. pls give me any solution.
    Thanks
    Rakesh.

    hi,
    If you are updating the entries on to your ztable and wants to lock the table while updating the entries create a lock object for that table Via SE11->Lock Objects and use that FM's before and after updating the table i,.e, ENQUEUE_EZ_<ZTABLE> before updating and DEQUEUE_EZ_<ZTABLE> after updating the table ...
    Regards,
    Santosh

  • Change task status in notification

    is it possible to change the task status like the notification status (in process again). A completed task -> in process again. I can't find this function and also it isn't possible to delete a completed task.
    Best Regards
    Bernd

    Hi,
          you can delete the tasks in database table which has  generated through action box item that means you can mark it as deleted. Take you notification number go to table qmsm and give that notification number and execute you will get the tasks select the task which you are going to delete and go to command bar type /H press enter and then press display then press F7 it will guide you to a line in code
    if code = 'SHOW'. double click on that and in field contents type CAPS EDIT and press change button and then press F8 it will guide you to next screen i.e. QMSM table in change mode. In this set X for field KZLOESCH and delete the indicator in KZACTIONBOX field and save it. Again go to that notification in change mode and see the task.it will get deleted.
    pls reward me with points if it is useful to you
    regards
    satish

Maybe you are looking for