Delete the user mail box when un-enrollment

Hi,
When a user separates from the company, we need to perform the un-enrollment process. As a part of this process we need to remove the user's Active sync email account configured on the WP8. Is it possible to achieve the same using the DM client and SyncML?
If that is possible, then can you please provide a sample syncML command to remove the active sync email account.

The device would have to be under management by one of the MDM vendors such as
SilverbackMDM. If you have the physical device, then I would suggest contacting the hardware vendor and performing a device wipe. To use the Device Management client the device will first need to be under management.
Cheers
Wayne Phillips

Similar Messages

Why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

why is "erase junk mail" de-highlighted in the drop down menus. I'm not able to delete my junk mail box without doing each one individually. Simple, but please someone help with an answer. Thanks.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

The e mail address in my I tunes setting is different but when I update my apps a different e mail address come . How can I delete the e mail address which shows for updating apps

The e mail address which is in the setting of my I tune store does not show up when I install apps or update them it shows a different email address how can I delete the e mail which shows up while updating apps & switch to the one already in my settings

All apps include DRM protection that is tied to the Apple ID that was used to download the apps.
This means the apps that need an update were downloaded with the Apple ID you are being prompted for.

How can I delete the 50 old email messages in the "ALL MAIL" box of my iphone 4s

How can I delete all of the 50 old messages in the "ALL MAIL" Box of my iphone 4s?

Blueyonder got bought out by Virgin Media didn't they, in which case they now use a Google server?
You should be able to log on using the web and delete everything from there:
mail.blueyonder.co.uk

Mail messages are marked "junk" in the outgoing mail box

For some time all my outgoing email messages have been marked as "junk" in the sent mail box. Today found that if I do not mark my personal information in my address book as "Me" my sent messages are no longer marked "junk". Does anyone know how I can fix the problem so my personal information can be marked "Me"?
iMac intel Mac OS X (10.4.8)
iMac intel Mac OS X (10.4.8)

The following procedure thoroughly gets rid of all the files used by the junk filter, so that Mail creates them anew, and should fix the problem in the cases where the simple procedure provided in my first post doesn’t:
1. Quit Mail if it’s running.
2. In the Finder, go to ~/Library/Mail/.
3. Locate LSMMap2 and move it to the Trash. This file stores information about what does and doesn’t constitute junk, and allows the junk filter to learn. Deleting this file is what Preferences > Junk Mail > Reset does. The file was called LSMMap in early versions of Mail; delete that as well if you see it.
4. Locate any MessageRules.plist (Mail 2.x) and/or MessageSorting.plist (Mail 1.x) files and move them to the Desktop. This is where Mail stores all the rules, including the rule that governs what the junk filter does.
5. Locate DefaultCounts and move it to the Trash. This file keeps statistics about the number of messages that have been marked as junk, either automatically by the junk filter or manually by the user.
6. Look for the account folders. The name of each account folder starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. Open each of the account folders, locate the Junk.mbox or Junk.imapmbox folder within it, and move it to the Trash if present.
7. Go to ~/Library/Mail/Mailboxes/. Locate any Junk.mbox mailboxes there (their name may include the account name in parenthesis), and move them to the Trash.
Note: Steps 5, 6 and 7 may be unnecessary. Also, messages in Junk mailboxes with an .mbox suffix are stored locally and will be lost forever as a result of doing steps 6 and 7. If there is a chance that you have legit messages there that you want to preserve, either try skipping those steps, or move the messages to another mailbox in Mail first, or move Junk.mbox to the Desktop (to be imported back later) instead of to the Trash. Junk mailboxes with an .imapmbox suffix aren’t a concern because they are stored on the server and Mail would rebuild them automatically.
8. Open Mail. As a result of removing the rules file, the junk filter will be disabled now. You may want to either tell Mail to go offline immediately after opening it, or shut down the Internet connection before opening Mail, to prevent it from downloading anything until the junk mail filter has been enabled again.
9. Go to Mail > Preferences > Junk Mail, enable junk filtering, and configure it however you wish.
10. Go online again if you went offline in step 8.
If the above solves the problem and you don’t have any rules you’d like to preserve or recreating them is not a daunting task, just trash the rules files that were moved to the Desktop and be done with it.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

How to Delete the node from cluster when the machine crashed?

In an three nodes Rac of 11g r2,How to delete the node from cluster when the machine crashed?
There is now way to repair the machine and have to add a new one.
What is step to follow up?

hi
IF YOU WANT TO DELETE RAC1 NODE
check $./olsnodes
1) delete the instance using dbca from any active nodes
crs_stat -t
srvctl stop asm -n rac1
2) delete listener
3) delete oracle_home from oracle user
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={RAC1}
4)delete asm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={RAC1}
5) update cluster node
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<db_home> "CLUSTER_NODES={active nodes like rac2,rac3}
6) update ASm home
$ORACLE_HOME/bin/runInstaller -updatenodelist ORACLE_HOME=<asm_home> "CLUSTER_NODES={active nodes like rac2,rac3}
cd $ORA_CRS_HOME
cd crs/opmn/conf
check for
$cat ons.config
remoteport=6200
cd crs_home/bin
$./racgons remove_config rac1:6200
$ go to crs home
and $ORA_CRS_HOME/crs/install/rootdelete.sh
$ORA_CRS_HOME/crs/install/rootdeletenode.sh
check for ./olsnodes

Problem in deleting the user

when iam trying to delete the user from subone directory server
it is giving the following exception
Insufficient 'delete' privilege to delete the entry
how to set the privileges in sunone directory server.please send as it is very urgent for me

What is the ID you were using to remove the user? If regular user, maybe it's the ACI of that entry prevented you from removing that entry.

How to view/edit/delete the user created profile in oracle 9i? Very Urgent

Friends,
I logged in as system in oracle 9i.
SQL> create profile testpro limit
2 idle_time 1;
Profile created.
SQL> alter user scott profile testpro;
User altered.
Then i logged in to sqlplusw as a scott user.
and i waited for 10 mins after that.
sql> select * from cat;
its working......
how come? i have already set a idle time to 1 minute.
Please correct me if im wrong.
Also, how can i view/edit/delete the user created profile.
Thanks & Regards
Sathyguy
Message was edited by:
sathyguy

The resource limits set for a profile are enforced only when you enable resource limitation for the database.
Enabling and Disabling Resource Limits While the Database is Open
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/users.htm#15451
Manu

Approval work folw while Deleting the user from user profile

Hi
I have a requirement like
I configured AD as auto provisioned.
How to configure approval workflow, when administrator deleting the user from user profile (xellerate form).
FYI, Delete task assigned as undo task for the create user task
Thanks
Edited by: user11963802 on Dec 15, 2010 2:31 AM

Create one approval workflow and create one Process Determination Rule like
If
Request Action == "Revoke"
Attach this rule with RO.
Hey sorry
I shared the information for Revoking user from target Application.
Hide Delete User button from JSP
You can create Dummy Resource with Approval workflow for Deleting User. And after getting approval you can use DeleteUser API to delete user from OIM.
Edited by: Rajiv Dewan

After installing mountain lion the local mail boxes disappeared

after installing mountain lion the local mail boxes disappeared.

This is my problem too:
All of my local mailboxes (On my Mac) disappeared from the sidebar. However, I do not have the 'triangle' on the Inbox that I can turn to reveal the list of mailboxes -- that disappeared too (and nothing happens when I hover over "Inbox"). I do know that the mailboxes are still there, somewhere, because when I go to create a New Mailbox, I can navigate to "On My Mac" and the entire mailbox list shows up there in the dropdown. How do I get them back onto my sidebar if the option to do that is no longer on the "Inbox" icon?

I am a BT Yahoo customer using Apple Mail, on iMac, iPad iPhone, 4 to 8 times a week sent mail is not delivered into the sent mail box and I have no record of the sent e-mail or its content. BT say it's an apple problem. Any help would be appreciated. Ted

I am a BT Yahoo customer using Apple Mail, on iMac, iPad iPhone, 4 to 8 times a week sent mail is not delivered into the sent mail box and I have no record of the sent e-mail or its content. BT say it’s an apple problem. Any help would be appreciated. Ted

Hello,
Are they just regular size eMails?
Do you have more than one eMail account setup?
Next time it happens, get...
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
Use it to Find All, for Name ends in...
.emlx
(dot ee em el ex)
And Modification Date, is within, the last 5 minutes or whatever.

New mail doesn't make the "new mail sound" when received

Hi! I have a .mac email account, and I use two different aliases for the account. I want all the mail sent to one of the aliases to go into a designated mailbox. I've tried doing this with both a smart mailbox and using a rule to move the messages to a mailbox on my .mac account (not both at the same time, I've tried it separately both ways).
Both of these options work, except that mail will not make the "new mail" sound when I get a new email for that mailbox. Even when I add to the rule that it should make a sound, it doesn't. Other mail (i.e., all of my other mail that is delivered normally to my inbox) is not affected--I still get the normal sound. Any ideas? Thanks! (And BTW, I always give points for helpful answers!)

You’re welcome.
Actually, I don’t participate here just to be helpful. I also do it to learn. I know WAY more about Mail now than I knew when I started helping people here... and without having experienced myself any of the problems I troubleshoot each and every day...
I really wanted an answer.
That’s precisely why you shouldn’t say in advance that you’ll give points. Nobody is going to assume you won’t, so there is no need to say you will. All you have to do is mark posts when appropriate (without saying in advance that you will). That makes everybody happy.
don't you ever get frustrated by the number of people who don't
mark helpful or solved answers as such?
Not if the OP somehow lets me know whether the proposed solution worked or not. Sometimes I know for sure what the problem is and how to solve it, but others I don’t, and the user’s feedback is way more valuable to me than any points I could get.
So yes, merely setting up a smart mailbox is enough to make Mail
to quit making the sound.
I’ve been unable to reproduce what you describe, but I’ve found something that could be related. Selecting an IMAP (or .Mac) mailbox causes Mail to check for changes made to that mailbox, including checking for new mail and applying rules as appropriate, just like it would do when automatically checking for mail according to your settings, except no sound is played if new mail arrived...
Could that be what you’re observing, i.e. could it be that Mail is actually behaving as expected but it seems that it isn’t because you’re checking for new mail as a result of manually selecting the account’s Inbox or something like that?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

I use a iphone and MacBook Pro using mail on each. How can I see the same mail boxes on the laptop that I see on the iPhone?

for starters this is not the forum for notebooks or for that matter icloud or iphone.
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
http://www.apple.com/support/iphone

Having been without my Mac for a month I've been using iCloud mail. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail?

Having been without my Mac for a month I've been using iCloud mail.on a PC. The new mail boxes that I set up there do not automatically show up in Mail on my replacement Mac. Is there any way to transfer them from ICloud mail to Mail? Thanks.

sure pretty simple. make a backup of your current settings
http://support.apple.com/kb/HT1766?viewlocale=en_US
then restore device from old backup you need pics off of
then import pics to computer
http://support.apple.com/kb/HT4083
you may need to save pics to camera roll first
then restore the new backup and sync pics back to phone via itunes
Peace, Clyde

Delete the user mail box when un-enrollment

Similar Messages

Maybe you are looking for