Delete the data sources replicated worngly in BI 7.0 boxes

Hi
what are the steps to delete the data sources replicated worngly in BI 7.0 boxes
Thanks,
Sai

Hi Sasi,
Goto RSA1, select data dsources. Then right click on particular DS and select delete.
Hope this helps.
Regards
Konda Reddy

Similar Messages

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Data source Replica

Hi Gurus,
How to collect Data source Replica in a trasport request
iand what is 'Data source Replica'
how i can see the 'Data source Replica' under a transport request
Please ...........
Thank you

Hi,
When you activate the data source on the r/3 side, you end up capturing it in a transport request.
However on the BW side you go on and replicate the activated data source. On most times you are not prompted to enter the transport request when you replicate the data source. However if prompted, capture the data source where you capture the transfer rules. You will not find anything like data source replica under that request, but you will find data source and your data source will be under it.
hope this helps.
thanks,
rahul

Error while Replicating the Data Source in Quality System....

Dear Expert,
I have created a generic data source in R/3 Dev system and I replicated the data source to BW DEV system. Everything is fine in DEV system.
I have transported the Data Source to R/3 Quality System. And transported the related objects in BW DEV system to BW QUALITY system.
Now I am getting the error as follows :
BW QUA System --> RSA1 --> Source System --> Data source Overview --> Sales & Distribution --> _REPLICATE_
*DATASOURCE*.( clicked )
Its moving to another screen (R/3 QUALITY) , but it is coming as a LOGIN screen. Its askong for the USER name and Password. And when I click on BACK button , its givin following pop-up
RFC connection to source system LOGSYS is damaged ==> no Metadata upload
What could be the issue ?? Please suggest.
Thanks,
Sanjana

Hi saveen,
Yes I transported in that manner.
I checked in Source System ( RSA13):
Its giveng the pop-up ,
RFC connection check failed. Check connection
Please suggest, how can I proceed ?
Thanks,
Sanjana

Replicating the data source

Hi,
I have an attribute data source and when I have replicated the data source again from the source system, the type has changed from attribute to hierarchy.
Can you please tell me how can this happen and what needs to be done to revert it back to attribute data source.
Regards,
Harikiran Gunnala

Hi Hari,
it cannot change automatically like hierarchy........See for....another...data source,which data source ended with _ATTR......................
Hope it helps
Regards
chandra sekhar

Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

Friends,
I have situation :
Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
when for the above ods and the data source when trying to delete the request whole data got delted.
All the data got deleted in the fore ground. no background job has been generated for this.
I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
Many Thanks
VSM

Hi,
I suppose you want to know the possibilitiy of getting the data.
If the entire data is being deleted, you can reload the data from source system.
Load the setup table for your application. Then carry out init request.
Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
Once this is done, delta queues will again start filling up.

Unable to collect 3.x data source replica in a request

Hi,
When i tried to collect a data source replica(3.x data source) in a request it is throwing an error.
But when i tried to collect a data source replica which is migrated to 7.0 it is aloowing me to do.
Please suggest me a solution.I want some datasources as 3.x only.

Hello,
Goto Transaction RSDS and delete the replicated BI7.0 datasource and choose BW3.x datasource while replicating.
Restoring 3.x DataSources
1. In the maintenance screen of the DataSource (transaction RSDS) in the original system (development system), choose DataSource ® Restore 3.x DataSource.
2. Enter a transport request.
3.If required, delete the dependent transformation (R3TR TRFN) and data transfer process (R3TR DTPA) objects.
4.Transport the restored 3.x DataSource (R3TR ISFS), along with its dependent objects, into the target system.
Emulation, Migration, and Restoring DataSources
Thanks
Chandran

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
The field GAMNG is available in the communication structure maintainace.
The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase 002 ***********************************************************
Message no. D0322 ..
We deleted Setup table , Meins field already exist in comm str.
1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
Kindly suggest correct answer.
Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

Hi,
There could be a number of reasons why you are getting the error:
1. Fields are not assigned to datatypes.
- Check structure in SE11 and assign to datatypes.
2. There are inactive appends in the extract structure.
- Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
3. The appended structure is in a different development class from the one of the structure it is being appended to.
Please review and apply the following notes carefully :
766603 Activation problems with extract structures
623411 LBWE: Gener. terminates with D0 322 (end phase 002)
757923 LBWE: Generation terminates with D0 322 (end phase
600708 D0 322: End phase 002
It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
Check to see if this is the same on your system.
Rgds,
Colum

Data in PSA content is different than the data source

Dear Experts,
I am using Process chain to update info cube from data source of a z table. In the process chain, the PSA request request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
But after executing the process chain, the info cube is not updated with the required data source. It is updated with data from some other data source which is belonging to a different custom table.
I have checked the Extraction of the data source in RSA3. This is extracting from correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the PSA content data is different from the data source.
I am totally confused, how this is possible. Can anybody advise me to troubleshoot and fix this issue.
Thanks and regards
Murugesan

Dear Igor,
The PSA request is being deleted in a previous step prior to loading the info package. I can see every time when I run the process chain, the old request number is deleted and a new request number is created.
Still the same issue is persisting.
I also observed one more thing that the second time when we repeat the same process chain, the correct data source data is loaded in the info cube and PSA table. Only during the first time, the PSA table and Info cube it is not updating with the right data.
thanks and regards
Murugesan

How to delete XML Dat Source from BW System

Hello All,
How can i delete SOAP XML data source(6A *) from BW System.
Do I need to delte the generated RFC function module for the data source ??
Cheers
POPS

Hi Sumit Kalyan
Since your are using process order, I would like to know whether you are using process management function or not.
(Especially your are following GMP scenario ? This guide line is basically used pharmaceutical industry.
If you work with GMP scenario, before your are archiving your process order, you need to create electronic batch creation and archiving.
Then you can archive your process order and delete it completely from your system.
You can check whether your are using GMP scenario or not in your process order type.
(T-CD COR4).
If you are not. All you need to do is set deletion flag and deletion indicator to your process order and then archive your process order (you can use program PRARCHP1) by using archiving object PR_ORDER (you can call this object from t-cd sara or COAC).
I hope this information help you.
best regards
Keiji

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
        zzdate LIKE sy-datum,
        zzbuper LIKE t009b-poper,
        zzbdatj LIKE t009b-bdatj,
        zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
       fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date               = zzdate
*             I_MONMIT             = 00
      i_periv              = 'V3'
           IMPORTING
     e_buper              = zzbuper
     e_gjahr              = zzbdatj.
*           EXCEPTIONS
*             INPUT_FALSE          = 1
*             T009_NOTFOUND        = 2
*             T009B_NOTFOUND       = 3
*             OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

How to delete the data in a table using function

hi all,
i need to delete the data in a table using four parameters in a function,
the parameters are passed through shell script.
How to write the function
Thanks

>
But the only thing is that such function cannot be used in SQL.
>
Perhaps you weren't including the use of autonomous transactions?
CREATE OR REPLACE FUNCTION remove_emp (employee_id NUMBER) RETURN NUMBER AS
PRAGMA AUTONOMOUS_TRANSACTION;
tot_emps NUMBER;
BEGIN
SELECT COUNT(*) INTO TOT_EMPS FROM EMP3;
DELETE FROM emp3
WHERE empno = employee_id;
COMMIT;
tot_emps := tot_emps - 1;
RETURN TOT_EMPS;
END;
SQL> SELECT REMOVE_EMP(7499) FROM DUAL;
REMOVE_EMP(7499)
              12
SQL> SELECT REMOVE_EMP(7521) FROM DUAL;
REMOVE_EMP(7521)
              11
SQL> SELECT REMOVE_EMP(7566) FROM DUAL;
REMOVE_EMP(7566)
              10
SQL>

Refreshing the Data Source View in Analysis Services

I have added columns to the SQL Database table that is used as a dimension in an Analysis Services Cube. The new columns will be used as additional Property Fields for the dimension. When I attempted to refresh the Data Source view so that the additional columns are present, I am given the following error:
System.Data
Property not accessible because 'Parent Columns and Child Columns don't have type-matching columns'
I have done nothing to the columns used for the parent of child and the error message provides nothing to gon on. Does anyone have any ideas on this?
Gary

Olga,
Thanks for your response. I will try and answer your questions
1) I have not tried removing the columns yet. I will try that this afternoon but have limited hope. The two columns I added are simple text columns that will be used as attributes in the dimension. I have made no change to the parent or child columns.
2) The table I modified is the source table for a parent-child dimension.
3) The reference to the "check list" does not take me to any kind of check list.
4) The parent-child dimensions I am trying to modify have been in use for months and the parent and child columns do have the dame data types.
5) I have also check the data types between the dimension table and the fact table. they use the same data types (small int).
6) I have not made a collection for the parent key, it is a single column. The remainder of your last paragraph is not clear to me. Can you give me an example.
I am fairly inexperienced with Analysis Services, please talk slow and use small words :-)
Thanks again for your help!
Gary

Delete the data sources replicated worngly in BI 7.0 boxes

Similar Messages

Maybe you are looking for