Delete SLD Registration in RWB

Hi,
      I would like to delete the component Name (Adapter Engine) listed in Non-central components, as the host name/system doesn't exists anymore. The reason I would like to delete is, whenever we make the changes to any IB objects, save and activate and error messge pops up with this host name.
Thank you

Go to SLD -> Technical Systems -> Technical System Type (process integration) ->
If you find the relavent adapter engine.. remove it and try..
http://wiki.scn.sap.com/wiki/display/XI/How+to+Manually+Correct+the+Registration+of+XI+Components+Within+the+SLD

Similar Messages

  • RWB / SLD Registration / MsgUrl is null?!?

    Hi there,
    i have a Problem. when i go to the SLD Registration in the RWB to Register
    Runtime Workbench
    Repository
    I Become the Message:
    Runtime Workbench reports registration status: completely registered
    XIDomain.IntegrationServer.MsgUrl: MsgUrl of Integration Server is.00.server1 is null.
    XIDomain.IntegrationServer.SecureMsgUrl: SecureMsgUrl of Integration Server is.00.server1 is null.
    XIDomain.IntegrationServer.BusinessSystem: BusinessSystem is null. No BusinessSystem associated to the Integration Server is.00.server1.
    also on the Adapter Engine
    Messaging URL of Integration Server: URL currently used by Adapter Engine is null!
    Messaging URL of Integration Server: URL stored in SLD is null!
    Messaging URL of Integration Server: URL currently used by Adapter Engine and URL stored in SLD are the same
    XIDomain.IntegrationServer.MsgUrl: MsgUrl of Integration Server is.00.server1 is null.
    XIDomain.IntegrationServer.BusinessSystem: BusinessSystem is null. No BusinessSystem associated to the Integration Server is.00.server1.
    The directory is another message:
    Directory: Unable to get directory instance and read data from SLD; details: Unable to create an object that represents the SLD entry for the XI component
    Can someone help here?
    Regards
    Edited by: Bjoern Bayerschmidt on Jun 2, 2010 8:55 AM
    Edited by: Bjoern Bayerschmidt on Jun 2, 2010 8:56 AM

    and you looked at both notes?
    all of this was provided in the two notes in my first post.....  if this did not work.....
    Solution
    Checking completeness and consistency of SLD
    First check whether the PI structures in SLD are incorrect. Start the SLD user interface (http:<host name>:<port>/sld), navigate to Technical Systems --> Process Integration
    For a correct PI registration, the tabular display of the PI structure must contain the following entries:
    - One entry for the domain of the Integration Server
    - One entry for each PI component: Integration Server, Adapter Engine, Directory, Repository and Runtime Workbench (RWB). Each must be assigned to the domain above, i.e. the domain name must appear in column "Domain".
    If some of the PI components Adapter Engine, Directory, Repository or Runtime Workbench are missing in the table, you need to explicitly register those as described below. If they appear in the table, but are not assigned to a domain, you have to delete them and register them explicitly.
    Deleting PI components
    Navigate to
    Technical Systems --> Process Integration
    Select the components you want to delete, push "remove" button.
    Beware: Do not accidentally delete the XIIntegrationServer.
    Triggering SLD Registration of PI components
    You can trigger registration of a PI component by restarting the associated application. Navigate to the start/stop UI in the Netweaver Administrator:
    http:<host name>:<port> --> SAP Netweaver Administrator --> Configuration Management --> infrastructure --> application modules
    Here you restart the applications for the missing PI components:
    com.sap.xi.directory (Integration Builder/Configuration)
    com.sap.aii.af.app (Adapter Engine)
    com.sap.xi.rwb (Runtime Workbench)
    com.sap.xi.repository (Integration Builder/Design)
    this is why i gave both notes as the information you provided was far from complete...
    what version are you using?  is it a new install?  or a restore?  or did it just go like this???

  • PIRWBUSER / not enough Permissions / SLD Registration / Adapter Engine / PI

    Hi Community,
    i have a Problem. I go to the SLD Registration in the RWB
    When i click on Adapter Engine and Register i become the Message
    Adapter Engine P11 (HOST): Unable to get Adapter Engine instance and read the data from SLD; details: Cannot connect to component Adapter Engine P11 (HOST); user PIRWBUSER does not have sufficient authorization to call servlet at URL http://HOST:50000/AdapterFramework/regtest.
    My PIRWBUSER has the following Roles:
    SAP_SLD_CONFIGURATOR
    SAP_XI_RWB_SERV_USER
    SAP_XI_RWB_SERV_USER_MAIN
    Can someone help here?
    Regards
    Bjoern

    Hello!
    Apply the note below according to your system version:
    999962 - PI 7.10: Change passwords of PI service users
    936093 - XI 7.0: Changing the passwords of XI service users
    721548 - XI 3.0: Changing the passwords of the XI service users
    If not worked, try working with the SAP_ALL and check if works.
    Regards,
    Caio Cagnani

  • SLD registration for TREX not working...

    SDN Members,
    I am unable to register TREX in SLD. I have put in an OSS message; however, I have yet to receive a response back from SAP... So any help would be much appreciated.
    Thanks,
    -Patrick
    Steps for the Reconstruction 
    1. Generate SLD Configuration file:
    sldreg -configure /usr/sap/TXD/TRX85/slddest.cfg
    2. Copy the SLD Config. File to the Global SLD Directory and run
    command (to transfer data to SLD):
    saposcol -b | sldreg -connectfile slddest.cfg -stdin -oldtransferdtd
    Receive the following:
    (hostnames, ip's, and ports altered to protect the innocent)
    prtdiag can only be run in the global zone
    Thu Dec 27 10:33:04 2007 SLD Registration Program [2.0]  (May  8 2006) [None Unicode]
    Thu Dec 27 10:33:04 2007 No XML data input file set. Will read input data from standard input.
    Thu Dec 27 10:33:04 2007 Supplier Name: ComputerSystem / Supplier Version: 1.0 / Supplier Vendor:  / CIM Model Version: 1.3.21
    Thu Dec 27 10:33:04 2007 Group:
    Thu Dec 27 10:33:04 2007 Group name system1
    Thu Dec 27 10:33:04 2007 validateAttributes OK
    Thu Dec 27 10:33:04 2007 Property Status
    Thu Dec 27 10:33:04 2007 Value OK
    Thu Dec 27 10:33:04 2007 Property NameFormat
    Thu Dec 27 10:33:04 2007 Value IP
    Thu Dec 27 10:33:04 2007 Property Caption
    Thu Dec 27 10:33:04 2007 Value hostname01
    Thu Dec 27 10:33:04 2007 Property Name
    Thu Dec 27 10:33:04 2007 Value usahstxutxd01
    Thu Dec 27 10:33:04 2007 Property IPAddress
    Thu Dec 27 10:33:04 2007 Value X.X.X.X
    Thu Dec 27 10:33:04 2007 Property OpSysReleaseName
    Thu Dec 27 10:33:04 2007 Value SunOS
    Thu Dec 27 10:33:04 2007 Property OpSysCategory
    Thu Dec 27 10:33:04 2007 Value Solaris
    Thu Dec 27 10:33:04 2007 Property VendorRelease
    Thu Dec 27 10:33:04 2007 Value SunOS 5.10
    Thu Dec 27 10:33:04 2007 Property CPUType
    Thu Dec 27 10:33:04 2007 Value sun4v
    Thu Dec 27 10:33:04 2007 Property MachineCategory
    Thu Dec 27 10:33:04 2007 Value SPARC
    Thu Dec 27 10:33:04 2007 Property OpSysBits
    Thu Dec 27 10:33:04 2007 Value 64
    Thu Dec 27 10:33:04 2007 Property NumberOfCPUs
    Thu Dec 27 10:33:04 2007 Value 32
    Thu Dec 27 10:33:04 2007 Property CPURate
    Thu Dec 27 10:33:04 2007 Value 1200
    Thu Dec 27 10:33:04 2007 Property PhysicalRAMInMB
    Thu Dec 27 10:33:04 2007 Value 65528
    Thu Dec 27 10:33:04 2007 Property VirtualRAMInMB
    Thu Dec 27 10:33:04 2007 Value 87224
    Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
    Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
    Thu Dec 27 10:33:04 2007 HTTP trace: false
    Thu Dec 27 10:33:04 2007 Data trace: false
    Thu Dec 27 10:33:04 2007 Using connect file 'slddest.cfg'.
    Thu Dec 27 10:33:04 2007 No key file 'slddest.cfg.key' used.
    Thu Dec 27 10:33:04 2007 *** Start SLD Registration ***
    Thu Dec 27 10:33:04 2007 Used URL: http://hostname01:50000/sld/ds
    Thu Dec 27 10:33:04 2007 HTTP open status: true - NI RC=1
    Thu Dec 27 10:33:04 2007 HTTP send successful.
    Thu Dec 27 10:33:04 2007 Return code: 401 --- Return message: (Unauthorized)
    Thu Dec 27 10:33:04 2007 HTTP response: Failure. HTTP status code: 401
    Thu Dec 27 10:33:04 2007 *** End SLD Registration ***
    Thu Dec 27 10:33:04 2007 Data send status: false
    Consequently SLD is not updated with TREX information. Using IE I can go to
    the url http://hostname01:50000/sld/ds , get popup asking for
    credentials (we log in using SLDDSUSER account - w/ Basis Admin level
    auth.), and we receive: Page Cannot be displayed (HTTP 400 - Bad Request
    Internet Explorer ).
    If we go to http://hostname01:50000/sld and login with the same
    account (SLDDSUSER) we see the full SLD Toolset.
    Edited by: Patrick Riggins on Dec 27, 2007 6:06 PM

    UPDATE:
    We were able to work through and
    resolve the error we initially posted in this Thread. Now we run sldreg
    and all looks good; however, we are seeing nothing in SLD (on our XI
    System) even after stop/restart of SLD Server:
    Steps for the Reconstruction 
    1. Generate SLD Configuration Files:
    sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
    2. Copied files to Global SLD
    /sapmnt/TXD/global
    3. Run command to transfer data to SLD:
    saposcol -b | sldreg -user <user acct> -pass <password> -host
    <hostname> -port <port #> -datatrace -httptrace -
    logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
    Looks successful:
    Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
    Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
    Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
    Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
    Thu Dec 27 20:31:06 2007 Data send status: true
    However in SLD , under content maintenance selecting "All With
    Instances" in the dropdown list and "Class" , no TREX Services showing.
    And no technical system showing for TXD (TREX System)

  • BAPI to delete VAT registration number.

    Hi,
    I need to delete VAT registration number assigned to business partner programatically. Is there any FM or BAPI available for it?
    Thanks.

    Hi,
    To deal with tax numbers, you can check the package BUPA_TAX. There you will find the BAPI's and FM which might be helpful to you. Example: BAPI_BUPA_TAX_REMOVE or BUPA_TAX_REMOVE.
    regards,
    Rimzhim

  • How to delete datasource registration from the administration tool?

    Hello,
    How could I delete datasource registration from the administration tool?
    Thank you
    Krisztian

    Hi Krisztian,
    You can not delete the datasource from the admin tool, but can do so
    from the iPlanet registry -
    - invoke kregedit
    - Go to Software\iPlanet, Application Server, 6.0, DataSource
    - Select the datasource you want to delete, Choose Edit-Delete from the menu
    to delete the datasource.
    Regards,
    Jitin Sood.
    "Krisztian Maraczi" <[email protected]> wrote in message
    news:9kdhb2$[email protected]..
    Hello,
    How could I delete datasource registration from the administration tool?
    Thank you
    Krisztian

  • Initial Setup Problem - Starting the SLD Registration process

    Hi,
    we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
    We have restarted the system but after starting again the wizard it stands still again.
    Same problem on our PI quality assurance system.
    PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
    Steps of installation:
    1) Installation of PI 7.11
    2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
    3) Kernelupdate to 106
    4) Updates SPS7 ABAP
    5) Updates SPS7 JAVA
    6) Run NWA Initial Setup with J2EE_ADMIN
    Could someone help?
    Thanks
    Regards
    Thomas Mühl

    Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

  • Sld registration

    Hi all,
    after running note 764176 I can now only see my DEV and QA objects in my master SLD.
    My PROD components (adapter engine, integration server etc.) are not self registrering in the Master SLD.
    How could I make this happen? (I would like my master to have ALL the components, and then trasnport the PROD components to the my slave SLD)
    Thanks!

    UPDATE:
    We were able to work through and
    resolve the error we initially posted in this Thread. Now we run sldreg
    and all looks good; however, we are seeing nothing in SLD (on our XI
    System) even after stop/restart of SLD Server:
    Steps for the Reconstruction 
    1. Generate SLD Configuration Files:
    sldreg -usekeyfile -configure /usr/sap/TXD/TRX00/slddest.cfg
    2. Copied files to Global SLD
    /sapmnt/TXD/global
    3. Run command to transfer data to SLD:
    saposcol -b | sldreg -user <user acct> -pass <password> -host
    <hostname> -port <port #> -datatrace -httptrace -
    logfile /usr/sap/TXD/TRX00/sld_reg.log -stdin
    Looks successful:
    Thu Dec 27 20:31:06 2007 HTTP body length: 0 --- HTTP body: empty
    Thu Dec 27 20:31:06 2007 Return code: 200 --- Return message: (OK)
    Thu Dec 27 20:31:06 2007 HTTP response: Success. HTTP status code: 200
    Thu Dec 27 20:31:06 2007 *** End SLD Registration ***
    Thu Dec 27 20:31:06 2007 Data send status: true
    However in SLD , under content maintenance selecting "All With
    Instances" in the dropdown list and "Class" , no TREX Services showing.
    And no technical system showing for TXD (TREX System)

  • Accidently  deleted sld Now page acannot be displayed

    I accidently deleted SLD form localhost/sld url and now i cannot change or add the sld.It gives page cannot be displayed.PLs advice how to fix it  or should i reinstall it?
    George

    sorry it was a problem with date and license expired

  • How can I delete my registration of a PS Elements 8 installation on a computer which is already sold (and formatted)?

    How can I delete my registration of a PS Elements 8 installation on a computer which is already sold (and formatted)?

    You can go to the Apple online store and purcahse a copy of Mountain Lion.  This will give you a redemption code, which you can use to download Mountain Lion from the App Store.  Unfortuantely, I'm not aware of any other way to legally purchase it.  I have never seen Apple release Muontain Lion on DVD.
    In terms of Apple Service, they just need the serial number of the machine to check the purcahse date.  It is usually correct, to within a few weeks.  A quick Google search should give you the correct number to dial.
    I hope this helps.

  • PI 7.1 How to delete  Messages Holding in RWB

    Hi Team,
    Its regarding messages with  HOLDING status in RWB. I have seen blogs how to process EOIO messages.
    But in my case , I have more than 10000 messages in HOLDING status . Though it is DEV box i dont want to process all those messages, which belongs to diff scenarios and  yrs old messages.
    1) I want to delete all those entries (Dont want to process again) from JAVA queues .
    2) in PI 7.1 RWB -> In config table , I didnt find "Conversion ID" , but I can see Sequence number . Is this Conversion ID renamed ? OR How can I find JAVA QUEUE name.
    3) Whats the process to clear entries in JAVAQUEUES .
    Thanks
    Drumi

    HI  Drumi,
    Quality of the service is EOIO the messge are structed in Adopter engine and integration engine.
    Adopter engine in the sence holding status
    Integration engine means NDLV status.
    you saying HOLDING satus.....
    Did u find any error mesage in messaging system monitoring tool.
    if u find any sys error message... delet the that error and do refress. it will process. one error message will strucked all message.
    holding means the message are strucked. it will process slowly.just find any error are there.
    Thanks and regards,
    Kesava.

  • Is it possible to delete a registration?

    I had previously registered with the community support forums under a different username and email than the My Verizon Registraion username and email.  Is it possible to delete the first forum registration so I can make it the same username and email as the My Verizon  one?

    I have a similar situation. I had Verizon wireless for a long time and my username was always Hurricane350. I also have MyVerizon on the resedential side as I have FIOS Internet & TV. My username is Hurricane350 over there too. I had left Verizon Wireless about two years ago and now I am back with VZW. I would like to use my Hurricane350 across both sites (resedential & wireless) but when I go to register my number, it says username in use. When I try to recover/reset my password, I enter my mobile number and it says to register. I'm in a loop! Help!

  • Deleting HP Registration tile

    I'm having trouble deleting the Register with HP tile.  I click it and never get to the Unpin option, just reopen the tile.  Is this a problem with all HP2000 laptops or has Windows 8.1 screwed up?

    Hi spaceangel, welcome to the HP Forums. I just did a test on a Windows 8.1 notebook here, and was able to unpin the Register tile.  When you log into your notebook, do you have administrative rights? Can you unpin other tiles?
    I am not sure if this will help you, but take a look at this other thread:  removing HP registration tile from start screen in Windows 8.1
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • J2EE SLD registration

    I want to register a J2EE instance into a SLD that runs on a separate XI instance. The registration of the XI J2EE instance itself into the SLD works fine but when i register the other J2EE instance with exactly the same parameters in the SLD the following error is reported: 'Invalid HTTP connect data'.
    Any help is appreciated,
    Jack

    Hi Pascal,
    I did that, now when I run dtr.bat I receive this message:
    dtr is DTR's client tool for the command line.
    It can be used in 2 modes
    - As a simple command line client
    - As a shell
    The shell can be started using dtrshell
    In both these modes the user will require to logon through a popup unless the co
    mmands being used do not connect to the DTR server(Exa: help command).
    If it is required that the login popup does not appear then one of the following
    should be true.
    1. The vfs config folder should have a user.xml file.
    2. The username & password should be specified using the following commandline o
    ptions:
        a. --username/-un <username>
        b. --password/-pwd <pwd>
    Note that if only the user name is specified as commandline argument even then t
    he user will be asked for the password via a popup.
    using the -def option the client to be used can be specified
    Once in the shell all commands can be used without using dtr before them
    Try:
    dtr help simple         list most common commands
    dtr help commands       list all commands
    dtr help command        help on a specific command
    dtr help usage          generic command line arguments
    dtr help configure      lists properties to cinfigure commands/options
    Commandline client Version : 1.60
    And When I run dtrshell.bat I receive login screen and when I enter valid credentials I receive this exception:
    >Initializing...
    >This may take a few seconds. Please wait...
    >Connecting to client ""
    Exception in thread "main" java.lang.IllegalStateException: The client specified
    is not correct or there is no active client present
            at com.tssap.dtr.client.commandline.Cache.getContext(Cache.java:143)
            at com.tssap.dtr.client.commandline.Cache.initialize(Cache.java:49)
            at com.tssap.dtr.client.commandline.Cache.getCache(Cache.java:63)
            at com.tssap.dtr.client.commandline.DTRShell.main(DTRShell.java:79)

  • Upgraded to new MacBook and now Office activation is declined because of too many users.  How do I delete Office registration for my old computer?

    Help please.  I upgraded to a new macbook and migrated everything.  However, Office will not activate because it says too many copies are active.  How do I delete the activiation for my old laptop?  Thanks.

    Use the Office activation phone number and call the automated activation menu. It will ask you how many installations you have. It will then issue you a new code for your new installation. Make sure your old installation is removed.

Maybe you are looking for