Delete the transport request Objects already transported

Hi,
I have a request which contains two function grps ( 'Z') , along with it function modules (Z) and related objects ( Z data elements, Z Classes, Z table types and Z table structures).
By mistake this request is transported from System1 to system2.
How can i delete them in system2. One way is manual, but guess some problems could occur in it.
Is there any other easier way.
Thnx.

Hello
You have two options to achieve your goal:
1.a) Create a new transport request (system 1) and include all objects that have been imported into system 2. Release this request as backup for restoring the objects in system 1.
1.b) Delete all objects on system 1 (creates a new request), release the request and import these DELETE entries into system 2.
1.c) Re-import the first request (1.a) into system 1 to restore the deleted object.
2.) Change the source system of the objects imported into system 2 to this system 2. Then you can easily delete these objects in system 2.
NOTE: Approach (1.) is only feasible if you do not have too many cross-references to the deleted objects.
Regards
Uwe

Similar Messages

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete the compressed request in bi 7.0?

how to delete the compressed request in bi 7.0?
Reverse Posting option available in BI 7.0?
Thanks,
Pramod

Hi Pramod,
Check this Thread,
Re: Selective deletion after compression
before posting a thread pls check in the forum.Lots of threads are already been posted related to your Query.
Hope this helps..........

Delete the bad request from ODS.

Hi,
i am tring to delete the bad request form ods object but i am unable to delete the request from ods. i am using full uplaod and the processing is "psa and datatarget in parllel. when i check the data in PSA, it is giving "No data packet numbers could be determi request REQU_5SMPS3MTHYJHHUYQ62AM61H89".
Thanks in advance,
Kasi.

Hi KAsi,
I had a similar issue few weeks back, look in SM50 and chk if there are any processes still running which might lock the object. Also chk in st22 to see if any dumps are created under your login. If tehre are any processes - you can try to cancel them or ask Basis to help u with it.
*I guess* - when you hit delete, the delete icon appears but is not able to lock(enqueue) the object and after sometime the delteion program cannot move forward and hence it returns to original status.
regards
Poonam

How to delete the open requests in the LBWQ

Hi guys ... Can any one let me know how to delete / update the open requests in the queue . I need to delete the Open requests in the LBWQ...we are applying patches and for that we need to delete from LBWQ and RSA7...I guess there is an ABAP report which will deletes the open requests...Can any one let me know that report name please
Thanks in advance...
regards
Edited by: sam on Dec 17, 2007 6:15 PM

If your job control runs fine then best thing is to transfer the records from LBWQ to RSA7 and pull it to BW. If you do this all your delta data is intact and you do not loose any delta data. But if you delete the LBWQ you potentially loose all youre delta data. You can go to LBWE and start the job control and move data to RSA7 and then pull it to BW.
But i am not very clear why you wish to delete this data ? If you do this then better you reinitialize all your delta data by following your normal procedure of filling up the setup tables and then initalizing in BW.

How to delete the duplicate requests in a cube after compression.

Hi experts,
1. How to delete the duplicate requests in a cube after compression.?
2. How to show a charaterstics and a keyfigure side by side in a bex query output?
Regards,
Nishuv.

Hi,
You cannot delete the request as its compressed as all the data would have been moved to E table ..
If you have the double records you may use the selective deletion .
Check this thread ..
How to delete duplicate data from compressed requests?
Regards,
shikha

Deleting the latest request from info cube.

Hi All,
In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
Thanks.

Hello Vincent,
As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
Hope this resolves your issue. Below document explains steps to achieve the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
Best Regards,
Venu Gopal K

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

Is there any way to add a digital copy movie to an iPhone without syncing with my iTunes library? I use iCloud to sync, not iTunes. So when I go to sync movies, it deletes the other ones I already have loaded on the iPhone. Thanks.

or is there a way to upload the digital copy to store in my iCloud account?

Short Dump Error in deleting the Init request

Hi Gurus,
i am loading master data from sap r3 by init update.
now due to some requirement i have to delete the init request , but when i try to delete the request
it goes to short dump and gives the error message as
Runtime Errors         MESSAGE_TYPE_X
Date and Time          01/05/2009 01:54:15
Short text
     The current application triggered a termination with a short du
What happened?
     The current application program detected a situation which real
     should not occur. Therefore, a termination with a short dump wa
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
     Short text of error message:
     Error when opening an RFC connection
     Long text of error message:
     Technical information about the message:
     Message class....... "RSAR"
     Number.............. 051
     Variable 1.......... "Error when opening an RFC connection"
     Variable 2.......... " "
     Variable 3.......... " "
     Variable 4.......... " "
     Last error logged in SAP kernel
     Component............ "SAP-Gateway"
     Place................ "SAP-Gateway on host sapdev / sapgw00"
     Version.............. 2
     Error code........... 631
     Error text........... "max no of gateways exceeded (100)"
     Description.......... " "
     System call.......... " "
     Module............... "gwxxrd.c"
     Line................. 8438
     The error reported by the operating system is:
     Error number..... " "
     Error text....... " "
Trigger Location of Runtime Error
    Program                                 SAPLRSSM
    Include                                 LRSSMF03
    Row                                     1,627
    Module type                             (FORM)
    Module Name                             DEL_SOURCE_SYSTEM_INIT
1624           communication_failure = 1 message l_msg_text
1625           system_failure        = 2 message l_msg_text.
1626       if sy-subrc <> 0.
>>>>>         message x051(rsar) with l_msg_text(50) l_msg_text+50(50) '' ''.
1628       endif.
Please help me on this as untill it will not be deleted, I will be unable to load the data.
suitable answer will get Full points.
Thanks.

Hi Saurabh,
PLEase go through these notes:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383837393039%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383934313030%7d
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_cst/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393738303738%7d

Unable to delete the last request in full load infopackage

Hi All,
I have full load infopackage with many requests with green status and thier request genetaed is 0.
Because of last failure request ia m aunable to activate dso.
i Made last failure request green and triggered. but not successful.
i made it red and tried deleting, no sucess. when i delete its giving Dump
Now i am unable to delete the first request in green status also.its not deleting.
can i delete whole data in dso and do full load again? how to check if there any other infopackages on this dso..
ALL This issues camw across triggering process chian...plz let me know oyur answers....
Thanks,
Venkat

Hi Venkatesh,
I tried deleting through RSODSACTREQ.. but the delete option was disabled in the TABLE ENTRY TAB.
The last request is failed one with red and not tranfered with full records..
All the other records which are in green status does not have symbol genated for reporting purpose and
Request id generated up on activation is zero..
I tried deleting the first request.. when i change its satus to red...
QM action on PSA Z[DSONAME] must have now:Checked to see if automatic activation of the M version should be started.
The M version is then activated if necessary Now?
Req. 0001439786 in DataStore Z[DSONAME]must have QM
status green before it is activated
Request 0001427251 is not completely activated.
Please activate it again.
But i am unable to find both the requests under psa and in adminstartion data target tab... there are some other requests with red status iin psa...
When i try to delete failed request its giving dump
Thanks,
Venkat.

Can we able to delete the particular request

HI,
We have code for to deleting all request from Database.
Can we able to delete the particular request from the Database.
For example, I have request start from 100 to 150.
If i want to delete the request : 125, is any way we can pull all requests in the dropdown and delete the particular request.
Pls any one give a suggestion, how can we archive this?
Regards,
Anandh P

Hi Anandh,
Kevin is right you can use the workspace and use a grab (and then abort) to "delete" the instance.
It will no longer be running and will be viewed as aborted.
You can create a custom UI by using the PAPI or PAPI-WS depending on you preferences.
However if I'm not mistaken there is a third option that is the deletion of instances from the database.
I believe there is a PL/SQL procedure that can be run to delete all instances from the database. However this isn't limited to a single instances..
---( Can someone confirm this.. I'm not sure if this is for BPM or just for SOA Suite?) ---
Hope this helps.
Kind Regards,
Nils

When i try to put new my music it deletes the ones that were already on

when i try to put new my music it deletes the ones that were already on my ipod. How do i stop this?
dell dimension 3000 Windows XP

You can delete songs from your iTunes/computer hard drive after transferring them to the iPod, and for this you need to set your iPod to manage the songs manually.
However, this is an extremely risky option because when (and not if) there comes a time to restore your iPod, which is a very common fix for iPod problems, then all the music would be erased. If you no longer have the music in iTunes (or any other back up), then all that music would be lost.
What if the iPod were lost/stolen/needed repair? Again, the music would lost. I strongly recommend a back up, and if computer hard drive space is in short supply, you should seriously consider an external hard drive. They are not expensive, and the cost is well worth it when compared to the loss of all your precious music.
At the very least back up your music to either cd or dvd before deleting it, particularly any purchased music/videos, as this would have to be bought again if it were lost. See this.
Backing up your media in iTunes.
Please excuse the sermon, but we see far too many people lose their music because of no back up.

Unable to delete the DTP request.

Hi friends, iam unable to delete the DTP request, its showing in yellow mode, iam unable to change it to green or red, i checked in SM50 and SM51 ...is there any other way to delte the request ....any FM .
My version is 7.0 and SP16 BI_Content 9.
Thanks in advance,

Hi,
Try this.
RSBKDATAPAKID DTP: Status Table for Data Packages.
Check this table if you can change the status to red.
If yes - than delete all the requests from manage screen.
Also check table RSBKREQUEST DTP to delete Request if possible.
Hope this helps.
Thanks,
JituK

Can i delete the Previous request and create the new request for loading

Dear Experts,
I use 0FIGL_V40.Cube in my system. These Cube does not contain delta capability.i mean for every time i wil load Full only.
Here my question is the first day load full load,and second day i want to load the data.But can i delete the previous request and load the data with new request.
Please guide me .
Regards,
Srinivasan.

Hi Srinivasan,
I hope the DS itself is not Delta enabled. If so i think you can delete the contents of PSA. This step can be added in the Process chain before actually loading the FULL IP to DS. Then you can include a step to "Delete Entire data from DataTarget" step in the process chain before actually loading the DTP(Can be Delta/FULL. I dont think there is any impact here since both will bring only one request from DS to DataTarget since PSA will have only one request) from DS to Cube.
Hope it helps!
Regards,
Pavan

Deleting the middle request in the cube? is it possible?

Hi all,
I have loaded the data into the cube from an ods. But then i found there is duplication of records for month of feb 2008.
And there is 4 request above that.
Can i go ahead and delete the request and reload it again?
Nor if i delete that request, will all my above request will also be get deleted ?
Can anyone pls advice me on this?
Thanks
Pooja

You won't be able to delete the middle request without deleting the latest requests, that is because it will create data inconsistencies.
From your statement, I see that you have monthly loads, if that is the case, do you have any selection if your infopackage to load the data, if you have, I would recommend you to do a selective deletion and and do a full load for the same selection from DSO to cube.

Delete the transport request Objects already transported

Similar Messages

Maybe you are looking for