Delete the space between multiple clips, at once, on the timeline?

Is there a way to delete the space between multiple clips on the timeline with one click?
I trim clips on the timeline, so I can have a couple hundred clips with space between on the timeline. Is there a way to delete all the spaces between the clips at once?
Right now I have to ripple delete the space between each clip, big hassle and a lot of key strokes. Is there a better faster way to trim clips in general? Or delete the spaces on the timeline?

I have not used the source monitor much. Can I use the sourse monitor to make a lot of cuts "clips" out of one big clip? Say I want to take the highlights out of a long wedding ceremony? Or do I need to do this one the timeline. Edit clips on the timeline is very intuitive to me and I can do it fast, except for all the spaces betweent the clips.
Absolutely ( and I wouldnt do it any other way because it is designed for ease and speed)
Try it:
1.Target a Video and Audio track in the timeline
2. Place the long source file in the Source monitor.
3. Locate the first highlight and Set In and Out Points ( KBD Shortcut "I' and "O")
4.Then Insert it to the timeline ( KBD "," )
Note: there are a number of ways of sending the selection to the timeline (eg.Insert / Overlay buttons, drag it to the Program Monitor, drag direct to the timeline). You can also take video only, audio only, both. Darg options have modifier keys for insert / overlay ripple-ing
Back to the source monitor (step 2) and mark next highlight selection....repeat steps...etc.....
Ensure your CTI (playhead) is always at the end of the last clip in the timeline. KBD short cut "End" and you will have no gaps to deal with.

Similar Messages

How do I move multiple clips at once in the project rather than one a time?

I know how to cut and then paste to move one clip within the project to a new place within the project, but how do I move a group all at once rather than one at a time?

This did not help and that did not work. I had already tried that Holding down either the command key does "highlight" multiple items but then you cannot move those items to a new spot.

Space between multiple objects

Is there a way to alter the space between multiple objects without changing the objects themselves? You know, kind of like inflating/deflating a balloon with dots on the surface (yes, the dots would get bigger/smaller, but I think you get the idea). I've tried Transform>Move>Distance, and Effect>Distort & Transform>Transform>Move>Horizontal/Vertical, but both methods just moved all selected objects away from the origin point - no change to the space between objects. any ideas?

...you'd think there'd be an easier way...
Are you talking about objects that already have equal spaces between them? If so, use the Distribute Spacing function in the Align palette. You can specify the desired horizontal/vertical distance between an array of objects.
JET

How do you change the volume for multiple clips in one go?

Hi all,
Im having some trouble with audio. Im posting this in a rush so sorry in advance if its a bit muddled! Im editing snow reports with a journo piece to camera (track one lapel microphone) with overlay (track two nat sound ).
1. is there a way to only bring in track one only and track two only from the source monitor?
2. Is it possible to adjust the volume on multiple clips that are on the timeline (so that i can bring down the nat sound for all of the overlay track two)
At the moment im bringing them into the timeline and adjusting them individually. I tried lowering the volume on one clip and saving it as a preset but it wont let me.
your help is greatly appreciated
Paul

Duplicate the audio once editing is done. In the Mixer window, apply the Fill Left effect to one audio track, and the Fill Right effect to the other. Then adjust the mixer appropriately.

How can i set the space between two button?

Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanks

quote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine

I can not copy a transition between multiple clips in premiere 12

Following the procedure described in the manual, I can not copy a transition between multiple clips in Premiere 12.
Premiere copy a single transition in the clip closer to the time bar.
I had tried in various ways but to no avail. The problem can be solved?
Thanks for the help.

Sig. T.T. Romano,
javascript:void(0)
I finally figured out that you can not copy a transition between multiple clips at the same time and it will copy one at a time.
What seems strange, however, because in Pinnacle, which I used until recently, this could be done, and Adobe is not less than Pinnacle.
Maybe Adobe does not consider interesting this thing, or maybe it is inserted in Premiere Pro. How, for example, in the titles, the ability to animate multiple lines. In Premiere Elements missing but I knew that in the Pro's.
I thank you anyway for your helpful answers.
Vincent Chiti

How do you apply an EQ filter to multiple clips at once?

i need to EQ a VO and rather than apply the filter to each clip serparately, is there a way to apply one filter to multiple clips at once?
thanks
carl

apply your eq effect to one of the clips and adjust settings as required, then select every other clip that you want to apply this eq to, and then drag and drop the effect (from the viewer) onto one of those selected clips ... it will apply to all those selected.
another way, if its the only effect on the clip, would be to apply and adjust the effect, select the clip with the applied effect and press cmd-c to copy, then select all the other clips you want to add the eq to and press opt-v to paste attributes ... in the window select audio filters (only)

How to create a table with the spaces between the row..

Hello,
I am using jdev 11.1.1.6 and I need to insert the spaces between the rows. How this can be done?
Thanks and Regards,
Tarun Agrawal

Hi Tarun,
This css rule is useful to set the padding on each cell:
.AFTableCellPadding:alias {
padding: 10px 0px 10px 0px;
}But if you want to insert a real space between the rows (property "cellspacing") you can do something like this:
af|table > div + div > table {
border-collapse: separate;
border-spacing: 0px 5px;
}AP

In Adobe forms - the space between items more

Hi Experts,
While displaying the ouput through adobe forms , the space between the items is more.
Please suggest me how to reduce the blanklines inbetween the items.
Even I made the subform content as 'FLOWED' and also in context for some fields i added condition if TB_ITEM-TEXT NE space ..
I tried by Events with scripts as,
if ( $.rawValue eq null )
then
$.presence = "hidden";
endif
still space between the items is not reduced. Please help me out from this.
Thanks in advance.
Regards,
Priya.

Hi Ankit and Rajeev,
Thanks for your reply.
As ankit said,
In print program by using read text function module am capturing item texts. If item text exists am setting flag .
with that flag, in adobe form in context am checking condition if flag field not equal to space then it will enter for item text field.
even after this..item texts not exists but in the output spaces are not truncated.
Rajeev,
My requirement is for body page.
My output is like this :
In table am dispalying matnr, desciption, unit of measure , quantity , amount ....
10 8910047 CILPENETR PC 30 20,000
     ab
     abc
20 22447   VALVE     PC 20 30,000
in the above format 10 and 20 are line items.
inbetween this line items ab, abc are the two text fields which displaying material Sales text and Itercompnay text.
if items texts not exist,
I want output should get displayed as like this,
10 8910047 CILPENETR PC 30 20,000
20 22447   VALVE     PC 20 30,000
inbetween 10 and 20 spaces should be truncated if those fields value is empty.
In subform Pallets -> Object -> Subform, alreday its 'Flowed' and Flow direction as 'Western Text'.
Please help me out.
Regards,
Priya.

XML in Flash Taking out the "space" between words

I have a xml document that flash reads to pull random words
from it. I replace the letters of the words with a character, right
now its a minus sign (-). What I am haveing problem with is I don't
want the spaces between the words to be replaced. I want them to be
ignored but still have the space between the words. Example: "big
dog" would be (--- ---). Is there a way to have flash recognize
this "space" and not replace it with anything?
Thanks,
Luke

I think the XML aspect is irrelevant here... all you want to
do is disguise regular text right? There's probably a more
efficient way to do this, but here's a start anyhow.

How to adjust the space between images in a carousel or images with horizontal scroll

I use the next steps to create a carousel or horizontal scroll of images:
Webcenter portal: Spaces
Spaces
Manage Settings
Pages
Create page
Content management
Content presenter
Add images with Plus Icon
It works, but between every image has a lot of space, can you tell me how to reduce the space between every image.
My Oracle Version 11gR1 (11.1.1.3.0)
Regards
Tomas Reyes

Remove line 234 in your HTML code.
<p>& n b s p</p>
This is a redundant line of code. Your spacing should get resolved.
PS: I've given spaces between the tag because otherwise this forum would not display the line correctly.

How can I adjust the space between the dividing line of the footnotes and the continuous text?

How can I adjust the space between the dividing line of the footnotes and the continuous text?

I want to extend the space so the dividing line does not stuck to the normal (continuous) text in my thesis. Do you have a solution? That would be perfect. Thanks a lot!

How do reduce the space between the front panel and the display area

I am trying to reduce the space between the front panel and display area but i am not able to reduce the space

A picture would be very helpful in demonstrating what you are having trouble with.
Lacking that, I will guess.
VI Properties >>> Windows Size
lets you define the minimum size of a FP window.
Well that's my guess!
Did I win?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How do I reduce the space between lines in a JTextComponent?

I've searched pretty thoroughly in this forum and can't find an answer.
My editor displays text fine, but I'm not happy with the space between lines. Is there any way I can reduce the overall height of each line just to close the gap a little?

Okay, I've got it worked out. I reckon it will work for my purposes although I have yet to test it in my app.
The trick is to use a negative value for the StyleConstants.setSpaceAbove(spacing2, -5.0f);The code below shows a comparison between a text pane with default spacing values and a text pane with that -5 space above value.
import java.awt.*;
import javax.swing.*;
import javax.swing.text.*;
public class TestTextPane extends JFrame
public TestTextPane()
super("Text Pane Test: LineSpacing");
JPanel panel = new JPanel();
setContentPane( panel );
JTextPane textPane = new JTextPane();
textPane.setFont( new Font("monospaced", Font.PLAIN, 12) );
textPane.setText( "abcdefghijklmnop\none\ntwo" );
SimpleAttributeSet spacing = new SimpleAttributeSet();
StyleConstants.setLineSpacing(spacing, 0.0f);
StyleConstants.setFirstLineIndent(spacing, 0.0f);
StyleConstants.setSpaceAbove(spacing, 0.0f);
StyleConstants.setSpaceBelow(spacing, 0.0f);
StyleConstants.setUnderline(spacing, false);
StyleConstants.setItalic(spacing, false);
StyleConstants.setBold(spacing, false);
//this line sets the attributes for the text specified by the first two arguments.
textPane.getStyledDocument().setParagraphAttributes(0, textPane.getDocument().getLength(), spacing, true);
JScrollPane scrollPane = new JScrollPane( textPane );
scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
//set up the comparison
JTextPane textPane2 = new JTextPane();
textPane2.setFont( new Font("monospaced", Font.PLAIN, 12) );
textPane2.setText( "abcdefghijklmnop\none\ntwo" );
SimpleAttributeSet spacing2 = new SimpleAttributeSet();
StyleConstants.setLineSpacing(spacing2, 0.0f);
StyleConstants.setFirstLineIndent(spacing2, 0.0f);
StyleConstants.setSpaceAbove(spacing2, -5.0f);
StyleConstants.setSpaceBelow(spacing2, 0.0f);
StyleConstants.setUnderline(spacing2, false);
StyleConstants.setItalic(spacing2, false);
StyleConstants.setBold(spacing2, false);
//this line sets the attributes for the text specified by the first two arguments.
textPane2.getStyledDocument().setParagraphAttributes(0, textPane2.getDocument().getLength(), spacing2, true);
JScrollPane scrollPane2 = new JScrollPane( textPane2 );
scrollPane2.setPreferredSize( new Dimension( 200, 200 ) );
panel.setLayout(new FlowLayout());
panel.add( scrollPane );
panel.add( scrollPane2);
public static void main(String[] args)
TestTextPane frame = new TestTextPane();
frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
frame.pack();
frame.setVisible(true);
}

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All

Delete the space between multiple clips, at once, on the timeline?

Similar Messages

Maybe you are looking for