Delete point (audio) pen tool not working

I have for long easily used the delete point pen tool to lower or raise the decibel levels in the Timeline.
Now, I can't. I don't understand what changed. I've tried to use it on films I've already used it on.
All that happens is that the entire track gets 'selected' (turns to dark purple).
I don't think I've changed any settings.
I have FCE 4.0.1 (not HD).
Flummoxed.

Trash the FCE Preferences.
This will assist with the job:
http://www.digitalrebellion.com/prefman/
Al

Similar Messages

Pen Tool Not Working In FinalCut 6 - OSX 10.6.8

Trashed preferences and still not working.
Forgive me if Im not posting this in the right place
but I just went round and round looking where to
post it.

Hey Ian - Yes - I also trashed the User Data Folder.
Hey Meg - I am trying to mark keyframes to adjust audio levels
and fade ins and outs on pic.
It doesn't work when I select it (nor does the pen delete etc.)
And doesn't work when I hit p.
All the other tools are working.
Thanks for your response.

Pen Tool not Working

I started a new project, and I'm coming up on a deadline. I'm trying to adjust the audio, but the pen tool won't work. I've never had this problem before. Am I doing something stupid? Thanks for your help.

I clicked on the pen tool, but it acts as a pointer. The pen tool box deepens, as it usually does. When I push P, on the key board, it still doesn't work. If I try to click on the audio, it highlights the clip. All the other tools work properly. I'm trying to adjust my audio levels. I went to trash preferences, but there is no FCX User Data folder. I know I have trashed preferences before, and it was there. I had to do an archive, and install, some time ago, if that's matters. Thanks.

Illustrator Cs2 Pen tool not working.. Help!!

So I downloaded Ai cs2 the other day. Whenever I come to drawing polygons with the pen tool I set the fill to a colour and the stroke to none(/) just so i can produce block colour shapes without an outline. However When ive come to do it on cs2 the pen tool only lets me draw thin black lines... What am I doing wrong??

THat's outline view.
If you turn on preview mode, you should see that shape.
But since it's not selected and the layer in the layer panel is closed, it's impossible to analyze this further.

Pen tool not working in cs2

Can you help? I cannot get my pen tool to make an active selection. It completes the path, but then when I try to inverse selection, it says no pixels were selected. I am new to this and very frustrated. It will let me select all, but the path area remains inactive. PLEASE HELP!!!!

> It completes the path, but then when I try to inverse selection, it says no pixels were selected
What Phos says is true, but since you say you are getting a selection I will assume you said pen but meant marquee tool or some other selection tool.
Usually you will get the no pixels selected message when you are on a layer that does not have any content. You can see content, but it is on a different layer. Change to the layer with the content in the layer palette, and then you should be able to inverse your selection.

Pen tool not working the same

I don't often use the Pen Tool as it is not needed but when I do, I do the same kind of thing and that is draw around something so that I can use a filter on the selected area.
I was able to create a shape within a shape so there is a hole and then apply my filter to it. However, when I try to do the same thing it is all weird!
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
Does anyone know what might be causing this and how I can rectify it. Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
Any hwlp would be hugely appreciated!
Nig

function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
I create a shape and then put a shape inside, right click and choose Make Selection and the inner shape disappears leaving the larger outer shape.
function(){return A.apply(null,[this].concat($A(arguments)))}
UltimateTop Trumps wrote:
Another weird thing is that when I use a filter it applys it outside of the selection, but this is not as annoying as the original issue.
This occurs when you use the quick mask to create a selection. Did you?
miss_marple

Why is my pen tool not working??

Instead of drawing shapes, my pen tool only creates a new shape layer every time I click..
What am I doing wrong??

Yes, but that didn't seem to be what you were asking.
If you have no layer selected, using the pen tool draws a new shape layer.
If you have a layer selected, using the pen tool draws a mask (unless the layer is a shape layer, in which case it draws a new shape within the selected shape layer).
Please, read the Help sections on shape layers and using the pen tools:
http://helpx.adobe.com/after-effects/using/creating-shapes-masks.html#create_a_bezier_shap e_or_mask_using_the_pen_tool

Pen tool not reconnecting after using convert point tool to reajust?

Hi
I was wondering if anyone had come across the problem pen tool not reconnecting afer using convert point tool to reajust? sorry if you don't understand what I mean, basically I can't reselect my pen tool to its path one doing another similar type task with another pen tool task.
thanks,
helen

http://forums.adobe.com/people/Larry%20G.%20Schneider
Larry,
I Just tried the solution you gave. It did not work. I still have 1 point vectors in a very small image. The image is a simple drawing of a map. I just want to size it to fit a smaller page size.
Elaine

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

Pen Pressure not working in Photoshop CS5.1

Hello,
I've looked at a lot of questions and answers concerning pen pressure in this forum, and I've tried a lot of things to fix this problem. I have a Genius MousePen 6x8 and use Photoshop CS5.1. It's been a while since I used my tablet, but it used to work before. I rebooted my computer a while ago, so I installed the new driver from the Genius website. The tablet is working fine, even the pen pressure, but for some reason it just won't work in Photoshop. I've tried to fix it by resetting the Photoshop settings by using the Ctrl+Shift+Alt, I've reset the brush tool, I've played around with the brush options and nothing has worked.
Here is the image of the pen pressure working:
And here is the image of the settings for the brush and the pen pressure not working:
Thank you for your time!

Your tablet driver isn't reporting pressure correctly.
The knockoff tablet drivers usually need to be revised for each new version of Photoshop (and we have no idea why).
Contact your tablet maker to see if they have updated drivers to fix their bugs.

Content aware move and extend tool not working in PSE12

Photoshop Elements 12 content aware move and extend tool not working with Yosemite upgrade.

Have you deleted the preferences and the saved application states?
A Reminder for Mac Folks upgrading to Yosemite | Barbara's Sort-of-Tech Blog

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

[Solved] Wacom pen buttons not working

Hi, this is probably simple to fix, but I don't understand everything well enough to get it set up. I have a Fujitsu T5010 with internal Wacom tablet. The Wacom drivers are installed. I can use the pen to move the pointer, and click. However, the buttons on the side of the pen do not work. Also, the eraser end of the pen seems to register as an ordinary single click, rather than a separate input.
Here are some relevant outputs:
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 stylus" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Option "TabletPCButton" "on"
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "325"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
and
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 eraser" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Property 'Wacom Hover Click' does not exist on device.
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "379"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
Also, I have no /etc/X11/xorg.conf, but I do have a /etc/X11/xorg.conf.d/50-wacom.conf, which looks like
$ cat /etc/X11/xorg.conf.d/50-wacom.conf
Section "InputClass"
Identifier "Wacom class"
MatchProduct "Wacom|WACOM|Hanwang|PTK-540WL"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class"
MatchProduct "Serial Wacom Tablet"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
# Waltop tablets
Section "InputClass"
Identifier "Waltop class"
MatchProduct "WALTOP"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
# N-Trig Duosense Electromagnetic Digitizer
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection
I am running 64-bit Arch, installed only a month ago (so completely systemd), and fully up to date as of last night.
Last edited by khelar (2012-12-13 19:03:54)

Never mind, I solved my own issue. In my /etc/X11/xorg.conf.d/50-wacom.conf, I modified the following section
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
to read
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
Option "Button1" "1"
Option "Button2" "2"
Option "Button3" "3"
EndSection

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.

Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess.

Delete point (audio) pen tool not working

Similar Messages

Maybe you are looking for