Delete Reverb and Delay Aux Channels

I want to save all the processor power I can, so I want to completely delete the default reverb and delay bussed aux channels that come up automatically when you start a new concert. When I select them, Delete is gray-ed out under the edit tab. How can I get rid of these?

Hi
These are Concert level channels, so to delete them you will need to select the Concert at the top of the Patch List.
You may also want to remove any associated Sends.
CCT

Similar Messages

Reverb And Delay Problems

Hi guys
I have a MAC 10.3.9 , Motu 828 , Logic 7
Im wondering if people have the same problems as me with Reverb and delay.. But mainly Platinum Reverb
I get the Reverb occuring 1 second after the wav file plays and it sounds more like a bang than reverb.. If I play the file 1 bar before the chosen reverb position it doesnt do it. But if I start the song from the start and let it run until it arrives at the bar it does this... I dont get this issue with any other plugings like Space designer
This problem I notice occurs also on previous Windows versions......
Is there also a fix up for dissappearing wav file windows when double clicking them?
Cheers Ivan

Does this only happen with a specific WAV file? Or with all WAV files? Have you tried converting the file to an AIFF in the Audio Window (or with some other app, like iTunes)?

Recording from sub and an aux channel

How can you record from a sub or an aux?
Fresh_oil

Are you actually sending some of each of the six tracks to the bus?
(little knobs next to the bus assignment under "sends")
Do you have the Aux or any of the 6 tracks muted?
DO you have the master muted?

How do i use a Aux channel with reverb from two different patches

I have a Concert with an Aux channel strip for Reverb and i want two seperate patches to both use Send 1 with different amounts/level of reverb but when i move the fader on the patch and then go to the other patch the fader has moved back to the down position
Hope this makes sense
P.S i know i can do it with two separate buses but want to keep it tidy
Thanks

1: select an instrument channel, go the parameter of the channel then change the midi channel to "ALL"
2: insert the Multitimbral sampler of your choice ( RMX, hypersonic or what ever) and load the sounds you want onto them
3: open environment, in the environment parameter it shows AUDIO click hold it and select ALL OBJECT, then go to view and untick "BY TEXT"
4: connect the GM DEVICE to the channel that has the Multitimbral Sampler on it'll ask Do you want to remove the channels port setting? click remove
thats it
Now go to the arrange window and you can use all the 16 midi channels to control one Multitimbral Sampler
that means midi channel 1 will control what ever sound is loaded in the first slot on the Multitimbral Sampler
lemme know if there was a mistake along the line, i'm a bit tired gotta help out
stash

HT6030 Having major Mail problems since I updated Maverick on my 27" iMac. Delays deleting emails and moving emails to other folders. Anyone else having this issue? If so, any known fixes?

I have an iMac that around 3 years old. Just installed Mavericks when it first was released. I also have a Time Capsule (2TB) that runs my network to my other three Apple devices: iPad2, iPhone 5s and a new Apple TV. Having major Mail issues here. Everything is very delayed and extremely slow. Moving emails to other folders sometimes takes a few minutes and the same goes for deleting emails. Delete them and they don't go into the trash for several minutes. It's getting very frustrating to say the least. Mail also quits very often. Mail also will freeze with the little color ball spinning, therefore I would have to force quit Mail. When the errors occur, it's automatically sent to Apple but there hasn't been an update since 10.9.1 that has fixed it. Apparently, that update was only for gmail issues. Anyone having the same problem? Fixes please?

I have my entire network and all Apple devices setup as IMAP, not POP. If your settings are setup as a POP account on all devices, emails will not erase when deleted on your other devices. Just something to keep in mind. I'm sure you're aware of this but just wanted to throw it out there. Google IMAP vs POP. However, it seems like your having the same issues as I am. I'm going to swing by an Apple store by me and speak to the genius bar and see if they can come up with something or are aware of this issue. Keep you posted.

Sending vocal tracks to an Aux channel with reverb

Sorry for this question that may have been answered somewhere else.
I'm trying to add a single reverb plug-in to 6 vocal tracks. I've bussed all 6 to an Aux channel via bus 1, setting the input of the Aux channel to bus 1. No sound. I can't seem to find the correct routing. Anyone know the answer to this simple task. I'm coming from ProTools where I had no problem with this.
Thanks.

Are you actually sending some of each of the six tracks to the bus?
(little knobs next to the bus assignment under "sends")
Do you have the Aux or any of the 6 tracks muted?
DO you have the master muted?

Backspace to delete aux channels doesn't work here

How is it that in LPX I can't delete unused aux channels in the environment? I did it flawlessly in LP9, using backspace after having select it, but it seems to not work in X. It works only in the Mixer window... Why???
Any help?
Thanks

I have a similar rule to purge email. Works like a champ.
Since the rule isn't being automatically applied to incoming email, you first need to select the mailbox that contains your "old email". Select all the email in that mailbox, then either go to the Mail menu (Messages>Apply Rules) to run the rule, or use Option Command-L.
Make sure that's the only Rule you want to run, otherwise ALL your selected rules will be applied! In other words DESELECT (uncheck) rules you don't want to apply...
Hope that helps.

Annoying instant aux channel strip question

Howdy all,
Has anyone else been bugged by the following behavior in MS.
I'm working in a patch, and I have channel strip with verb and input bus 3. I also have a delay channel strip, and I decide to send the delay to the verb by instantiating a send to bus 3.
This works fine, except MS also makes an extra aux channel strip at the concert level with input bus 3. This serves no purpose, and I have to move the to concert level to delete this unwanted channel strip.
Am I missing something here, or is this just way it is?
Thanks for anyones input.

Howdy all,
Has anyone else been bugged by the following behavior in MS.
I'm working in a patch, and I have channel strip with verb and input bus 3. I also have a delay channel strip, and I decide to send the delay to the verb by instantiating a send to bus 3.
This works fine, except MS also makes an extra aux channel strip at the concert level with input bus 3. This serves no purpose, and I have to move the to concert level to delete this unwanted channel strip.
Am I missing something here, or is this just way it is?
Thanks for anyones input.

How do I send a stereo signal to an AUX channel in Logic?

Hi Peeps,
I'm currently using Logic Studio 8 and I'm getting really annoyed with the fact that when I take a send 'post fader' from a stereo audio channel to a stereo AUX channel, the post fader signal seems to ignore any panning adjustments. Its like the send is only sending a mono image??? For instance, if I pan a synth track hard left I can still hear the wet reverb signal on my AUX track on the right, its annoying! I could always pan the AUX channel left, but obviously I would like to use that AUX channel for effecting numerous tracks, not all of which will be panned hard left!
I dont have this problem in pro-tools as you can choose to send the signal to a mono or stereo bus channel, but I cant find an option for this in Logic for love nor money!
Help!
Orbz

Hi Orbz,
There are 3 Send modes in Logic:
• Pre Fader (original signal is sent before it reaches the channel strip's fader etc.
• Post Fader (sent before volume fader adjustments)
• Post Pan (send before volume fader and Pan/Balance adjustments).
Click and hold on the Send slot in your synth channel strip and select Post Pan fro the drop-down menu.
Funnily enough I've just finished writing a tutorial about this very topic!! It's not published yet, but will appear on the macProVideo.com blog in the coming days...
http://www.macprovideo.com/blog/

Aux Channel design flaw or bug ???

Hi !
I only ever need to use the Aux channels because the Buss channels don't allow you to insert a Send. A rather unwieldy solution to an otherwise simple requirement.
Now here's the problem. Irrespective of whether the Buss source and Aux is set to stereo or mono ( whatever config I try ) the aux can't receive the signal if the Buss channel is panned to the right !! Left input, no problem
Is this a design flaw, a bug, or is there something I'm missing ?
I know there is a workaround to this problem - the same Audio copied to multiple track channels, but that creates a rather inelegant mixer.
I've also read elsewhere in this forum about delay/phase problems when using Aux channels.
Any pointers appreciated.
Thanks

Tele, I'm surprised that you'd make a comment like that.
It's easy to tell the bugs from the features: the bugs are when the features don't work. And there are ample enough features... I mean bugs... in Logic to help make that distinction.
Or did I really mean to say "enough bugs"...
Well, as Space Ghost once put it, "It's that easy, and it's that hard".
-=iS=-

X-Fi Midi Synth Reverb and Chorus Controller Is

I bought an X-Fi a couple of weeks ago, and I soon realized that midi effects controllers cc9 and cc93 (reverb and chorus) didn't work with the X-Fi hardware synths. I called CL Technical support about this and this is the response I got:
"I have spoken with our testers who say that the CC9-Reverb and CC93-Chorus amounts are set in theSF2 file. That value is typically set to hit 20% at maximum CC data entry (27). To work aroundthis, you will need to use NRPNs to set the amount to a greater level, or edit the SF2 contentitself. Please let me know if this information hel
ps.
No, it doesn't help, reverb and chorus effects in midi files are set with midi controllers #9 and #93, this is true of virtually every midi file available on the internet, including commercial midi files. CL's testers are wrong. SF2 files have embedded minimum amounts of reverb and chorus for certain patches, midi song files customize the amounts of reverb and chorus with controllers cc9 and cc93 to suit each particular song, and even change it during the song. Adding NRPN's involves editing the midi file by calculating the MSB and LSB for each desired value and adding four controllers for every channel of every song every time you want a change in the effects. Controller cc9 and cc93 have control sliders or knobs in every major audio/midi multitrack program and these require no editing. A midi synth that ignores this loses much of its realism, and this just isn't acceptable for those of us who make serious use of midi song files. I have several thousand midi files and it would take months or even years to edit them all. This is a bug that may only affect a small percentage of X-Fi users, but for those it affects, it's a major bug. From the response I received from tech support, it appears that they aren't planning to do anything about it, so I thought I would publicize the issue here and see if I can't change their minds. I drove a 20 mile round trip and paid $40 for my X-Fi and I've had to pull it out of my computer and put my Audigy back in. I'm not a happy camper at this point, but if CL is going to fix the issue, I'm willing to wait for a while because I think thye X-Fi is worth it.

mriev wrote:
Maxing everything was the first thing I tried, and no go. Still so little reverb it was hard to tell if it was working, and no detectable chorus. I even went back with Vienna 2.4 and checked my soundfont again, and all was as it should be.
Putting together a brand new sound card is a major undertaking and it's understandable if something gets missed here and there, especially as most of the designers and testers probably aren't serious musicians. It's easy to see how this one could slip past, especially if they were using Soundfonts that have reverb and chorus programmed in to some of the instruments. Everything works fine until you start varying cc9 and cc92 and nothing happens. I haven't checked because I removed the X-Fi and put my Audigy back in, but it's a good bet that none of the midi effect controllers work properly. This is a relati'vely minor issue for most users, but for serious musicians who use midi, it's major. However, I'm sure CL will fix the problem as soon as possible. I just hope it doesn't take too long because the X-Fi is a really, really good sounding card, except for this one problem.
Gi've the X-Fi another try. I had these same issues at first but now cc9 and cc92 work in Sonar4.
These controls work, its just that the reverb is very low and the chorus has to be activated. In the effect editor choose the amphitheater preset as oppose to the default for reverb as it is the most audible.
follow these steps:
. choose creation mode
2. enable EAX effects and set to max
3. select amphitheater preset for reverb
4. activate the 5 bus buttons for chorus in master aux effects box (Front L\R, ect)
step 4 should work best for stereo setup
This should do it.

How do I send audio tracks to an Aux channel

I want to send 3 channels of back up vocal to an Aux channel.
An Aux channel has Sends, which a Bus does not. I EQ and set the levles on each channel. Then after I have a good blending mix, I would like to send them to an Aux channel and use a compressor & limiter.
The point is to send the processed vocals from the Aux to a Bus that has a good reverb and then turn the send knob depending on how much of the backup vocals I want to send to the reverb on the Bus channel, and also that I can assign other channels to that bus too. When I click under the I/O on one of the channels, there are only Bus options.
How can I get vocals in to an Aux channel and control the volume, compression, and limiting and then send them to a Bus?

Route your audio track to bus 1 (for example) . . . now on an Aux object, set it's input as Bus 1. Now you are free to use the Sends on Aux 1 (to a different Bus) as you see fit.

Removing Aux Channels in the mixer

Hello people, does any body know about this? I´m trying to delete an Aux Channel in the mixer that I don´t need anymore, I have checked the manual, etc and i cannot believe you cannot remove a Aux channel ... I mean it should let you arrange your mixer the way you want ... Thanks in advance for the help.

Hmm... As soon as I select an Aux track in the mixer, and then hit the "Delete" button, I'm given a prompt telling me that I'm about delete objects that are assigned to tracks in the Arrange Window.... Do I want to "Cancel", "Delete Anyway", or "Delete Used and Continue".
So I absolutely can delete an Aux track from the Mixer window, even one in use.
How are you trying to delete it?

Is there a way to have more than 2 aux channels?

I'm using ultra beat with multiple outputs and want to be able to break down the parts into different channels. At the moment I have it routed through two aux channels but I'm struggling from here on. I've done it before but don't remember how.
How does everybody else do it and can you create more than 2 aux channels?

Go into the environment window and create new audio objects. In the parameter settings for each audio object, you can assign them to new aux channels. Every time you assign a new aux channel, Logic will allocate more aux channels for you to use (up to 64).
jord

Imessage never deletes messages and shows them to anyone who wants to see them

here's the problem that in my opinion can cost millions of $$ in court for Apple:
iMesage never deletes conversations. If you delete a converstion from the list, it is still cached on the device. Problem is present in iOS6 & iOS7.
Do the following:
1) spotlight settings should have messages selected for search results
2) open Messages.app and delete a conversation that had iMessages there
3) open spotlight and search for something that the dialog contained
*not everything will be found though, I guess it doesn't cache everything or delete the oldest / doesn't cache the newest nessages fast*
4) you will be surprised when your deleted conversation shows up
5) for an even more unpleasant surprise, turn off and log out from imessage. Your conversations will still be displayed in spotlight.
Best words to look up on your significant other's iDevice: dear, kiss, love etc.
6) To make things even more interesting, spotlight will neither display the sender of the message (i.e. if it is a message or reply from your contact), nor the date. Plus it picks phrases out of context in such a way, that they will look more than interesting.
P.S. iMessage ruined my relationship with a girlfriend. Should I mention how angry I am?
P.P.S. the only way to stop iMessage from hijacking deleted conversations and terrorising you is to do a clean restore of the device. Set it up as new. Cached messages are backed up - if you restore from backup, they will still be there.
Some images to clarify this:

You said you text a lot - if your inbox and sent message folder is FULL, it could also cause delays. Try deleting messages, then restart the phone. It should work until the folders are full; then delete and restart, or just delete your messages every day.

Delete Reverb and Delay Aux Channels

Similar Messages

Maybe you are looking for