Delete XMP Core Properties not saving changes

Hi,
I'm editing some legacy docs for enterprise search retrieval optimization using 6.0 Pro, and need to remove the Modified Date meta tag so not to mislead users in to thinking the doc content was modified.
When I use the delete feature via Advanced/Doc Metadata/Advanced, it only deletes the property as long as I'm in that window. When I go to File/Doc Properties, the data is still there, and then when I go back to the Adv feature, it is also there.
Could someone please explain if this behavior is the expected functionality, of if this might be a bug.
Thanks!
Anne B
PS - Even though I'm not using the SDK, I though you all might know :)

This is the expected behavior. The ModifyDate XMP metadata property is propagated from ModDate key of the PDF document DocInfo dictionary. It represents the modification time stamp of the document. Although you delete the property from the embbeded metadata packet, the ModDate key of PDF will still be present.
Hope this helps,
Shulin

Similar Messages

IDVD 06 not saving changes?

Greetings. I teach an adult ed class in iLife. Unfortunately, the lab has old single 533 G4s. When we use iDVD 06, the program is not saving changes made in the different drop zones, etc. We place elements in drops zones, tell the program to save, quit and relaunch...nothing saved.
This problem was repeated by a student on his G5 at home.
Any ideas?
Thanks.
Michael Colin
Mac G4 Single 533 Mac OS X (10.4.4) Problem on G4 and G5

Hw much free space is left on the macs?
Plenty. These are very small projects we're working on.
Thanks for the response.
Michael
Mac G4 Dual 533 Mac OS X (10.3.9)

Stocks App not saving changes

My stocks app is not saving changes no matter what changes I make. After making a change, I'll exit the app, re-enter and it defaults back to a whole bunch of stuff I didn't add.
Can someone help me with this, I'm not sure where to even start!

Nadia Bielawa wrote:
This did not help at all. I'm not about to restore my iPhone and set everything up again, there must be a simpler solution.
Th simple solution is restart.
If that fails, thenreset.
If that fails, then restore from backup.
If that fails, then restore as new.
If that fails then make an appointment at the genius bar.

Mail not saving changes in Mailbox Behaviors

For one of my accounts since the upgrade to Mavericks when I enter the Mailbox Behaviors section, I found that Drafts, Junk and the one under Trash named Store Deleted messages on the server is checked.
I uncheck them because I doon't want them checked. I Save the changes I made then go back to that account and the same ones I just unchecked are now checked again. Its not saving what I just unchecked.
What the heck is wrong?
Also noticed that in OSX 10.8 I could drag all my email accounts to a different order than the way they are now listed. Can't do that now.

Thanks for discovering this issue being connected to drafts. I have trouble with this for a couple of months as well.
Since you assume it to be connected to "drafts", I suggest to deselect "Store draft messages on the server" for your IMAP-Account. I just did this for myself, to see if it helps, and can't give you results yet. Maybe you just wanna try simultaneously. I guess, the reason for our problem could me some messy communication between Mail and the server, where one party get's confused.
Greetings
Paul

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

XMP Files missing/not saved?

Please pardon the post of this redundant - I searched and couldn't find anything that helped...
I'm using Lightroom 2.6 on Windows Vista. I've toggled the xmp switch so that XMP files should be saved.
I make changes to metadata - primarily keywords, location, captions, etc., and when I go to the folder where the images are stored, there are no xmp files. I did a hard drive search for *.xmp and found old files from a LRv1 catalog, but not for those files I just edited.
Other than the Edit Catalog Settings Metadata switch, is there some other place these files could be written to?
Thanks in advance.
Clayton

For raw camera files LR will create .xmp files and for the others, dng, jpeg, tiff the data is stored within the actual file.

Notes in "Notes" automatically deleted. Now is not saving new, too.

There were 5 to 7 notes, very very important, saved in My 'Notes' Tab in iCloud menu. But now there is nothing, I didn't delete them nor did I edited them, but they just disappeared...!! Also no new notes are saving, it saving :
"Could Not Save Changes.
'Document Name' could not be saved. Please Try again Later'."
this is really irritating from my Love Apple....:( Can Anyone Please help me out...??

Did you make any backups of your iPad to iTunes ? So you could restore the previous versions?
Also, I could restore older apps from my TimeMachine backup. The backup of the iTunes Library included the apps.
If your backups do not go back in time far enough, try this:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Sometimes the AppStore will let you buy an older version, if your system is not compatible with the current one.

Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI. In the enhancement, I take the data records and make some changes to some quantities and units of measure. After making these changes, I let the function module continue on as normal. The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
Here's an example: An EDI order comes in with 6 EAs of a material. In my enhancement, I change it from 6 EAs to 2 3PK. I then let it go on its way. The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs.
The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open.
Can anyone give me any clues on how to make my changes stick to the IDoc?
Thanks,
Curtis

Ok, I figured out why it's not saving. Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy. So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB. I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT). The problem is that I can't change them because the IDoc is still open.
Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
Thanks,
Curtis

NOT SAVING CHANGES OR EDIT'S!!PLEASE HELP

hey guys,
i had this problem before along with many others, with the earlier vers of iphoto. until apple gave us the fix...now agin with 5.0.4.any changes or edits(redeye fix) are not saved to any of my pics!!
is anybody else having this problem??
is there a fix or update??
please help......thanks.

Hi sunny,
Check the permissions on the Library and Pictures folder. If they are set for you, make sure the library is not locked.
Get info on the iPhoto Library folder
screenshot of how the "get info" window should look for your user
If edits are not saved it could be the image files are locked, especially if these files came from another computer or sent to you in email. Do a "get info" on these files and unlock them.

ABAP - BDC transaction not saving changes to records

I am trying to write my first ABAP code using BDC recording. Essentially I would like to flag the "Final Delivery" field (EKPO-EGLKZ) for a range of documents by recording transaction MASS.
The code runs without errors - but the changes are not saved. I have run the code in "Processing Mode: A" (Display all screens) and the program successfully loops through each record & saves the updated fields. When I look at the documents in ME23N the changes have not been saved.   Running the MASS transaction manually results in the changes being successfully saved so I can rule out any data validation issues.
Does anyone know why the changes refuse to save when running the code below?
I have considered trying to use BAPI_PO_CHANGE instead of BDC, but I am new to ABAP and I thought the BDC code would be less complex.
report Z_MASS_REMOVE_FDI_DCI
       no standard page heading line-size 255.
include bdcrecx1.
TYPES: BEGIN OF ty_tab,
MASSOBJTYP(7),
MASSVARNAM(7),
DOCNO(9),
ITEM(1),
END OF ty_tab.
DATA : it_tab TYPE STANDARD TABLE OF ty_tab.
DATA : wa_tab TYPE ty_tab.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'X:\STO.TXT'
* FILETYPE = 'ASC
has_field_separator = 'X'
TABLES
data_tab = it_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
END-OF-SELECTION.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-MASSOBJTYP,
wa_tab-MASSVARNAM,
wa_tab-DOCNO,
wa_tab-ITEM.
PERFORM open_group.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MASSSCREEN-OBJECT'
                              wa_tab-MASSOBJTYP.
perform bdc_field       using 'MASSSCREEN-VARNAME'
                              wa_tab-MASSVARNAM.
perform bdc_dynpro      using 'SAPMMSDL' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSSCREEN-OBJECT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=NEXT'.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_field       using 'MASSFREESEL-LOW(01)'
                              wa_tab-DOCNO.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(02)'.
perform bdc_field       using 'MASSFREESEL-LOW(02)'
                              wa_tab-ITEM.
perform bdc_dynpro      using 'SAPLMASS_SEL_DIALOG' '0100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CRET'.
perform bdc_field       using 'BDC_CURSOR'
                              'MASSFREESEL-LOW(01)'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FDAE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSINTERFACE' '0200'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'NR_ITEMS'.
perform bdc_dynpro      using 'SAPLMASSMSGLIST' '0300'.
perform bdc_field       using 'BDC_CURSOR'
                              'REOML-MSGTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=EXIT'.
perform bdc_transaction using 'MASS'.
ENDLOOP.
PERFORM close_group.

Where is BDC_INSERT.
If u use OPEN and CLOSE_group u need to use INSERT_GROUP also to update in database.
A session will be created and u nedd to run the Session in Sm35 in order to update the database.
Edited by: Ranjith Kumar on Sep 18, 2008 6:41 AM

Aironet 1242ag - not saving changes

dear friends...
i am struggling with this devices now from some time.. not sure where is the mistake ...when i am trying to configure wireless device (AP) from web using exprerss setup or nornal manual mode .. it is not saving any changes.. means clicking on apply button does not do anything .. infact its not getting clicked... please see the screen shot attaced ..my express setup menu is different then the one mentioned in this link
http://happyrouter.com/how-to-configure-a-cisco-wireless-access-point-ap-from-scratch
any still if you make any changes and refresh the page it comes back to 10.0.0.1 ip which is shown on the screen shot...
guys any help will be really appreciated ...
or if someone can also share the commands to configure the same... but before commands i want to sort out my above issues...

Hi,
The simpleset configuration would be something like as below.
dot11 ssid TEST
vlan 1
authentication open
interface Dot11Radio1
encryption vlan 1 mode wep mandatory
interface Dot11Radio1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio0
encryption vlan 1 mode wep mandatory
interface Dot11Radio0
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
encapsulation dot1Q 1 native
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip add x.x.x.x y.y.y.y (where x.x.x.x is the ip address whichyou want to assign and y.y.y.y is the subnet mask)
ip default-gateway x.x.x.x (where x.x.x.x is default gateway which you want to use)
Hope that helps
Regards
Najaf
Please rate when applicable or helpful !!!

Cisco Prime Soft Appliance not saving changes to syslog.conf

Greetings,
I'm having an issue with the syslog.conf file on a Cisco Prime LMS 4.2.4 soft appliance with a Solaris base. My workplace uses local4 as the logging facility for its network devices, and according to a discussion I found on this site, I need to add the line:
local4.info /var/log/syslog_info
I have attempted this several times; we're approaching at least 5 attempts today. I have attached text files created from putty logs where I've attempted to make the necessary change. I appreciate any assistance the community can provide.
Regards,
Rob

Hi, Afroz,
I really appreciate your assistance, but I'm afraid my hopes have been dashed. The syslog.conf reverted to its original configuration. I will go through my steps to be sure that I understood your suggestion properly.
I edited the syslog.conf to put all messages from local4 in /opt/CSCOpx/conf/syslog-entries.txt. Then, I exited the shell to the console, issued the 'write mem' command, and closed the session. Upon my reconnection, I found that my changes to the syslog.conf were not saved.
Did I make the correct edits in the correct places? Another question, is this bug present in the versions of Prime LMS running Linux and/or Windows, or does it only exist in the soft appliance running Solaris?
Regards,
Rob
Edit:
I'm reading the "Installation and Migration of Cisco Prime" PDF, and it gives me the impression that Cisco Prime is only supported as Windows, Solaris, and soft appliance installations. Is that correct? If it is correct, then installation of Cisco Prime LMS is not supported on other Linux distros such as Ubuntu Server, CentOS, Fedora, etc.?
My thanks.

....STP not saving changes....

...a few people have experienced this problem and as of yet i've not seen an answer. I imported some music from an old cassette into STP did some EQ changes to bring out lost clarity then saved the mix, but when i replayed the new mix none of the changes were saved! anyone have answer for this one? thanks

That indicates that your primary account is the culprit. First close iWeb, delete the iWeb preference file, com.apple. iWeb.plist, that resides in your User/Library/Preferences folder, launch iWeb and try again.
If that doesn't help it could be another preference file that's interfering with iWeb. Here's how to determine if that's the case:
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
OT

Iphoto not saving changes

My iphoto5 (5.0.4) has suddenly decided not to to save changes - eg: red eye or sharpening. I make the change, click done - but the saved image then resorts to the original (eg red-eye returned!) Anyone else with this problem, or know how to fix? thanks

thanks for responses! I tried phone support, but got nowhere - the guy I spoke to said he had not heard of the problem. I went to Apple shop in regent street - they suggested: first to delete i.photo preferences, then to create a new account (to see if the problem is with the soft ware or on the hard-drive) - and then if problem shows up on soft ware, to re-install i photo from the start up disc 1. I have not done any of this yet - but will give it a go. maybe of use to you too.

Table maintenance view not saving changes

Hi experts
I have created a Z table with corresponding maintenance view (with transaction). Also, there is a Z program to insert records into the table from xls file.
When accesing the maintenance view, I can add and remove entries, but the problem is:
       when I update a record, if the records has been created using the maintenance view, then changes are saved to database, but if I try to modify a record added by using the Z program, none of the modifications are saved to DB.
I have re-created maintenance view, and table properties (delivery class A, display/maintenance allowed ...) seem to be OK.
Can someone provide some help with this?.
Many thanks in advance for your help.
Best regards,
Carlos.

HI
Thanks for your answer, but didn't work.
Below my program (
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_fin
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 9
      i_end_row               = 9999
    TABLES
      intern                  = gt_fichero
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
LOOP AT gt_fichero INTO gs_fichero.
    CASE gs_fichero-col.
      WHEN 1. "Proyecto
        "Validaciones
        gs_unidades-proyecto = gs_fichero-value.
      WHEN 2. "Tipología
        "Validaciones
        gs_unidades-tipologia = gs_fichero-value.
      WHEN 3. "Alias
        "Validaciones
        gs_unidades-identificador = gs_fichero-value.
      WHEN 4. "Superficie
        "Validaciones
        TRANSLATE gs_fichero-value USING ',.'.
        gs_unidades-superficie = gs_fichero-value.
      WHEN 5. "Estado
        "Validaciones
        gs_unidades-estado = gs_fichero-value.
      WHEN 6. "Entrega
        "Validaciones
        gs_unidades-entrega = gs_fichero-value.
      WHEN 7. "PVPCoste
        "Validaciones
        TRANSLATE gs_fichero-value USING ',.'.
        gs_unidades-pvpcoste = gs_fichero-value.
        "Se añade el registro a la tabla de datos maestros
        INSERT ztt_fi_unidades FROM gs_unidades.
        CLEAR gs_unidades.
        IF sy-subrc EQ 0.
          gv_total_correctos = gv_total_correctos + 1.
        ELSE.
          gv_total_erroneos = gv_total_erroneos + 1.
        ENDIF.
        gv_total_registros = gv_total_registros + 1.
      WHEN OTHERS.
    ENDCASE.
ENDLOOP.

Delete XMP Core Properties not saving changes

Similar Messages

Maybe you are looking for