Deleted files on FiWi-disk does not show in Recycle bin

I'm using FireWire disk for storage and stuff. I just discovered that if I move files to Trash, they don't get there.
I'd like them to - how do I fix that?

what exactly happens when you trash something from that drive? do you get a popup saying that it will be deleted immediately?

Similar Messages

Css-file on Romote Site does not show changes

hello
I use Dreamweaver CS4 on Win7 64bit system.
I have a new website in construction and today the developer made changes to the Style.css file. Made the changes on an other computer and not in Dreamweaver.
Now, when I open the Style.css file from the Remote Site, it does not show the changes that were made. However when I delete the Style.css file in my Local Files directory and copy the Style.css file from the Remote Site to the Local Files and open it from the Local Files in Dreamweaver, it shows the new file with the changes that were made. But the Remote file keeps showing the old data.
I took several steps to try to eliminate this problem. Closing Dreamweaver and deleting the Configuration folders in Users>[NameUser]>AppData>Roaming>Adobe>Dreamweaver CS4> Both in en_US and nl_NL, although the latter did not contain any files.
This did not work. Deleted the Style.css file on my Remote Site and uploaded it again from my Local Files. Nope. Still shows rthe css-file with the old data.
Anybody any idea where Dreamweaver gets these old data from and how to make it work differently?
greetings, Lex van de Oudeweetering

Hello Ken
I did not say my page is troubled. The trouble is that the style.css file opened from the Remote Site in Dreamweaver shows the wrong data, but in effect has the right data, because when copied to the Local Files and opened from there it shows the right data.
The link to the page/site in construction is http://www.lex-illustrator.nl/lexillus
And I have made screenshots of the opend css files and assembled them beside each other.
On the left opened from the Local Files and on the right side the same css file opened from the Remote site.
The orange dots indicate where they differ, the green ones the items that were changed today. So it's not a problem of only today.
http://www.lex-illustrator.nl/2xcss.gif
And I have to say I had issues before with updating files to the Remote server and how Dreamweaver shows them. Much of the times I have to delete the Remote file first to get it dispayed right if I check if it has worked by trying to open it from the Remote server.
So it's not only limited to this site under construction. It looks like a Dreamweaver thing to me.
Greetings, Lex

External hard disk does not show in finder

WD usb external hard disk does not appear in finder. Disk utility sees it and will mount/unmount and eject. I ran repair disk util. and all is well but still does not appear in finder

Hey Hatter, Thanx for the input.
Among other things I tried was a terminal routine someone suggested with no luck and new drivers/firmware for the drive, again, no luck.
I still don't know for sure what caused my problem, but I re-partitioned the drive and re-formatted it and that seemed to solve the provlem. Sadly, I lost all my info that was backed up on that particular drive but hopefully it won't come back to bite me later.
Cheers!!

Files copied as .lnk files to usb and does not show up in Windows

When I copy files from the MBP to a USB disk, instead of copying the files as is, the Mac converts the files into a .LNK file, which then shows up as "shortcuts" rather than the copied file in Windows. Why is this?

same here.. it happened after installing Lion and updating iTunes
My nano does not appear on iTunes or desktop, however it charges.
iPod nano 2nd Gen
Mac OS X Lion 10.7
iTunes 10.4
please don't tell me that Apple added my lovely nano to Black list !!

10.2.8 installation and external hard disk does not show on desktop

I just reinstalled OS X 10.2 (by erasing the hard disk during installation) and upgraded with the Combo pack to 10.2.8 . This is an iMac G4 1GHz with a 17-inch display. I tried connecting a Western Digital MyBook with 500Gb through both the USB port and through FireWire. In both cases the hard drive does not appear on the desktop BUT does appear in the Disk Utility program and in the System Information window. Finder, therefore, doesn't display the drive. The MyBook drive is formatted to Windows FAT 32. Before I reinstalled OS X 10.2.8, this machine was running 10.3.9 and the drive did appear (I'm still searching for the 10.3 disk).
Is this an issue with OS X 10.2.8? Given the drive is detected by the System Information section and by the Disk Utility, is there a way of forcing Finder to display it (and allow access)?

Sometimes I have found that I have to turn of the ext. hd and then reconnect the firewire cables. there is a cylinder that is an inch away from one of the firewire plugs, which should be connected toward the tower and the other firewire plug toward the ext. hd. have patience, sometimes it will show up. also a restart maybe...

Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

Hard disk does not show in finder

WE had a system failure with our server instance a month back and since then, one of my internal HD's will not show in finder. It's also causing carbon copy pro to fail when trying to find it. I have verified it can be seen in the disk utility and from a terminal prompt. I rant this to confirm:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
No matter what I do, i cannot see it. Verify and repair in disk util come up saying it's okay. I have selected show HDD's in finder preferences. A possibly related side effect is that my users, who can browse this over the network, cannot search in the directory.
Any help you can lend would be helpful.
OSX version 10.8.4
TC

Not partitioned - part of a raid. Was initially formatted, yes. THis has been in production for a couple of years and just dropped out. "THIS DISK" is the disk that vanish. I renamed it for forum purposes.
Results:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS basecampHD              999.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:                  Apple_HFS HD2                     999.9 GB   disk1s2
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS THIS DISK               1.5 TB     disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk3
   1:                        EFI                         209.7 MB   disk3s1
   2:                  Apple_HFS TTHIS DISK.Backup        1.5 TB     disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:        CD_partition_scheme                        *217.8 MB   disk4
   1:              CD_ROM_Mode_1 TSIXL-320W              189.7 MB   disk4s0
/dev/disk5
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *3.0 TB     disk5
   1:                  Apple_HFS ServerTime              3.0 TB     disk5s1
No CoreStorage logical volume groups found

Browsing for file in icon mode does not show all files and folders.

When in Illustrator and I select open, the preview pane does not arrange the files to fit the window size. This does not happen in list mode but in icon mode. I can't see all the files and folders because they are outside of the window and I can't scroll to the right to see them.

Yosemite, right?
Don't use anything other than list view. It's all buggy.

USB Hard Disk does not show up

If I open Airport Utility and go to Base Station-->Manual Setup-->Disks, I can see my Maxtor Hard Drive. However, I do not see it on my desktop or in the Airport Disk Utility. Is there something I need to do to access the hard disk? I gave it a password during the initial setup, but I cannot even see the drive anywhere except in Airport Utility.

Yes I did, but the problem was actually just solved by simply shutting my MBP down and restarting. For some reason it wasn't showing up, but now it does. Thanks for the help though. I do appreciate it.

How to delete an iphone contact that does not show up in the address book

hello--
i am a new iphone 4s user and i had a quick question that i have not been able to find an answer to.
when i am using imessage, there are a few contacts that come up as options but yet they are not located in my address book or contacts list-- they are simply only an option when creating a new text imessage.
i would like to delete these contacts from the imessage list of options because they are numbers that i no longer need but i am not able to delete them.
someone please help me fix this problem so i can get rid of these contacts and not send any messages to them instead of the actual correct person!

Do you see any exceptions listed?
* Tools > Options > Security: Passwords: Exceptions
Do you see any empty entries in the Show Passwords window?
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
*http://kb.mozillazine.org/Password_Manager

Disk does not show in /dev/dsk or /dev/rdsk

Is there some command I need to execute to get my disks to show up?
It is a virtual disk created in a logical domain. This is the guest server and at the ok prompt a devalias shows the disk. It also shows up in :
../../devices/virtual-devices@100/channel-devices@200
on the guest server but not in /dev/dsk or /dev/rdsk

Depending on the guest solaris version, you may need to do a reconfiguration reboot for it to show up.

File sharing in apps does not show

When connecting my Ipod Touch 2nd Gen in Itunes10/Windows, I cannot share files with my apps (fast reader, e.book). The window for file sharing simply is not there!

It should be device > apps tab > scroll down > file sharing area. What do you see below the app organization area when you scroll down?
tt2

Airport Extreme used as access point. External disk does not show up in Finder

The title pretty much sums it up. I'm using my Airport as just an access point. I connected an external disk to it. The disk shows up in the Airport Utility, however I cannot connect to it because my Airport has never shown up in Finder. I went to preferences and checked Connected Servers, still no go. Any advice?

A few things to check:
The drive must be formatted in Mac OS Extended (Journaled), or FAT32
Since the USB port on the AirPort Extreme is under powered, you almost always have to use a powered USB hub when connecting a hard drive, even if the hard drive has its own power supply
When locating the disk on your Mac, open Macintosh HD or the Finder and look for the AirPort Extreme icon under the SHARED heading on the left side of the window.
Click on the AirPort Extreme icon and a folder will appear to the right representing your drive
Double click the folder to mount the drive on the desktop

File's Owner does not show methods in Interface Builder 3.2.6 but the class is set correctly and the nib on the lower left is green

Hi, I'm trying to make my first IPhone app. After having problems with interface builder the first time I coppied the code directly from a tutorial in case I made any mistakes. I saved the program, and re-opened the .xib file. Right clicking File's Owner does not show a list of methods. I've been looking around for solutions for this but have not gotten anything to work. I tried deleting the default .xib and creating a new one through file-> new file. This did not help. I did notice that File's owner was showing up as a light blue cube apposed to a yellow one now and found that a bit odd but otherwise nothing changed. I opened the library menu and selected helloWorldiPhoneViewController so it would show up in the view port. I set the class field of File's Owner to hellowWorldiPhoneViewController. File's Owner still does not show methods when right clicked or when a line is dragged over a button. I read somewhere that the color of nib on the lower left of the viewport may indicate a problem, but it is green not indicating any issue. Every solution I found for someone else seems nto to work for me and I don't know how to continue.
here is the .h file just in case:
// HelloWorldViewController.h
// HelloWorld
// Created by Paul Peelen on 2011-03-14.
// Copyright 2011 9697271014. All rights reserved.
#import <UIKit/UIKit.h>
@interface HelloWorldViewController : UIViewController {
UILabel *textLabel;
@property (nonatomic, retain) IBOutlet UILabel *textLabel;
- (IBAction)changeTheTextOfTheLabel;
@end
I'm trying to connect changeTheTextOfTheLabel to a button and textLabel to a label

You need a parameter for an interface builder method. The type should be id and the name is typically "sender". It would look like this:
- (IBAction)changeTheTextOfTheLabel: (id) sender;
Be careful about those tutorials. Many are ancient and do not correspond to current Xcode behaviour.

ITunes 10.6.1 update does not show newly imported music in viewer but files are in iTunes media folder, how to correct?

Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!

Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery.

Deleted files on FiWi-disk does not show in Recycle bin

Similar Messages

Maybe you are looking for