Delete request in Open Hub Destination

Hi all,
I am trying to delete a request in an Open Hub Destination. I have tried report RSBK_DEL_DTP_REQ_FROM_OHD
but it does not work. I have also tried to set the request status to 'red' within the table RSBREQUID3RD but this also does not work.
I have no clue how to fix the problem.
I have to delete the request in case of the underlying DSO which I have to change and this is not possible if the request is active in any data target.
Please can someone give me any hint
Regards
Peter

Hi,
Use SE37, to execute the function module RSBM_GUI_CHANGE_USTATE.From the next screen, for I_REQUID enter that request ID and execute.From the next screen, select 'Status Erroneous' radiobutton and continue.This Function Module, changes the status of request from Green / Yellow to RED.
So you should now be able to delete the request.
Regards.

Similar Messages

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

DTP Delta request for open hub destination.

Hi expert,
As you know, In BW 7.0, open hub destination is used for open hub service, and you can create tranformation/DTP for the destination. and in some case the DTP delta is enabled.
my questions are
1) in the context menu of open hub destination, I did not find something like manage, which could list all the DTP request executed for this open hub destination..but for normal infocube or ods, you can find a list.
2) if the DTP could enable the delta, where can I delete the latest delta request, and have a new load..
3) I assume the DTP could be excuted with batch integrated with process chain by process type 'DTP', right ? if the destination type is third party tool, can it also be integrated with process chain ?
4) can give some obvious difference of InfoSpoke and open hub destination in terms of advantage and disadvantage..
Thanks a lot for the feedback.
Best Regards,
Bin

Hi ,
Please look at the links below . hope it helps .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d063282b-937d-2b10-d9ae-9f93a7932403?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e830a690-0201-0010-ac86-9689620a8bc9?QuickLink=index&overridelayout=true
Regards
Santosh

Unable to delete Open Hub Destination

Hi,
I have created an Open Hub Destination in RSA1-> Modeling-> Open Hub Destination.
However, when i try to delete it, i have this error:
Error while deleting open hub destination
Anyone has any idea how to delete an Open Hub Destination?
Thanks,
CH

Here is the message when deleting DTP with Delta update:-
Delta DTP cannot currently be deleted (see long text)
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
According to the message, i need to delete all request. How to do that?
Appreciate your help. Thanks.

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Open Hub Destination transports

Hi Experts..
We have crated Open Hub destinations to pull data from ODS to DB table in BI 7.0. But while transport the transformations for OHD are failing with transformation becoming inactive with error messageu201D Target ODSO ZODS*** does not exist" But the ODS is present in QA system and is in active version.
So can any one pls help me to know the proper sequence for Open Hub Destination transport and the necessary objects to be captured in the request? Currently I had captured OHD, transformation and DTP in the same request.
<removed by moderator>
Regards,
Umesh.
Edited by: Siegfried Szameitat on Jan 16, 2009 11:57 AM

Send the OHD in one request, transformations in one request, then DTP in another request.
When club transformations & DTP together it fails in my experience.

I am getting an dump while executing open hub destination?

I did happened to delete a filed in the open hub and then activated and re-ran it i am getting the following error!!
error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
open hub is active, dtp is active and transformations is active too but still the same!!
Can anyone advise me on this!!
thanks
pooja

Hi,
See in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Analysis Process Designer (APD)
Analysis Process Designer (APD): Part - 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f06353dd-1fe3-2c10-7197-dd1a2ed3893e?quicklink=index&overridelayout=true
Analysis Process Designer (APD): Part - 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%20Part%20-%202.pdf
Analysis Process Designer (APD): Part - 3
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%3a%20Part%20-%203.pdf
Thanks
Reddy

How to save a open request with open hub?

Dear experts,
we want to save a query result in an open hub destination. So at first we want to store the data in an ods object (we use bw 3.5) which was filled by the apd. The we want to tranfer the delta to the open hub destination which is connected with our bpc ms system. How can we care for extracting only closed requests from the open hub? And is it possible to extract the data from an ods which was filled by an apd??
Thanks an regards,
Gerrit

Hi,
In APD we use direct update DSO. SO its better to load the data from this DSO to one standard DSO or a cube. Then you can create a delta DTP, which can fetch request based delta to open hub destination.
Hope it helps,
Pravender

Open Hub Destination - Transport Error

Hi,
Following error occured while transporting the Open Hub Destination(OHD) to QA.
Created OHD using Logical file as File type.
Syntax group: WINDOWS NT.
Transport Error Log:
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Activation Mode)
Application server bidwXXX does not exist.
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DEST L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
are we missing anything configuration here?
Regards

Ananda,
This is my file path in Dev:
D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> in this path i have mentioned BWD instead of <SYSID> initially, it failed so i thought i would give a try by giving the parameter <SYSID> instead of BWD, even that failed.
When i have transported OHD with the path D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> it was created in QA in the same directory as mentioned in Dev.So i believe i have the right file path in QA.
Thanks.

How to change the nodes open hub destination objects?

Hi,
How one can change the nodes of open hub destination objects?
As there was a need to change the nodes for certain open hubs i wonder how this could be acheived?

well,
I have open hub destination object saved under one node ( Yes that is Infoarea only )
but now i notice that i need to save this open hub under different info area..
so how can i change the infoarea of an open hub with out deleting and recreating it?

Use of Open Hub Destination to load data into BPC

Hi Gurus,
I want to load the data from SAP BI to BPC (NW version), using Open Hub Destination. I want to know few things about this.
1) What method should I use? Should I use Destination as Flat Files or Database tables? If Database tables, how can I use this data in the tables in BPC?
2) If I go for Flat Files, which is saved in the application server of BI, how can I import those files to BPC and use it using Data Manager?
3) Also, in case of Flat Files, there are two files which are created. One is the control file and other one is the data file. How can I use both of them? Or can I just use data file without header?
Your replies will be much appreciated.
Thanks,
Abhishek

Hi Anjali,
I can use the standard data manager package from BI to BPC, if the CSV file is available in the BPC Server or in case if I am directly extracting from BW object, InfoObject or InfoCube.
But, since I will be using Open Hub, the output of this can be in a Database Table or a CSV file, preferably in SAP Application Server. In such cases, how can I use the Database table or CSV file in the standard Data Manager Package?
Thanks for your reply.
Abhishek

Open Hub Destination question

Hi,
We want to be able to extract data from a cube and would like to use Open Hub Destination for it. We also want to extract deltas.
The question is ..
Should we be making a single info package for this with delta capability ..
or 2 separate info packages .. 1 for full mode and another for delta mode.
Regards
Vandana

Hi,
Yes what you said it is write
from which cube do u want to retract the daat that cube will be the source
first create the open hub in RSBO tcode and
in open hub destination select aht and create the transformation between the table( to where u want to export)
then create the DTP between the cube to the table
and directly u can use the delta DTP first all the records will come and later onle delta records will be updated.
Thansk & Regards,
sathish

Open Hub Destination error

Hi,
I am working on Open Hub (first time ofcourse). And performing following steps:-
Modeling>Open Hub> InfoArea> Create Open Hub Destination> Output to File .csv. field names>DIrectory> activate> Create transformation> activate Transformations>Create DTP..Here I am getting an error that destination Open Hub is not active.
Can anyone please tell me am i missing any step here?
Thanks

Hi...
Always bear in mind that the OHD, once created, should be saved and activated, before creating any transformations or DTPs for it.
And each time the OHD is changed, all the objects corresponding to it... (The transformations and the DTPs) should be activated.
Hope this helps.
Thanks
Sree Ramya Lanka

To view the data in open hub destination

Hi all,
Can anyone help me out how to check the data in open hub destination file.
These are the details:
Destination: File
Type of file : Logical file
Application Server file name : XXXXXXX
If it was file name, i know it has to be checked in AL11 with directory name and file name.
Here its a logical file name. Which is the directory corresponding to this?
Thanks,
tinkugeo

Hi,
Question: "Are all the logical files are saved in the home directory DIR_HOME?
Please correct me if I am wrong"
Ans: When you create an Open hub destination using Physical file, the file will get created in DIR_HOME directory (by default) in AL11
And for locating the physical path in AL11. Go through the below link. it gives ans to all your ques
http://bx.businessweek.com/sap/view?url=http%3A%2F%2Fweblogs.sdn.sap.com%2Fpub%2Fwlg%2F17370
Edited by: kumkum basu on May 20, 2010 8:20 AM

Delete request in Open Hub Destination

Similar Messages

Maybe you are looking for