Delete unsent message from Outbox

HELP! I sent an email that I didn't mean to send- and it CANNOT go, or I will ruin a surprise engagement party! It was a forward out of one acct, but I turned off my phone- tried to delete & it's stuck in the outbox. Every time I Edit to Delete or Open to trash, it comes back! It still has not sent, and I get an error msg that says it cannot send mail cos it cannot connect to server... but I am still receiving mail.
PLEASE HELP!

hi, have you tried pressing and holding the email for a few seconds? that might bring up a menu where you can choose to delete it. also, you might want to check your data usage. the phone has probably been using data trying to send that email over and over again.  hope that helps

Similar Messages

  • E65 cannot delete "sending" sms from outbox, any i...

    Hi All,
    I have an E65 and for the past few days have had an SMS stuck in the outbox with a "sending" status due to the fact that the number I was trying to send it to was missing one digit. I cannot figure out how to delete the message from the outbox!
    Anyone any ideas?
    Thanks
    Dean
    Solved!
    Go to Solution.

    go to messages-settings-text messages
    now in message centers delete all the centers except the one you are using (you can tell wich one you're using by takeing a peek at 'message center in use"
    rename the message center to something else than previous -
    go to "message center in use" make sure it's selected
    restart phone
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How can I delete saved messages from my iphone 5s to be able to update it?

    I have needed to update my Iphone 5s from the past 2 updates but it says that I have 4.2 GB of saved messages.  I don't know where to go to delete them.  I delete regular messages from my phone daily so I'm not sure what is being saved and where.
    Thanks!

    You would need to set up your mail account as a POP account instead of IMAP.
    I'm not sure if Hotmail/msn offers that -

  • How do you delete voicemail messages from iphone 5s

    I'm trying to delete voicemail messages from iphone 5s.  Based on visiting previous discussions on this subject, I've tried "resetting network settings" and "turning airport mode ON, deleting messages, then turning airport mode OFF" -- to no avail. I'm receiving an alert that I've reached capacity...please assist. I run my business on my iPhone and right now I'm missing opportunities.
    Thanks in advance for your expediency.

    From the iPhone User Manual:

  • Can't delete email messages from some folders in Mail

    I CAN delete email messages from header Folder "MAILBOXES" (drafts, sent, trash); however, there's another folder header below called "ON MY MAC", where I save various emails by dragging them to a subfolder, and when I try to delete these, I get this message:
    "The message '(subject of email)' could not be moved to the mailbox 'Deleted Messages --- On My Mac' The destination mailbox 'Deleted Messages --- On My Mac' does not allow messages to be moved to it."
    The only way to delete from this folder is to hold Control, select from the dropdown Move to, then Trash, and then one of three sub-trash folders (the one that has my email address) -- this is a pain to do.
    Mail is just not working properly any more (I just added 2 other posts - one about crashing, another about all my Fonts missing)
    thank you in advance!

    Colin,
    Have you checked Mail>Window>Previous Recipients for the old address? If not, attempt to "Remove From List" at that location and let us know what happens.
    ;~)

  • How can i link my E-mail with my iPad in a way that i can delete my messages from my email inbox server not from my iPad inbox only?

    How can i link my E-mail with my iPad in a way that i can delete my messages from my email inbox server also not from my iPad inbox only?
    Because when i delete emails from my iPad inbox, it will be deleted on my iPad only but when i check my email inbox server from the browser its not deleted!
    So how can i set up this link so when i delete any email from my iPad it will be deleted from my email inbox server also?

    Hi Pierrot10,
    Insert your backup disc (or plug your external hd), then open Mail.
    In the File menu, click *Import Mailboxes* and follow the steps for a *Mail for Mac OS X* transfer.
    Navigate to your CD/DVD's or external HD's backup and hit "OK".
    This should create a new "Imported" folder in Mail with all your old messages in it, that you can then rearrange as you wish, creating new mailboxes etc.
    Axel

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • How to delete the messages from sxmb_moni with status cancelled

    Hi ,
    how to delete the messages from sxmb_moni with status cancelled
    Is there any report for this
    Regards
    Suman

    I think just for deleting the jobs you can do this only
    Scheduling Delete Jobs
    To schedule delete jobs, proceed as follows:
           1.      In the Integration Engine -
    > Administration menu, choose Schedule Delete Jobs.
           2.      Select the job(s) to be scheduled.
           3.      Specify the start time and date.
           4.      Specify the period you want to use and choose Schedule.
    For an overview of all jobs, choose Jobs.

  • How to delete the messages from JMS Queue

    Hi,Can anybody help how to delete the messages from the JMS Queue.Thanks in advance.

    You can dequeue the message using a JMS client or delete it using Weblogic Admin Console -
    http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jms_modules/queues/ManageQueues.html
    Regards,
    Anuj

  • How can I delete text messages from my iphone?

    Hello everyone,
    How can I delete text messages from my iphone?  I do not want to reset my iphone setting. If it is nesscary to reset my iphone setting, will I lose everything?
    Please let me know,
    Thanks,

    Just delete them. Or, do you mean beyond just deleting them? Then, you'd need to wipe the phone - select Settings > General > Reset > Erase All Content and Settings. That's a secure wipe of the iPhone contents, takes several hours (connect to AC power). You'll need to set your phone up from scratch (and erase the old backup(s) from your computer, since your SMS history is part of the backup).

  • After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

    After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

    Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
    As expected, cdm-git also works fine since DMs only work in the root mode as of now.
    Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
    Last edited by looki (2014-08-23 13:04:49)

  • How do i delete all messages from my email?

    I had a server problem over the weekend and all of my email messages that i got from day #1 are reloading as new, unread mail. How can i delete them all(thousands). I'm using outlook and have not been able to sync my Inbox. Contacts and all else is fine.???

    Check your account settings with Outlook for removing or deleting messages from the server when downloaded by Outlook.
    The iPhone's email client includes the same settings, as do all email clients for a POP account.
    I would handle this with Outlook. Delete and recreate the account with Outlook, and before checking the account for new message with Outlook, select remove or deleted messages from the server when downloaded for the account preferences with Outlook.
    All messages available on the server will be downloaded again by Outlook, and removed from the server when doing so. You can mass delete all messages from Outlook.
    When deleting and recreating the account with the iPhone's Mail client, none of these messages will be downloaded by the iPhone's Mail client after being removed from the server when downloaded by Outlook.
    Or since you likely have webmail access for this account using a browser, you can mass delete all messages available on the server via webmail access. After deleting the messages from the server, delete and recreate the account with the iPhone's Mail client.
    An IMAP account is much easier in this regard, which is designed to be accessed with multiple email clients on different computers or devices.
    A POP account is designed to be accessed with a single email client on one computer or device.

  • How can I read non-deleted text messages from months ago without having to continuously press "Load Earlier Messages"?

    I never deleted text messages from a specific person in case I ever wanted to go back and look at them. Now months have gone by and I don't feel like continuously pressing "Load Earlier Messages" for hours trying to get back and look at them. Is there anyway I can upload the whole conversation on to my computer and read the entire conversation from the beginning?

    Yes.
    I use iBackupBot.

  • If I delete one message from my inbox they all disappear -why & how do I retrieve them?

    Twice this week I have deleted a message from my inbox, using the edit button & then highlighting the message to delete, then pressing the delete button at the bottom of the page & ALL my emails in my inbox disappear!  Where are they & how can I retrieve them?

    wow thanks I don't understand why no one could have told me this. By any chance do you know why iTunes Store won't work onmy laptop and says an error occurred then some random number like -9872 or something

  • How do you delete specific message from users in Exchange 2013 DAG database?

    Our network has been inundated with spam from INTUIT.COM with the SUBJECT: PAYMENT OVERDUE and contains a link to download a form from a Dropbox. Obviously, very suspicious and clearly spam. We're using Postini as our Edge Transport/ Spam filter but messages
    are still getting in. I've enable anti-spam on all my mailbox servers, set the SCL values but that hasn't worked.
    I understand that Exchange Edge Transport role has the more aggressive spam fighting features but Microsoft also recommends an online spam filter. 
    Needless to say, we've taken steps to quarantine those messages based on subject and sender in Postini but now would like to delete those messages from the users in went to. My users are two different DAG mailbox databases. I found this article http://www.techieshelp.com/delete-mail-from-multiple-mailboxes/ but
    the command didn't work. I'm thinking its because I have DAG and a couple of databases. I even tried "get-mailbox -database "databasename" | search-mailbox -searchquery subject: "Payment Overdue"" and that didn't work. 
    I'm running Exchange 2013 SP1 DAG across two sites comprised of four 2013 SP1 mailbox servers.

    Check this out
    http://technet.microsoft.com/en-us/library/ff459253%28v=exchg.150%29.aspx and specifically look at the section titled  "Search messages and log the search results"
    Or you can use this
    http://technet.microsoft.com/en-us/library/aa996371%28v=exchg.150%29.aspx with the WHATIF parameter
    Alternatively if you are open the 3rd party solutions check out Lucid8's DigiScope
    http://www.lucid8.com/product/digiscope.asp
    which would allow you to see the search results and then delete OR if desired you can set the On FIND action to Export to PST and then Delete so that you can preserve and then remove messages on the fly as the search system finds
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003 -->
    2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

Maybe you are looking for

  • A suggestion to adobe photoshop

    When we handle a big picture with brush,We don't know we have modified in those places if we do not enlarge the picture.Could adobe add a new feature:when we use a key in the keyboard,photoshop can tell us where did we had handle.(the place of one st

  • EJB3 Entities + Web Services: A cycle is detected in the object graph

    I have a Java EE 5 application, using Glassfish v2. My ejb project consists of a handful of entity beans, session beans, and this problem arose when I added a new web service. Here is a simple scenario borrowed from another forum post with a similar

  • Add one Select-Options : LIKP-LGBZO into Shipment Transaction - VT02N

    Hello, Transaction - VT02N(Change Shipment) -- Now choose Select Deliveries(F6). Now one Selection-Screen will come to Select Outbound Deliveries. In this Screen I want to add one more Select-Options (LIKP-LGBZO) How can I add this  Select-Options in

  • DMS and KM

    Hi All, Scenario : External Guy logs in to the  Enterprise Portal and answers a questionaire which would be stored in KM in xml format. But our requirement is to tranfer these documents from KM to DMS creating DIR's for the same. I know there is a DM

  • Creating a Oracle 10g stored procedure as a datasource for  crystal 9 repor

    Can someone direct me to instructions or information on how to create a Oracle 10g stored procedure as a datasource for  my Crystal  Reports 9.0  report?