Deleted my /boot dir!! please help

I have been running arch64 0.8 for a few months now and have spent a long time tuning everything jsut the way I like it. Now the problem is I have just removed my "/boot" dir and of course it will no longer boot! I tried to fix this by running the arch installer, mounting my partition as /mnt and then re-sintalling grub and the kernel. This almost worked as the PC now boots but then hangs after loading Udev. I think this is becuase I had various things like ndiswrapper on boot which the fresh kernel does not have.
Anyways I'm desperate to re-create my /boot folder so that I can boot back into my system. Can anyone help? I do not have a backup.

Remember to not run as root unless you absolutely have to

Similar Messages

  • My Iphone 4s Will not delete the songs I want it to. I've tried Turning off "Show All Music" and then swiping left on the song to delete it, but it wont give me the option to delete the songs. Please help. (this is iOS.7 btw)

    I've tried Turning off "Show All Music" and then swiping left on the song to delete it, but it wont give me the option to delete the songs. Please help. (this is iOS.7 btw) It only does this for some of the songs, but the rest of them I can delete. This is really annoying, please help me ASAP. Thank yall for your time

    I've tried Turning off "Show All Music" and then swiping left on the song to delete it, but it wont give me the option to delete the songs. Please help. (this is iOS.7 btw) It only does this for some of the songs, but the rest of them I can delete. This is really annoying, please help me ASAP. Thank yall for your time

  • Satellite m300 won't boot! please help!

    Hi,
    I've got a bit of an issue here.. I have a Satellite m300.. a white one..
    and it won't boot... I've had this very issue before but it turned out to be an external USB HDD that stopped it from booting up but now even with everything removed it still won't boot.
    And it was fine until yesterday, it just gave up.. I am away from home for work so I have all the work stuff and unfortunately without my recovery cd, but my guess is that it won't even read it..
    So this is what happens..
    turn on..
    all light come on.. including power and all the white lights around the keypad..
    and then maybe 5 sedconds later caplock and numlock(?) green lights flash..
    then it's a dead still.. no HDD activities or sound.. just dead quite..
    the screen remains black blank through out..
    it seems to get stuck here before reaching the post screen.
    i thought the power button usually took more than just a push to turn off? it instantly swithces off with a single push of the power button..
    I think this laptop is like on sleep or something and can't seem to wak up.. maybe?
    And it has vista.
    Please help.. I have some important work files I need to recover at least before formatting..
    and that has to wait till I get home which won't be for a month or so..
    which also lets me take it back for warranty as well..
    any help appreciated!!!
    cheers,
    Min

    Quote
    Originally posted by syar2003
    If running a LCD display with DVI connection , try to hook it up with
    an analog VGA cable.
    Can also be that the motherboard fails to initialize the vga AGP card.
    Turn off all power incl. AC .
    Disconnect all devices from motherboard : AGP/memory/drives/floppy/USB/PCI cards etc. take out the 20pin & 4pin PSU connectors and reset the motherboards
    cmos .
    Assemble PSU connectors ,only one DIMM module and graphics card and turn it on and se if you get a post .
    Just removed all components. I reset the CMOS. I then reconnected the 20pin and 4pin, 1 stick ram, and the video card (no ide devices, no mouse, keyboard cd drives) and the monitor doesn't show up. I also tried another monitor so it isn't the monitor.
    Could it have a bad AGP port?
    Any other suggestions? I am thouroughly stumped. Also the power and reset buttons don't work no matter what configuaration I put the front panel connectors in. The Power LED is lit up and it doesn't work and the reset light is off and it doesn't work.
    Also noticed one of my fans connected to one of the two other fan pins on the motherboard isn't working.
    What a nightmare.

  • 8800, battery symbol with red line through it. Won't boot. Please help!!!

    I recently bought a 8800 and when I inserted a battery, all I got was a battery symbol with a red line through it on a dim screen.  I changed batteries, tried to charge it via USB and from a wall outlet to no avail.  I tried cleaning the contacts and tried uploading t a new  OS, but it wont recognize the phone being connected when it actually is.    I am at the end of my rope with this phone and can't figure out what else to do.  Is it just gone? Please help me 
    Solved!
    Go to Solution.

    Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
    If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • IPHONE 4 – UPDATE ISSUE – IOS 7 UPDATE DELETED ALL THE CONTACTS : PLEASE HELP! PLEASE HELP!

    Hello Everyone,
    Following are the seemingly essential details in regards to this discussion :
    iPhone Model = 4
    Purchase Date = 05.Jan.2011
    Initial Activation Remark = I used my gmail email account to add contacts initially. But phone always failed to sync (back) with gmail after the initial setup. As in if I make any changes in the iPhone’s Contact List, it won’t automatically be saved to my gmail account. But I thought to keep a full phone back up on my MacBook Pro will be safer option as well.
    Latest Full Phone Backup Date = 19.Sep.2013 [via iTunes-11 on MacBook Pro-OS X 10.8.2]
    iOS 7 Update Date = 20.Sep.2013
    >>>[It went "On" Automatically when I touched to read the details, and could not stop once it got initiated - Actually I wanted to wait until some reviews were out. ****.]
    Problem = iOS 7 update deleted all the Contacts that were originally saved on the iPhone.
    Tried & Failed = I tried to restore from the available 19.Sep.2013 backup from my MacBook Pro. It restored everything but still NO CONTACTS. If I add email [orginal gmail] account's contacts then it does not show the contacts that I saved on the phone locally; around 1100.
    I am in the great trouble because my 1100+ contact list just zeroed by this new update.
    [Also, my iCloud all got screwed up. I had earlier used my wife's credit card to register for iTunes, and now my account got her name all over it. There is no option to change the name on icloud.com. I will start a new discussion for this problem.] Though I am trying not to lash out on Apple (for now), but I think that it is seriously getting into my nerves.
    Could anyone please help me to get my contacts back? I will be eternally grateful.
    I still got the Full iPhone Backup on my MacBook Pro that I did just before the update.
    Please help. Thank you!

    Yes, I did.
    It restored everything [incl. photos] but phone contacts.
    And, after restoration the iOS was still 7.
    I tried twice but still no phone contacts.
    Please help me to get my phone contacts back!

  • IPHONE 4 – UPDATE ISSUE – IOS 7 UPDATE DELETED ALL THE CONTACTS : PLEASE HELP!

    Hello Everyone,
    Following are the seemingly essential details in regards to this discussion :
    iPhone Model = 4
    Purchase Date = 06.Jan.2011
    Initial Activation Remark = I used my gmail email account to add contacts initially. But phone always failed to sync (back) with gmail after the initial setup. As in if I make any changes in the iPhone’s Contact List, it won’t automatically be saved to my gmail account. But I thought to keep a full phone back up on my MacBook Pro will be safer option as well. 
    Latest Full Phone Backup Date = 19.Sep.2013 [via iTunes-11 on MacBook Pro-OS X 10.8.2]
    iOS 7 Update Date = 20.Sep.2013 [It went "On" Automatically when I touched to read the details, and could not stop once it got initiated - Actually I wanted to wait until some reviews were out. ****.]
    Problem = iOS 7 update deleted all the Contacts that were originally saved on the iPhone.
    Tried & Failed = I tried to restore from the available 19.Sep.2013 backup from my MacBook Pro. It restored everything but still NO CONTACTS. If I add email [orginal gmail] account's contacts then it does not show the contacts that I saved on the phone locally; around 1100.
    I am in the great trouble because my 2600+ contact list just zeroed by this new update. [Also, my iCloud all got screwed up. I had earlier used my wife's credit card to register for iTunes, and now my account got her name all over it. There is no option to change the name on icloud.com. I will start a new discussion for this problem.] Though I am trying not to lash out on Apple (for now), but I think that it is seriously getting into my nerves.
    Could anyone please help me to get my contacts back? I will be eternally grateful. 
    I still got the Full iPhone Backup on my MacBook Pro that I did just before the update.
    Please help. Thank you!

    Yes, I did.
    It restored everything [incl. photos] but phone contacts.
    And, after restoration the iOS was still 7.
    I tried twice but still no phone contacts.
    Please help me to get my phone contacts back!

  • IMac G5 HD Won't Boot. Please Help.

    I have an iMac G5 (Power PC) which has been running OS 10.5.8 without any issues until today. 
    When starting, I have a grey screen with the Apple logo, but the wheel beneath keeps turning and the computer will not boot up. I've tried to start it many times, and I just get the grey screen, etc.   P.S.  I do have a Time Capsule connected via Ethernet and Time Machine was active until this problem today.  The TC is disconnected at this point, as I was afraid I'd lose that back up.
    Here is what I tried:
    I disconnected everything except the keyboard and mouse (not internet/modem/Time Capsule)
    I booted from the Leopard Disk, and ran Disk Utility. Message said the the HD appears to be OK
    I booted from Drive Genius and ran the following:
    1.  Repair-Verify:  Message was that HD appears OK
    2.  Repair-Repair:  Message was that HD appears OK
    3.  Repair-Rebuild:  Had a few invalid volumes.  Message was that the Volume Header and HD repaired successfully
    4.  Repair-Preferences;  SAID THERE IS A CORRUPT PREFERENCE:   /bin/sh:xargs:command not found (There was no way that I saw to fix this!)
    5.  Scan for Bad Blocks:  None found
    I tried to start the computer again, but I still get the grey screen, Apple Logo, and constant spinning of the wheel WITHOUT a start.  It appears that the HD is not 'Dead' but has some issue, perhaps the corrupt preference listed.
    So, I need help with my next step. Would any of the following work and if more than one, what order would be best?
    1.  Use the Leopard Install Disk to 'Restore from Time Machine Backup'?  (Never have done this, so I'm clueless)
    2.  Use the Leopard Install Disk and 'Archive and Install' the OS?  Can I do this since the HD has the updates to OS 10.5.8?
    3.  Use the Leopard Install Disk to Erase and Reinstall the OS and then migrate from the Time Capsule (Never have done this either)
    4.  AND, if none of this works, I'm assuming I could go get a new iMac and restore everything from the Time Capsule/Time Machine, even though there the OS in a new machine would be upgraded and also Intel Processor.  Yes?
    In any case....PLEASE HELP if you can.....and THANKS

    Thanks for trying to help with this :-).  I started as you suggested and here are the last few lines:
    Airport: Link down on en1
    Sept 19  17:49:16 jack-cohens-imac-g5 ReportCrash [52}: saved crashreport to /Library/logs/CrashReporter/securityd_2011-09-19-174913_jack-cohens-imac-g5.cra sh using uid: 0gid: 0, euid: 0 egid: 0
    Sept 19  17:49:18 jack-cohens-imac-g5 ntpdate [63]: can't find host time.apple.com
    Sept 19  17:49:18 jack-cohens-imac-g5 ntpdate [63]:  no servers can be used, existing
    Sept 19  17:49:18 jack-cohens-imac-g5 mds [32]: (error) server: mdsync Launch failed: (ipc/rcv) timed out
    Let me know what this means, please.  Also, I have the screen 'up', so I can give you more lines if that'll help.
    Much appreciated.
    Sandie

  • Problems with Boot Camp - PLEASE HELP!

    I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
    Message was edited by: CarlConti08

    Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
    If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
    While your in there give it a name so you can easily identify it in your windows installer.
    If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
    Verify it before exiting DU.
    Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
    Don't forget to install Leo windows drivers after installing windows.
    Kj

  • Help! Computer turns on but then will not boot up - Please Help!

    I have no idea what happened to my Apple. Someone please help me. My powerbook currently is running on no battery (recall victim) and now the entire computer is no longer functioning at all. I installed iTunes 7.0 and then the trouble began. I had to restart the computer, so I did that and then the computer just wont boot up. It goes to the grey screen which shows the Apple symbol and occurs right before my log in then just continues to read. The green light for the battery is function and nothing at all is working. The computer simply will not boot up, I have tried unplugging it for the night and then rebooting it and nothing. Please someone help, what has went wrong?

    You mentioned in your other thread that you had trouble with a cpu(0) hardware error trying to use the hardware test disk. Is this the hardware test disk which came with that particular machine? If not, then you need to find the original hardware test disk that came with that machine. If the restore disks that say 12" Powerbook include the words hardware test, use those instead and follow these directions:
    http://docs.info.apple.com/article.html?artnum=86287
    If you are using the correct hardware test disk and you get a cpu(0) error using it, then the machine has a hardware problem.

  • Mac booting problem - Please help! very, very desperate!

    My mac was being very, very slow so I turned it off, then as it it was booting it was taking ages so i restared in safe mode. While booting in safe mode the black bar at the bottom goes around 2/5 of the way across and then my macbook just switches off.
    Ive tried:
    fsck
    disk utility repair/verify
    reinstalling OS X Lion
    When i tried to repair, it said i needed to erase everything and reinstall the OS. Last night when i tried to it said both drives are locked so i couldnt. And now when i just tried again, neither drivers are appearing; the box is just blank.
    Let alone my livelyhood on the laptop, i have thousands and thousands pictures which if lost, would genuinley heartbreak me. I have much valuable data on my laptop and i really dont want to erase all data, because me being the gigantic fool that i am, i only have one time machine back up from about a year and a half ago.
    Please, please help.
    Thank you!

    humzasadique,
    unfortunately you’ve now discovered where the value proposition lies in making regular backups — if your livelihood depends upon your laptop, that lack of due diligence is rather baffling.
    Which model MacBook Pro do you have, and which version of OS X is installed on it? Do you have an external bootable drive?

  • I downloaded all my photo's from pc to my 4S and i can't delete from my phone please help

    Please Help me i am having trouble with deleting my photos I downloaded from my PC can any one help me it wasnt through i cloud please help me i am rubbish with technology ha

    You delete photos synced to your phone from your computer using iTunes.  Uncheck the photo folders you no longer want on your phone on the Photos tab of your iTunes sync settings, then sync your phone to remove them.  (If you want all of them removed, uncheck "Sync Photos" on the Photos tab, then sync your phone.)

  • My iMac won't boot up please help

    Please help me. My iMac just won't start up. Thank you

    Does it try at al, or no sign of anything at all?
    Can you boot from your Install Disc holding c key?
    Does holding Option or alt key at bootup show any choices?
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • I need help with changing my payment info and I have to accounts I want to delete one can u please help

    I need help trying to change my payment info I can't but I have to accounts and I want to delete one please help me

    We can't help.  We're not Apple.  Contact the iTunes store support.  There's a link on the bottom of every page of the iTunes store

  • I can't delete my icloud backup, please help

    i want to delete my 4s backup on icloud, because it occupied too many storage
    but a message which said "this backup cannot be deleted because it is being used to restore another device, or a backup is currently  in progress" always pop out and stop me from deleting it. i' ve been tring to delete it for the whole week, but can't figure out  a way to solve this. i never use icloud to restore my devices, and i tried log out my account from my 4s, still couldn't work. please help!!

    There is no way out.
    Restart the restore procedure and make sure you are connected to the wall power adapter and have Internet connection.
    Settings > General > Reset > Erase All Content and Settings.
    At the end it will ask whether you want to restore, choose iCloud backup.

  • Need Help to delet sort key! Please help!

    Hi,
    I have a problem in the following program.
    Source Code:
    t-belnr  = bsid-zuonr.
    SPLIT t-belnr at '#' into wk_belnr wk_x_belnr.
    CLEAR t-belnr.
        t-belnr  = wk_belnr.
        t-xblnr  = bsid-belnr.
        IF t-belnr NE space.
          s-belnr      = t-belnr.
        ELSE.
          t-belnr      = t-xblnr.
          s-belnr      = t-xblnr.
        ENDIF.
    IF t-xblnr NE space.                                    "WD041005a
          s-xblnr      = t-xblnr.                               "WD041005a
        ELSE.                                                   "WD041005a
          s-xblnr      = t-belnr.                               "WD041005a
        ENDIF.                                                  "WD041005a
        WHILE s-xblnr(1) EQ '0'.                            "INS MG130606
          SHIFT s-xblnr LEFT.                               "INS MG130606
        ENDWHILE.                                "INS MG130606
    In the final ALV.
    If first colum (t-zuonr) (sort key for the document )is blank, the document need to be deleted.
    Question:
    How can I write the code to deleted the t-zuonr when it is space?
    Please help!!!
    Thank you!!

    Try as below:
    DELETE <itab> WHERE <fld> IS INITIAL.
    i.e
    DELETE t WHERE zuonr IS INITIAL.
    Kind Regards
    Eswar

Maybe you are looking for

  • WhiteSpaceCollapse not working on textFlow created from HTML

    Is there a trick to getting whiteSpaceCollapse to work with imported HTML? Here's my current code, where value is HTML text (e.g. "<p>Blah</p>.."): textFlow = TextConverter.importToFlow( value, TextConverter.TEXT_FIELD_HTML_FORMAT); textFlow.whiteSpa

  • Problems with uploading master data in BI 2004S

    Hi all, I wanna upload master data in FI from R/3 System to BI System. I created its <b>transformation</b>. Then, I <b>migrated</b> it WITH EXPORT option. After that, I created <b>Data Transfer Process</b> (DTP), I didn't change any thing, just "Save

  • Raise log level mail

    Hi everyone, I got a weird problem with mail which I want to solve. For the solution, I need to raise the loglevel so I can see what happens when Mail communicates to the server. When I search for it, I come across some very easy methods, for OSX Ser

  • Workspace-Manager Error-numbers

    Hi everybody, i have an oracle forms-application using Workspace-manager-enabled table. My problem is that i can not handle the WM-errors directly as Exceptions for they are all treated as ORA-06510-exceptions in forms. So i have to go with the error

  • SE93: t-code

    Hi, I need an urgent explanation for the following: I am finding the information about a t-code S_BCE_68001426 with SE93 It shows like this: Transaction Code: S_BCE_68001426 Package           : SUGR Transaction Text: Roles by User Assignment Default