Deleted condition apearing again

Hi,
I have basic price and discount conditions, also maintain condition records for both condition.
Now when I create sales order both are determined automatically,
Now I don't want give discount so I deleted discount condition from pricing item level.
Now I go to header >> Billing document >> Alternative tax class (maintained No tax), then may tax become zero but my discount condition again comming back which I already deleted.
As far as my exprience if I delete any condition in sales document that condition should not apear again(unless if I change customer or material)
But in my case if I change TAX then this discount condition apearing again.
kapil

Hi
If you want to delete the condition record,first you have to put a deletion in the condition type.Go to definetion of condition type for which you want remove the condition records-go to master data of condition type,select delete fr DB and assign with pop-up or witout pop-up and save the condition type and remove the condition record,then only it will get removed from the data base.
Insted of deleteing the condition record,you can put a deletion flag for the particular condition record.
To put a deletion flag to the condition record-open the condition record-go to details(click on magnifieng glass or click on F6) and go to controls there you can see the deletion indicator,check it and save,so taht the particular record will be deleted for the process,and when ever you want to activate the record you can remove the check box and save.
Hope it will resolve your issue.
Thanks
siva

Similar Messages

  • Delete Condition Type Depending on Item category Va01

    HI all,
    I wan to delete condition record depending on item category. I have a good link from sap.This link explains how to hide the condition but i want the  delete the condition. was badly struck here.
    http://wiki.sdn.sap.com/wiki/display/ABAP/ManipulatingPricingconditionsdisplayinSalesdocumentwithUserExit-LV69AFZZ
    Regards,
    madhu
    Edited by: madhurao123 on Mar 24, 2011 2:19 PM

    Hi,
    We had a similar requirement once, and towards the end we realised that deleteing rather than hiding it was a bad idea.
    Think beyond the scope, that if a future sales order created with reference needs this condition record; manual entry will again be dependent on your pricing procedure and is a mess.
    But if you do want to delete it; go into debugging and decide which user exit you would want to use and delete that line of the condition record from XKOMV table for that Sales Order

  • Delete condition record??

    how to delete condition record from VK11. can i have t code plz.

    Hi,
    Just to add,
    There are two possible procedures for deleting conditions. There is either immediate deletion or a deletion flag for archiving at a later date. You enter the type of deletion that should be proposed during condition maintenance into Customizing for a condition type, . When deleting immediately, a dialog box can be created which indicates immediate deletion but offers a deletion flag as an alternative.
    <b>Deletion Flag</b>
    You can mark condition records for deletion. These are then no longer taken into consideration during automatic pricing. However they remain as condition records in the system until the next archiving update. This means you can reset a deletion and reactivate a condition record.
    <b>Physical Deletion</b>
    If you use physical deletion, the condition record disappears immediately. It is no longer available during condition record maintenance or pricing. This deletion cannot be reset once it has been carried out. You have to recreate the condition record if you need it again. To be more exact, the reference to the condition record for pricing and condition record maintenance is deleted completely with physical deletion. The actual condition record must be kept for old documents.
    <b>Recommendation:</b>
    SAP recommends the physical deletion procedure. The deletion flag improves upwards compatibility in the system.
    A pricing error can occur when using hierarchical accesses in combination with the deletion indicator (See the hierarchical access documentation in the SAP library).
    The deletion flag used to be used as a replacement for a missing release procedure. This is no longer necessary, as there is now a separate release procedure available (see the release procedure in the SAP library).
    Physical deletion can be included using the change documents – for example deletions in a specific period (Report RV16ACHD).
    Hope this helps. Please reward if useful.
    Thanks & Regards
    Sadhu Kishore

  • Deletion condition types from purchase order

    Hello,
    I've got the following situation:
    1) PO had been created for one material with S price and there was three conditions, that to reflect planned freight costs.
    2) There GR have been done.
    Postings:
    Stock 10  Dt
    Price difference 6 Dt
    GR/IR     -10 Kt
    GR/IR     -2 Kt - Condition 1
    GR/IR     -3 Kt - Condition 2
    GR/IR     -1 Kt - Condition 3
    3) Cancellation of GR - 102 mvmt type:
    Stock -10  Kt
    Price difference -6 Kt
    GR/IR     10 Dt
    There were no reverse postings for planned conditions !!!!
    During the analysis of this PO, after all of this postings - i've found out  that there are three conditions, but with zero values !!!
    As i know it is impossible to delete conditions from PO after postings.
    We didn't implement any ABAP
    Do you have ideas about this accident?
    Thank you in advance.

    I can't understand you: "could you corelate the changes or are they in line wth if the condtion value was changed?"
    Where i need to correlate it? I can't see it CDPOS - i can see only the changes of the following fields:
    EKPO
    BRTWR
    EKPO
    EFFWR
    EKPO
    NETPR
    EKPO
    NETWR
    And the values there are not correlated with the values of condtions in EKBZ.
    I suppose that some condtions were in the PO after GR, but there then they were deleted (but how???!!!) and after this was cancellation of GR - we've got only reverse entires - it sounds like nonsence.
    But i have no any idea.

  • Document Deleted and Created again with diff doc. number

    Dear All,
    We are having the scenario that we have some parked documents during the fiscal year (2009) and before the yearend closing, we intend to change the new posting date (01.01.2010) for those parked documents which were created through Logistics Invoice Verification.
    When we give new posting date (01.01.2010) and make save as parked/completed, the system issues a message,"Document 5105601528 2009 was deleted and created again under 5105601532 2010".
    We need to keep the same document number 5105601528 for the next fiscal year also and do not want to generate new document for 2010.
    I request you to all please provide your valuable suggestion that how we stop the new document number for the same document during next fiscal year.
    Regards,
    Ranesh.

    Hi
    As you mentioned that you have changed the Posting Date in the Parked Document from old fiscal year to new fiscal year date 01.01.2010 , then the system will generate the Number based on the sequence available.
    It is not possible to retain the same Document Number in the next fiscal year 2010.
    Hence if you want the system to generate to the same old number, then in the new fiscal year, you shouldnt have any parked/posted document with that number.
    As per my guess, in the new fiscal year already a Document was parked/posted with the numbers 5105601528, 5105601529,5105601530 and 5105601531.And the next number in sequence is 5105601532, iey when changed the posting date of the parked document system generated ihe next available number.
    Hope you understand.
    Regards
    Venkat

  • Delete condition type records from PO

    Hi all,
       I have put custom fields ( for condition type ) under customer data tab in PO (ME21N) line item.
    While creating/changing PO, I have to delete condition records under conditions tab based on the custom fields which I have defined in the customer data tab.
    Is there any badi or function module to delete required condition records in PO?
    Thanks in Advance.
    Udaya Madhav

    Hi uday,
    Please Use the FM
    RSDRD_SEL_DELETION
    Hope this will be Helpful
    Thanks
    kalyan

  • Is their any function module for deleting condition record i am trying

    Hi Experts,
    Is their any function module for deleting condition record i am trying  this way.......
    DATA: TABLE (4) TYPE C.
    DATA: KNUM LIKE KONH-KNUMH
    DATA: K_VEWE LIKE T681-KVEWE VALUE 'A'.
    DATA: T681_STR LIKE T681.
    DATA: LV_NUM TYPE I.
    GET PARAMETERS
    PARAMETERS: TABNO LIKE T681-KOTABNR.
    PARAMETERS: TESTMODE DEFAULT 'X' AS CHECKBOX.
    REFRESH INT_KNUMH.
    Select single * from T681 into T681_STR
    where kvewe = K_VEWE AND
    KOTABNR = TABNO.
    IF SY-SUBRC NE 0.
    WRITE: / 'No entry in T681 for number ', TABNO.
    WRITE: / 'Check whether corresponding condition table exists.'.
    EXIT.
    ENDIF.
    TABLE = T681_STR-KOTAB.
    SELECT KNUMH FROM (TABLE) INTO KNUM.
    SELECT SINGLE * FROM KONH WHERE KNUMH = KNUM.
    IF SY-SUBRC NE 0.
    INT_KNUMH-KNUMH = KNUM.
    COLLECT INT_KNUMH.
    ENDIF.
    ENDSELECT.
    DESCRIBE TABLE INT_KNUMH LINES LV_NUM.
    IF LV_NUM EQ 0.
    WRITE: / 'No inconsistent entries found.'.
    WRITE: / 'Each record in the condition table has a corresponding.'.
    WRITE: / 'entry in the KONH table.'.
    EXIT.
    ENDIF.
    LOOP AT INT_KNUMH.
    IF TESTMODE IS INITIAL.
    DELETE FROM (TABLE) WHERE
    KNUMH = INT_KNUMH-KNUMH.
    IF SY-SUBRC = 0.
    WRITE: / 'KNUMH =', INT_KNUMH-KNUMH(10), ' deleted from table ' ,TABLE.
    ELSE.
    WRITE: / 'DELETE: SY-SUBRC is', SY-SUBRC , ' FOR KNUMH = ' .
    WRITE: INT_KNUMH-KNUMH(10).
    ENDIF.
    ELSE.
    WRITE: / 'TESTRUN: KNUMH =', INT_KNUMH-KNUMH(10).
    ENDIF.
    ENDLOOP.
    is their any Standerd Function module  for comparing  tables if the condition record not exist in it has to exit if it is their then compare  those two tables if not exist in one table also that has  to be delete  the condition record
    Please let me know .....

    Hi,
       You can use Function module PRICING_CHECK to check condition record. Do a where-used list on it to see how to call it.
    Regards
    Kiran Sure

  • Delete Condition Records

    Hi,
    I have a requirement to delete condition records. Please let me know if there is any BAPI or Function Module which deletes the condition records from VK12. Its very urgent.
    Thanks,
    Meenu

    Meenu,
    Use VK12 and set the deletion flag.
    The deletion flag means that the record is logically deleted and not phisically.
    some of the conditions records cannot be delete, example 'MWST'.
    In such cases, the best way is to change the end date to the current date.
    more adding for you;
    In v/06 for your condition type check the field delete fr. DB
    If you set this field as A or B,then only you will be able to delete the condition record permanently via VK12.Otherwise you can only set deletion indicator.
    Amit.

  • Deleting conditional build expressions

    I have created a project in RH7 and it has expanded to become
    our company's single source for user documentation. This is a good
    thing. However, as I've added information for different audiences,
    I've ended up with a number of conditional build expressions that I
    no longer need. I'd like to delete them so I don't have to search
    through a long list on the WebHelp General screen.
    I've searched the forum and don't see any information about
    deleting conditional build expressions (tags, yes; expressions,
    no). Can anyone tell me how to do this?
    Thanks for your help!

    Dear Mr. Grange,
    Forgive me for resurrecting such an old post. In your reply you state: "any layout that contains the build expression). By 'layout' do you mean the topics?
    Thank you in advance for your assistance.

  • How to delete conditions in PO

    Hi Expert,
    How can i delete conditions like ZCSC,ZCSL and ZCSD in PO? I don't want to have those conditions in my PO. Please guide.
    Thanks.

    Hi,
    you probably won't be able to  delete the condition                
    types you mentioned from the PO conditions, since these are part of the calculation                   
    schema assigned to the PO. When price determination is run, the system                  
    finds the schema assigned, and goes through each step number to see                     
    if a valid condition record exists for the condition type. If
    you have a condition record somewhere for these condition types. After                    
    pricing determines the value, you can then go ahead and change them                   
    manually to whatever you want, including zero and save the PO on the condition screen in ME22N.                                                                               
    If you don't want anything determined for these condition types, you can                  
    set the condition records themself for deletion. From the condition                        
    screen in the PO, you can select the condition type, and click the                      
    button display condition record. That should help you to find it. You                   
    can also use the analysis button. This will show you the schema, and                    
    results for all condition types in the schema. You can display the                      
    condition record  from here as well. Then just go to where                      
    it's maintained and set for deletion.                                                                               
    Deleting them from the schema itself is maybe not a good idea. This could lead                  
    to inconsistencies when you still have open PO items to which this                      
    schema is assigned.       
    Regards,
    Edit

  • " Cannot Delete iCloud Account - There was a problem deregistering this iPhone with iCloud. Try deleting your account again"! i can't sign out my icloud account

    I want to sign out my icloud account but I can't. When I try sign out, I received notification " Cannot Delete iCloud Account - There was a problem deregistering this iPhone with iCloud. Try deleting your account again"

    Backup to computer first and sync Apps to iTunes first!
    Restore in recovery mode will work, be persistent and retry
    Recovery restore challenges
    - computer didn't detect recovery iphone, attempted and failed 3 times
    rebooted computer then recovery restore worked
    - recovery restore was successful, unlocked, and iMessage/Facetime, Find My Iphone, ALL WORKS!
    Restore from backup challenges
    * Make sure you have plenty of harddrive space!
    - have to restore first then restore from backup, i did this incorrectly by restoring from backup and the find my iphone feature got stuck forcing me to recovery restore
    - each restore from backup attempt will copy the original backup and create another backup folder. My original was about 10gb, so it copied another 10gb onto my computer's harddrive
    - when i restore from backup, my computer ran out of space and errored out/failed.
    - I tried again to restore from backup then figured out where the backup data folder was and tried to transfer to external harddrive but not quick enough and failed again.
    - finally cleared the extra backup data files and restore from backup was successfull
    Missing apps from restore from backup
    - Downloaded all my missing Apps from APP store
    - I have 300+ apps and there are only 15 screen scrolls, have to organize before apps will populate and load, very difficult to organize now. Wished I had sync Apps first.
    Conclusion
    This process took me literally 20+ hours to correct and will probably take me few more hours to organize the apps into their respective folders...
    At least I got everything to work. Hope this helps!

  • "Found Partially Deleted Backup - Trying Again to Delete"

    Has anyone encountered a message like this in system.log? If so, any suggestions as to how to find and delete the problem "partially deleted backup?"
    /System/Library/CoreServices/backupd[443]: Starting post-backup thinning
    com.apple.backupd[443]: Found partially deleted backup - trying again to delete: 2007-12-01-211848
    Time Machine has been stuck displaying the barber pole of doom for two hours, with the accompanying message "Finishing backup..." It appears that TM is choking on a backup that was for some reason only partially deleted earlier (probably when I forced a shut down after a couple of hours of similar nonsense with TM). FWIW, my TM disk is an internal 1 TB SATA drive with over half the space still free.
    Cheers!

    Hi Barry:
    Thanks for the suggestion. I hadn't realized that I could navigate the Time Machine disk that way.
    I deleted the offending folder, and then emptied the Trash. Interestingly, this caused the same "churning" sound from my hard drive that I was getting when Time Machine was stalled. The Trash was taking a long time to empty, and it occurred to me that the problem might be related to Compost, a utility that I installed to keep my Trash at a manageable size. So I stopped Compost, my Trash then emptied out quickly, and I assumed that all would be well.
    Well, not quite. I restarted TM, it ran a quick little backup, and then according to system.log it began the post-backup thinning. TM promptly stalled with the barber pole of doom, and the hard drive churning sound resumed. I'm getting the following message repeating endlessly in system.log:
    Dec 3 17:02:42 macpro kernel[0]: HFS resolvelink: can't find iNode3324704
    Dec 3 17:03:06 macpro kernel[0]: disk3s2: 0xe0030005 (UNDEFINED).
    Dec 3 17:03:06 macpro kernel[0]:
    The message appears every 20 seconds or so, and after a few of the same messages the iNode number changes. I've Googled the error message, but didn't find anything that would shed light on what it means. I'm going to leave TM running for a few hours to see if it eventually works its way through these errors. If not, then I'll probably just erase the **** drive and start again with a fresh backup.
    Cheers!

  • Vbof deleted conditions

    Hi Gurus,
    I have created a rebate with two conditions. Then I have created the invoice and when I went to the conditions analysis they appear in it.
    Then I run the VBOF just because, or because a change in the rebate such as a rate in the accrual column was done.
    The VBOF result shows the following
    billDoc           item  cond type  cond bval  unit  Amount %  cond base value  curr  agree  curr  message
    90000XXX old   10     YRXX              400-  USD   100      %      400                USD  80     USD     *
    the message is : "condition deleted"
    By my surprise, after running the VBOF and going again to the invoice, both rebate condition were deleted from it!!!!!!!!!
    If a cancelled the invoice through VF11 and create the invoice again, both condition appears once more.
    I have applied note 456458 and put S136 structure as syncronious 1
    Can you help me please?
    Thansk
    Jessica

    Hi Jessica,
    The message "condition deleted" in transaction VBOF is consistent with the deletion of the rebate condition in the billing document.
    This happens for example when the period of the billing agreement has been changed and the rebate is no more valid for this billing document.
    If you run VBOF and you get message "condition inserted", then in the same way, the rebate condition gets inserted (physically) in the billing document item pricing screen.
    This is standard functionality.
    What is not correct is to have the rebate agreement taken in account when creating the invoice and to have the condition deleted if you run VBOF just after, without changes in the agreement (that would be changes in the agreement period or the accruals value for the rebate condition).
    Are you sure it is the case? The VBOF transaction by default only runs for modified agreements, so something must have changed.
    Regards,
    Franck Lumpe
    Freelance SAP Consultant

  • To enhance 0EMPLOYEE master data attributes, need to delete and load again?

    Dear Support,
    In order to meet business intelligence demands, I had three more attributes (region, time rate and worksite) to 0employee time dependent characteristic.  The datasource to load 0employee attributes and its structure were enhanced to fill the new fields.
    After first load, 0employee master data could not be activated. So I deleted 0employee master data, what I couldnu2019t do without deleting its data from transactional HR infocubes. I deleted transactional data and afterwards master data. I load it again and activated, with no errors this time.
    This occured in development system.
    Changes are about to go to production environment and deleting almost all transactional RH area infocubes and 0employee master data is something that we all want to avoid.
    I am asking if there is a workaround in order to solve this without doing the stated time and resources consuming task.
    Thanks in advance for your help,
    Best Regards,
    André Oliveira

    Hi Andre,
    You should be able to do a full load to achieve this. No need to delete the data. If there are corrupt data in BI with overlapping time periods, fix it by maintaining the master data. If corrupt data comes from source fix it in PSA.
    Also you can specify to load the data for a time range only which might be easier than to load all history.
    good luck,
    vijay

  • Delete condition records in VA01

    Hi,
       I am trying to write a BDC for VA01. There are SOME(not all) unwanted condtion records comming. how can i remove those condition records (Goto - > Header - > Conditions) thru BDC.
    Regards,
    Naveen Vishal

    HI NAVEEN,
                    goto vk12,choose the condition types which you dont want to be in the sales order,select the line and delete the condition record and save.
    you have to delete all the access sequence condition record for that condition types.
    then it will not appear in the sales order,
    but the best way is to do it in the configaration settings in v/08
    regards
    senya

Maybe you are looking for