Delete Storage Bins

Hi,
While configuring an SAP EWM Add-On, I had mistakenly deleted storage bins via the transaction /scwm/ls11.
Now whenever I try to recreate the bins I get an ABAP error.
I realized that the storag bins got deleted from the table /SCWM/LAGP , but the same were not deleted from the table /SCWM/HUHDR
So everytime I try to recreate the storage bins, the system throws up an error saying that the entry already exists in table /SCWM/HUHDR.
Please Help.
I'm in a soup here.
Regards,
Oritra

Hi,
The data corruption would be causing this issue. I tried to replicate the same, but, It is not happening for me. Can you share Data Browser screen shot of a single bin. that helps me to understand bit more deeper.
As a alternative solution, If you could able to delete the record in /SCWM/HUHDR table with the help of ABAPer, then you will be able to create the bins again.
Before getting delete the records from here, Cross verify whether the HU exists in the system or not. If the HU Exists with zero stock, then only delete.
you can delete the HU from Warehouse Monitor Screen.
Regards,
Sathish

Similar Messages

  • How to delete the Bins

    Hi...
    How to delete the bins and Is there any prerequisites to delete the bins..
    Thanks & Regards
    Aravind

    Please make sure that all storage bins should be empty  (which you want to delete)
    There are three ways to delete storage bins
    Delete Individual LS02N
    Mass- LS11 or LS10
    Process to delete storage bin with LS10 -
    select storage bins with reference to storage bin structure - Go to environment- create bins- select storage bins - delete online and confirm
    Hope it will help you
    Regards,

  • How to clear stock from storage bin and delete bins?

    Hi All
    For the development of prototype we have made some dummy warehouse structure and made stock movements with dummy bins. Now we wanted to go for real implementation. Before we made actual configurations, we wanted clear all dummy data. Can anyone suggest the standard process for clearing the stock, storage bins?
    Thanks
    Sasidhar Gupta

    Hi Sasidhar.
    is it non production system.
    If yes you can move all this stock in some other storage type as dummy with dummy name.
    and you can use all built as actuals.
    or do PI and remove all stock from system as not actual stock .
    and if its non production system then why are u worrying about all this. Let it be and start building your system as you require.
    Regards
    Suraj

  • How to Unblock a Storage Bin With an Inventory Active Flag

    Hi,
    I have a storage bin that shows as being blocked by an Inventory active flag, but the inventory document has been canceled. I can't even view this document since it was canceled. Anyone have any suggestions?
    Thanks,
    Das.

    Hi,
    You should be able to click on the bin master data (click on bin # and go to inventory tab) and take the recent inventory doc # then go to li02 and delete the inv. doc. That will solve your problem.
    You could also try LX22: Edit > Deactivate.
    Reward points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • Blocking Storage Bin

    Hi experts,
    I have question about following situation.
    I storage goods in more than one storage bin. My storage strategy find storage bin automaticly. If the first storage bin full, strategy find second storage bin. I want that, system block the first storage bin automaticly till the first storage bin will be empty. System doesnt allow add new goods that quant.
    how can i do that?
    Thank your support.

    Hi Manish,
    I explain what i need with example;
    I have 2 storage bin for my material. All this bin's capacity is 5 pcs. Now first good issue with PO about 5 pcs. this material putaway first bin. then other good issue 3 pcs. This material putaway 2nd bin. Then i remove material 3 pcs in 1st bin. As a result, i have 2 pcs material 1st bin and 3 pcs material seceond bin. My capacity is 3 pcs 1st bin and 2pcs 2nd bin.
    Now, if there is good issue same material, system doesn't allow putaway this materials to 1st bin. System block this 1st bin automaticlly. This block is automatically deleted after the last storage unit has been removed from stock (picked from the row).
    By the way, am i need batch management to implement this strategy for this material?
    Thanks for advice..

  • Creating dynamic storage bins

    When you define a movement type, you can set up the system to create dynamic storage bins in the assigned interim storage area. In this case, the system uses the document number which triggered the stock movement as the coordinates for the interim storage bin.
    For example, for a goods receipt, you can set up the system to use the purchase order number as the storage bin coordinates in the interim storage area for goods receipts.
    These coordinates only exist as long as the quant is in the interim storage bin; afterwards, they are deleted.
    Where do I do the config for the above scenario..
    I tried creating bins for interim storage typees in LX20....after creating an interim storage area through referencing standard ones in IMG... I cant understand how the system creates dynamic bins for the movement type. Please help

    LX20 is for static bins.
    The dynamic ones are created automatically by the system when the stock is moved to the area. 
    In the movement type configuration in the WM:
    (LE -> WM -> Activities -> Define movement types)
    Select your movement type and warehouse and make sure the SCR box is checked
    Also check that the field is mapped correctly for the dynamic bin in
    LE-> WM -> Activities -> Define Requirements
    Field Name is what is grabbed

  • Send Storage Bins to external system (change pointer, change document, ...)

    Hello,
    I need to send to my external system the storage bin modifications, namely, insert and delete information.
    I haven't found any User Exits ou BADIs to the LS01 transaction.
    I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
    Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
    What are the options that I have to do this?
    Thanks in advance,
    Rui

    Hello Rui,
    perhaps you can use DBTABLOG (Think about data volume and performance).
    http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
    Best Regards, Dirk

  • How to block storage bin transfer

    Dear experts,
    I have an issue. Fo example, a material is already been flagged for deletion. All transfer from plant level up to storage location is already blocked. But I can still do bin transfer using LT01. Can we block LT01 as well?
    Please advise.
    Best Regards,
    Hasniza

    Hi
    In that case if the storage bin is getting blocked then it will affect the postings of other materials , so better to go with material level
    Do one cycle in your development/quality server and ensure that it is working fine as per the clients requirement, take care of other exceptional scenarios also if any.
    Regards
    Amuthan M

  • Report for Material - Storage Location - Storage Bin

    All SAP Gurus,
    Is there any standard report available in which we can find out the storage bins for list of materials?
    (We have not implimented Warehouse MAnagement)
    Regards,

    HI,
    You need to have Warehouse management in place in order to view the storage bins for materials,
    MMBE of MM cannot give you the idea of storage bins.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful.

  • Storage bin Capacity utilization is greater than 100%

    Hi,
    Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
    Kindly please advise.
    Thanks

    For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

  • Not Printing the source storage bin in the layout

    Hi Gurus
    As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
    Please help me,
    Thanks in advance,

    sorted out by setting the SPAD - Device types
    format, just added the zxxx format to this and now it is working

  • T.code for viewing stock at storage bin

    Hi all,
    What is the t. code used for viewing the stock at storge bin?I know this is WM question but your help is appreciated.
    Regards,
    Shailendra

    Hi,
    Following are the T-Codes:
    LS26   Warehouse stocks per material
    LI05    Inventory History for Storage Bin
    LX02   Stock List
    LX03   Bin Status Report
    MB52  List fo warehouse stocks on hand
    Regards,
    Suresh' D.

  • Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

    Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
    There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
    The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001  904  1110500002  does not exist (Check your entry)"
    This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
    I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
    Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
    Please advise on how this process should happen.
    Regards.

    Hi TQ,
    Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
    Can you elaborate more in detail how you solved your error few months ago?
    Thanks and regards

  • Creation of New storage bins for storage type 007 in Production

    Hi Gurus,
    Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
    thx
    r

    Hello,
    As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
    The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
    Regards,
    Prashant

  • Inspection lot creation on storage bin

    Hello all,
    I am wanting to learn how to create an inpection lot of stock within a storage bin.
    I ask because we have many storage bins in our warehouse location storing the same material.
    If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
    In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
    I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
    I want the bin location to stay in the same storage location but be flagged for quality inspection.
    Thanks,
    Chris
    Edited by: gmanwizo on May 7, 2011 5:58 AM

    Hi,
    It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

Maybe you are looking for