Delete standard queries in SPM
Hi All,
We are on SPM 2.1 SP5. SPM out of the box list the standard queries as the list of datasources on the SPM UI. In my current assignment we dont use any other queries other than Spend Analysis Final and Spend Analysis Detail. We would ideally like to delte all the remaining queries from front end. When I goto Administration --> Analysis Administration --> Application Properties --> Datasources i see delete icon next to each data source. But for some reason there is no action post clicking the delete icon next to standard datasources. Also i could successfully delete "Z" datasources created and added by me.
PS: Datasources above means the Bex queries included in SPM UI as datasources.
- Help Appreciated.
Regards,
Sampat Desai
Hi Sampat,
I think you need the content creator role for this, create a blank ABAP role ZXSA_CONTENT_CREATOR and assign it to yourself in the back end (SU01). Or you can do it in the UI if you have the relevant auths. That should enable you to delete the out of the box data sources. Be careful with this role, you can delete all standard content. Also, SAP say you should only have this role applied for a specific action that explicitly requires it, not general use, so either create a special user for it, or remove it after completing the aforementioned action.
Also would recommend upgrading to the latest SP. SP6 patch 4 as there are some important fixes that were affecting our system.
Hope this helps, let me know if it works
Thanks
Neil
Similar Messages
-
How to delete the queries in BW Production which are no longer existing.
Hi,
How to delete the queries in BW production which are no longer existing in DEV.
1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
2. I tried creating another query in dev with the same technical name and send a transport with deletion
it is not working.
Please advise me on this for any function module or any other method.
Thanks
SuryaHi,
If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
As far as your error is concerned, usually when you can delete a query using the delete option in query designer itself,
Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
Hope this will be expedite.
Thax & regards.
Vaibhave Sharma -
Hello
I would like to delete the "ALL" standard list filter for customers in order to an employee only could see his customers.
In short , I would get the same behavior that If I select "my accounts" or "my accounts team"
How can I do this? Is there another way to do this?
Thanks.Hello Jose,
I do not think deleting standard filter queries is possible.
For Accounts, when you select ALL Accounts filter, any user (If the user has restriction to see his & his team's accounts only), should reflect all accounts which he is the owner of, his team accounts and lastly All account which do not have an owner in it.
If any account in C4C is not assigned an owner, the behavior of the system is that such account would be accessible to everyone immaterial of the access set for the employee.
BR
Ankur -
Deleting standard Function, subroutine, ....
Hi experts,
Can I delete standard Function, subroutine, .... of SAP ECC 6 !? If can, what authorization do I have to ?
In case, I created some function group,function, ... at report painter, or copy from standard program, function, ... and then delete them. At that case, it effect to standard or not !? Thanks a lot for all !!!when you are making a copy of a standard program and deleting the new program created by you, it will not affect the standard program.
But pls do not delete any SAP Defined programs -
Hi Experts,
Please tell me are there any standard queries or Cubes are available for the following reports?
A) ANNUAL ORDER BOOK TARGET
B) ORDER BOOK TARGET TILL THE LAST MONTH
C) ACTUAL ORDER BOOK ACHIEVED TILL LAST MONTH
D) TOTAL U.E.O.B.TILL LAST MONTH
E) ORDER EXPECTED IN THE CURRENT MONTH
F) ORDER LOST DURING THE MONTH
Thanks In advanceHi,
It depends on Requirements.
1. Find out the requirements gathering from the functional team.
2. Gather the reporting layouts as you mentioned list.
3. check any standared objects suitable to your requirement (Mentioned Reports).
4. If any Standard Objects available then
Goto RSA1> Select Metadata repository> Give the Datataget name--> Select Search button.
it will display the network flow. click on Network flow--> you can find the Standard Reports.
5. You can install the standard suitable reports from BI Content.
6. If Standared Objects are not available in BI content, then you have to customize the Objects link Datasource/DSO/CUBEs and Queries which are more relevant to your requirement.
Regards,
Suman -
How to delete standard payment method in use
I am trying to delete some of the standard payment methods from table "V_T042ZL" but wont able to do as its giving error "The payment method still used by some of the company codes."Now i found its used by some of the company codes.So please let me know where its assigned with company codes which needs to be deleted to delete standard payment method.
hi
payment methods which are already existed, if u wanted to use u can use or you can create by going to new entries
payment mehtod is defined with single digit code, the same payment mehod is defaulted with a feataure called ZLSCH
so the payment method is defaulted in 0009 info type
that is enough
in real time scenario, we will create our company code , so there is no such problem
company codes are defined by fi/co -
Hi All,
How to find the standard queries in SAP BI related to specific module like FI. How to install that queries?
If you have SAP FI standard queries, Please let me know.
thanks,
KNHi,
generally I go to the infoproviders which are related to FI module and see the flow.
See this link it gives you the informetion about most important account recivables and payable flow.
http://help.sap.com/saphelp_nw70/helpdata/en/86/9f6f3b2c9b9363e10000000a11402f/frameset.htm
For Asset accounting
http://help.sap.com/saphelp_nw70/helpdata/en/d7/3d6937cd2b8632e10000009b38f8cf/frameset.htm
general Ledger
http://help.sap.com/saphelp_nw70/helpdata/en/d5/53c73cee4fb55be10000000a114084/frameset.htm
You can find in help as well.
To install them you will have to install the whole flow for the queries like cubes,transformation etc.
Drag the cubes and it will drag the necessary objects and then you can install all of them.
chose necessary objects when grouping them.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Thanks
Ajeet -
Standard Queries for CFM module
Hello Experts,
I m implementing the CFM module standard objects. Now i want to know what standard queries are available for CFM.
In business content i can find standard queries for only Analyser.No queries for Transaction Manager are available.
can anyone help me know if some standard queries are available for CFM in Transaction Manager.
thanks in adv.
Bhavna.Attached; sample bridge, routed and one arm mode configs as well as config quickstart for ace 4710
http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html')">http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html -
Hi,
My requirement is only standard queries installation.
can i install particular infoarea ,infocubes and all????in my se09 having only query requests and infoarea shows "NODEISNOTCONNECTED"
Can you suggest me. what is the procedure
Regards,
deviHi Devi
Before answering the question the following are the tweaks that are in mind
Is it the requirement that business wants only the standard content queries related to particular info area..???
If yes and the system is greenfield one(assuming new system)
please follow the below steps...
Choose grouping as only necessary and then collection mode automatically and then flag the objects and install it in back ground.
Just ensure that you have placed the match or copy option it it is not a green field system..
Here is the link for BI content installation procedure [Installing Business Content|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm]
Hope its clear a little..!
Thanks
K M R
***"Make everything as simple as possible, but not simpler." Albert Einstein. ****
devi wrote:
hi Suman,
>
> ok..Install before ,the transfer and update rules are also installed right?but i won't have much idea intosap bw 3.5....
> in this situation what can i do???
>
>
> Regards
> devi -
List of Standard Queries for SD, MM
Hi Experts,
Please provide the links for the list of Standard Queries for SD and MM modules.
Will asign the points surely...
Thanks,
SujeetHi Sujeeth,
Check the follw link for SD
www.help.sap.com/saphelp_nw70/helpdata/en/ce/27920ede2111d2acb70000e829fbfe/content.htm
And for MM
www.informit.com/articles/article.aspx?p=664660&seqNum=2 - 35k
www.help.sap.com/saphelp_nw70/helpdata/EN/d2/cb415f455611d189710000e8322d00/content.htm - 20k -
www.help.sap.com/saphelp_pserv471/helpdata/EN/f9/cc9138e4a0341fe10000009b38f8cf/content.htm - 7k -
Regards,
Vamsi Krishna chandolu. -
Hi experts,
How do we delete standard texts i.e., the texts developed using SO10. My concern is to avoid unnecessary system memory usage / clean up.
Regards,
Vamshi.Hi Vamshi ,
Goto SO10 and type the text-id you want to delete and then click on
Change button. After that select the menu Text-->Delete. It will delete
the Text ID
or you can delete through SE78
Regards
Yogendra Bhaskar -
How to delete standard project definition
now in the product system.
As for some problem, there are some false standard project definition.
how to delete standard project definition.
Please explain me all the steps to be required.
Thanks in advance!Go to Edit > Object > Delete.
-
How to delete standard business partner role in CRM
Hi,
on CRM in the business partner relationships we got some relations marked as 'standard'.
If we delete such a relationship in the mobile client the bdoc will be rejected during ConnTrans and the changes will be set back on the mobile client.
If we delete such a relationship in the R/3 backend the deletion will be rejected by CRM but the change is not being set back in R/3, hence we get inconsistencies.
We need to delete standard business relations initiated by R/3 and from the mobile client. Can this be set in customizing or otherwise?
Best regards.Hi Wiliam,
Maybe notes 497146 and 914470 can help you. These will solve that deletions from R/3 are correctly reflected in Mobile. I don't know if it solves also the other way around as we don't use this functionality.
Best regards,
Boris -
Activating standard queries from BI content
Hi Guys,
Can u give me the step by step process to activate standard queries from the BI content with all its related objects.
Thanks in advance...Hi,
To install Query:
RSA1->Business Content->first choose 'Collection Mode' Start Manual Collection.
Click 'Source System Assignment' button and tick R/3 source system or other source system related (Normally this setup will be done if someone already installed business contents before).
Then left window choose 'Object Type' -> middle window choose 'Query Elements->Query' and double click 'Select Object' -> find the Query you want to install, and click 'Transfer'.
Query will be transferred to right window, click Grouping and choose option 'Only Necessary Objects',
After objects collection is done, click 'Install'-> Install (you can do simulation here, check the help for details).
Thanks & Regards,
SD -
Hi All,
I have gone to the Stats cube and have identified over 900 old queries that have not been accessed/run since 1999, 2000, 2001. Several of them are from cubes that we do not even use anymore. Instead of deleting them individually, which is extremely time consuming, is there a program that I can run where I can input the names of all the queries I was erased and it will carry the job out of deleting old queries?
Regards,
PashangYou can use transaction RSZDELETE.
Regards
Maybe you are looking for
-
This is really frustrating - Over the last year I have been uploading all of my photos and occasional iPhone video to Aperture 3 (latest version all patches in place). Aperture would recognize the video, create a thumbnale and otherwise treat it n
-
Typical problems with Data in MS Excel 2003
Hi, I am uploading more than 21,000 records of Data to Business Partner table from xls file. Earlier I was doing it with ease, now the Data is being imported to the repository. I am using the same map at the time of import. It also has remote key map
-
MOVED: No post, no video on P55a Fuzion
This topic has been moved to Intel Core-iX boards. https://forum-en.msi.com/index.php?topic=146656.0
-
Installing Essbase 11.1.1.2 Excel Add In - Help needes as getting error
Hi, I have done these steps: 1 - Unzipped the V15966-01 file into install directory. 2 - Unzipped the V16855-01 file into the install directory. 3 - Unzipped the V15981-01 file into the install directory. When I goto run the install and I get to the
-
Instantiating a nested class from JNI
Im able to instantiate my public member class "Inner" as long as the constructor does not take any arguments. If it requires arguments in the constructor, I get a crash report. I need to be able to instantiate the object with supplied initial argumen