Deleted all .kext files and now my macbook pro would not switch on. What do I need to do?

By mistake I deleted all .kext files in the extensions folder and now the macbook will not go past the error screen at the start up with panic kernel. What do I need to do? How do I restore from back up drive or even re install OS???

Are you able to get into Recovery Mode (Command+R) at startup?
If your back up is a Time Machine back up you can boot from it by restarting while holding the Option key and select the back up drive. From there you can reinstall OS X Mavericks or Restore.

Similar Messages

  • How long does it take to delete all the files in a lost MacBook Pro?

    How long does it take to delete all the files in a lost MacBook Pro?

    Quite a while since there may be 1/2 million files or more to delete. There is only one quick way, and that is to reformat the drive.

  • HT4718 I recently upgrade my OS and now my MacBook Pro will not boot up

    I recently upgrade my OS and now my MacBook Pro will not boot up

    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I want to erase all my files on my old MacBook Pro but not lose the applications.

    I just bought a new MacBook Pro Retina.  I was to erase all my files off my old MacBook Pro and give it to my cousin.  However, I don't want to lose the programs, like Microsoft Office, because I don't have the disks to reinstall them.  Anyone know how to erase everything but not lose the applications? Or do I just go manually through each file and delete?

    What i would do is wipe the computer by going into recovery mode, then erasing the HD and formating it to Mac osx extended(journaled) then reinstall the operating system. After this is complete, just download a trial of office and enter your product key so you won't need the disk. But if you don't have the product key either then you would have to manually delete everything.

  • Help! I dropped my external HD and now my Macbook Pro will not recognize the drive. I have tried to repair the disk and that does not work. Please offer help, suggestions, something!

    I dropped my external HD on my hard tile floor and now the drive is not working properly. I have tried a repair in Disc Ultilies with First Aid with no such luck. It started to work then I got a message "Filesystem verify or repair failed" about 3-4 minutes into the first aid repair disk. When I plug in I get the disk you inserted was not readable by this computer message. Please I need help on restoring this drive!
    Its a simple tech pro drive 1TB.

    Unfortunately, a drive that has been mechanically damaged by a drop and can't be repaired using Disk Utility probably can't be fixed any other way either. The best you can hope for is to salvage as much data from the drive as possible using one of the data recovery utilities linked below, and then replace the drive.
    http://www.prosofteng.com/products/data_rescue.php
    http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    http://download.cnet.com/VirtualLab-Data-Recovery/3000-2094_4-10298807.html
    If you can't recover your most important data using one of these utilities, the only remaining hope is a data recovery service, which is very likely to cost $1000 or more for a 1TB drive.

  • Switched networks and now my MacBook Pro can not find my Deskjet Printer HELP!!!

    Just installed new router.
    I can not get my MacBook Pro to discover Deskjet Printer.
    I have tried suggestions that I found on the internet but so far nothing seems to work

    Replacing your wireless router try here.
    http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I recently updated to Mavericks, and now my macbook pro will not boot

    Last week I updated my summer 2011 mackbook pro to the Mavericks OS, Now all I get when I turn it on is the grey apple logo and the loading wheel.
    Ive tried booting in safe mode and it made no difference.
    I left it loading for about 2 hours and it managed to boot up, it then took a further 40 minutes to load after I typed in my password but then I couldn't do anything.
    Any help or suggestions? do you think if I to the genius bar they would be able to fix it?

    There's really no telling what's wrong with your machine. A trip to your local Apple Store may be warranted as they have the diagnostic testing equipment to find out if you've a hardware or software problem.
    Good luck,
    Clinton

  • I was messing around with .kext files in the MacintoshHD and now my MacBook Pro won't start up.

    I was messing around with .kext files in the MacintoshHD and moved the system.kext and two others to my desktop and deleted the originals and now the MacBook Pro won't start up. All I get at start up is the apple icon then a bunch of text shows up part of which says Mac OS version: not yet set. then the apple icon turns into the power icon and tells me to turn off the computer. I've tried reinstalling from the install DVD by holding down option when powering on and selecting the install DVD and it just goes to a white screen with the apple icon and stays like that. I didn't have the disk utility on my Mac before this happened because I deleted it to make room on my computer a while ago so I'm not sure if that's why it won't load the install DVD but anyone who knows the solution to this with out going to get it repaired would be greatly appreciated. Thank you!

    Never mind my dad just found the original install DVD and that worked. Before I was using an install disc that Apple sent me for another issue I was having, but thanks for replying so quickly and trying to help on this Thanksgiving day!!!

  • Hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    Here you can contact the developer.
    (Notice, I'm posting this line only once. Not 4 times. )

  • I have a iphone 5...I had 2k pics on it and as I kept adding more I got the storage is full message so I deleted all pics off and now I have only 300, a handful of apps and not that much music and I am getting this message again!!!! help please

    I have a iphone 5 and I used to have 2k pics on it well I kept getting the " no storage is available" message so I deleted all of them and now  I have 300 and a handful of apps and not that much music or videos and the message is coming up again..can someone shed some light on this for me? I have just about had it.

    bring it to your local apple store, they will be able to target your problem accuratley.

  • I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
    Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
    On your new MacBook Pro open "Migration Assistant" in your utilities folder.
    Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

  • I'm running Windows 7 and iTunes and the other Apple programs wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system

    I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?

    Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

  • Will installing lion delete all my files and apps?

    will installing lion delete all my files and apps? if yes, is there a way ti make sure i can get it all again? i'm new to mac and upgrading OS's

    just wanted to make sure. I'm gonna back up my things in time machine first but im new to that too (figures). can i partition my hard drive and back up my data there? and if so how would i do so?

  • Will updating my ipad delete all the files and apps i have there?

    Will updating my ipad delete all the files and apps i have there?

    Perform a complete backup before hand and all will be well.  You just restore the backup after the update.  If you have a backup password, be sure you haven't forgotten it.  The details of what is backed up differ a bit if you are outside of the states.  Read this article for details:
    http://support.apple.com/kb/HT1766

  • I upgrated for the latest version of itunes and now my Macbook Pro its 1000000 time slower

    I downloded some update for the Itunes, and now my Macbook Pro its toooooo slow, I dont know what do to anymore. I even reinstalled the whole system. Can anybody help me???

    Do the following. There's nothing of interest in the Activity Monitor data.
    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with a visit to: OS X Maintenance - MacAttorney.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Repair the Hard Drive - Lion
    Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    Suggestions for OS X Maintenance
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such asMacaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.
    If none of the above help, and they may not, then this should:
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Maybe you are looking for