Delete the delta request

Hi BW Experts,
I have a doubt, please make clear it.
Daily delta, first it goes to ODS and then it is updated to further data target i.e, Infocube.
Suppose today (22-09-2007) delta has been running successful in ODS as well as Infocube.
If i delete the 15-09-2007 Request (Which is Delta Request only) from both ODS and Infocube, what will happen?
Is there any problem in ODS and Infocube?
Please give me the reply.
And my Second Question is:
What is the main purpose of DB Statistics.
Thanks in advance.
Regards,
Anjali

hi,
if suppose u r deleting the particular delta request from ods and cube means
data update through that request no will be deleted from both cube and ods.
DB Statistics. it's mainly for OLAP run time analysis, query run time analysis
if helpful provide points
regards
harikrishna.N

Similar Messages

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the delta queue in the ECC

Hi everyone!
After I tryed to save a new Infopackage and I have the error :
(Deltas already loaded for request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG init. selection; no 2. init
Message no. RSM1071
Diagnosis
Deltas have already been loaded for the init. selection of request REQU_41Q82WJLR9AZCE9ZMKQLVG3RG. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
As the error says - Deltas have already been loaded for the init. selection.
Can you please give me some links/guids which describes how to delete the delta queue in the source system, and restart the delta process.
thank you, Ron

Hi,
Assuming as you need to the reinit for same selections.
in such case you need to delete old init.
how to delete init:
Go to your info pack screen, menu Scheduler--> initialization options for source system--> here you can see the existing init, select init(green) and delete it.
Later you can trigger your init info pack with selections.
Thanks

DELETE A DELTA REQUEST THAT WAS COMPRESSED !!

Dear Experts,
I've some inconsistent data that i'm trying to address.
So, I've delted a few requests out of ODS_1 >> which sends delta's to CUBE_1.
After that I went to manage for CUBE_1 and deleted couple of those common requests from CUBE_1.
Except one request XXXXXX for 11/1/05. When i'm trying to delte this request it says "This request has been aggregated, compressed or Scheduled".
It said the same thing for the few of the previous req's that i deleted. But after few minutes, it allowed me to delete them successfully.
This request is adamantly not going any further. So, I went ahead to the RSMO and changed the status from green to red on the STATUS tab. But it's still not letting me delete it.
I'm concerned that about two things:
1. how do i delete this delta request XXXXXX.
2. If resend the data from datastage to ODS_1 from 11/1 to date, it'll then send delta's to CUBE_1.
But the CUBE_1 already has this request XXXXXX for 11/1/05, it would create duplicate records. What would i do at that point.
Please guide me thru this.
Thank you,
Ti
Message was edited by: TI

You need to check to see if the Request you are trying to delete has been compressed in the base cube. Once a Request is compressed in the base cube, you can not delete it.
As Dinesh, mentions, the cause could also be that you have an agrregate that is set to automatically compress after the rollup, and you can not delete Requests from an aggregate that has been compressed either. Now if the Request has NOT been compressed in the base cube, and the problem is just due to the aggregate, then you can deactivate the aggregate, whihc should allow you to then delete the Request from the base cube.
If the request has been compressed in the base cube, I think you really have only a couple of options -
Reload the cube - might be the easiest if the cube is not to big.
Selective Deletion might work if you can identify criteria that would only point to the data that had been loaded in that Request. Possible, but not likely - depends on the cube design and data.
If you still have the data in the PSA you use that to create a flat file that you would reverse all the key figure signs and then load that to the cube from a flat file data source you define to offset the data from the Request that you can not backout. Another variation would be to try to generate a similar reversing flat file from the source ODS. The PSA is probably a better approach if you have the data still there.
So ...
The first thing is to identify why you can not delete th Request - due to is compression in the base cube or compression in an aggregate.
This is why you shouldn't compress Requests in the base cube until you have verfied the data.

Unable to delete the DTP request.

Hi friends, iam unable to delete the DTP request, its showing in yellow mode, iam unable to change it to green or red, i checked in SM50 and SM51 ...is there any other way to delte the request ....any FM .
My version is 7.0 and SP16 BI_Content 9.
Thanks in advance,

Hi,
Try this.
RSBKDATAPAKID DTP: Status Table for Data Packages.
Check this table if you can change the status to red.
If yes - than delete all the requests from manage screen.
Also check table RSBKREQUEST DTP to delete Request if possible.
Hope this helps.
Thanks,
JituK

Can i delete the Previous request and create the new request for loading

Dear Experts,
I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
Here my question is the first day load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
Please guide me .
Regards,
Srinivasan.

Hi Srinivasan,
I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
Hope it helps!
Regards,
Pavan

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) <b>with return Code 12</b>. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

Deleting the latest request from info cube.

Hi All,
In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
Thanks.

Hello Vincent,
As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
Hope this resolves your issue. Below document explains steps to achieve the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
Best Regards,
Venu Gopal K

Short Dump Error in deleting the Init request

Hi Gurus,
i am loading master data from sap r3 by init update.
now due to some requirement i have to delete the init request , but when i try to delete the request
it goes to short dump and gives the error message as
Runtime Errors         MESSAGE_TYPE_X
Date and Time          01/05/2009 01:54:15
Short text
     The current application triggered a termination with a short du
What happened?
     The current application program detected a situation which real
     should not occur. Therefore, a termination with a short dump wa
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Error when opening an RFC connection
     Long text of error message:
     Technical information about the message:
     Message class....... "RSAR"
     Number.............. 051
     Variable 1.......... "Error when opening an RFC connection"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
     Last error logged in SAP kernel
     Component............ "SAP-Gateway"
     Place................ "SAP-Gateway on host sapdev / sapgw00"
     Version.............. 2
     Error code........... 631
     Error text........... "max no of gateways exceeded (100)"
     Description.......... " "
     System call.......... " "
     Module............... "gwxxrd.c"
     Line................. 8438
     The error reported by the operating system is:
     Error number..... " "
     Error text....... " "
Trigger Location of Runtime Error
    Program                                 SAPLRSSM
    Include                                 LRSSMF03
    Row                                     1,627
    Module type                             (FORM)
    Module Name                             DEL_SOURCE_SYSTEM_INIT
1624           communication_failure = 1 message l_msg_text
1625           system_failure        = 2 message l_msg_text.
1626       if sy-subrc <> 0.
>>>>>         message x051(rsar) with l_msg_text(50) l_msg_text+50(50) '' ''.
1628       endif.
Please help me on this as untill it will not be deleted, I will be unable to load the data.
suitable answer will get Full points.
Thanks.

Hi Saurabh,
PLEase go through these notes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383837393039%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383934313030%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393738303738%7d

Unable to delete the last request in full load infopackage

Hi All,
I have full load infopackage with many requests with green status and thier request genetaed is 0.
Because of last failure request ia m aunable to activate dso.
i Made last failure request green and triggered. but not successful.
i made it red and tried deleting, no sucess. when i delete its giving Dump
Now i am unable to delete the first request in green status also.its not deleting.
can i delete whole data in dso and do full load again? how to check if there any other infopackages on this dso..
ALL This issues camw across triggering process chian...plz let me know oyur answers....
Thanks,
Venkat

Hi Venkatesh,
I tried deleting through RSODSACTREQ.. but the delete option was disabled in the TABLE ENTRY TAB.
The last request is failed one with red and not tranfered with full records..
All the other records which are in green status does not have symbol genated for reporting purpose and
Request id generated up on activation is zero..
I tried deleting the first request.. when i change its satus to red...
QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
The M version is then activated if necessary Now?
Req. 0001439786 in DataStore Z[DSONAME]must have QM
status green before it is activated
Request 0001427251 is not completely activated.
Please activate it again.
But i am unable to find both the requests under psa and in adminstartion data target tab... there are some other requests with red status iin psa...
When i try to delete failed request its giving dump
Thanks,
Venkat.

Can we able to delete the particular request

HI,
We have code for to deleting all request from Database.
Can we able to delete the particular request from the Database.
For example, I have request start from 100 to 150.
If i want to delete the request : 125, is any way we can pull all requests in the dropdown and delete the particular request.
Pls any one give a suggestion, how can we archive this?
Regards,
Anandh P

Hi Anandh,
Kevin is right you can use the workspace and use a grab (and then abort) to "delete" the instance.
It will no longer be running and will be viewed as aborted.
You can create a custom UI by using the PAPI or PAPI-WS depending on you preferences.
However if I'm not mistaken there is a third option that is the deletion of instances from the database.
I believe there is a PL/SQL procedure that can be run to delete all instances from the database. However this isn't limited to a single instances..
---( Can someone confirm this.. I'm not sure if this is for BPM or just for SOA Suite?) ---
Hope this helps.
Kind Regards,
Nils

To delete the transport request.

when i'm trying to delete the transport request by using se09, it responses with " Request/task BWDK916118 cannot be deleted because it contains locked objects." That request is created by me. It showing same name but it will not allow me to delete. Please help to delete how to delete that request.
Thanks
Satish

Hi..
Basically you are getting this messge because first you have to delete all the objects of the underlying sub requests and then the subrequests ......then finally the actual request.................
Secondly, it is better to unlock all the objects first so that you can delete all the objects at a time..............because if you have to delete all the objects one by one.....and if each requests contains 100s objects then it is very tedious to delete all the objects one by one...
Go to SE03 --> There you will get the options "Unlock Objects (Expert Tool) " --> Click over there --> give the subrequest nos and unlock it....
Then go to SE01 --> Click on "Objects" tab --> You will get the change button --> click on it --> Select All and Delete at a time...
Regards,
Debjani..

Delete the delta request

Similar Messages

Maybe you are looking for