Delete the initialization of delta on open hub table

HI Gurus
I have loaded data from cube to open hub table using DTP with full update, later on i have loaded the data using a DTP with delta update. Now i am thinking that delta has been initialized on the open hub table, so now want to delete the initialization of delta on the open hub table. It would be great if some one could send me the response. 
Thanks
Rohit

Hi Sam,
If I understand you correctly,
You have removed your Initialisation by going InfoPackage --> Scheduler --> Initialization Options for Source --> Removed the Request
Then you did Init without Data Transfer
Then you have the option from init withoout Data transfer to Delta in InfoPackage and Loaded the Data.
Check in the Process Chain the InfoPackage you have mentioned in the selections may pointing towards Init load instead of Delta.
Sudhakar.

Similar Messages

  • Cannot see an open hub table as an external data in data services

    Basically an open hub has been built in SAP BW. I have configured a datastore to acess it ( connection ok ) however I am not able to see it in the external data  window ( Data Services)...has anybody a list of reason why  the open hub tables are not visible in data services
    Thanks

    Hi,
    Please refer below link.
    http://help.sap.com/saphelp_nw70/helpdata/en/43/7a69d9f3897103e10000000a1553f7/frameset.htm
    Below link gives you common issues with open hubs.
    http://wiki.sdn.sap.com/wiki/display/BI/CommonIssueswithOpenHub
    Regards,
    Pravin

  • Open Hub table descriptions

    Hi Gurus,
    Please let me know in which table are the Open Hub table descriptions stored?
    Also let me know if there is any function module that gives the description of Open Hub tables when we pass Open Hub Technical name?
    Regards,
    G.Srinivasan

    hi,
    you can check the below doc it has all the tables relate to open hub destination
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-ohs%20open%20hub%20service%2c%20third-party%20integration.pdf
    the blow thread is relate to the same question you have asked
    Re: How to Change OpenHub Destination
    hope this helps.
    regards,
    Mahesh

  • Open hub Table deletions

    Hi all,
    I  am using an open hub and out put as DB .   for delta load form DSO in open hub level i selected technical key so it will maintain the entire history of delta changes but for performance reason i should delete the DB after some time  .
    note:
    I don't want to select the option deletion data from the table
    Thanks and regards
    uday

    HI,
    Deleteing Data in Tables depends on your requirements, generally there are options i.e. Append or Overwrite data, or Delete.
    For reference keep data in Tables after some time/days/weeks you can delete the data in tables using some ABAP code. So you write simple code to delete the data in that Table and execute that program whenever you want to delete the Data in Tables.
    For, some references see in below url in Open Hub Destination section
    http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
    Thanks
    Reddy

  • How to delete the Initialization records in  2LIS_03_BX

    BW3.5 - R/3 4.6c - LO-Cockpit - SCM Implementation - Inventory Management 0IC_C04 InfoCube.
    I wanted to use 2LIS_03_BX and RSA3 was showing zero records. I ran MCNB to collect records for this extract and it collected 815000 stock records. When I checked the extractor, I realized that the zero quantity records were not exactly what I was expecting for. I was looking for zero quantity records for valid/active bins. But it seems that we are receiving 100's of zero quantity record for every material that we don't really care for anylonger. I definitely want to see the zero quantities in case the bin is active but we've just run out of material.
    I turned off the zero quantity collection in MCNB but at the end of run, it only over writen the 815000 records rather than deleting them all and collecting about 70,000 entries as expected.
    My question is how can we delete the results of a previous initialization of open stock transfer structure (trans# MCNB)so I can run it again?
    I'll appreciate any hints or comments.
    Thanks a lot.
    Bilal

    Hi,
    I assume using OLIX, we will be able to delete the data from either 2LIS_03_BX or 2LIS_03_BF. As opposed to using LBWG, where if we select '03' the data is cleared off from the set up tables of both datasources.
    If that is true, could you please mention the 'Info structure' to be used in OLIX for 2LIS_03_BX and 2LIS_03_BF?
    Thanks a lot.
    Regards,
    Sri.

  • What's the difference between Infospokes and Open Hub Destination in BI 7?

    I understand the API that a 3rd party tool uses to get data our of BW using infospokes.    Is it the same API that a 3rd party tools such as MS-SSIS uses?   Supposedly  that software only communicates with an OH Destination and not Infospokes.   So apparently is does use a different API.   If that's the case, where can I find documentation on that API for OH Destintations?

    Open Hub Destination (OHD) replaced InfoSpokes as of BI 7 SPS 6, for Open Hub Service. Existing InfoSpokes can be used still, but it's recommended that any new retractions be created as an Open Hub Desitnation, because it exposes more functionality (e.g. Transformations and functionalities with DTPs).
    Here's a document on [Open Hub Service - 3rd Party Integration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/com.sap.km.cm.docs/library/icc/bw-ohs%20open%20hub%20service%2c%20third-party%20integration.pdf] (see Page 7). Hope this helps.
    Edited by: Dennis Scoville on Aug 3, 2009 1:45 PM

  • How to delete the data from SAP R/3 DB table from BW

    Hi,
       I am facing an issue... I have populated the data into custom r/3 DB table by running a user exit.I am getting the data and loading(Full Load) it in BW ODS. But my problem is when i rerun the user exit it is giving me a short dump saying "SAPSQL_ARRAY_INSERT_DUPREC". when i delete the enteries of DB table it is working fine. But this fine in development.but i production i cannot do this.So i want to delete the DB table enteries by an ABAP program and call this ABAP program using Process chain when my ODS data LOAD is successful. How to go About this.
    P.S: I want only to delete the DB table enteries not the DB table.....
    Thanks and Regards
    Sairam phani

    Sairam,
    why don't you just add the code for deletion of records into that user exit, so it would first delete entries and then write new ones.
    Alternatively, you could use a Process Chain to trigger an event in R/3, and by that event a scheduled job would run, deleting entries from that table.
    As I don't know details of the solution you're implementing, that's all I can think of now.
    Cheers,
    /RB

  • How to delete the data in P,Q and S table

    Hi All,
    I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
    When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
    Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
    Points will be awarded.
    Thanks
    Sathiya

    Program RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data.   You should be able to search OSS notes on te pgm to get a little more info on it.
    It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders.  This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data.

  • I can't delete the icons of most recently opened apps. Won't wiggle when I tap and hold down the home button.

    Why can't I delete my most recently opened apps?  Before IOS7 I could get them to wiggle then close them.

    Double tap the home button and swipe upwards on the preview of the App (not the App Icon).

  • Delta data in open hub table

    Hi All,
    Can we store delta data in infospoke DB table.
    I created a infospoke by exporting the data of cube in DB table. now i want to export the delta data of cube in the same table.
    So  Guru's please let me know is this possible in infospoke to store delta data either in file or table.
    Thanks,
    Ekka

    Hi pradeep
    You can store the delta using Info spokes in files.
    Please go through the below articles
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0d48577-9542-2e10-05a1-d6c1e07ea641?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20d6059d-f32c-2d10-90a4-f3c1009fb9a9?QuickLink=index&overridelayout=true
    and check the below thread
    Extraction mode Delta in Infospoke by using Multiprovider
    Hope this helps
    Regards,
    Venkatesh
    Edited by: Venky1903 on Jul 29, 2011 4:55 PM

  • Update Function Module Required for Deletion/Truncation of Open Hub Table

    Hi All,
    I need to delete/Truncate DB tables i.e. Ztables using Update FM
    can anyone help me with few Update FM.
    Regards,
    NS.

    If you want to Delete Custom DB table then you can use FM RS_DD_DELETE.
    You can delete, if the table is not used anywhere in SAP.
    Close thread if you got a answer
    Kanagaraja L
    Edited by: Kanagaraja  Lokanathan on Mar 16, 2010 9:54 AM

  • I am unable to open I cloud with my apple I'd every time I try message comes that " max no of account have been activated on your I pad"  what needs to be done,how can I delete the accounts which I had opened as I don't remember the I'd and passwords

    Can any one help me on this

    It seems that you've been trying to create Apple IDs (even if you thought you were just trying to use one to make an iCloud account) and you have reached the max allowed number of IDs you can create on the device (which is 4 or 5 as I recall). The only way to create yet another one is to use a different device or a computer. No other way around this.
    If on the other hand you want to USE an existing one, go to Settings>iCloud and enter that ID. 

  • Open hub table target structure

    Hi,
    we have info spoke which sends data to the file.
    Infspoke has unit infoobject in it which is actually  not required in the file. on the other hand we can't remove that unit infoobject from the infospoke as it required by one KF.
    How do I get rid of that unit field from the file.
    BADI?
    If it is BADI is it OK to remove the field in the target structure?
    Can I get some sample code in this case..
    or is there any other way?
    Thanks.

    Hi varun,
      Just cretae the new data target structure simillar to the source structure and in that remove the Unit from the structure.
    Write the following code in the badi..
    *Data Decleration
    data: l_s_data_in type Source Structure
          l_s_data_out type Target Structure
    *clear the output table e_t_data.
    clear e_t_data_out.
    *loop at the source system
    Loop at Internal table from Source
      loop at i_t_data_in into l_s_data_in.
    *insert the record to l_s_data_out..
       move-corresponding l_s_data_in to l_s_data_out.
       insert l_s_data_out into table e_t_data_out.
      endloop.
    endmethod.
    I Hope this is helpful for u..

  • Open hub service - Cube as source system

    Dear gurus,
    i am new to open hub concept.
    i need to transfer values from my query to a custom table in R/3.
    im using bi7.
    Questions:
    1) i guess pen hub is my solution. is it correct?
    2) do i have to transfer values from my cube or can i send values from my query too?
    3) i have created openhub service under modelling tab, i have selected target type as TAB. it says database table /BIC/OHZTABLO.
    is it correct?
    4) then i am trying to create Transformation from open hub ZTABLO to/ BIC/OHZTABLO. ?
    in that case it shows that transformation target is DEST- ZTABLO? i mean open hub service is my destination? then what is the source?i am confused in that point.
    5) Thanks all!

    1) i guess pen hub is my solution. is it correct?
    ->If u want to transfer dat from yr query then APD (analysis Process designer) will be the best bet to go for. Create APD and schedule it in process chain
    2) do i have to transfer values from my cube or can i send values from my query too?
    ->Using OH(open hub) you have to use Cube as a source,,,you cant use query then.
    3) i have created openhub service under modelling tab, i have selected target type as TAB. it says database table /BIC/OHZTABLO.
    ->ya,correct,there are two ways to do that,,,either u send the cube data to a open hub table(as its happening in yr case) or send it to application server/flat file
    is it correct?
    --> yes
    4) then i am trying to create Transformation from open hub ZTABLO to/ BIC/OHZTABLO. ?
    in that case it shows that transformation target is DEST- ZTABLO? i mean open hub service is my destination? then what is the source?i am confused in that point.
    ---> yr source is InfoCube and target is Open hub table /BIC/OHZTABLO
    5) Thanks all!
    Than you.

  • Open Hub Destination Delta issue

    Hi experts,
    We have a scenario in which a Open hUb is created on top of a cube.
    Regular delats are moving from this cube to Open hub daily.
    But as per the request, we had to dump the cube data, and the reload took, 2 days to complete.
    So, that 2 days, data got missed in Open hub.
    Now, as the new request are not datamarted, next time wen the DTP between Cube and Open Hub runs, it will fetch all the requests right. we dont want that.
    So, can we run a init w/o data transfer so that source status will be fetched?
    but then how to load that 2 days data alone.
    Kindly advise.
    Edited by: neethacj on Mar 7, 2012 1:06 PM

    If the cube doesnt have any other targets aprart from this OHD,
    delete the two days requests in the cube, set the init from cube to ohd
    load the cube for delta( brings two days requests) and run the ohd

Maybe you are looking for

  • Repots( closing balance of a vendor)

    hi. i want to show the closing balnace of a vendor. in my report opening balance is coming. but if today i am displaying the report then it should be display the vendor's yesterday  closing balance . means at which date i will display the report the

  • Grey out 'Overall Limit' field in ME23N/ME23

    In ME23N (ME23), the 'Overall Limit' value of (Limit) Purchase Orders within the Limit tab can be amended even though the Purchase Order has been created and released.  Once the Purchase Order has been released the 'Overall Limit' value needs to be l

  • I put the EarPods in, but it can't seem to play music. it was working a few days ago. what happened?

    What happened? My earpods were working fine. Even with other devices. But when I plugged it into the ipod nano 7g, it didnt work. It was fine a few days ago...

  • Move backed up music into new itunes

    I backed up my itunes to an external hard drive when computer crashed, but cant figure out how to move into itunes all at once.  I can only do it one by one.

  • How to configure ALE/IDOC in  nace for V3.

    Hi, Please let me  know how to configure ALE/IDOC output type in Nace and how to configure the message outputs.         I require the steps to configure the above.          Screen shots will also be helpful. Regards,