Delete posting runs with status '30'  from PCPO

Hi,
we were able to delete the posting runs from PPOIX and PPOPX table, but posting runs with status "30" are not stored in these tables . Can someone please help me find out the tables where the posting runs with status "30" are stored?
thanks for your help,
krishna.

Thank you.One more quick question, we are also not able to delete records with status '90'( Incorrect Documents).
I am thinking they would be stored somewhere. Can you help?
Edited by: Kannam Krishna Veni on Feb 18, 2010 11:30 PM

Similar Messages

  • MIGO:How to post GR with Location induced from PO (Project Stock)

    Hi experts,
    I want to post GR with Location induced from PO (Project Stock).
    But SAP doesn't allow this induction.
    Please show me how to resolve it.
    thanx.
    Torao

    Hi,
    In PS if the account assignment is "P", then the material is treated for directed consumption to the Project or WBSe.
    If you want to track the Project Stock based upon of Storage Location (Here, the Storage Location is used as Project Stock location) then, please select Account Category as "Q".
    Create a PO using Account assignment Category Q will give you Tracking of Quantity based upon Project WBS and Storage Location. At the time of GR the Stock will be shown under Project WBS. (Physically maintained at Storage Location used)
    e. g. :  Create PO using Acct Assignment Q , give WBS and save.
    MIGO : GR will be done 101 Q (Project Stock)
    Quantities are shown : Mat # 100XXXXX  Qty : 100 Storage Location : XXX  Project Stock : 100 ( WBS )
    Special Stock : Q
    GI : 221 Q using the Project Stock for Consumption.
    The Project Stock can be tracked using T-Code MBBS.
    Hope it helps,
    Best regards
    Amit Bakshi

  • Delete Visit plan with status released ?

    Hi.
    How can i Delete Visit plan with status released ?
    I use function crm_tour_delete_single, but " You cannot delete visit plans with status 'Released' "
    Thanks.

    1020427 Visit Plans:Message handling and deletion of visit plans .
    see if you can find it here.

  • GPP Delete policy not working on Windows Server 2008 R2 RDS when deleting shared printers with status access denied.

    Hi!
    I Have one AD Security group for each shared printer, I have one GPP that map the printer if the user is in the security group that belong to the printer. And one GPP to delete the printer if the user is NOT member of the security group. The security group
    is also applied in “Security” tab on the printsrv with PRINT rights  and “everyone” is removed. This works 100 % on Windows 7 clients and Windows 2003 Terminal Servers. But on Windows 2008 R2 RDS this dont work.The Delete Policy will not delete the shared
    printer. No warning in any logs, and the gpresult shows that the gpo setting applyed sucessfully. The only way I can make the Delete policy work is if i give the user print rights on the printer on the printsrv. Looks like for the policy to work on 2008
    R2 the user must have print rights on the printer object on the printserver. The GPP Delete Policy will not delete printers that have status : access denied. Anyone else had this problem?

    Hi,
    Based on your description, it seems that we need to give users appropriate permissions, for the error
    Access is denied is more or less related to permissions.
    However, we can avoid deploying the GPP printer delete policy. As far as I know, we can use Item-Lvel Targeting of GPP to push the shared printers
    to the targeted users or groups.
    Regarding ILT, the following articles can be referred to for more information.
    Preference Item-Level Targeting
    http://technet.microsoft.com/en-us/library/cc733022.aspx
    Security Group Targeting
    http://technet.microsoft.com/en-us/library/cc772471.aspx
    Best regards,
    Frank Shen

  • FIM 2010 Sync not running with status "Stopped-extension-dll-exception"

    we are getting the following error for all our extensions when trying to run the Sync Operations. All extensions have similar errors with event ID 6159 generated in the application event log. They all started occurring after I deleted a attribute flow
    rule in one of the agents. This is happening in Production and are facing lot of other issues because of this.
    The management agent "Peoplesoft" failed on run profile "Full Import Full Synch" because of a problem with the initialize method on the extension object. The extension dll is "PeoplesoftExtension.dll" and the stack trace is:
    Microsoft.MetadirectoryServices.UnexpectedDataException: String or binary data would be truncated.
    The statement has been terminated.
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.RunSQLCommand(String commandstring)
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.AddSentEmailsRecord(String sAMAccountName, String MessageSubject, String MessageBody, Int16 DelayDays)
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.CheckDoNotDisableInactiveGroup()
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.LoadConfigSettings()
       at Mms_ManagementAgent_PeoplesoftExtension.ExtFunctions.InitializeCommon()
       at Mms_ManagementAgent_PeoplesoftExtension.MAExtensionObject.Initialize()
    Please advise on how to fix this as I have no clue where to start and am new to FIM.
    Only Full Import(Staging ONLY) is successful.

    The error message you are getting is talking about data getting truncated. Any change that you had a data change alongside your other changes and now the length of data in one or more of your attributes is longer than it was?
    I suspect that since you are new to FIM, something else has changed that you don't realize (beyond just the deletion of the one sync rule), but...
    If truly the only thing that changed was a deletion of a flow rule, is there any chance that either of the following could have happened:
    With the deletion of a flow rule the corresponding data is no longer going through the sync engine. Could there be some logic that due to precedence, is now using a different value, and this different value is too long for some other piece of logic.
    With the deletion of a flow rule the corresponding data is no longer going through the sync engine. With this value missing, some extension logic is making a different choice and generating invalid data. Without the deleted data flow, there may be a null
    value that extension logic is not properly dealing with.
    As was suggested, the best thing to do may be to restore from backup and get the system back to a known state.
    If you have development skills and if you have the source code to your custom rules extensions, it is fairly easy to debug and single step through the code. This of course must be done with extreme caution if you are in a production environment. You will
    also need familiarity with how the FIM Synchronization engine works. Documentation is here:
    http://msdn.microsoft.com/en-us/library/windows/desktop/ms698774

  • Program not running with -cp option from command line

    I'm trying to run a very basic emailing program in Linux (Fedora 5) using Sun's j2sdk1.4.2_16.
    I can run the program no problem from the command line using
    "java RunEmailer"
    but if I try both:
    "java -cp /usr/lmt-programs/mail_send/RunEmailer"
    or
    "[JAVA_HOME]/java -cp /usr/lmt-programs/mail_send/RunEmailer"
    I keep getting the help print out about options when running java.
    I need the -cp option to work as I need to run this program from crontab.
    Thanks in advance.

    uberalles wrote:
    "java -cp /usr/lmt-programs/mail_send/RunEmailer"Here you specify the classpath (the directory /usr/lmt-programs/mail_send/RunEmailer) but you don't specify the class that is to be run. If the class you want to run is named RunEmailer and it's in the directory /user/lmt-programs/mail_send then you want this command:
    "java -cp /usr/lmt-programs/mail_send RunEmailer"

  • Idoc are posting to ECC with Status 64

    Hi All,
    We are receiving IDOC with status 64 from PI.
    We used tried by changing the options in partner profiles
    --> Trigger by Background program
    The inbound IDoc is processed in the background. In this case, make sure, that the report RBDAPP01 is scheduled in the transaction SM37 as a regular job with the correct variant to process all IDoc´s, which have this processing option maintained.
    --> Trigger immediately
    When using this setting, it is important to have sufficient resources for the immediate processing of the inbound IDoc´s. One dialog work process must be available for every single IDoc.
    If this dialog work process is not available, the IDoc cannot be processed and stays in status 64.
    I reffered the notes
    555229 ‘IDocs hang in status 64 for tRFC with immediate processing’
    734576   ‘IDocs retain status 64, but should be processed immediately’
    1055679 ‘IDoc-tRFC inbound with immediate processing may not work’
    Still the idocs are in 64 status, every time im re-processing them manually. even after re-processing some of them are going to 51 or 54.
    Please help me.
    Regards
    Bhargava Krishna

    Hello,
    Can you please explain your issue is with "Trigger by Background program" or "Trigger immediately"?
    For Trigger immediately, if there is no free dialog work process available than IDocs are posted with status 64.
    For Trigger by Background program, Background job RBDAPP01 will process IDocs depending on variant you define to select & process IDocs(i.e., IDoc Status = 64).
    It is always recommended to use "Trigger by Background program" for high volume interface which has large number of IDocs.
    Help on RBDAPP01
    Regards,
    Sameer

  • Delete batches with zero stock from dropdown list

    Hi All,
    I have a requirement on batch stock materials.The exist program displaying multiple batches for material plant with stock and without stock in the drop down list for MCH1 table in the pop up window.
    Now i would need to delete the batches with zero stock from drop down list.I could find the data for stock and non stock from MCHB table .
    Any idea how to delete the entry of non stock batches from drop down list
    Regards,
    Reddy

    Hi All,
    The logic has already been implemented to for drop down list for all batches(with or without stock) for material plant.the follwing code has been written for the same.
    Any idea how to delete the entry for non stck baches from the drop down list.
    this is the code
      SET PARAMETER ID 'MAT' FIELD help_lips-matnr.
       SET PARAMETER ID 'WRK' FIELD help_lips-werks.
      Export parameters to memory to enable search help via classes
       CLEAR dseltab.
       REFRESH dseltab.
       dseltab-fldname = 'MANDT'.
       MOVE sy-mandt TO dseltab-fldinh.
       APPEND dseltab.
       dseltab-fldname = 'MATNR'.
       MOVE help_lips-matnr TO dseltab-fldinh.
       APPEND dseltab.
       dseltab-fldname = 'WERKS'.
       MOVE help_lips-werks TO dseltab-fldinh.
       APPEND dseltab.
       dseltab-fldname = 'CHARG'.
       MOVE help_lips-charg TO dseltab-fldinh.
       APPEND dseltab.
       EXPORT dseltab TO MEMORY ID 'DSELTAB'.
      Get description for search help
       mc_object = 'MCH1'.
       lf_shlpname = mc_object.
       CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
         EXPORTING
           shlpname = lf_shlpname
           shlptype = 'SH'
         IMPORTING
           shlp     = lx_shlp
         EXCEPTIONS
           OTHERS   = 1.
      Enable value copy from search help to dynpro field
       READ TABLE lx_shlp-interface INTO ls_interface
                                    WITH KEY shlpfield = 'CHARG'.
       ls_interface-valfield = 'X'.
       MODIFY lx_shlp-interface FROM ls_interface INDEX sy-tabix.
      Start search help dialog
       CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
         EXPORTING
           shlp          = lx_shlp
         TABLES
           return_values = lt_retvalues
         EXCEPTIONS
           OTHERS        = 1.
       IF sy-subrc EQ 0.
         READ TABLE lt_retvalues INTO ls_retvalue
                                 WITH KEY fieldname = 'CHARG'.
         IF sy-subrc EQ 0.
           lips-charg = ls_retvalue-fieldval.
           gs_lips-charg = ls_retvalue-fieldval.
         ENDIF.
       ENDIF.
    Regards
    Reddy

  • Mark as deteled idoc with status 40

    Hello,
    I have to mark as deleted an idoc with status 40.  If  idoc has other status (for example 51), I can do it from transaction BD87. But is not possible with status 40.
    For your information, we're using realease 4.6 .
    Thanks,
    Sené

    Hi,
    Yes, we can't reprocess the IDOC with status 40. I have to mark as deleted this idoc. And with other idocs we are using BD87 to mark as deleted.
    How can i mark as deleted this idoc?
    Thanks,
    Sené

  • Posting period on status "period closing" allows enter goods receipt

    Hi to all:
    My customer is having the problem that the posting periods that is on status "period closing" allows users to save goods receipt and goods issue that DON'T have the authorizations under:
    1) General / Period status: Unlocked Except Sales
    2) General / Period status: Closing Period
    But any other kind of marketing document, journal entry, shows the error correctly:
    "user is not authorized for data entry in posting periods with status 'Closing Period'. Contact your Administrator"
    According to the Help of SBO, the period status authorizations are:
    "Unlocked Except Sales u2013 all types of transactions and documents, except for the documents under the Sales u2013 A/R module."
    "Period Closing u2013 users who have period closing authorization can post all types of transactions and documents."
    We are using Period Closing option for example in May, but even i dont have the authorizations for these options, and i can enter goods receipt and goods issue without problems, is this normal? and Why?
    I only think it could be that goods issue and goods receipt is seen like a stock fix transaction but im not shure about this.
    I have tested this in PL42 and PL46, thanks a lot for your help.

    Hi Carlos,
    The issue mentioned seems to be related to Note No.  :  [1274415|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1274415].
    You can check whether it is same or not.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Posting Key Field Status changes - unable to generate Transport request

    Dear All,
    I did posting key field status change from suppress to optional ( P.Key 24).
    However I am unable to generate a transport request.
    Please share your inputs
    Thanks
    Sanjai 

    Hiii sanjai Babu... your client would have set automatic recording of changes in scc4... or the request would be created and yo woulnt have left the page after saving soo it might have been saved... hope it helps...
    Regards
    Abhay

  • How do I process messages with status = "Holding"

    Hi,
    How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
    I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
    I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
    Please help.
    Thanks
    Sudheer

    Hi,
      "Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose  message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
    I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
    You will not find bcoz of AE archiving settings.
    Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
    Regards,
    Rao.Mallikarjuna

  • How to delete the messages from sxmb_moni with status cancelled

    Hi ,
    how to delete the messages from sxmb_moni with status cancelled
    Is there any report for this
    Regards
    Suman

    I think just for deleting the jobs you can do this only
    Scheduling Delete Jobs
    To schedule delete jobs, proceed as follows:
           1.      In the Integration Engine -
    > Administration menu, choose Schedule Delete Jobs.
           2.      Select the job(s) to be scheduled.
           3.      Specify the start time and date.
           4.      Specify the period you want to use and choose Schedule.
    For an overview of all jobs, choose Jobs.

  • When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

    When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes.  It also cancels/deletes that run/workout.  This has happened several times.  How can I keep this from happening?

    If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
    Take it to a servicing dealer and wait for it.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Document from last posting run in 2007 are not yet updated

    Hi Guru's,
    When I run the AJRW fiscal year change 2009, it was not successful because a system message says" fiscal year change in company code XXX, possible only after year end closing 2007.
    So I execute AJAB-Year End closing in 2007, in Tab " Closed Carried Out - it say "NO", when i double click  it says: "Document from last posting run in 2007 are not yet updated"
    So i check it in SM35 to see when did this error started, i found out it started at around mid 2007, July, status is In background instead of Processed. Out of 15 thousand transaction, 14 of which got an error.
    Please help how we are able to post asset accounting for 2009.
    Thanks
    Mila
    Edited by: Mila Calonge on May 4, 2009 10:02 AM

    check the error log why the transactions are not processed. Recreate the session with transaction code AFBD giving the year and fiscal period and check the error log. It will give the clue why the transactions are not processed.
    Those might not have processed due to GL account assignment or cost center master data issues.

Maybe you are looking for