Delete request in ODS??

Hi all,
Can someone tell if I need to delete previous request in ODS every time when I reload data from IS to ODS and why??
I know that I need to do for Cube to aovid 'double load' but I am not sure about ODS. Can someone answer it? Thanks.
J.

Hello John,
That depends upon the update type you have selected in update rule of ODS. If updatre type for key figures is set to "overwrite", no need to delete previous data. But if the update type is "addition", then you need to delete data.
Since thers is no option of "Addition" update type in Cube, old data is to deleted there every time same data is loaded through full update.
Hope it helps.
Regards,
Praveen

Similar Messages

Unable to delete request from ODS - BW 3.5

Hi experts,
I am not able to delete request from ODS in BW 3.5, patch level 21. I put the request red, but it does not help to delete it. The request is full load and quite hudge (16GB). Deleting actually takes too long (several hours), but does not finish, so I cannot tell you any error description. It seems that this job can run forever... I was trying to activate the request before, but because of a tablespace limitations I received some short dumps. That is why I am trying to load it agin in smaller parts. It is strange thou that in Manage/requests tab the request has flag 'available for reporting' but the data cannot be viewed as active (only as new data). Any ideas, OSS notes?
Thank you,
Michal

Hi,
If you want to delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
You can check OSS Notes 947481
Regards.

Unable to delete requests from ODS

Hi Experts,
I am trying to delete requests fwhich is having some added records rom an ODS. I changed the status of QM to RED and in the monitor screen as well. Now, when I try to select the request and delete, a trash can appears and after hitting the refresh button the reportinng availability appears against the request.
I deleted the entries in the change log table...then I was able to delete the request from the ODS. Now when I try to reconstruct those deleted requests from the Reconstruct tab by changing the QM status in the monitor to green, the status of these request are in Yellow and there are updated records but the added records are 0. When I try to change the QM status it give s message "Request is already (partially) activated, no further QM action is possible.
How do I change the request QM status to Green and the get all the added records as there were in previous instead of 0's with out reloading the ods from r/3.
Thanks in advance,
HT

Hello,
This error may be RSMPC141 error.
Please see Note 643880 and Note 849857
this may occur becos of loss f records in change log.
You will need to reload to fix this problem
regards,
karthik

Problem in deleting request from ODS

Hi,
I did an init load from newly created update rule for my existing ODS. I cancelled the INIT load as it was taking a long time and tried to delete the request from ODS, but when i deleted the request it is not getting deleted. Under request/DTP it is showing 'Request without Monitor Log: APO Request or Terminated Request Generation'. Can you please tell me how to delete this request.
Regards,
Raghavendra.

Hi,
The load is from One ODS to another. The problem is i deleted the init, but there is a request in ODS as in mentioned above which i am not able to delete. Help needed.
Regards,
Raghavendra.

Delete request in ODS, not in reconstruction tab

Hi experts,
Sometimes when i delete a request in ODS, it can be found in reconstruction tab. Sometimes you cant.
In which scenario it can be found and in which it cant. In case you need that deleted request to reconstruct and you cant find it in reconstruct tab, what you do.

Hi,
Whenever u delete a request from ODS,it might be seen in "Reconstruction" tab only when it still exists in PSA.Once the request gets deleted from PSA,then it wont be seen in
"Reconstruction" tab.
Hope it helps u
Thanks & Regards,
Madhu

Delete request in ODS or Change request status

Hi Experts!.
I have been trying to delete a request from ODS, and this have been Impossible.
Originally Data was in ODS and in Cube. I deleted the data from the cube without problems.
To delete the request from the ODS I turned the check status to red.
If I try to delete the request from the ODS, at first, the request is flagged with a 'Trashbin' indicator, and when click 'Refresh' again, the 'Trashbin' indicator changes back to the 'Report is available' icon.
I have already checked:
- Data from this requests are not in any datatarget.
- There are not any process locking the ODS.
- I checked T.code SM37 josb BI_DEL* after deletion and the message was there was no records for that request.
I decided to delete the data selectively and leave the request as already is, but I can't get the request to green again. I have no message errors but it doesnt change.
I entered to the monitor for the request and turned the status to green again, but outside is still in red.
Can anybody helpme?
Even deleting the request o turning it to green again will be a solution.
Thanks a lot!.
Ana M.

Hi Ana,
I think that you're able to change the total status, but not the status in the administration requests of ODS, because the system feels that the active table and the change log table are not aligned. This is a way to prevent to update records from ODS to other data target.
So you have to realigned active table and change log.
Try to delete the request in the change log related to the activation of the records you've uploaded. You can delete that request in PSA administration, the name of the request is ODSR*.
For example: your request is REQU_1000. In the tab "reconstruction" of the requests management of ODS you also find the name of the activation request for example ODSR_2000. You'll find that request even if you don't use PSA during the upload!
Once you set the correct selections for PSA tree (settings --> display selections for PSA tree), search in the PSA administration the request ODSR_2000 and delete it.
Hope this helps
matteo

Deleting Requests from ODS

I have a request REQU_42Y54WN5641WI37ZC04U19PS9 in ODS.
How to delete this request? how can I find that.
Thanks
SP

Hi
Go to Adminworkbench (RSA1)-> Infoproviders-> Right click on your ODS and click Manage. In the requests tab, you will find all the requests loaded into ODS with their request IDs. Find the request with request ID as REQU_42Y54WN5641WI37ZC04U19PS9 and delete it. But note that the requests which are activated after this particular request will also be deleted.Anyway when you delete this request, you will receive a message stating that the latest requests loaded after this particular request will also be deleted.
Hope this helps...let me know
Regards,
R.Ravi

Delete request in ODS and Cube from process chain

Hi Experts,
I have the next situation: I have a process that each month need to extract data with a selection criteria of fiscalperiod and fiscalyear, only I can maintain a data request with this selection. For this, I need a delete the old request when I am extracting new data with the same selection criteria, in ODS and Cube.
Is it possible?
Thank you very much for your collaboration.
Regards,
Jeysi

Hi Jeysi,
DSO works on 'Overwrite' principle.
You need to check your data source.(The images your data source sends).
Even if your updating the key figures using addition method, the data source will send you the correct images and correct delta to keep your DSO as a reflection of the latest image of your source system.
Hence you would not require to delete a request with the same selection in the DSO.
Moreover, if you have a cube at the downstream of the DSO, loading deltas from the DSO to cube would alone be sufficient and you would not need to use delete overlapping request.
However, if you are loading full request to the cube from the data source with the selections of fiscal year and fiscal period , then yes you do require delete overlapping selections.
In 3.x data flow, this was configured in infopackage in data target tab there is one column for automatic deletions, here you could set the conditions on which the overlapping request in the data target(cube) in this case should be deleted.
In process chain, you can use , delete overlapping request from the process chain.under application node, load process and post processing.(This can be configured for both infopackages and DTP's)
Hope this helps,
Regards,
Sunmit.

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

Unable to Delete the request in ODS

HI Friends,
      I am facing the problem with deleting request in ODS.
          I deleted the request in cube (PPV Analysis cube). But I unable to delete the request in ODS.
    it is showing the message request is already activated;no further QM action possible.
       My system is upgraded by BI 7.0 one week before only. Please give me solution .
I am waiting for your reply.
Thanks & Regards,
Guna.

Hi,
Are there other activated requests on top of this requests?
In that case it wont let you delete this request unless those requests are also deleted.
Try to change the status to red and delete.
Else try this.
Delete requests manually from the ODS tables.
1. tcode se16.
2. delete the request in these tables : RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request), RSMONICDP, RSODSACTREQ (give the name of the ODS and the
request ID and delete all the entries pertaining to this selection in that table.), RSODSACTUPDTYPE.
The request will be removed from your ODS.
Note 947481 - P32:ODS: Deleting partially active non-condensed requests
Hope this helps.
Thanks,
JituK

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Urgen t- unable to deleted a request in ODS

Hi All,
I am trying to delete a request in ODS but the request is appearing again.
tried all the possible way. Can anybody help.
Thanks in advance
Narendra

Hi
If you wanted to delete the request any way, then
Now you can try to delete the same requests from the tables RSICCONT.
you have to modify the request no. from the table "RSMDATASTATE"(Request SID for which all requests are technically o.k.), RSBODSLOGSTATE (PSA ID )and RSODSACTREQ(Request ID and ODS activation ID).
Thanks,
Teja

Problem in deleting a request from ODS

Hi,
i am trying to delete a request (not activated) from ODS, when i checked in SM37 for the status of the job it shows as Cancelled, but when i see for the request in ODS, the requested is deleted, could anyone please let me know why job in SM37 is cancelling when the request is actually deleting,
This is not the case with activated request.
please see the worklog of the cancelled job
 Job started
Step 001 started (program RSDELPART1, variant &0000000005236, user ID KUMARV1)
Delete running: ODS object ZCFORO01, from 512,483 to 512,483
Delete is scheduled; Selection conditions were substituted
Request REQU_45IYZ9A2BQFRW0IUY5EB4MZ9W successfully deleted from ODS object ZCFORO01
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled 

Hi Arun,
Yes the system raises an exception and saying that there is an error in ABAP code, could you please let me know what is the error, i have tried this deletion with 3-4 different ODS and to different systems i.e. in Q, P system
Abap code as specified by Exception in ST22 transaction
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"RSSM_PROCESS_REQUDEL_ODSO".
The main program was "RSDELPART1 ".
The termination occurred in line 114 of the source code of the (Include)
program "LRSSM_PROCESSU19"
of the source code of program "LRSSM_PROCESSU19" (when calling the editor
1140).
The program "SAPLRSSM_PROCESS" was started as a background job.
Source code extract
000840 endif.
000850 append l_s_rnr_del to l_t_rnr_del.
000860 endif.
000870 delete l_t_rnr_del where
000880 rnr = ''.
000890 loop at l_t_rnr_del into l_s_rnr_del.
000900 l_idx = sy-tabix.
000910 if l_s_rnr_del-sid is initial.
000920 call function 'RRSI_VAL_SID_SINGLE_CONVERT'
000930 exporting
000940 i_iobjnm = '0REQUID'
000950 i_chavl = l_s_rnr_del-rnr
000960 importing
000970 e_sid = l_s_rnr_del-sid.
000980 endif.
000990 if l_s_rnr_del-odssid is initial and
001000 not l_s_rnr_del-odsrnr is initial.
001010 call function 'RRSI_VAL_SID_SINGLE_CONVERT'
001020 exporting
001030 i_iobjnm = '0REQUID'
001040 i_chavl = l_s_rnr_del-odsrnr
001050 importing
001060 e_sid = l_s_rnr_del-odssid.
001070 endif.
001080 modify l_t_rnr_del from l_s_rnr_del index l_idx.
001090 if l_min_sid > l_s_rnr_del-odssid.
001100 l_min_sid = l_s_rnr_del-odssid.
001110 endif.
001120 endloop.
001130 if sy-subrc <> 0.
 > message x000.
001150 endif.

Delete overlapping requests from ODS

Hi,
Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
Can we still delete overlapping request using abap code or the only way to do it is to delete data (selective deletion) in a start routine.
Any tips would be helpful

Hi ,
Try the following logic to delete the ovelapping requests from a particular data source.
*& Report ZV_DELETE_REQS *
*&Description:This program is for deletion of eixsting Full requests *
*& from ODS *
REPORT ZV_DELETE_REQS.
data: RSICCONT like rsiccont,
 rsseldone like rsseldone.
data: begin of i_req occurs 0,
 rnr like RSICCONT-rnr,
 end of i_req.
refresh i_req.
select * from RSICCONT UP TO 2 ROWS
 where ICUBE = 'ZCS_D10'
 order by TIMESTAMP descending.
i_req-rnr = rsiccont-rnr .
append i_req.
clear i_req.
endselect.
loop at i_req.
select single * from RSSELDONE where RNR eq i_req-rnr and
 source in ('0CO_OM_OPA_5',
 '0CS_OM_OPA_1').
if sy-subrc eq 0.
 CALL FUNCTION 'RSSM_DELETE_REQUEST'
 EXPORTING
 REQUEST = i_req-rnr
 INFOCUBE = 'ZCS_D10'
 EXCEPTIONS
 REQUEST_NOT_IN_CUBE = 1
 INFOCUBE_NOT_FOUND = 2
 REQUEST_ALREADY_AGGREGATED = 3
 REQUEST_ALREADY_COMDENSED = 4
 NO_ENQUEUE_POSSIBLE = 5
 OTHERS = 6.
 IF SY-SUBRC <> 0.
 MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
 WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
 else.
 message i799(rsm1) with i_req-rnr 'deleted'.
 ENDIF.
 do.
 select single * from RSICCONT where ICUBE = 'ZCS_D10'
 and rnr = i_req-rnr.
 if sy-subrc ne 0.
 exit.
 endif.
 enddo.
endif.
endloop.
hope it helps....
regards,
raju

To delete a request from ODS

Hello all,
I am not able to delete the request from ODS .
It gives the error message :no request found in the change log.
how shlould i delete the request??
thnx in advance.
Regards,
Dhanya.

Hello,
thnx sriram n balaji!
i checked my infosource through the prgm:RSAR_PSA_CLEANUP_DIRECTORY
the following message appears in the display log:
PSA: 8ZFIADS11_CA
Version 000 technical name /BIC/B0000043000
Partition 0003
Request Ratio:[Deleted:Total]->1 :2
Records Ratio:[Deleted:Total]->753943 :1507886 ,50 % logically deleted
Partition 0004
Request Ratio:[Deleted:Total]->0 :1
Records Ratio:[Deleted:Total]->0 :753943 ,0 % logically deleted
what should i infer from this ?
can anyone please tell me the step by step procedure to delete the request.
Regards,
Dhanya.

Delete request in ODS??

Similar Messages

Maybe you are looking for