Deleted emails found when using new search function in 3.0

When I do a "search iPhone" I see a list that contains emails that were deleted, some as old as two months. These found emails do not exist in my Comcast account, and they were deleted from Trash. I thought I was not storing any emails on my iPhone, but I can actually call them up.
How do I get rid of these "deleted" emails?
I hope this hasn't been covered too much already, but I could not locate a thread.

I too have done some search's today in the new search function and found deleted e-mails. I use bigpond for e-mails and they get sent to my phone. I then delete them from my phone and trash box and delete them from my e-mail. Using my computer and bigpond my e-mail account has 33 e-mails that I can find. Doing a search on my phone with this new sortware update I can find 870 e-mails which I believe date back to december last year when I got the phone. Some e-mails are VERY sensitive business wise and deleted as required at the time. But if a work person was to pick my phone up they could do a complete search of all my emails without the requirement of a password. If I let someone make a call on my phone, they can get to all the emails that have ever been through my phone within seconds if they choose. A patch or update is needed!!! This fault would hinder business from wanting to use Iphones.
Is there a way to fix this? and how soon?

Similar Messages

  • Certain LinkedIn functions are not working. Browser keeps on looping, for instance when using the search function

    I go to LinkedIn and type in a name in the search box, for instance "Peter" and hit enter.
    Normally, this will return with a list of people with the first name "Peter", listed according to degrees connectivity.
    Instead the web site never loads the next page. It appears that it keeps loading the page over and over again, but with no result.
    In the end I have to press back or use another browser (Safari) to load the page and use the search function.

    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    1. Bypass Firefox's Cache
    Use Command+Shift+r to reload the page fresh from the server. Any difference? If not...
    2. Clear Firefox's Cache Completely
    Edit > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    3. If needed, remove your linkedin.com cookies
    While viewing a page on the site:
    Tools > Page Info > Security > "View Cookies"
    Remove each cookie then try reloading the page. You probably will need to log in again. Does that help?

  • Stack overflow at line: 1792 or 1788 when using the search function

    Hello everyone,
    My name is Thibault. I am a technical communications specialist. I've been using Robohelp html for a couple of years.
    I am working on the user guide of the software application developed where I work.
    This is a HUGE project, more than 6500 pages.
    We're two technical writers on this project. (This is an inportant detail since my colleague doesn't get the problem).
    I need your help because I have been having an annoying issue over the last couple of days.
    After the project is generated, I open it in the software, clicking F1.
    When I want to use the search function I have this error message displayed:
    "Stack overflow at line: 1792" or "Stack overflow at line: 1788"
    Do you know where this could come from?
    Furthermore, I noticed that this stack overflow only occurs on some words.
    I mean, it occurs for the most used words in this project.
    We have customers all over the world and over the last week, we've been getting a lot of feedbacks about this error message.
    I hope someone will be able to help me on this one!
    Thanks in advance!

    First of all, thanks for your answer RoboColum(n).
    Is the problem only when you search for a topic that contains Flash output?
    All my topics contain Flash outputs. I generate my output files on a folder that is embedded into the software.When in the software, I click F1 and the Flash User Guide opens.The search function works (or not) depending on the software version (32/64-bit).
    At what point exactly does the stack overview occur?
    We have two versions of the software a 32-bit version and a 64-bit version.
    The search function works fine with the 32-bit version.
    The problem occurs when I use the 64-bit version. When I type in a word, for example "unit", the stack overflow message appears. See below:
    As you can see, it looks like the search function freezes while the stack overflow message appears.
    And I never get this error message with the 32-bit version of our software.
    I also wonder whether you can search on a project that contains no Flash output. Perhaps you could try for us?
    What do you mean by that?
    As I told you previously, my Flash Player version is a 32-bit one.
    Do you think that the issue might come from there?

  • Workaround: SWVMS16 Crash when using Camera Search Function

    When using the camera search functionality, SWVMS16 may crash.  The issue is caused when non-camera UPnP devices on the network send out large packet sizes.  Upcoming video monitoring releases will fix this issue.
    Workaround: If the issue occurs, add your cameras manually to the SWVMS16.
    SWVMS16 v1.21 Release Notes posted online.
    http://www.cisco.com/en/US/docs/security/csbvsc/swvms16/release/notes/Release_Notes_VMS.pdf
    Attached file shows the error message and the steps to manually add cameras to the SWVMS16.

    Hi agschin and welcome to the RH forums. The hhactivex.dll
    file is not used by the search function so you can rule that our.
    Have you tried recompiling and seeing if the problem still happens?
    You can also start the Bug Hunter feature in RH - View > Output
    View and then select the Bug Hunter button - and see if that throws
    up any clues.

  • Premiere project timeline strobing when using windows search function..

    Hi, I've been noticing a weird issue with Premiere and locked layers strobing/flickering on screen (on the actual timeline). What seems to set it off is if i have a project open, and then go into windows explorer and run the search function on a folder (searching for .avi's or .jpg's or whatever). Once windows starts searching (and after it stops as well) when I go back into Premiere everything starts flickering (most noticeably on the diagonal lines on locked layers in the timeline). It makes it almost impossible to scroll through your project with the flickering, and the only way to fix it is to shut down Premiere and restart. Has anyone else experienced this?
    Yeah, I'm running on Windows XP Pro 64bit, and i'm sure that 'might' be the reason for it, but thought others may experience this as well on other Windows OS systems.
    I've run this on two computers and experienced the same issues:
    Computer 1:
    Intel Core2 Duo CPU - E8400 @ 3.00Ghz
    8 GB RAM
    NVIDIA GeForce 8800 GT (latest drivers)
    Windows XP Pro 64bit
    Computer 2:
    Intel Core2 Quad CPU - Q9550 @ 2.83Ghz
    8 GB RAM
    NVIDIA Quadro FX 1700
    Windows XP Pro 64bit

    hey... yeah I've updated all my drivers. I was actually having this same problem in general with my old NVIDIA drivers back in January (with any locked layers in Premiere). When there was an updated driver released, it appeared fixed. It only comes up now if I do a windows file search as I mentioned before.
    Maybe it is a NVIDIA graphics card thing?? Anyone else with this issue?

  • Deleting emails automatically when using a POP email

    Hi
    Is there a way of deleting any emails automatically from my POP email when i've deleted them in mail on my iphone 4?
    I have my email set up correctly with push switch to on and everything else seems to sync up fine, but when i log into my webmail account or Outlook on my laptop the emails that i've deleted on my iphone are still listed in the inbox as unread.
    Any ideas anyone?
    G

    There are settings in your mail configuration to delete when ... One option is to say delete when removed from Inbox.
    Thus when you delete it, then the NEXT check of mail it will let the server know to delete them.
    Have to remember, POP was not designed for todays world of mobile devices and checking in multiple places. It was a basic protocol for people to check from one place.
    Consider using IMAP if your service allows it.

  • When using the search function in mail I only see results from the current year. how can I see results from all years?

    When searching mail results only contain messages from the current year. I'd like to see results from all years. This just started after upgrading from Snow leopard to Lion.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Mail 8.0 deleted email content when using mail drop

    Using Mail 8.0 on Yosemite 10.1 I just spent a very long time answering an email. I attached a PDF of 30 MB before sending and the window to say it would be sent via mail drop appeared. I clicked Yes.
    Later I checked sent messages to see the email I wrote and make sure it all went through OK. However, in the email only a link to the mail dropped PDF was there, and all the text I wrote had disappeared.
    Nothing in sent, or saved boxes. It's a Gmail account, so I checked sent messages from the web interface for Gmail  and also there was just the link.
    I did a test and sent another email with said attachement and some random text, and it came out ok, it even had a fancy download button rather than some super long link.
    What is going on? can I get my email back? Please help!

    I've had - and am having -- all kinds of problems with Mail 8.0.  Is there an update yet to fix the many, many ISSUES with 8.0?
    I am ready to ditch the program unless fixes are forthcoming.

  • When using spotlight search on my 5s it will not show past text messages that haven't even been deleted even if I type a specific word that I know is in a message I want to search for. I have message search turned on in the spotlight settings.

    When using spotlight search my phone will not show all text messages with a common word even though I have not deleted any messages from my phone and I have the message search turned on in settings under spotlight search. The search only shows the messages that are recent within the past day or so. Why won't it show the other messages when I search for them even using a specific word that I know was in the message I'm searching for.

    Hello ChiomaM,
    It sounds like you are not getting notifications for new text messages that are coming in, and you must manually check the app. I recommend checking the Notification settings to see if they are configured correctly:
    iOS: Understanding notifications
    http://support.apple.com/kb/ht3576
    iOS apps can provide three types of notifications:
    Sounds: An audible alert plays.
    Alerts/Banners: An alert or banner appears on the screen.
    Badges: An image or number appears on the application icon.
    You can view which apps provide notifications and adjust notification settings using Settings > Notification Center. For additional information, refer to the user guide for your device.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Using the search function in PP CC

    Using the search function in PP, can the newest software create a new bin with ALL clips the search finds, instead of just one-by-one?   I know PP isn’t FCP7, but FCP has a simple function when searching... put in the search parameters, it searches, finds clips, and asks if you want to create a new bin with those clips.  Click “yes” and all found clips appear in the new bin.  Wonderful!    So can the new PP now do this?  I can’t seem to find out, so I’m asking the community.  Thanks in advance for advice.

    Hi friedlanders -
    It looks like AND and OR work, as follows:
    "online help" AND "system"
    "online help" OR "system"
    I don't see how to make NOT work, though.
    G

  • TS3989 Can you use the search function in a shared photo stream? How?

    Can you use the search function in a shared photo stream? When I try to search in the shared photo stream it goes to search in my photos.

    I'm not sure there is a solution to your question, other than to not keep so many photos on your devices.  If you delete a photo from photo stream, it will delete it from all your devices.  To keep them, first save them to your camera roll (tap Edit, tap the photos, tap Share, tap Save to Camera Roll), then import them to your computer as explained here: http://support.apple.com/kb/HT4083.  However, given the number of photos you have, a much more practical solution would be to transfer them to your computer using an app like PhotoSync, which will select them all at once and transfer them over wifi.
    I'm not sure why you're seeing such a discrepancy in the amount of space taken up by your photos.  It's possible that something is corrupt given the large number of photos on your device.

  • How do you stop needing to verify email password when using yahoo.att with Mac Mail

    How do you stop needing to verify email password when using yahoo.att with Mac Mail?

    Nevermind, I fixed it (I think).  I went into Settings | Accounts & Sync and found Yahoo at the bottom of the list (alphabetically).  I selected it and it had an optiion to delete the account, which I did.

  • TS2755 I receive message prompting me to enter apple ID password when using normal phone functions. I can cancel and still use phone but, how do I get this to stop coming up?

    I receive a message prompting me to enter apple ID when using normal phone functions, if I cancel I can still use phone but why does this keep coming up and how do I change that to only prompt if I want to access apple?

    Search the forums before posting please.  Your question has been asked and answered dozens of times already.
    Settings --> Store --> Apple ID

  • Untrusted connection Error when using google search field in top line. Ok with other search engines

    When opening www.google.dk and searching from the page, everything is ok
    When using Google search engine in the address line search bar the error is present
    When changing to Yahoo, bing or another search engine in the search bar, the error is not present
    So, the error
    "www.google.com uses an invalid security certificate.
    The certificate is not trusted because no issuer chain was provided.
    (Error code: sec_error_unknown_issuer)"
    is only present when using google search engine in the search bar
    Have tried to delete the files cert8.db and key3.db with no success
    Read about firewall settings, but Bullguard firewall was not covered

    In your "More system details" it says your address bar search provider is Babylon, not Google. Perhaps that's the problem? Or are you using a shortcut to force the address bar search to Google?
    This add-on will reset your address bar search to Google: https://addons.mozilla.org/firefox/addon/searchreset/
    That might not stick if you have an add-on which reverts the setting. You can disable nonessential and unrecognized extensions here:
    orange Firefox button (or Tools menu) > Add-ons > Extensions category
    Also, you might need to edit or delete your user.js file to prevent your settings from being overridden at the next startup. This article has info on that: [[How to fix preferences that won't save]].
    Any luck?

  • Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces'

    Hi all,
    I know that I can delete anchor points but I was wondering if there is a shortcut to do it on a larger scale.
    Can you automatically delete anchor points when a new image is placed on top - so that it 'replaces' the image, only on the parts obviously that you cover with the new one.
    Thank you all

    Hi,
    I'm using CS6, and I have a tree vector image, and I am trying to put names on top, but when I do this to keep it clean with no anchor points (as my other software cant read it with all the points in it) I have to manually delete each one but it deletes the whole path and I then end up with a tree, names on top, and a big gappy circle around the names.
    So really, I wanted to add the names on top, and have that delete all anchors underneath .
    Does this make sense? :S

Maybe you are looking for