Delete Rental Object in RE-FX

Hi,
I want to delete a Rental Object in RE-FX. It gives me a error " It is not possible to delete the data: Account assignment was already made to the object ".
I have checked in the BSEG table and found that no FI documents were posted for this Rental Object. There are no Occupancy / Other contracts for the Rental Object. No assignment is made to Functional Location / Asset / Participation group / Rental Space.
How to delete the Rental Object ?
Thanks
Siva

Hi,
Have you done this ?
VVR

Similar Messages

Mass Deletion of Rental Objects

Hi,
I have to delete all Rental Objects approx. 100+. Is there any way I can perform that quickly?
Thanks
Atif

Hi,
You can see two text boxes in the left pane of RE80 Transcation, In the first box enter "My Objects" Second text box enter "User ID of the Creator". Then system shows list of all rental objects, from which you can select and delete as explained above. These two boxes are visible only if you are using latest GUI.
Note: In the customization of RE-FX. SPRO-> Tools->Archiving->Deletion of Real estate objects without Archiving check box should be flagged to delete objects.
Thanks,
B.

Log for Addition/Deletion of object in a Transport Request

Dear Friends,
Recently I had a issue where I tried deleting an object from a transport request and I got the message that object is deleted successfully.
But when the transport was imported then it failed with Sy-subrc 8 because of the same object in transport. The reason for the same could be :
1.) Either the object was not deleted from the transport request.
2.) Or Some one else added the same object again in the request.
I want to read the log of this transport in such a way that I see when a object has been added/deleted from a transport request along with SAP User ID of the person doing it.
Is this possible ? If so kindly share the steps with me.
Thanks a Lot for your kind help!!! This is very important for me....
Regards,
Lalit

Hello Lalit
I hope nothing of that sort is available as the transport requests will again have tasks under them.
The changes done to the task will have to be tracked in that case but SAP doesn't have that task change logging as far as I know.
All E0* tables relates to transports and objects under these transports none of them have logs on this nor even any transactions which allow user to edit the transport object.
You get an action log which provides who created it and who releaed them.
But if you configure CharM on Solution manager I hope you can track each changes.
Regards
Vivek

Error in FM DDIF_NAMETAB_GET when deleting BI objects via transport request

Dear all,
when importing a transport request in which several types of BI objects are deleted (Infocubes, DSO's, transformations, routines, DTP's, query elements, infosets, process chains). The import terminates only when transporting from acceptance to production with return code 12 due to an uncaught exception:
Transporting from development to acceptance did not raise this exception.
The ST22 dump (see below) refers in the "contents of system fields" section to a DSO, and to post-import activities. The DSO and the associated tables could not be found (rsa1 & se16), since they are deleted as desired.
Some of the relevant notes that I have found do refer to DSO related problems, but they all indicate to install SP19 which we already have installed (BW 7.0 Patch Level 23)
Could you please assist in pointing out potential solutions based on the information from the ST22 Runtime Error below?
Kind regards,
PJ
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RS_PROGRAM_ERROR
Date and Time          08.02.2011 10:48:14
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RS_PROGRAM_ERROR' was raised, but it was not caught anywhere
    along the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
    'CL_RSDD_DS====================CP' has to be
    terminated.
Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RS_PROGRAM_ERROR', was not caught
    and therefore caused a runtime error.
    The reason for the exception is:
    Error in BW: Error in DDIF_NAMETAB_GET
How to correct the error
    If the error occurs in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RS_PROGRAM_ERROR"
    "CL_RSDD_DS====================CP" or "CL_RSDD_DS====================CM001"
    "APPEND_DS_TEC_FIELDS"
System environment
    SAP-Release 700
    Application server... "dp1ci"
    Network address...... "<removed>"
    Operating system..... "HP-UX"
    Release.............. "B.11.23";
    Hardware type........ "ia64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 45
    Shortdump setting.... "full"
    Database server... "spisap02"
    Database type..... "ORACLE"
    Database name..... "DP1"
    Database user ID.. "SAPBIW"
    Terminal................. " "
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Dec 14 2009 20:47:35"
    create on........ "HP-UX B.11.23 U ia64"
    Database version. "OCI_102 (10.2.0.1.0) "
    Patch level. 236
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 700
    Operating system..... "HP-UX B.11";
    Memory consumption
    Roll.... 5979936
    EM...... 0
    Heap.... 1459888
    Page.... 40960
    MM Used. 6988880
    MM Free. 415648
User and Transaction
    Client.............. 000
    User................ "DDIC"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "4D5111661004210BE10000000AFA2502"
    Program............. "CL_RSDD_DS====================CP"
    Screen.............. "SAPMSSY0 1000"
    Screen line......... 6
Information on where terminated
    Termination occurred in the ABAP program "CL_RSDD_DS====================CP" -
     in "APPEND_DS_TEC_FIELDS".
    The main program was "RDDEXECU ".
    In the source code you have the termination point in line 61
    of the (Include) program "CL_RSDD_DS====================CM001".
    The program "CL_RSDD_DS====================CP" was started as a background job.
    Job Name....... "RDDEXECL"
    Job Initiator.. "DDIC"
    Job Number..... 10475900
Source Code Extract
Line SourceCde
   31         RAISE EXCEPTION TYPE cx_rs_program_error
   32           EXPORTING
   33             text = 'Invalid DSO subtype'.                   "#EC NOTEXT
   34     ENDCASE.
   35
   36 *   get table name from DDIC
   37     CALL METHOD cl_rsd_odso=>get_tablnm
   38       EXPORTING
   39         i_odsobject = n_infoprov
   40         i_tabt      = l_tab
   41       IMPORTING
   42         e_tablnm    = l_tablnm
   43       EXCEPTIONS
   44         OTHERS      = 1.
   45
   46     IF sy-subrc <> 0.
   47       RAISE EXCEPTION TYPE cx_rs_program_error
   48         EXPORTING
   49           text = 'Error in CL_RSD_ODSO=>get_Tablnm'.        "#EC NOTEXT
   50     ENDIF.
   51
   52     CALL FUNCTION 'DDIF_NAMETAB_GET'
   53       EXPORTING
   54         tabname   = l_tablnm
   55       TABLES
   56         dfies_tab = l_t_comp
   57       EXCEPTIONS
   58         not_found = 1
   59         OTHERS    = 2.
   60     IF sy-subrc <> 0.
>>>>>       RAISE EXCEPTION TYPE cx_rs_program_error
   62         EXPORTING
   63           text = 'Error in DDIF_NAMETAB_GET'.        "#EC NOTEXT
   64     ENDIF.
   65
   66
   67   ELSE.
   68 *   model table only needed for standard datastore objects, for
   69 *   write optimized DSOs target table is a changelog that is fully described by
   70 *   dta_pro (infoobjects)
   71     CHECK n_s_dta-odsotype = rsdod_c_type-standard.
   72
   73 *   get model table fields to add
   74     CALL METHOD cl_rsd_odso=>get_mod_tab
   75       IMPORTING
   76         e_mod_fld_ur = l_t_comp.
   77   ENDIF.
   78
   79 * according to T.B. ( 13.04.2007) the correct position is
   80 * not needed in the D version
Contents of system fields
Name     Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Post-Import Methods and XPRAs for Transport Request
SY-MSGTY E
SY-MSGID DA
SY-MSGNO 300
SY-MSGV1 /BIC/AV_AMOFCB40
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20110208
SY-UZEIT 104759
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET

Hi All
We are also experiencing this same error when transporting deletions of multiple objects.
Although the transport was cancelled in the destination system (production) it appears to have largely deleted all objects successfully except for DSOs.
The DSOs still appear in the table RSDODSO (via SE11) but are not visible anywhere else. When you try to view the DSO via RSDODS a warning appears saying "DataStore object to be deleted by transport -> delete only allowed". If you try to delete them in this transaction the same ABAP runtime error as the transport appears.
Any assistance would be greatly appreciated!
Regards
David

How to delete all objects in a package?

Hello,
I've seen a similar question here. But is there a tool or a smart way to delete all objects in a dev class or a transport request?
Best Regards
Volker

These are really 3 questions??
1. To delete objects in a request there are a number of ways, here is one:
Position cursor on modifiable request.
Double click on request and choose 'Objects' tab
Choose object line you want to delete and click 'Delete'
Save your changes.
2. To delete objects in a Dev Class:
Go to work bench --> edit object, Class and give your class name, you will see delete option at the bottom of the screen.
3. How to delete all objects in a package:
here is a link with the steps you need for this: http://benxbrain.com/en/index.do?onInputProcessing(brai_object_thread)&001_threadid=0000161442&sysid=WP5&pgmid=R3TR&object=DOMA&obj_name=DEVCLASS&child_param=

Assign meter that already created from PM to rental object

Dear Expert,
Please kindly advice on how to assign the meter that already created (already has the measuring point ) into pooled space or rental object.
When I use REBDRO --> Meter Tab
the transaction allows only creation of new measuring point , Field Measuring Point is disable and allow to assign internally from the system
Best regards,
Tima

Hi Tima,
I dont think it is possible to assign the measuring point already created to RE Objects. As, if we go to transaction IK01 we select the Measuring point object as "IME" and then select the object type and ID. If we use any other measuring point object we dont have the option to enter the Rental object type and rental object ID to create the measuring point. So any measuring point created with any other Measuring point object cant be attached to the rental objects.
Even if we directly create measuring point from rental object, the object is created with "IME" Measuring point object.
Regards,
Deepak M

Deletion of Object Dependency in BOM

Hi All,
I am trying to delete the Object dependency from a BOM using the Function Module "CUKD_API_ALLOCATIONS_MAINTAIN". After executing it, the Object is getting deleted but the Bulb like symbol for Obj(Object Dependency) in Transaction CEWB is not disabling. Please help me in this.
Thanks
Vinay

Solved

How to Create a Cost object for a Rental object in RE-FX

Dear Friends,
We have created one Building and it has been assigned with an Asset Master.When depreciation is posted it is debiting to the Cost Center attached to the asset master.
Here the requirement is to allocate the Cost from the Cost Center to the Rental objects Created under the Building based on the Floor area of the rental Contracts/Rental objects.
Can you please suggest how to resolve the issue & how to distribute the Cost from Cost Center to Rental objects.
Thanks and Regards
Gyanendra
+919963062333

hi.........
When you to create rental unit all the relevant details as rent, floor area etc are mentioned in master itself in different tabs check whether it is being maintained or not. Further on right hand side on the top there is one button for co settlement rule click on it and maintain settlement rule give sender as rental unit & receiver as cost centres you want. Thereafter execute the settlement. Apportionment will be done as required.
Hope this will solve your problem.
Regards
Manish Jain
Pls assign points if your problem get solved.

Deletion of Objects in ABAP Workbench

Hi,
I want do delete an self defined interface in the ABAP Workbench. But for some reason it is not possible to delete this interface, although its not used anywhere. I got the message
Object cannot be edited with Class Builder
Message no. OO612
But where else should I delete the interface if not in the class builder or in the workbench?
Any ideas how to solve this problem?

Good day,
I also ran into this issue when trying to deploy some wd objects with SAPlink.
I managed to delete the objects by using the "OO_INTERFACE_DELETE" function module. There is also a function module called "OO_CLASS_DELETE" to delete classes.
In either case you just populate the parameters in the following way:
INTERFACE (or CLASS) = <your class\interface name>
COMMIT = 'X'
FORCE = 'X'
Hope this helps.
Regards,
Shaun

How to create a deletion transport request without deleting the object.

Hi Experts,
I got a very strange requirement in which i want to delete a object from QA envirement. One way to delete it is delete the object in developement and save it in a transport request. And transport that request to QA.
But can't delete the object from Dev environment. So is there any other way by which i can do this.
Thanks
Yogesh Gupta

Hi,
You need not worry about deleting the objects in QA now.
Have the set of objects which you will not be tranporting to PROD.
After your project is live and during support before handholding to the customer, clean your system DEV,QUA.
Reward Points if Useful.
Thanks,
Anita

How to delete an object from a change master?

I have a situation where a PDM has copied a route (task list) that was tied to a change master and brought it over by mistake, the route was also copied to the wrong group number and counter. What I want to do is have the route deleted and recreated with it's own group number and counter 1, however because it is linked to a change master it keeps pulling in that same group number. Any idea how to correct this or remove the material from the change master, we've tried to delete the object but get the message that not all objects were deleted and it is still there.
Thanks in advance.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

How to delete an object from a request?

friends,
      There is an exit developed to include a subscreen in a standard screen. The layout, flow logic and some include files are saved in different requests..i saved everything in one request and tried to release it...but it's not getting released.."Repair so, how to delete the object(s) from all the old requests where it is saved? when i attempt to delete the request, it is not allowing saying that changes can't be made to a released request. any other options available? how to go about with this? thanks all.

HI sathish,
1. If the old request is release,
   then we cannot do anything.
(There is no point in changing that old request)
(bcos its already released)
2. what can be done is that
   u save once again the objects,
   and it will once again ask for new request.
3. this time save it in new request
regards,
amit m.

Deletion of object list if header notification is of type M2

Hi,
I have a requirement where I need to delete the object list in a WO in IW32 only if the type of the header notification is M2. I have used BAPI_ALM_ORDER_MAINTAIN to do it, but this is not working. Is there any way I can remove the object list from the work order?

Hi,
I have a requirement where I need to delete the object list in a WO in IW32 only if the type of the header notification is M2. I have used BAPI_ALM_ORDER_MAINTAIN to do it, but this is not working. Is there any way I can remove the object list from the work order?

Project Online - Can't Delete Resource and User from Delete Enterprise Objects

I would like to link a resource account to a user account but I ran into an error: "The resource account
is already in use.". This is a known issue which I attempted to resolve by following the instructions in KB2881398.
However when deleting the selected resource from Delete Enterprise Objects I get a message indicating success ("The
selected Resources and Users have been deleted.") but the duplicate user is still in the listing in Delete Enterprise Objects and when attempting to link the remaining resource to a user logon account I still get the error
"The resource account is already in use."
Why is the user not deleted even though Delete Enterprise Objects reports success and how can I delete these duplicates to be able to successfully link the account?

Hi,
This might be due to your Exchange Sync issue, where your project workspace is unable to delete that user from local DB. Try following steps to diagnose the problem:
1) Go to your Resource Pool, DELETE a resource.
2) While resource is being Deleted, open another window
Server Settings -> Manage Queue Jobs
3) Here you can view the progress of your current Resource Deletion update, check if all goes smooth and your Resource is deleted successfully by showing process completion 100% :
( to view any error look at the
last column of table on Manage Queue Job page)
4) Cross check your Resource by running Resource Availability Report.
Basically this will give you a fair idea of your resource deletion problems and how system is responding to it.
Regards

Report to delete OM objects

hello seniors
can anyone help me with report to delete OM objects?

*& Report Z_HRP1000_DELETE
REPORT Z_HRP1000_DELETE.
type-pools truxs.
DATA : it_raw   TYPE truxs_t_text_data, "VARIABLES DECLARATION
       c_space(1)   TYPE c VALUE ' '.
data : begin of it_1000 occurs 0,
       objid like hrp1000-objid,
       end of it_1000,
       wa_1000 like line of it_1000.
data : it_fail like it_1000 occurs 0 with header line.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_file LIKE rlgrap-filename OBLIGATORY.
parameters : p_otype like hrp1000-otype.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file USING p_file. "CALLING F4 HELP FOR D=FILES
START-OF-SELECTION.
   PERFORM get_data.       "UPLAODING DATA FROM EXCEL
if it_1000[] is not initial.
loop at it_1000 into wa_1000.
    delete from hrp1000 where otype = p_otype
                          and objid = wa_1000-objid.
    if sy-subrc <> 0.
      it_fail-objid = wa_1000-objid.
      append it_fail.
      clear it_fail.
    endif.
    clear wa_1000.
endloop.
endif.
if it_fail[] is not initial.
loop at it_fail.
   write : it_fail-objid.
   clear it_fail.
endloop.
endif.
*&      Form GET_FILE
      text
     -->P_P_FILE text
form GET_FILE using    p_p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    CHANGING
        file_name = p_p_file
    EXCEPTIONS
        mask_too_long = 1
    OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform.                    " GET_FILE
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
form GET_DATA .
*If no file upload path is mentioned
IF p_file = c_space.
   MESSAGE
    LEAVE LIST-PROCESSING.
ENDIF.
*Function module for uploading the file
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
    EXPORTING
    I_FIELD_SEPERATOR          =
      i_line_header              = 'X'
      i_tab_raw_data             = it_raw
      i_filename                 = p_file
    TABLES
      i_tab_converted_data       = it_1000
   EXCEPTIONS
     conversion_failed          = 1
     OTHERS                     = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    LEAVE LIST-PROCESSING.
ENDIF.
endform.                    " GET_DATA

Delete Rental Object in RE-FX

Similar Messages

Maybe you are looking for